aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2022-07-20Merge tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu into ↵Peter Maydell
staging Migration pull 2022-07-20 This replaces yesterdays pull and: a) Fixes some test build errors without TLS b) Reenabled the zlib acceleration on s390 now that we have Ilya's fix Hyman's dirty page rate limit set Ilya's fix for zlib vs migration Peter's postcopy-preempt Cleanup from Dan zero-copy tidy ups from Leo multifd doc fix from Juan Revert disable of zlib acceleration on s390x Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Wed 20 Jul 2022 12:18:56 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu: (30 commits) Revert "gitlab: disable accelerated zlib for s390x" migration: Avoid false-positive on non-supported scenarios for zero-copy-send multifd: Document the locking of MultiFD{Send/Recv}Params migration/multifd: Report to user when zerocopy not working Add dirty-sync-missed-zero-copy migration stat QIOChannelSocket: Fix zero-copy flush returning code 1 when nothing sent migration: remove unreachable code after reading data tests: Add postcopy preempt tests tests: Add postcopy tls recovery migration test tests: Add postcopy tls migration test tests: Move MigrateCommon upper migration: Respect postcopy request order in preemption mode migration: Enable TLS for preempt channel migration: Export tls-[creds|hostname|authz] params to cmdline too migration: Add helpers to detect TLS capability migration: Add property x-postcopy-preempt-break-huge migration: Create the postcopy preempt channel asynchronously migration: Postcopy recover with preempt enabled migration: Postcopy preemption enablement migration: Postcopy preemption preparation on channel creation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-20Merge tag 'pull-request-2022-07-20' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * Fixes for s390x floating point vector instructions # gpg: Signature made Wed 20 Jul 2022 08:14:50 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2022-07-20' of https://gitlab.com/thuth/qemu: tests/tcg/s390x: test signed vfmin/vfmax target/s390x: fix NaN propagation rules target/s390x: fix handling of zeroes in vfmin/vfmax Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # fpu/softfloat-specialize.c.inc
2022-07-20tests: Add postcopy preempt testsPeter Xu
Four tests are added for preempt mode: - Postcopy plain - Postcopy recovery - Postcopy tls - Postcopy tls+recovery Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220707185530.27801-1-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Manual merge
2022-07-20tests: Add postcopy tls recovery migration testPeter Xu
It's easy to build this upon the postcopy tls test. Rename the old postcopy recovery test to postcopy/recovery/plain. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220707185527.27747-1-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Manual merge
2022-07-20tests: Add postcopy tls migration testPeter Xu
We just added TLS tests for precopy but not postcopy. Add the corresponding test for vanilla postcopy. Rename the vanilla postcopy to "postcopy/plain" because all postcopy tests will only use unix sockets as channel. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220707185525.27692-1-peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Manual merge
2022-07-20tests: Move MigrateCommon upperPeter Xu
So that it can be used in postcopy tests too soon. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220707185522.27638-1-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20tests: Add dirty page rate limit testHyman Huang(黄勇)
Add dirty page rate limit test if kernel support dirty ring, The following qmp commands are covered by this test case: "calc-dirty-rate", "query-dirty-rate", "set-vcpu-dirty-limit", "cancel-vcpu-dirty-limit" and "query-vcpu-dirty-limit". Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Acked-by: Peter Xu <peterx@redhat.com> Message-Id: <eed5b847a6ef0a9c02a36383dbdd7db367dd1e7e.1656177590.git.huangy81@chinatelecom.cn> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20softmmu/dirtylimit: Implement dirty page rate limitHyman Huang(黄勇)
Implement dirtyrate calculation periodically basing on dirty-ring and throttle virtual CPU until it reachs the quota dirty page rate given by user. Introduce qmp commands "set-vcpu-dirty-limit", "cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit" to enable, disable, query dirty page limit for virtual CPU. Meanwhile, introduce corresponding hmp commands "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit", "info vcpu_dirty_limit" so the feature can be more usable. "query-vcpu-dirty-limit" success depends on enabling dirty page rate limit, so just add it to the list of skipped command to ensure qmp-cmd-test run successfully. Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20Merge tag 'pull-hex-20220719-1' of https://github.com/quic/qemu into stagingPeter Maydell
