aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2018-06-20tests/tcg: move ARM specific tests into subdirAlex Bennée
These only need to be built for ARM guests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20tests/tcg/i386/test-i386: fix printf formatAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/i386/test-i386: use modern vector_size attributesAlex Bennée
The compiler complains about the old __mode__ style attributes. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/x86_64: add Makefile.targetAlex Bennée
The sources for x86_64 are shared in the i386 directory which will be included thanks to TARGET_BASE_ARCH. However not all sources build so we need to filter out the ones we can't build in the 64 bit world and those that can't be built for 32 bit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/i386: add runner for test-i386-fpremAlex Bennée
The runner needs to compare against a reference run. We also only run this test when SPEED=slow as it takes a while. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg/i386: fix test-i386Alex Bennée
We don't include anything from qemu itself for the build. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20tests/tcg/i386: Build fix for hello-i386Fam Zheng
We have -Werror=missing-prototype, add a dummy prototype to avoid that warning. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20tests/tcg: enable building for i386Alex Bennée
While you can construct a compile command that does work using the x86_64 host compiler that most people use this is flakey. Different distros handle this is different ways so we default to using a known good i386 compiler via docker. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20tests/tcg: move i386 specific tests into subdirAlex Bennée
These only need to be built for i386 guests. This includes a stub tests/tcg/i386/Makfile.target which absorbs some of what was in tests/tcg/Makefile. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20tests/tcg/multiarch: move most output to stdoutAlex Bennée
The default test run outputs to stdout so it can be re-directed. Errors are still reported to stderr. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-06-20tests/tcg/multiarch: don't hard code paths/ports for linux-testAlex Bennée
The fixed path and ports get in the way of running our tests and builds in parallel. Instead of using TESTPATH we use mkdtemp() and instead of a fixed port we allow the kernel to assign one and query it afterwards. Ideally test directory creation should be common functionally across all TCG tests but this could complicate an already huge patch series so we mark it as a TODO for next time. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-20tests/tcg/multiarch: enable additional linux-test testsAlex Bennée
Un-comment the remaining tests. I removed the itimer value tests because I'm fairly sure a re-arming timer will always have a different value in it when you grab it. I've also fixed up the clone thread flags as QEMU will only allow a clone to use flags which match glibc. However the test is still racey so it remains disabled by default - it can be run by passing any additional parameters on the command line. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20tests/tcg/multiarch: Build fix for linux-testFam Zheng
To keep the compiler happy, and to fit in our buildsys flags: - Make local functions "static" - #ifdef out unused functions - drop cutils/osdep dependencies Signed-off-by: Fam Zheng <famz@redhat.com> [AJB: drop cutils/osdep dependencies] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20tests/tcg: move architecture independent tests into subdirAlex Bennée
We will want to build these for all supported guest architectures so lets move them all into one place. We also drop test_path at this point because it needs qemu utils and glib bits which is hard to support for cross compiling. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-20docker: Makefile.include introduce DOCKER_SCRIPTAlex Bennée
Define this in one place to make it easy to re-use. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20docker: allow "cc" command to run in user contextAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20docker: extend "cc" command to accept compilerAlex Bennée
When calling our cross-compilation images we want to call something other than the default cc. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Fam Zheng <famz@redhat.com>
2018-06-20docker: Add "cc" subcommandAlex Bennée
Signed-off-by: Fam Zheng <famz@redhat.com> [AJB: add if args.paths check] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-20docker: docker.py wrap StringIO import for python3Alex Bennée
