| Age | Commit message (Collapse) | Author |
|---|
|
Honor the expected behavior of syncfs() to synchronously flush all data
and metadata to disk on linux systems.
If virtiofsd is started with '-o announce_submounts', the client is
expected to send a FUSE_SYNCFS request for each individual submount.
In this case, we just create a new file descriptor on the submount
inode with lo_inode_open(), call syncfs() on it and close it. The
intermediary file is needed because O_PATH descriptors aren't
backed by an actual file and syncfs() would fail with EBADF.
If virtiofsd is started without '-o announce_submounts' or if the
client doesn't have the FUSE_CAP_SUBMOUNTS capability, the client
only sends a single FUSE_SYNCFS request for the root inode. The
server would thus need to track submounts internally and call
syncfs() on each of them. This will be implemented later.
Note that syncfs() might suffer from a time penalty if the submounts
are being hammered by some unrelated workload on the host. The only
solution to prevent that is to avoid shared mounts.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220215181529.164070-2-groug@kaod.org>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add capability to enable and parse security context as sent by client
and put into fuse_req. Filesystems now can get security context from
request and set it on files during creation.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-6-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
->capable keeps track of what capabilities kernel supports and ->wants keep
track of what capabilities filesytem wants.
Right now these fields are 32bit in size. But now fuse has run out of
bits and capabilities can now have bit number which are higher than 31.
That means 32 bit fields are not suffcient anymore. Increase size to 64
bit so that we can add newer capabilities and still be able to use existing
code to check and set the capabilities.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-5-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add some code to parse extended "struct fuse_init_in". And use a local
variable "flag" to represent 64 bit flags. This will make it easier
to add more features without having to worry about two 32bit flags (->flags
and ->flags2) in "fuse_struct_in".
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-4-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed up long line
|
|
Kernel version 5.17 has increased the size of "struct fuse_init_in" struct.
Previously this struct was 16 bytes and now it has been extended to
64 bytes in size.
Once qemu headers are updated to latest, it will expect to receive 64 byte
size struct (for protocol version major 7 and minor > 6). But if guest is
booting older kernel (older than 5.17), then it still sends older
fuse_init_in of size 16 bytes. And do_init() fails. It is expecting
64 byte struct. And this results in mount of virtiofs failing.
Fix this by parsing 16 bytes only for now. Separate patches will be
posted which will parse rest of the bytes and enable new functionality.
Right now we don't support any of the new functionality, so we don't
lose anything by not parsing bytes beyond 16.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-2-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add the bits to enable support for setxattr_ext if fuse offers it. Do not
enable it by default yet. Let passthrough_ll opt-in. Enabling it by deafult
kind of automatically means that you are taking responsibility of clearing
SGID if ACL is set.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-4-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up double def in fuse_common.h
|
|
With kernel header updates fuse_setxattr_in struct has grown in size.
But this new struct size only takes affect if user has opted in
for fuse feature FUSE_SETXATTR_EXT otherwise fuse continues to
send "fuse_setxattr_in" of older size. Older size is determined
by FUSE_COMPAT_SETXATTR_IN_SIZE.
Fix this. If we have not opted in for FUSE_SETXATTR_EXT, then
expect that we will get fuse_setxattr_in of size FUSE_COMPAT_SETXATTR_IN_SIZE
and not sizeof(struct fuse_sexattr_in).
Fixes: 278f064e4524 ("Update Linux headers to 5.13-rc4")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-2-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
A well behaved FUSE client uses FUSE_CREATE to create files. It isn't
supposed to pass O_CREAT along a FUSE_OPEN request, as documented in
the "fuse_lowlevel.h" header :
/**
* Open a file
*
* Open flags are available in fi->flags. The following rules
* apply.
*
* - Creation (O_CREAT, O_EXCL, O_NOCTTY) flags will be
* filtered out / handled by the kernel.
