aboutsummaryrefslogtreecommitdiff
path: root/trace
AgeCommit message (Collapse)Author
2020-02-25tracing: only allow -trace to override -D if setAlex Bennée
Otherwise any -D settings the user may have made get ignored. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Robert Foley <robert.foley@linaro.org> Message-Id: <20200225124710.14152-10-alex.bennee@linaro.org>
2020-01-30qemu_set_log_filename: filename argument may be NULLSalvador Fandino
NULL is a valid log filename used to indicate we want to use stderr but qemu_set_log_filename (which is called by bsd-user/main.c) was not handling it correctly. That also made redundant a couple of NULL checks in calling code which have been removed. Signed-off-by: Salvador Fandino <salvador@qindel.com> Message-Id: <20200123193626.19956-1-salvador@qindel.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-15trace: Remove trace_mem_build_info_no_se_[bl]eRichard Henderson
It is easy for the atomic helpers to use trace_mem_build_info directly, without resorting to symbol pasting. For this usage, we cannot use trace_mem_get_info, because the MemOp does not support 16-byte accesses. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-12-19trace: replace hand-crafted pattern_glob with g_pattern_match_simpleAlex Bennée
We already use g_pattern_match elsewhere so remove the duplication. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191205122518.10010-7-alex.bennee@linaro.org>
2019-10-28trace: add mmu_index to mem_infoAlex Bennée
We are going to re-use mem_info later for plugins and will need to track the mmu_idx for softmmu code. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-28trace: expand mem_info:size_shift to 4 bitsEmilio G. Cota
This will allow us to trace 32k-long memory accesses (although our maximum is something like 256 bytes at the moment). Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> [AJB: expanded to 3->4 bits] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg: TCGMemOp is now accelerator independent MemOpTony Nguyen
Preparation for collapsing the two byte swaps, adjust_endianness and handle_bswap, along the I/O path. Target dependant attributes are conditionalized upon NEED_CPU_H. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-08-27trace: Clarify DTrace/SystemTap help messagePhilippe Mathieu-Daudé
Most tracing backends are implemented within QEMU, except the DTrace/SystemTap backends. One side effect is when running 'qemu -trace help', an incomplete list of trace events is displayed when using the DTrace/SystemTap backends. This is partly due to trace events registered as modules with trace_init(), and since the events are not used within QEMU, the linker optimize and remove the unused modules (which is OK in this particular case). Currently only the events compiled in trace-root.o and in the last trace.o member of libqemuutil.a are linked, resulting in an incomplete list of events. To avoid confusion, improve the help message, recommending to use the proper systemtap script to display the events list. Before: $ lm32-softmmu/qemu-system-lm32 -trace help 2>&1 | wc -l 70 After: $ lm32-softmmu/qemu-system-lm32 -trace help Run 'qemu-trace-stap list qemu-system-lm32' to print a list of names of trace points with the DTrace/SystemTap backends. $ qemu-trace-stap list qemu-system-lm32 | wc -l 1136 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190823142203.5210-1-philmd@redhat.com Message-Id: <20190823142203.5210-1-philmd@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-16trace: Do not include qom/cpu.h into generated trace.hMarkus Armbruster
docs/devel/tracing.txt explains "since many source files include trace.h, [the generated trace.h use] a minimum of types and other header files included to keep the namespace clean and compile times and dependencies down." Commit 4815185902 "trace: Add per-vCPU tracing states for events with the 'vcpu' property" made them all include qom/cpu.h via control-internal.h. qom/cpu.h in turn includes about thirty headers. Ouch. Per-vCPU tracing is currently not supported in sub-directories' trace-events. In other words, qom/cpu.h can only be used in trace-root.h, not in any trace.h. Split trace/control-vcpu.h off trace/control.h and trace/control-internal.h. Have the generated trace.h include trace/control.h (which no longer includes qom/cpu.h), and trace-root.h include trace/control-vcpu.h (which includes it). The resulting improvement is a bit disappointing: in my "build everything" tree, some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h) depend on a trace.h, and about 600 of them no longer depend on qom/cpu.h. But more than 1300 others depend on trace-root.h. More work is clearly needed. Left for another day. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-8-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-04-18trace: Simplify how st_print_trace_file_status() printsMarkus Armbruster
