aboutsummaryrefslogtreecommitdiff
path: root/trace
AgeCommit message (Collapse)Author
2014-08-12trace: [tcg] Generate TCG tracing routinesLluís Vilanova
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for tracing events in guest code: * trace_${event}_tcg Convenience wrapper that calls the translation-time tracer 'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to generate the TCG code to later trace the event at execution time. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Define TCG tracing helper routine wrappersLluís Vilanova
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG helper wrappers. These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native and TCG argument types to TCG types and call the actual TCG helpers ('gen_helper_trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Define TCG tracing helper routinesLluís Vilanova
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace events in guest code at execution time. The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native argument types to their original types (as defined in "trace-events") and call the tracing routine ('trace_${event}_exec'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12trace: [tcg] Declare TCG tracing helper routinesLluís Vilanova
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace events in guest code at execution time ('trace_${event}_exec_proxy'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-10glib-compat.h: add new thread API emulation on top of pre-2.31 APIMichael Tokarev
Thread API changed in glib-2.31 significantly. Before that version, conditionals and mutexes were only allocated dynamically, using _new()/_free() interface. in 2.31 and up, they're allocated statically as regular variables, and old interface is deprecated. (Note: glib docs says the new interface is available since version 2.32, but it was actually introduced in version 2.31). Create the new interface using old primitives, by providing non-opaque definitions of the base types (GCond and GMutex) using GOnces. Replace #ifdeffery around GCond and GMutex in trace/simple.c and coroutine-gthread.c too because it does not work anymore with the new glib-compat.h. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [Use GOnce to support lazy initialization; introduce CompatGMutex and CompatGCond. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-09trace: Replace fprintf with error_report and print locationAlexey Kardashevskiy
This replaces fprintf(stderr) with error_report. This moves local variables to the beginning of the function to comply with QEMU's coding style. Suggested-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-09trace: Multi-backend tracingLluís Vilanova
Adds support to compile QEMU with multiple tracing backends at the same time. For example, you can compile QEMU with: $ ./configure --enable-trace-backends=ftrace,dtrace Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system. This patch allows having both available without recompiling QEMU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-09trace: Replace error with warning if event is not definedAlexey Kardashevskiy
At the moment QEMU exits if trace point is not defined which makes a developer life harder if he has to switch between branches with different traces implemented. This replaces error+exit wit WARNING if the tracepoint does not exist or not traceable. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-09trace: add pid field to simpletrace recordStefan Hajnoczi
It is useful to know the QEMU process ID when working with traces from multiple VMs. Although the trace filename may contain the pid, tools that aggregate traces or even trace globally need somewhere to record the pid. There is a reserved field in the trace event header struct that we can use. It is not necessary to bump the simpletrace file format version number because it has already been incremented for the QEMU 2.1 release cycle in commit "trace: [simple] Bump up log version number". Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-07trace: [tracetool] Minimize the amount of per-backend codeLluís Vilanova
Backends now only contain the essential backend-specific code, and most of the work is moved to frontend code. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-07trace: [simple] Bump up log version numberLluís Vilanova
The following tracetool cleanup changes the event numbering policy. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-25osdep: initialize glib threads in all QEMU toolsStefan Hajnoczi
glib versions prior to 2.31.0 require an explicit g_thread_init() call to enable multi-threading. Failure to initialize threading causes glib to take single-threaded code paths without synchronization. For example, the g_slice allocator will crash due to race conditions. Fix this for all QEMU tool programs (qemu-nbd, qemu-io, qemu-img) by moving the g_thread_init() call from vl.c:main() into a new osdep.c:thread_init() constructor function. thread_init() has __attribute__((constructor)) and is automatically invoked by the runtime during startup. We can now drop the "simple" trace backend's g_thread_init() call since thread_init() already called it. Note that we must keep coroutine-gthread.c's g_thread_init() call which is located in a constructor function. There is no guarantee for constructor function ordering so thread_init() may only be called later. Reported-by: Mario de Chenno <mario.dechenno@unina2.it> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-12trace: Fix build warnings for Win32 buildPeter Maydell
The Win32 build warns about trace/control-internal.h: warning: 'trace_event_count' declared inline after being called Fix this by simply reordering trace_event_id() and trace_event_count(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-19Adapt Makefiles to the new LTTng ust interfaceMohamad Gebai
Add generation of new files for LTTng ust. Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-27trace: add glib 2.32+ static GMutex supportStefan Hajnoczi
