| Age | Commit message (Collapse) | Author |
|---|
|
Add support for SIDE and EXTRA buttons.
The constants for buttons in both SPICE and QEMU are defined as
LEFT
MIDDLE
RIGHT
UP
DOWN
SIDE
EXTRA
(same order).
"button_mask" contains for each bit the state of a button. Qemu currently
uses bits 0, 1, 2 respectively as LEFT, RIGHT, MIDDLE; also add bits 4
and 5 as UP and DOWN (using wheel movements). SPICE protocol uses
a bitmask based on the order above where LEFT is bit 0, MIDDLE is
bit 1 and so on till EXTRA being bit 6. To avoid clash with Qemu usage
SPICE bitmask from SIDE are move a bit more resulting respectively
in 0x40 and 0x80 values.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Message-id: 20200820145851.50846-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
|
|
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The SPICE input code is currently detcting 0xe1 0x1d 0x45 as
the PAUSE key make sequence and 0xe1 0x9d 0xc5 as the break
sequence. This is incorrect, because all 6 scancodes together
are the make sequence, and there is no break sequence.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727174640.30359-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The processing of the scancodes for PAUSE/BREAK has been broken since
the conversion to qcodes in:
commit 8c10e0baf0260b59a4e984744462a18016662e3e
Author: Hervé Poussineau <hpoussin@reactos.org>
Date: Thu Sep 15 22:06:26 2016 +0200
ps2: use QEMU qcodes instead of scancodes
When using a VNC client, with the raw scancode extension, the client
will send a scancode of 0xc6 for both PAUSE and BREAK. There is mistakenly
no entry in the qcode_to_number table for this scancode, so
ps2_keyboard_event() just generates a log message and discards the
scancode
When using a SPICE client, it will also send 0xc6 for BREAK, but
will send 0xe1 0x1d 0x45 0xe1 0x9d 0xc5 for PAUSE. There is no
entry in the qcode_to_number table for the scancode 0xe1 because
it is a special XT keyboard prefix not mapping to any QKeyCode.
Again ps2_keyboard_event() just generates a log message and discards
the scancode. The following 0x1d, 0x45, 0x9d, 0xc5 scancodes get
handled correctly. Rather than trying to handle 3 byte sequences
of scancodes in the PS/2 driver, special case the SPICE input
code so that it captures the 3 byte pause sequence and turns it
into a Pause QKeyCode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170727113243.23991-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Although the Qemu and spice flags currently have the same value, it
seems more correct to pass the spice flag values to
spice_server_kbd_leds(), especially considering that this function
already makes an effort to convert between the QEMU_*_LED and
SPICE_KEYBOARD_MODIFIER_* values.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170510202006.31737-1-jjongsma@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch refactors ui/input.c to support absolute axis
minimum values other than 0. All dependent calls to qemu_input_queue_abs
have been updated to explicitly supply 0 as the axis minimum value.
Signed-off-by: Philippe Voinov <philippevoinov@gmail.com>
Message-id: 20170505133952.29885-1-philippevoinov@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
All lowercase, use-dash instead of CamelCase.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
|
|
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Current tablet + spice is unusable. Regressed with the UI input rework.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This allows to pass additional information to the notifier callback
which is useful if sender and receiver do not share any other distinct
data structure.
Will be used first for the clock reset notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add support for the spice tablet interface. The tablet interface will
be registered (and then used by the spice client) as soon as a absolute
pointing device is available and used by the guest, i.e. you'll have to
configure your guest with '-usbdevice tablet'.
|
|
Open mouse channel. Now you can move the guests mouse pointer.
No tablet / absolute positioning (yet) though.
|
|
Open keyboard channel. Now you can type into the spice client and the
keyboard events are sent to your guest. You'll need some other display
like vnc to actually see the guest responding to them though.
|