Although the docker.py is nominally python2 we actually invoke it with the configured python from the configure script. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-06-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - Active mirror (blockdev-mirror copy-mode=write-blocking) - bdrv_drain_*() fixes and test cases - Fix crash with scsi-hd and drive_del # gpg: Signature made Mon 18 Jun 2018 17:44:10 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (35 commits) iotests: Add test for active mirroring block/mirror: Add copy mode QAPI interface block/mirror: Add active mirroring job: Add job_progress_increase_remaining() block/mirror: Add MirrorBDSOpaque block/dirty-bitmap: Add bdrv_dirty_iter_next_area test-hbitmap: Add non-advancing iter_next tests hbitmap: Add @advance param to hbitmap_iter_next() block: Generalize should_update_child() rule block/mirror: Use source as a BdrvChild block/mirror: Wait for in-flight op conflicts block/mirror: Use CoQueue to wait on in-flight ops block/mirror: Convert to coroutines block/mirror: Pull out mirror_perform() block: fix QEMU crash with scsi-hd and drive_del test-bdrv-drain: Test graph changes in drain_all section block: Allow graph changes in bdrv_drain_all_begin/end sections block: ignore_bds_parents parameter for drain functions block: Move bdrv_drain_all_begin() out of coroutine context block: Allow AIO_WAIT_WHILE with NULL ctx ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-18iotests: Add test for active mirroringMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20180613181823.13618-15-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-18test-hbitmap: Add non-advancing iter_next testsMax Reitz
Add a function that wraps hbitmap_iter_next() and always calls it in non-advancing mode first, and in advancing mode next. The result should always be the same. By using this function everywhere we called hbitmap_iter_next() before, we should get good test coverage for non-advancing hbitmap_iter_next(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180613181823.13618-9-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-18hbitmap: Add @advance param to hbitmap_iter_next()Max Reitz
This new parameter allows the caller to just query the next dirty position without moving the iterator. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180613181823.13618-8-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-18test-bdrv-drain: Test graph changes in drain_all sectionKevin Wolf
This tests both adding and remove a node between bdrv_drain_all_begin() and bdrv_drain_all_end(), and enabled the existing detach test for drain_all. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18test-bdrv-drain: Test that bdrv_drain_invoke() doesn't pollKevin Wolf
This adds a test case that goes wrong if bdrv_drain_invoke() calls aio_poll(). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18test-bdrv-drain: Graph change through parent callbackKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18test-bdrv-drain: Test node deletion in subtree recursionKevin Wolf
If bdrv_do_drained_begin() polls during its subtree recursion, the graph can change and mess up the bs->children iteration. Test that this doesn't happen. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18test-bdrv-drain: Add test for node deletionMax Reitz
This patch adds two bdrv-drain tests for what happens if some BDS goes away during the drainage. The basic idea is that you have a parent BDS with some child nodes. Then, you drain one of the children. Because of that, the party who actually owns the parent decides to (A) delete it, or (B) detach all its children from it -- both while the child is still being drained. A real-world case where this can happen is the mirror block job, which may exit if you drain one of its children. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18block: Really pause block jobs on drainKevin Wolf
We already requested that block jobs be paused in .bdrv_drained_begin, but no guarantee was made that the job was actually inactive at the point where bdrv_drained_begin() returned. This introduces a new callback BdrvChildRole.bdrv_drained_poll() and uses it to make bdrv_drain_poll() consider block jobs using the node to be drained. For the test case to work as expected, we have to switch from block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even considered active and must be waited for when draining the node. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18tests/test-bdrv-drain: bdrv_drain_all() works in coroutines nowKevin Wolf
Since we use bdrv_do_drained_begin/end() for bdrv_drain_all_begin/end(), coroutine context is automatically left with a BH, preventing the deadlocks that made bdrv_drain_all*() unsafe in coroutine context. Now that we even removed the old polling code as dead code, it's obvious that it's compatible now. Enable the coroutine test cases for bdrv_drain_all(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-18block: Use bdrv_do_drain_begin/end in bdrv_drain_all()Kevin Wolf