The GStaticMutex API was deprecated in glib 2.32. We cannot switch over to GMutex unconditionally since we would drop support for older glib versions. But the deprecated API warnings during build are annoying so use static GMutex when possible. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-27trace: [simple] Do not include "trace/simple.h" in generated tracer headersLluís Vilanova
The header is not necessary, given that the simple backend does not define any inlined tracing routines. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-03trace: Add ftrace tracing backendEiichi Tsukata
This patch adds a ftrace tracing backend which sends trace event to ftrace marker file. You can effectively compare qemu trace data and kernel(especially, kvm.ko when using KVM) trace data. The ftrace backend is restricted to Linux only. To try out the ftrace backend: $ ./configure --trace-backend=ftrace $ make if you use KVM, enable kvm events in ftrace: # sudo echo 1 > /sys/kernel/debug/tracing/events/kvm/enable After running qemu by root user, you can get the trace: # cat /sys/kernel/debug/tracing/trace Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: rebuild generated-events.o when configuration changesStefan Hajnoczi
Make sure to rebuild generated-events.o when ./configure options change. This prevents linker errors when a stale generated-events.o gets linked with code compiled against fresh headers. For example, try building with ./configure --enable-trace-backend=stderr followed by ./configure --enable-trace-backend=dtrace. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: [stderr] Port to generic event information and new control interfaceLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: [simple] Port to generic event information and new control interfaceLluís Vilanova
The backend is forced to dump event numbers using 64 bits, as TraceEventID is an enum. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: [default] Port to generic event information and new control interfaceLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: Provide a detailed event control interfaceLluís Vilanova
This interface decouples event obtaining from interaction. Events can be obtained through three different methods: * identifier * name * simple wildcard pattern Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28trace: Provide a generic tracing event descriptorLluís Vilanova
Uses tracetool to generate a backend-independent tracing event description (struct TraceEvent). The values for such structure are generated with the non-public "events" backend ("events-c" frontend). The generation of the defines to check if an event is statically enabled is also moved to the "events" backend ("events-h" frontend). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-12trace: deal with deprecated glib thread functionsStefan Hajnoczi
g_thread_create() was deprecated in favor of g_thread_new() and g_cond_new() was deprecated in favor of GCond initialization. If the host has glib 2.31 or newer, avoid using the deprecated functions. This patch solves compiler warnings that are generated when glib's deprecated functions are used. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360676045-9204-3-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-12trace: use glib atomic int typesStefan Hajnoczi
Juan reported that RHEL 6.4 hosts give compiler warnings because we use unsigned int while glib prototypes use volatile gint in trace/simple.c. trace/simple.c:223: error: pointer targets in passing argument 1 of 'g_atomic_int_compare_and_exchange' differ in signedness These variables are only accessed with glib atomic int functions so let's play it by the book and use volatile gint. Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1360676045-9204-2-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-05trace: Clean up the "try to update atomic until it worked" loopsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-05trace: Direct access of atomics is verboten, use the APIMarkus Armbruster
The GLib Reference Manual says: It is very important that all accesses to a particular integer or pointer be performed using only this API and that different sizes of operation are not mixed or used on overlapping memory regions. Never read or assign directly from or to a value -- always use this API. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-05trace: Fix simple trace dropped event record for big endianMarkus Armbruster
We use atomic operations to keep track of dropped events. Inconveniently, GLib supports only int and void * atomics, but the counter dropped_events is uint64_t. Can't stop commit 62bab732: a quick (gint *)&dropped_events bludgeons the compiler into submission. That cast is okay only when int is exactly 64 bits wide, which it commonly isn't. If int is even wider, we clobber whatever follows dropped_events. Not worth worrying about, as none of the machines that interest us have such morbidly obese ints. That leaves the common case: int narrower than 64 bits. Harmless on little endian hosts: we just don't access the most significant bits of dropped_events. They remain zero. On big endian hosts, we use only the most significant bits of dropped_events as counter. The least significant bits remain zero. However, we write out the full value, which is the correct counter shifted left a bunch of places. Fix by changing the variables involved to int. There's another, equally suspicious-looking (gint *)&trace_idx argument to g_atomic_int_compare_and_exchange(), but that one casts unsigned *, so it's okay. But it's also superfluous, because GLib's atomic int operations work just fine for unsigned. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-30Makefile: clean timestamp generation ruleMichael S. Tsirkin
create timestamp by rule without sideeffects. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-12build: fold trace-obj-y into libqemuutil.aPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: some simplifications for "trace/Makefile.objs"Paolo Bonzini