Recall that the semantics of a Hexagon mem_noshuf packet are that the store effectively happens before the load. There are two bug fixes in this series. # gpg: Signature made Tue 19 Jul 2022 22:25:19 BST # gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422 # gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422 * tag 'pull-hex-20220719-1' of https://github.com/quic/qemu: Hexagon (target/hexagon) fix bug in mem_noshuf load exception Hexagon (target/hexagon) fix store w/mem_noshuf & predicated load Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-19Hexagon (target/hexagon) fix bug in mem_noshuf load exceptionTaylor Simpson
The semantics of a mem_noshuf packet are that the store effectively happens before the load. However, in cases where the load raises an exception, we cannot simply execute the store first. This change adds a probe to check that the load will not raise an exception before executing the store. If the load is predicated, this requires special handling. We check the condition before performing the probe. Since, we need the EA to perform the check, we move the GET_EA portion inside CHECK_NOSHUF_PRED. Test case added in tests/tcg/hexagon/mem_noshuf_exception.c Suggested-by: Alessandro Di Federico <ale@rev.ng> Suggested-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220707210546.15985-3-tsimpson@quicinc.com>
2022-07-19Hexagon (target/hexagon) fix store w/mem_noshuf & predicated loadTaylor Simpson
Call the CHECK_NOSHUF macro multiple times: once in the fGEN_TCG_PRED_LOAD() and again in fLOAD(). Before this commit, a packet with a store and a predicated load with mem_noshuf that gets encoded like this: { P0 = cmp.eq(R17,#0x0) memw(R18+#0x0) = R2 if (!P0.new) R3 = memw(R17+#0x4) } ... would end up generating a branch over both the load and the store like so: ... brcond_i32 loc17,$0x0,eq,$L1 mov_i32 loc18,store_addr_1 qemu_st_i32 store_val32_1,store_addr_1,leul,0 qemu_ld_i32 loc16,loc7,leul,0 set_label $L1 ... Test cases added to tests/tcg/hexagon/mem_noshuf.c Co-authored-by: Taylor Simpson <tsimpson@quicinc.com> Signed-off-by: Brian Cain <bcain@quicinc.com> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220707210546.15985-2-tsimpson@quicinc.com>
2022-07-19tests/tcg/loongarch64: Add pcadd related instructions testSong Gao
This includes: - PCADDI - PCADDU12I - PCADDU18I - PCALAU12I Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-9-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/tcg/loongarch64: Add fp comparison instructions testSong Gao
Choose some instructions to test: - FCMP.cond.S - cond: ceq clt cle cne seq slt sle sne Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-8-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/tcg/loongarch64: Add fclass testSong Gao
This includes: - FCLASS.{S/D} Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-7-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/tcg/loongarch64: Add div and mod related instructions testSong Gao
This includes: - DIV.{W[U]/D[U]} - MOD.{W[U]/D[U]} Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-6-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/tcg/loongarch64: Add clo related instructions testSong Gao
This includes: - CL{O/Z}.{W/D} - CT{O/Z}.{W/D} Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-5-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/tcg/loongarch64: Add float reference filesPhilippe Mathieu-Daudé
Generated on Loongson-3A5000 (CPU revision 0x0014c011). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220104132022.2146857-1-f4bug@amsat.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20220716085426.3098060-2-gaosong@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-07-19tests/docker/dockerfiles: Add debian-loongarch-cross.dockerRichard Henderson
Use the pre-packaged toolchain provided by Loongson via github. Tested-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220704070824.965429-1-richard.henderson@linaro.org>
2022-07-19tests/tcg/s390x: test signed vfmin/vfmaxIlya Leoshkevich
Add a test to prevent regressions. Try all floating point value sizes and all combinations of floating point value classes. Verify the results against PoP tables, which are represented as close to the original as possible - this produces a lot of checkpatch complaints, but it seems to be justified in this case. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220713182612.3780050-4-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/unit: Replace g_memdup() by g_memdup2()Philippe Mathieu-Daudé
Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538 The old API took the size of the memory to duplicate as a guint, whereas most memory functions take memory sizes as a gsize. This made it easy to accidentally pass a gsize to g_memdup(). For large values, that would lead to a silent truncation of the size from 64 to 32 bits, and result in a heap area being returned which is significantly smaller than what the caller expects. This can likely be exploited in various modules to cause a heap buffer overflow. Replace g_memdup() by the safer g_memdup2() wrapper. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210903174510.751630-24-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18qtest/machine-none: Add LoongArch supportSong Gao
Update the cpu_maps[] to support the LoongArch target. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220713020258.601424-1-gaosong@loongson.cn> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: Remove docker cross-compile test from CentOS VMJohn Snow