But if the client happens to do it anyway, the server ends up passing
this flag to open() without the mandatory mode_t 4th argument. Since
open() is a variadic function, glibc will happily pass whatever it
finds on the stack to the syscall. If this file is compiled with
-D_FORTIFY_SOURCE=2, glibc will even detect that and abort:
*** invalid openat64 call: O_CREAT or O_TMPFILE without mode ***: terminated
Specifying O_CREAT with FUSE_OPEN is a protocol violation. Check this
in do_open(), print out a message and return an error to the client,
EINVAL like we already do when fuse_mbuf_iter_advance() fails.
The FUSE filesystem doesn't currently support O_TMPFILE, but the very
same would happen if O_TMPFILE was passed in a FUSE_OPEN request. Check
that as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210624101809.48032-1-groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the allocation and deallocation of fuse_session structs
from calloc() and free() calls to g_try_new0() and g_free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-4-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the calls to malloc()/calloc() and their respective
calls to free() of iovec structs with GLib's allocation and
deallocation functions and used g_autofree when appropriate.
Replaced the allocation of in_sg_cpy to g_new() instead of a call
to calloc() and a null-checking assertion. Not g_new0()
because the buffer is immediately overwritten using memcpy.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210427181333.148176-1-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the allocation and deallocation of fuse_req structs
using calloc()/free() call pairs to a GLib's g_try_new0()
and g_free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-2-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
I confused myself wandering if this had been merged by looking at the
help output. It seems fuse_opt doesn't automagically add to help
output so lets do it now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Updates: f6698f2b03 ("tools/virtiofsd: add support for --socket-group")
Message-Id: <20210323165308.15244-5-alex.bennee@linaro.org>
|
|
Currently we created a thread pool (With 64 max threads per pool) for
each virtqueue. We hoped that this will provide us with better scalability
and performance.
But in practice, we are getting better numbers in most of the cases
when we don't create a thread pool at all and a single thread per
virtqueue receives the request and processes it.
Hence, I am proposing that we switch to no thread pool by default
(equivalent of --thread-pool-size=0). This will provide out of
box better performance to most of the users. In fact other users
have confirmed that not using a thread pool gives them better
numbers. So why not use this as default. It can be changed when
somebody can fix the issues with thread pool performance.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210210182744.27324-2-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This patch adds basic support for FUSE_HANDLE_KILLPRIV_V2. virtiofsd
can enable/disable this by specifying option "-o killpriv_v2/no_killpriv_v2".
By default this is enabled as long as client supports it
Enabling this option helps with performance in write path. Without this
option, currently every write is first preceeded with a getxattr() operation
to find out if security.capability is set. (Write is supposed to clear
security.capability). With this option enabled, server is signing up for
clearing security.capability on every WRITE and also clearing suid/sgid
subject to certain rules. This gets rid of extra getxattr() call for every
WRITE and improves performance. This is true when virtiofsd is run with
option -o xattr.
What does enabling FUSE_HANDLE_KILLPRIV_V2 mean for file server implementation.
It needs to adhere to following rules. Thanks to Miklos for this summary.
- clear "security.capability" on write, truncate and chown unconditionally
- clear suid/sgid in case of following. Note, sgid is cleared only if
group executable bit is set.
o setattr has FATTR_SIZE and FATTR_KILL_SUIDGID set.
o setattr has FATTR_UID or FATTR_GID
o open has O_TRUNC and FUSE_OPEN_KILL_SUIDGID
o create has O_TRUNC and FUSE_OPEN_KILL_SUIDGID flag set.
o write has FUSE_WRITE_KILL_SUIDGID
>From Linux VFS client perspective, here are the requirements.
- caps are always cleared on chown/write/truncate
- suid is always cleared on chown, while for truncate/write it is cleared
only if caller does not have CAP_FSETID.
- sgid is always cleared on chown, while for truncate/write it is cleared
only if caller does not have CAP_FSETID as well as file has group execute
permission.
virtiofsd implementation has not changed much to adhere to above ruls. And
reason being that current assumption is that we are running on Linux
and on top of filesystems like ext4/xfs which already follow above rules.