st_print_trace_file_status() takes an fprintf()-like callback and a FILE * to pass to it. Its only caller hmp_trace_file() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The type-punning is ugly. Drop the callback, and call qemu_printf() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-3-armbru@redhat.com>
2019-03-22trace: handle tracefs path truncationStefan Hajnoczi
If the tracefs mountpoint has a very long path we may exceed PATH_MAX. This is a system misconfiguration and the user must resolve it so that applications can perform path-based system calls successfully. This issue does not occur on real-world systems since tracefs is mounted on /sys/kernel/debug/tracing/, but the compiler is smart enough to foresee the possibility and warn about the unchecked snprintf(3) return value. This patch fixes the compiler warning. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-id: 20190321170831.6539-2-stefanha@redhat.com Message-Id: <20190321170831.6539-2-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-11build: get rid of target-obj-yPaolo Bonzini
It is possible to specify the trace/ directory already in objs-y; there is no need to have a separate unnest-vars invocation. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-12trace: simple style changesLarry Dewey
This changes two lines in simple.c that end with a comma, and replaces them with a semi-colon. Signed-off-by: Larry Dewey <ldewey@suse.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20181127190849.10558-1-ldewey@suse.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-07-19tracing: Use double-dash spelling for trace optionYaowei Bai
The '-trace' and '--trace' spellings are only both supported in qemu binary, while for qemu-nbd or qemu-img only '--trace' spelling is supported. So for the consistency of trace option invocation, we should use double-dash spelling in our documentation. This's also mentioned in https://wiki.qemu.org/BiteSizedTasks#Consistent_option_usage_in_documentation . Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1530674247-31200-1-git-send-email-baiyaowei@cmss.chinamobile.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-29Merge remote-tracking branch 'remotes/berrange/tags/min-glib-pull-request' ↵Peter Maydell
into staging glib: update the min required version This updates the minimum required glib version to 2.40 # gpg: Signature made Fri 29 Jun 2018 12:24:58 BST # gpg: using RSA key BE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/min-glib-pull-request: glib: enforce the minimum required version and warn about old APIs glib: bump min required glib library version to 2.40 util: remove redundant include of glib.h and add osdep.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29glib: bump min required glib library version to 2.40Daniel P. Berrangé
Per supported platforms doc[1], the various min glib on relevant distros is: RHEL-7: 2.50.3 Debian (Stretch): 2.50.3 Debian (Jessie): 2.42.1 OpenBSD (Ports): 2.54.3 FreeBSD (Ports): 2.50.3 OpenSUSE Leap 15: 2.54.3 SLE12-SP2: 2.48.2 Ubuntu (Xenial): 2.48.0 macOS (Homebrew): 2.56.0 This suggests that a minimum glib of 2.42 is a reasonable target. The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only has glib 2.40.0, and this is needed for testing during merge. Thus an exception is made to the documented platform support policy to allow for all three current LTS releases to be supported. Docker jobs that not longer satisfy this new min version are removed. [1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-28move public invalidate APIs out of translate-all.{c,h}, clean upPaolo Bonzini
Place them in exec.c, exec-all.h and ram_addr.h. This removes knowledge of translate-all.h (which is an internal header) from several files outside accel/tcg and removes knowledge of AddressSpace from translate-all.c (as it only operates on ram_addr_t). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-27trace: add trace_mem_build_info_no_se_be/leEmilio G. Cota
These will be used by the following commit. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 1527028012-21888-5-git-send-email-cota@braap.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-27trace: expand mem_info:size_shift to 3 bitsEmilio G. Cota
This will allow us to trace 16B-long memory accesses. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 1527028012-21888-4-git-send-email-cota@braap.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-27trace: simplify trace_mem functionsEmilio G. Cota
Add some defines for the mem_info bits, simplify trace_mem_build_info, and also simplify trace_mem_get_info by making it a wrapper around trace_mem_build_info. This paves the way for increasing size_shift by one bit. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 1527028012-21888-3-git-send-email-cota@braap.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01trace: use local path for local headersMichael S. Tsirkin
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2017-12-18trace: Try using tracefs firstNamhyung Kim
Recent Linux kernel provides separate tracefs which doesn't need to be mounted on the debugfs. Although most systems mount it at the traditional place on the debugfs, it'd be safer to check tracefs first. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-18trace: Generalize searching for debugfsNamhyung Kim