bdrv_do_drain_begin/end() implement already everything that bdrv_drain_all_begin/end() need and currently still do manually: Disable external events, call parent drain callbacks, call block driver callbacks. It also does two more things: The first is incrementing bs->quiesce_counter. bdrv_drain_all() already stood out in the test case by behaving different from the other drain variants. Adding this is not only safe, but in fact a bug fix. The second is calling bdrv_drain_recurse(). We already do that later in the same function in a loop, so basically doing an early first iteration doesn't hurt. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-18test-bdrv-drain: bdrv_drain() works with cross-AioContext eventsKevin Wolf
As long as nobody keeps the other I/O thread from working, there is no reason why bdrv_drain() wouldn't work with cross-AioContext events. The key is that the root request we're waiting for is in the AioContext we're polling (which it always is for bdrv_drain()) so that aio_poll() is woken up in the end. Add a test case that shows that it works. Remove the comment in bdrv_drain() that claims otherwise. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15Acceptance tests: add Linux kernel boot and console checking testCleber Rosa
This test boots a Linux kernel, and checks that the given command line was effective in two ways: * It makes the kernel use the set "console device" as a console * The kernel records the command line as expected in the console Given that way too many error conditions may occur, and detecting the kernel boot progress status may not be trivial, this test relies on a timeout to handle unexpected situations. Also, it's *not* tagged as a quick test for obvious reasons. It may be useful, while interactively running/debugging this test, or tests similar to this one, to show some of the logging channels. Example: $ avocado --show=QMP,console run boot_linux_console.py Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20180530184156.15634-6-crosa@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-15Acceptance tests: add quick VNC testsCleber Rosa
This patch adds a few simple behavior tests for VNC. Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180530184156.15634-4-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-15Add functional/acceptance tests infrastructureCleber Rosa
This patch adds the very minimum infrastructure necessary for writing and running functional/acceptance tests, including: * Documentation * The avocado_qemu.Test base test class * One example tests (version.py) Additional functionality is expected to be added along the tests that require them. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20180530184156.15634-2-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [ehabkost: fix typo on testing.rst] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-15block: Remove deprecated -drive option serialKevin Wolf
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15block: Remove deprecated -drive geometry optionsKevin Wolf
The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15block: Fix -blockdev / blockdev-add for empty objects and arraysMarkus Armbruster
-blockdev and blockdev-add silently ignore empty objects and arrays in their argument. That's because qmp_blockdev_add() converts the argument to a flat QDict, and qdict_flatten() eats empty QDict and QList members. For instance, we ignore an empty BlockdevOptions member @cache. No real harm, as absent means the same as empty there. Thus, the flaw puts an artificial restriction on the QAPI schema: we can't have potentially empty objects and arrays within BlockdevOptions, except when they're optional and "empty" has the same meaning as "absent". Our QAPI schema satisfies this restriction (I checked), but it's a trap for the unwary, and a temptation to employ awkward workarounds for the wary. Let's get rid of it. Change qdict_flatten() and qdict_crumple() to treat empty dictionaries and lists exactly like scalars. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15check-block-qdict: Cover flattening of empty lists and dictionariesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15check-block-qdict: Rename qdict_flatten()'s variables for clarityMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15qobject: Move block-specific qdict code to block-qdict.cMarkus Armbruster
Pure code motion, except for two brace placements and a comment tweaked to appease checkpatch. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15block: Add block-specific QDict headerMax Reitz
There are numerous QDict functions that have been introduced for and are used only by the block layer. Move their declarations into an own header file to reflect that. While qdict_extract_subqdict() is in fact used outside of the block layer (in util/qemu-config.c), it is still a function related very closely to how the block layer works with nested QDicts, namely by sometimes flattening them. Therefore, its declaration is put into this header as well and util/qemu-config.c includes it with a comment stating exactly which function it needs. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20180509165530.29561-7-mreitz@redhat.com> [Copyright note tweaked, superfluous includes dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15iotests: Add test 221 to catch qemu-img map regressionEric Blake