On write, truncate, chown, seucurity.capability is cleared. And virtiofsd
drops CAP_FSETID if need be and that will lead to clearing of suid/sgid.
But if virtiofsd is running on top a filesystem which breaks above assumptions,
then it will have to take extra actions to emulate above. That's a TODO
for later when need arises.
Note: create normally is supposed to be called only when file does not
exist. So generally there should not be any question of clearing
setuid/setgid. But it is possible that after client checks that
file is not present, some other client creates file on server
and this race can trigger sending FUSE_CREATE. In that case, if
O_TRUNC is set, we should clear suid/sgid if FUSE_OPEN_KILL_SUIDGID
is also set.
v3:
- Resolved conflicts due to lo_inode_open() changes.
- Moved capability code in lo_do_open() so that both lo_open() and
lo_create() can benefit from common code.
- Dropped changes to kernel headers as these are part of qemu already.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210208224024.43555-3-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The 'ch' will be NULL in the following stack:
send_notify_iov()->fuse_send_msg()->virtio_send_msg(), and
this may lead to NULL pointer dereferenced in virtio_send_msg().
But send_notify_iov() was never called, so remove the useless code
about send_notify_iov() to fix this problem.
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <20201214121615.29967-1-alex.chen@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688d.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
|
|
fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.
fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-3-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
FUSE_SUBMOUNTS is a pure indicator by the kernel to signal that it
supports submounts. It does not check its state in the init reply, so
there is nothing for fuse_lowlevel.c to do but to check its existence
and copy it into fuse_conn_info.capable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-2-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This reverts the following commits due to their basis on a bogus
linux kernel header update:
c93a656f7b65 ("tests/acceptance: Add virtiofs_submounts.py")
45ced7ca2f27 ("tests/acceptance/boot_linux: Accept SSH pubkey")
08dce386e77e ("virtiofsd: Announce sub-mount points")
eba8b096c17c ("virtiofsd: Store every lo_inode's parent_dev")
ede24b6be798 ("virtiofsd: Add fuse_reply_attr_with_flags()")
e2577435d343 ("virtiofsd: Add attr_flags to fuse_entry_param")
2f10415abfc5 ("virtiofsd: Announce FUSE_ATTR_FLAGS")
97d741cc96dd ("linux/fuse.h: Pull in from Linux")
Cc: Max Reitz <mreitz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 160385090886.20017.13382256442750027666.stgit@gimli.home
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The plain fuse_reply_attr() function does not allow setting
fuse_attr.flags, so add this new function that does.
Make fuse_reply_attr() a wrapper around it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-5-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.
fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-4-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The fuse_attr.flags field is currently just initialized to 0, which is
valid. Thus, there is no reason not to always announce FUSE_ATTR_FLAGS
(when the kernel supports it).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-3-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
If you like running QEMU as a normal user (very common for TCG runs)
but you have to run virtiofsd as a root user you run into connection
problems. Adding support for an optional --socket-group allows the
users to keep using the command line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200925125147.26943-2-alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Split long line
|
|
Fix warning reported by Clang static code analyzer:
CC tools/virtiofsd/fuse_lowlevel.o
tools/virtiofsd/fuse_lowlevel.c:195:9: warning: Value stored to 'error' is never read
error = -ERANGE;
^ ~~~~~~~
Fixes: 3db2876
Reported-by: Clang Static Analyzer
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Missing a NULL check if the argument fetch fails.
Fixes: Coverity CID 1413119
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Remove fuse_req_getgroups that's unused in virtiofsd; it came in
from libfuse but we don't actually use it. It was called from
fuse_getgroups which we previously removed (but had left it's header
in).
Coverity had complained about null termination in it, but removing
it is the easiest answer.