The fedora container has since been split apart, so there's no suitable nearby target that would support "test-mingw" as it requires both x32 and x64 support -- so either fedora-cross-win32 nor fedora-cross-win64 would be truly suitable. Just remove this test as superfluous with our current CI infrastructure. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-10-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: add 1GB extra memory per coreJohn Snow
If you try to run a 16 or 32 threaded test, you're going to run out of memory very quickly with qom-test and a few others. Bump the memory limit to try to scale with larger-core machines. Granted, this means that a 16 core processor is going to ask for 16GB, but you *probably* meet that requirement if you have such a machine. 512MB per core didn't seem to be enough to avoid ENOMEM and SIGABRTs in the test cases in practice on a six core machine; so I bumped it up to 1GB which seemed to help. Add this magic in early to the configuration process so that the config file, if provided, can still override it. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-9-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: remove duplicate 'centos' VM testJohn Snow
This is listed twice by accident; we require genisoimage to run the test, so remove the unconditional entry. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-8-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: remove ubuntu.i386 VM testJohn Snow
Ubuntu 18.04 is out of our support window, and Ubuntu 20.04 does not support i386 anymore. The debian project does, but they do not provide any cloud images for it, a new expect-style script would have to be written. Since we have i386 cross-compiler tests hosted on GitLab CI, we don't need to support this VM test anymore. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-7-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: upgrade Ubuntu 18.04 VM to 20.04John Snow
18.04 has fallen out of our support window, so move ubuntu.aarch64 forward to ubuntu 20.04, which is now our oldest supported Ubuntu release. Notes: This checksum changes periodically; use a fixed point image with a known checksum so that the image isn't re-downloaded on every single invocation. (The checksum for the 18.04 image was already incorrect at the time of writing.) Just like the centos.aarch64 test, this test currently seems very flaky when run as a TCG test. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-6-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: switch centos.aarch64 to CentOS 8 StreamJohn Snow
Switch this test over to using a cloud image like the base CentOS8 VM test, which helps make this script a bit simpler too. Note: At time of writing, this test seems pretty flaky when run without KVM support for aarch64. Certain unit tests like migration-test, virtio-net-failover, test-hmp and qom-test seem quite prone to fail under TCG. Still, this is an improvement in that at least pure build tests are functional. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-5-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: switch CentOS 8 to CentOS 8 StreamJohn Snow
The old CentOS image didn't work anymore because it was already EOL at the beginning of 2022. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-4-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18tests/vm: use 'cp' instead of 'ln' for temporary vm imagesJohn Snow
If the initial setup fails, you've permanently altered the state of the downloaded image in an unknowable way. Use 'cp' like our other test setup scripts do. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220708153503.18864-3-jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-18Align Raspberry Pi DMA interrupts with Linux DTSAndrey Makarov
There is nothing in the specs on DMA engine interrupt lines: it should have been in the "BCM2835 ARM Peripherals" datasheet but the appropriate "ARM peripherals interrupt table" (p.113) is nearly empty. All Raspberry Pi models 1-3 (based on bcm2835) have Linux device tree (arch/arm/boot/dts/bcm2835-common.dtsi +25): /* dma channel 11-14 share one irq */ This information is repeated in the driver code (drivers/dma/bcm2835-dma.c +1344): /* * in case of channel >= 11 * use the 11th interrupt and that is shared */ In this patch channels 0--10 and 11--14 are handled separately. Signed-off-by: Andrey Makarov <andrey.makarov@auriga.com> Message-id: 20220716113210.349153-1-andrey.makarov@auriga.com [PMM: fixed checkpatch nits] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-18hw/adc: Fix CONV bit in NPCM7XX ADC CON registerHao Wu