The find_debugfs() can be shared to find a different filesystem like tracefs. So make it more general and rename to find_mount(). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-18trace: Simplify find_debugfs()Namhyung Kim
The return vale of find_debugfs() is 1 if it could find a mount point of debugfs. It can be saved in the while loop instead of checking it again. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-09-19Convert single line fprintf(.../n) to warn_report()Alistair Francis
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \ {} + Some of the lines were manually edited to reduce the line length to below 80 charecters. The #include lines were manually updated to allow the code to compile. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips] Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19Convert remaining error_report() to warn_report()Alistair Francis
In a previous patch (3dc6f8693694a649a9c83f1e2746565b47683923) we converted uses of error_report("warning:"... to use warn_report() instead. This was to help standardise on a single method of printing warnings to the user. There appears to have been some cases that slipped through in patch sets applied around the same time, this patch catches the few remaining cases. All of the warnings were changed using this command: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. Two messages were manually fixed up as well. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <eec8cba0d5434bd828639e5e45f12182490ff47d.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15trace: Immediately apply per-vCPU state changes if a vCPU is being createdLluís Vilanova
Right now, function trace_event_set_vcpu_state_dynamic() asynchronously enables events in the case a vCPU is executing TCG code. If the vCPU is being created this makes some events like "guest_cpu_enter" to not be traced. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Emilio G. Cota <cota@braap.org> Message-id: 150525662577.19850.13767570977540117247.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01trace: add trace_event_get_state_backends()Stefan Hajnoczi
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so the following trace event will not fire when solely enabled by SystemTap or LTTng UST: if (trace_event_get_state(TRACE_MY_EVENT)) { str = g_strdup_printf("Expensive string to generate ...", ...); trace_my_event(str); g_free(str); } Add trace_event_get_state_backends() to fetch backend dstate. Those backends that use QEMU dstate fetch it as part of generate_h_backend_dstate(). Update existing trace_event_get_state() callers to use trace_event_get_state_backends() instead. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170731140718.22010-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17exec: [tcg] Use different TBs according to the vCPU's dynamic tracing stateLluís Vilanova
Every vCPU now uses a separate set of TBs for each set of dynamic tracing event state values. Each set of TBs can be used by any number of vCPUs to maximize TB reuse when vCPUs have the same tracing state. This feature is later used by tracetool to optimize tracing of guest code events. The maximum number of TB sets is defined as 2^E, where E is the number of events that have the 'vcpu' property (their state is stored in CPUState->trace_dstate). For this to work, a change on the dynamic tracing state of a vCPU will force it to flush its virtual TB cache (which is only indexed by address), and fall back to the physical TB cache (which now contains the vCPU's dynamic tracing state as part of the hashing function). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17trace: [tcg] Delay changes to dynamic state when translatingLluís Vilanova
This keeps consistency across all decisions taken during translation when the dynamic state of a vCPU is changed in the middle of translating some guest code. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 149915750615.6295.3713699402253529487.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17trace: Allocate cpu->trace_dstate in placeLluís Vilanova
There's little point in dynamically allocating the bitmap if we know at compile-time the max number of events we want to support. Thus, make room in the struct for the bitmap, which will make things easier later: this paves the way for upcoming changes, in which we'll use a u32 to fully capture cpu->trace_dstate. This change also increases performance by saving a dereference and improving locality--note that this is important since upcoming work makes reading this bitmap fairly common. Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 149915725977.6295.15069969323605305641.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-13Convert error_report() to warn_report()Alistair Francis
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-11trace: Fix early setting of events with the "vcpu" propertyLluís Vilanova