Fixes: Coverity CID: 1413117 (String not null terminated)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Add an option to control the size of the thread pool. Requests are now
processed in parallel by default.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When running with multiple threads it can be tricky to handle
FUSE_INIT/FUSE_DESTROY in parallel with other request types or in
parallel with themselves. Serialize FUSE_INIT and FUSE_DESTROY so that
malicious clients cannot trigger race conditions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
vu_socket_path is NULL when --fd=FDNUM was used. Use
fuse_lowlevel_is_virtio() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
lookup is a RO operations, PARALLEL_DIROPS can be enabled.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
virtiofsd can run multiply even if the vhost_user_socket is same path.
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[1] 244965
virtio_session_mount: Waiting for vhost-user socket connection...
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[2] 244966
virtio_session_mount: Waiting for vhost-user socket connection...
]#
The user will get confused about the situation and maybe the cause of the
unexpected problem. So it's better to prevent the multiple running.
Create a regular file under localstatedir directory to exclude the
vhost_user_socket. To create and lock the file, use qemu_write_pidfile()
because the API has some sanity checks and file lock.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Applied fixes from Stefan's review and moved osdep include
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This cleans up unfreed resources in se on quiting, including
se->virtio_dev, se->vu_socket_path, se->vu_socketfd.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Handle a
mount
hard reboot (without unmount)
mount
we get another 'init' which FUSE doesn't normally expect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Allow init->destroy->init for mount->umount->mount
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Introduce "-o log_level=" command line option to specify current log
level (priority), valid values are "debug info warn err", e.g.
./virtiofsd -o log_level=debug ...
So only log priority higher than "debug" will be printed to
stderr/syslog. And the default level is info.
The "-o debug"/"-d" options are kept, and imply debug log level.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
dgilbert: Reworked for libfuse's log_func
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with fix by:
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Some FUSE message replies contain padding fields that are not
initialized by libfuse. This is fine in traditional FUSE applications
because the kernel is trusted. virtiofsd does not trust the guest and
must not expose uninitialized memory.
Use C struct initializers to automatically zero out memory. Not all of
these code changes are strictly necessary but they will prevent future
information leaks if the structs are extended.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Caller can set FUSE_WRITE_KILL_PRIV in write_flags. Parse it and pass it
to the filesystem.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Each FUSE operation involves parsing the input buffer. Currently the
code assumes the input buffer is large enough for the expected
arguments. This patch uses fuse_mbuf_iter to check the size.
Most operations are simple to convert. Some are more complicated due to
variable-length inputs or different sizes depending on the protocol
version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
There is a small change in behavior: if fuse_write_in->size doesn't
match the input buffer size then the request is failed. Previously
write requests with 1 fuse_buf element would truncate to
fuse_write_in->size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Let fuse_session_process_buf_int take a fuse_bufvec * instead of a
fuse_buf; and then through to do_write_buf - where in the best
case it can pass that straight through to op.write_buf without copying
(other than skipping a header).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Although --socket-path=PATH is useful for manual invocations, management
tools typically create the UNIX domain socket themselves and pass it to
the vhost-user device backend. This way QEMU can be launched
immediately with a valid socket. No waiting for the vhost-user device
backend is required when fd passing is used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Readv the data straight into the guests buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With fix by:
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Route fuse out messages back through the same queue elements
that had the command that triggered the request.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Listen on our unix socket for the connection from QEMU, when we get it
initialise vhost-user and dive into our own loop variant (currently
dummy).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When run with vhost-user options we conect to the QEMU instead
via a socket. Start this off by creating the socket.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add options to specify parameters for virtio-fs paths, i.e.
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
If caller has not sent file handle in request, then using inode, retrieve
the fd opened using O_PATH and use that to open file again and issue
fsync. This will be needed when dax_flush() calls fsync. At that time
we only have inode information (and not file).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
virtiofsd only supports major=7, minor>=31; trim out a lot of
old compatibility code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
All of the fuse files include config.h and define GNU_SOURCE
where we don't have either under our build - remove them.
Fixup path to the kernel's fuse.h in the QEMUs world.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