Although qemu-img creates aligned files (by rounding up), it must also gracefully handle files that are not sector-aligned. Test that the bug fixed in the previous patch does not recur. It's a bit annoying that we can see the (implicit) hole past the end of the file on to the next sector boundary, so if we ever reach the point where we report a byte-accurate size rather than our current behavior of always rounding up, this test will probably need a slight modification. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging Fixes in syscall numbers, disable the build of binaries not needed for linux-user, update of qemu-binfmt-conf.sh and cleanup around is_error() # gpg: Signature made Tue 12 Jun 2018 11:57:18 BST # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-3.0-pull-request: linux-user/sparc64: Add inotify_rm_watch and tee syscalls linux-user/microblaze: Fix typo in accept4 syscall linux-user/hppa: Fix typo in mknodat syscall linux-user/alpha: Fix epoll syscalls qemu-binfmt-conf.sh: ignore the OS/ABI field linux-user: disable qemu-bridge-helper and socket_scm_helper build linux-user: Use is_error() to avoid warnings and make the code clearer linux-user: Export use is_error(), use it to avoid warnings Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12Merge remote-tracking branch 'remotes/kraxel/tags/usb-20180612-pull-request' ↵Peter Maydell
into staging usb: bug fix collection, doc update. # gpg: Signature made Tue 12 Jun 2018 11:44:17 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20180612-pull-request: usb-mtp: Return error on suspicious TYPE_DATA packet from initiator usb-hcd-xhci-test: add a test for ccid hotplug usb-ccid: fix bus leak object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalence bus: do not unref the added child bus on realize usb/dev-mtp: Fix use of uninitialized values usb: correctly handle Zero Length Packets usb: update docs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc: fixes A couple of fixes to acpi and nvdimm. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 11 Jun 2018 20:21:03 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: nvdimm: make persistence option symbolic hw/i386: Update SSDT table used by "make check" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/python-next-pull-request' into staging Python queue, 2018-06-11 * Make code compatible with Python 3 using 'futurize --stage1' * Require Python >= 2.7 and remove Python 2.6 compatibility modules # gpg: Signature made Mon 11 Jun 2018 18:41:26 BST # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/python-next-pull-request: python: Remove scripts/ordereddict.py python: Remove scripts/argparse.py configure: Require Python 2.7 or newer python: futurize -f lib2to3.fixes.fix_numliterals python: futurize -f lib2to3.fixes.fix_except python: futurize -f lib2to3.fixes.fix_renames python: futurize -f lib2to3.fixes.fix_tuple_params python: futurize -f lib2to3.fixes.fix_reduce python: futurize -f lib2to3.fixes.fix_standarderror python: futurize -f lib2to3.fixes.fix_has_key python: futurize -f libfuturize.fixes.fix_next_call python: futurize -f libfuturize.fixes.fix_absolute_import python: futurize -f libfuturize.fixes.fix_print_with_import Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12usb-hcd-xhci-test: add a test for ccid hotplugMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180531195119.22021-5-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-11nvdimm: make persistence option symbolicRoss Zwisler
Replace the "nvdimm-cap" option which took numeric arguments such as "2" with a more user friendly "nvdimm-persistence" option which takes symbolic arguments "cpu" or "mem-ctrl". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-11hw/i386: Update SSDT table used by "make check"Ross Zwisler
This commit: commit aa78a16d8645 ("hw/i386: Rename 2.13 machine types to 3.0") updated the name used to create the q35 machine, which in turn changed the SSDT table which is generated when we run "make check": acpi-test: Warning! SSDT mismatch. Actual [asl:/tmp/asl-QZDWJZ.dsl, aml:/tmp/aml-T8JYJZ], Expected [asl:/tmp/asl-DTWVJZ.dsl, aml:tests/acpi-test-data/q35/SSDT.dimmpxm]. Here's the only difference, aside from the checksum: < Name (MEMA, 0x07FFF000) --- > Name (MEMA, 0x07FFE000) Update the binary table that we compare against so it reflects this name change. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Fixes: commit aa78a16d8645 ("hw/i386: Rename 2.13 machine types to 3.0") Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-15 10:05:55 +0000