The correct bit for the CONV bit in NPCM7XX ADC is bit 13. This patch fixes that in the module, and also lower the IRQ when the guest is done handling an interrupt event from the ADC module. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture<venture@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220714182836.89602-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-15Merge tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * New ISL69259 device model * New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC) * Aspeed GPIO fixes * Extension of m25p80 with write protect bits * More avocado tests using the Aspeed SDK # gpg: Signature made Thu 14 Jul 2022 15:28:09 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu: aspeed: Add fby35-bmc slot GPIO's hw/gpio/aspeed: Don't let guests modify input pins qtest/aspeed_gpio: Add input pin modification test hw: m25p80: add tests for BP and TB bit write protect hw: m25p80: Add Block Protect and Top Bottom bits for write protect test/avocado/machine_aspeed.py: Add SDK tests docs: aspeed: Minor updates docs: aspeed: Add fby35 multi-SoC machine section aspeed: Add AST1030 (BIC) to fby35 aspeed: fby35: Add a bootrom for the BMC aspeed: Add AST2600 (BMC) to fby35 aspeed: Add fby35 skeleton aspeed: Make aspeed_board_init_flashes public aspeed: Refactor UART init for multi-SoC machines aspeed: Create SRAM name from first CPU index hw/sensor: Add Renesas ISL69259 device model hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators hw/i2c/pmbus: Add idle state to return 0xff's aspeed: sbc: Allow per-machine settings Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-14Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* SCSI fuzzing fix (Mauro) * pre-install data files in the build directory (Akihiko) * SCSI fixes for Mac OS (Mark) # gpg: Signature made Wed 13 Jul 2022 15:59:00 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: pc-bios/s390-ccw: add -Wno-array-bounds q800: add default vendor and product information for scsi-cd devices q800: add default vendor and product information for scsi-hd devices scsi-disk: allow MODE SELECT block descriptor to set the block size scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh scsi-disk: add FORMAT UNIT command q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh scsi-disk: add new quirks bitmap to SCSIDiskState meson: Prefix each element of firmware path module: Use bundle mechanism datadir: Use bundle mechanism cutils: Introduce bundle mechanism scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-14hw/gpio/aspeed: Don't let guests modify input pinsPeter Delevoryas
Up until now, guests could modify input pins by overwriting the data value register. The guest OS should only be allowed to modify output pin values, and the QOM property setter should only be permitted to modify input pins. This change also updates the gpio input pin test to match this expectation. Andrew suggested this particularly refactoring here: https://lore.kernel.org/qemu-devel/23523aa1-ba81-412b-92cc-8174faba3612@www.fastmail.com/ Suggested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Peter Delevoryas <peter@pjd.dev> Fixes: 4b7f956862dc ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220712023219.41065-3-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14qtest/aspeed_gpio: Add input pin modification testPeter Delevoryas
Verify the current behavior, which is that input pins can be modified by guest OS register writes. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220712023219.41065-2-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14hw: m25p80: add tests for BP and TB bit write protectIris Chen
Signed-off-by: Iris Chen <irischenlj@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627185234.1911337-3-irischenlj@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14test/avocado/machine_aspeed.py: Add SDK testsCédric Le Goater
The Aspeed SDK kernel usually includes support for the lastest HW features. This is interesting to exercise QEMU and discover the gaps in the models. Add extra I2C tests for the AST2600 EVB machine to check the new register interface. Message-Id: <20220707091239.1029561-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14Merge tag 'darwin-20220712' of https://github.com/philmd/qemu into stagingPeter Maydell
Darwin patches: - Enable RDTSCP support on HVF - ui/cocoa: Take refresh rate into account Few buildsys fixes: - Restrict TCG to emulation - Remove a unused-but-set-variable warning - Allow running Avocado from pseudo-"in source tree" builds # gpg: Signature made Tue 12 Jul 2022 23:14:37 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'darwin-20220712' of https://github.com/philmd/qemu: avocado: Fix BUILD_DIR if it's equal to SOURCE_DIR ui/cocoa: Take refresh rate into account ui/cocoa: Fix switched_to_fullscreen warning configure: Restrict TCG to emulation hvf: Enable RDTSCP support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-13datadir: Use bundle mechanismAkihiko Odaki
softmmu/datadir.c had its own implementation to find files in the build tree, but now bundle mechanism provides the unified implementation which works for datadir and the other files. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)Mauro Matteo Cascella
Set current_req to NULL, not current_req->req, to prevent reusing a free'd buffer in case of repeated SCSI cancel requests. Also apply the fix to CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel the request. Thanks to Alexander Bulekov for providing a reproducer. Fixes: CVE-2022-0216 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972 Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20220711123316.421279-1-mcascell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13avocado: Fix BUILD_DIR if it's equal to SOURCE_DIRPeter Delevoryas