Events with the "vcpu" property need to be set globally (i.e., as if they didn't have that property) while we have not yet created any vCPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 149838891852.10366.11525912227070211356.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-28trace: fix tcg tracing build breakageStefan Hajnoczi
Commit 0ab8ed18a6fe98bfc82705b0f041fbf2a8ca5b60 ("trace: switch to modular code generation for sub-directories") forgot to convert "tcg" trace events to the modular code generation approach where each sub-directory has its own trace-events file. This patch fixes compilation for "tcg" trace events. Currently they are only used in the root ./trace-events file. "tcg" trace events can only be used in the root ./trace-events file for the time being. Reported-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170327131718.18268-1-stefanha@redhat.com Suggested-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-16trace: ensure $(tracetool-y) is defined in top level makefileDaniel P. Berrange
The build rules for trace files have a dependancy on $(tracetool-y). This variable populated in the trace/Makefile.objs file and thus its definition gets pulled into the top level makefile. This happens too late in the process though, so by the time $(tracetool-y) is defined, make has already evaluated $(tracetool-y) in the dependancies and found it to be empty. The result is that when the tracetool source is changed, the generated files are not rebuilt. The solution is to define the variable in the top level makefile too Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Message-id: 20170315123421.28815-1-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: move setting of group name into MakefilesDaniel P. Berrange
Having tracetool.py figure out the right group name from just the input filename is not practical when considering the different build vs src path combinations. Instead simply take the group name as a command line arg from the Makefile, which can trivially provide the right name. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-6-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16trace: Add event "guest_cpu_exit"Lluís Vilanova
Signals the hot-unplugging of a virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278748597.1404.10546320797997984932.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16trace: Fix dynamic event state on vCPU hot-unplugLluís Vilanova
We need to disable per-vCPU events on a vCPU that is hot-unplugged to keep the dynamic event state global counters consistent. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278748055.1404.1570530281528619895.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16trace: Lock vCPU list when initializing dynamic tracing stateLluís Vilanova
Fixes potential corruption when a vCPU is hot-(un)plugged while initializing the current one. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278747515.1404.6538173443841279200.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: pass trace-events to tracetool as a positional paramDaniel P. Berrange
Instead of reading the contents of 'trace-events' from stdin, accept the filename as a positional parameter. This also allows for reading from multiple files, though this facility is not used at this time. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-20-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: get rid of generated-events.h/generated-events.cDaniel P. Berrange
Currently the generated-events.[ch] files contain the event dstates, constants and TraceEvent structs, while the generated-tracers.[ch] files contain the actual trace probe logic. With the removal of usage of the event enums from the API there is no longer any compelling reason for the separation between these files. The generated-events.h content is only ever needed from the generated-tracers.[ch] files. The enums/constants/structs from generated-events.[ch] are thus moved into the generated-tracers.[ch], so that there is one less file to be generated. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: dynamically allocate event IDs at runtimeDaniel P. Berrange
Instead of having the code generator assign event IDs and event VCPU IDs, assign them when the events are registered at runtime. This will allow code to be generated from individual trace-events without having to figure out globally unique numbering at build time. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-16-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: dynamically allocate trace_dstate in CPUStateDaniel P. Berrange
The CPUState struct has a bitmap tracking which VCPU events are currently active. This is indexed based on the event ID values, and sized according the maximum TraceEventVCPUID enum value. When we start dynamically assigning IDs at runtime, we can't statically declare a bitmap without making an assumption about the max event count. This problem can be solved by dynamically allocating the per-CPU dstate bitmap. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 07:54:26 +0000