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: move dtrace rules to rules.makPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-23build: Use separate makefile for "trace/"Lluís Vilanova
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> -- Changes in v2: * Do not depend on "qemu-timer-common.o". * Use "$(obj)" in rules to refer to the build sub-directory. * Remove dependencies against "$(GENERATED_HEADERS)". Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-16trace: allow disabling events in events fileGerd Hoffmann
Disable trace events prefixed with a '-'. Useful to enable a group of tracepoints with exceptions, like this: usb_xhci_port_* -usb_xhci_port_read which will enable all xhci port tracepoints except reads. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-08-14trace/simple: Replace asprintf by g_strdup_printfStefan Weil
asprintf is not available for all hosts. g_strdup_printf is more portable and simplifies the code because if does not need error handling. The static variable does not need an explicit assignment to be NULL. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-14trace: avoid pointer aliasing in trace_record_finish()Harsh Prateek Bora
Declaring a TraceRecord on the stack works fine. No need for a uint8_t array and pointer aliasing. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-14trace: drop unused TraceBufferRecord->next_tbuf_idx fieldHarsh Prateek Bora
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-14trace: remove unnecessary write_to_buffer() typecastingHarsh Prateek Bora
The buffer argument is void* so it is not necessary to cast. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-14trace: rename TraceRecordHeader to TraceLogHeaderHarsh Prateek Bora
The TraceRecordHeader is really the header for the entire trace log file. It's not per-record header so make this obvious by renaming it. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19Simpletrace v2: Support multiple arguments, strings.Harsh Prateek Bora
Existing simpletrace backend allows to trace at max 6 args and does not support strings. This newer tracelog format gets rid of fixed size records and therefore allows to trace variable number of args including strings. Sample trace with strings: v9fs_version 0.000 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L v9fs_version_return 6.705 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19monitor: remove unused do_info_traceHarsh Prateek Bora
Going forward with simpletrace v2 variable size trace records, we cannot have a generic function to print trace event info and therefore this interface becomes invalid. As per Stefan Hajnoczi: "This command is only available from the human monitor. It's not very useful because it historically hasn't been able to pretty-print events or show them in the right order (we use a ringbuffer but it prints them out from index 0). Therefore, I don't think we're under any obligation to keep this command around. No one has complained about it's limitations - I think this is a sign that no one has used it. I'd be okay with a patch that removes it." Ref: http://lists.gnu.org/archive/html/qemu-devel/2012-01/msg01268.html Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19trace: added ability to comment out events in the listAlexey Kardashevskiy
It is convenient for debug to be able to switch on/off some events easily. The only possibility now is to remove event name from the file completely and type it again when we want it back. The patch adds '#' symbol handling as a comment specifier. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-06-08trace/simple.c: fix deprecated glib2 interfaceHarsh Prateek Bora
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12trace: make trace_thread_create() use its function argJun Koi
This patch makes trace_thread_create() to use its function arg to initialize thread. The other choice is to make this a function to use void arg, but i prefer this way. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-20g_thread_init users: don't call it if glib >= 2.31Alon Levy
since commit f9b29ca03 included in release 2.31 (docs below say 2.32 but that is not correct) and onwards g_thread_init is deprecated and calling it is not required: http://developer.gnome.org/glib/unstable/glib-Deprecated-Thread-APIs.html#g-thread-init g_thread_init has been deprecated since version 2.32 and should not be used in newly-written code. This function is no longer necessary. The GLib threading system is automatically initialized at the start of your program. Fixes bulid failure when warnings are treated as errors on fedora 17. I only tested the change to vl.c, and copy pasted to the two other locations (couldn't decide if a wrapper for calling g_thread_init is uglier). Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01trace: Add wildcard trace event supportMark Wu
A basic wildcard matching is supported in both the monitor command "trace-event" and the events list file. That means you can enable/disable the events having a common prefix in a batch. For example, virtio-blk trace events could be enabled using: trace-event virtio_blk_* on Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: use binary file open mode in simpletraceStefan Hajnoczi
For Windows portability the simple trace backend must use the 'b' file open mode. This prevents the stdio library from mangling 0x0a/0x0d newline characters. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: portable simple trace backend using glibStefan Hajnoczi
Convert the simple trace backend to glib so that it works under Windows. We cannot use pthread directly but glib provides portable abstractions. Also use glib atomics instead of newish gcc builtins which may not be supported on Windows toolchains. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01trace: [stderr] add support for dynamically enabling/disabling eventsLluís
Uses the generic interface provided in "trace/control.h" in order to provide a programmatic interface as well as command line and monitor controls. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 21:26:14 +0000