I like to build QEMU from the root source directory [*], rather than cd'ing into the build directory. This code may as well include a search path for that, so that you can run avocado tests individually without specifying "-p qemu_bin=build/qemu-system-arm" manually. [*] See commit dedad02720 ("configure: add support for pseudo-"in source tree" builds") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220702185604.46643-1-peter@pjd.dev> [PMD: Mention commit dedad02720] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-07-12Merge tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu into stagingPeter Maydell
Block patches: - Refactoring for non-coroutine variants of bdrv/blk_co_* functions: Auto-generate more of them with the block coroutine wrapper generator script - iotest fixes - Both for the storage daemon and the system emulator: Fix PID file handling when daemonizing (store the absolute path and delete that on exit, which is necessary because daemonizing will change the working directory to /) # gpg: Signature made Tue 12 Jul 2022 19:04:14 BST # gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF # gpg: issuer "hreitz@redhat.com" # gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF * tag 'pull-block-2022-07-12' of https://gitlab.com/hreitz/qemu: (35 commits) vl: Unlink absolute PID file path vl: Conditionally register PID file unlink notifier qsd: Unlink absolute PID file path iotests/297: Have mypy ignore unused ignores qsd: Do not use error_report() before monitor_init block: Remove remaining unused symbols in coroutines.h block: Reorganize some declarations in block-backend-io.h block: Add blk_co_truncate() block: Add blk_co_ioctl() block: Implement blk_flush() using generated_co_wrapper block: Implement blk_pdiscard() using generated_co_wrapper block: Implement blk_pwrite_zeroes() using generated_co_wrapper block: Add blk_co_pwrite_compressed() block: Change blk_pwrite_compressed() param order block: Export blk_pwritev_part() in block-backend-io.h block: Add blk_[co_]preadv_part() block: Add blk_{preadv,pwritev}() block: Implement blk_{pread,pwrite}() using generated_co_wrapper block: Make blk_co_pwrite() take a const buffer block: Make 'bytes' param of blk_{pread,pwrite}() an int64_t ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-12Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* fuzzing fixes (Alexander) * fix cross compilation CFLAGS and compiler choice * do not specify -bios option for tests/vm * miscellaneous fixes * preparation for pre-install tree in the build directory (Akihiko) # gpg: Signature made Tue 12 Jul 2022 13:47:19 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: meson: place default firmware path under .../share qga: Relocate a path emitted in the help text build: Do not depend on pc-bios for config-host.mak accel: kvm: Fix memory leak in find_stats_descriptors audio/dbus: fix building fuzz: only use generic-fuzz targets on oss-fuzz build: improve -fsanitize-coverage-allowlist check build: try both native and cross compilers configure: pass whole target name to probe_target_compiler tests/tcg: compile system emulation tests as freestanding configure: write EXTRA_CFLAGS for all sub-Makefiles configure: allow more host/target combos to use the host compiler configure, pc-bios/vof: pass cross CFLAGS correctly configure, pc-bios/s390-ccw: pass cross CFLAGS correctly configure, pc-bios/optionrom: pass cross CFLAGS correctly pc-bios/optionrom: use -m16 unconditionally scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216) tests/vm: do not specify -bios option Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # pc-bios/s390-ccw/netboot.mak
2022-07-12iotests/297: Have mypy ignore unused ignoresHanna Reitz
e7874a50ff3f5b20fb46f36958ad ("python: update for mypy 0.950") has added `warn_unused_ignores = False` to python/setup.cfg, to be able to keep compatibility with both pre- and post-0.950 mypy versions. The iotests' mypy.ini needs the same, or 297 will fail (on both pre- and post-0.950 mypy, as far as I can tell; just for different `ignore` lines). Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220621092536.19837-1-hreitz@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
2022-07-12block: Add blk_co_truncate()Alberto Faria
Also convert blk_truncate() into a generated_co_wrapper. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-17-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Implement blk_pwrite_zeroes() using generated_co_wrapperAlberto Faria
Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-13-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add blk_co_pwrite_compressed()Alberto Faria
Also convert blk_pwrite_compressed() into a generated_co_wrapper. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-12-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Export blk_pwritev_part() in block-backend-io.hAlberto Faria
Also convert it into a generated_co_wrapper. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-10-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add blk_[co_]preadv_part()Alberto Faria
Implement blk_preadv_part() using generated_co_wrapper. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-9-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add blk_{preadv,pwritev}()Alberto Faria
Implement them using generated_co_wrapper. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-8-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-17 06:51:48 +0000