Age | Commit message (Collapse) | Author |
|
Add basic tests for file-based migration.
Note that we cannot use test_precopy_common because that routine
expects it to be possible to run the migration live. With the file
transport there is no live migration because we must wait for the
source to finish writing the migration data to the file before the
destination can start reading. Add a new migration function
specifically to handle the file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-7-farosas@suse.de>
|
|
Add a smoke test that migrates to a file and gives it to the
script. It should catch the most annoying errors such as changes in
the ram flags.
After code has been merged it becomes way harder to figure out what is
causing the script to fail, the person making the change is the most
likely to know right away what the problem is.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231009184326.15777-7-farosas@suse.de>
|
|
Python Pullreq
Python PR:
- Use socketpair for all machine.py connections
- Support Python 3.12
- Switch iotests over to using raise-on-error QMP command interface
(Thank you very much, Vladimir!)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAmUpldkACgkQfe+BBqr8
# OQ4NtRAAnkEmXsECAxQ2ewvf3yK8PTFm4Oq5nqMIw+KB94ATrsGzk3z1rLvatSl3
# 6VLsV2+FWoOEyKrsfu5DIfbuo4d3TZTU7N2DIZpVpvO166K+fXbzp8skAg+n3BMC
# tWkSOcnsT6+8aqyxxyASdHvbbE7pvPw8OA3oIIstsYeZ5/HHpOWXNj1kjCsnL0lW
# 7y5h6UUKGmnCPdixyk042+AvKkT7GAKVjFnjUF5JHv0iR2KpQ+O9H7OEalqQT5w5
# eab4oMGuIYhzYe+MNpyybAB3Xd2pxhcppk+sl4dCE8qmMn7KRoTNw1iu+qhsNQfQ
# JILZoCPtYMhpef4X0ulH8PFBMweBptqOjo4lpz9QIdMWTf86IE0yIT9DCy3aSjpp
# ywwxhFKJS43gz4WHkEJlrY9PHwLsULaV/Cz6HKJAU6h9aFtcNdT4pkCOERnZ8X4C
# yHlNReTG5Dz1sYzKJ/k9LTjAaVDasumR8/yadaUCwalj5zexQ27qlIM6oc5wdIRQ
# up1VHi7odF5KHb6GeqdniuuEF6NBCYRAV5nz+dbd6exfKOaxYRrr48yh9SUm8QS6
# JCvMMFFAZCIrI/nkRVajbLi9L5O3fg5abtlzSzh9o4iyf8Rf/1gtKNxZRK1NZIjQ
# cTYBJXpMulNx7bM2CPNsPWGqCTAjAcu10svqTA8luGj4fqdTNyU=
# =02Bd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Oct 2023 15:09:13 EDT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* tag 'python-pull-request' of https://gitlab.com/jsnow/qemu: (25 commits)
python: use vm.cmd() instead of vm.qmp() where appropriate
scripts: add python_qmp_updater.py
tests/vm/basevm.py: use cmd() instead of qmp()
iotests.py: pause_job(): drop return value
iotests: drop some extra ** in qmp() call
iotests: drop some extra semicolons
iotests: refactor some common qmp result checks into generic pattern
iotests: add some missed checks of qmp result
iotests: QemuStorageDaemon: add cmd() method like in QEMUMachine.
python/machine.py: upgrade vm.cmd() method
python/qemu: rename command() to cmd()
python: rename QEMUMonitorProtocol.cmd() to cmd_raw()
scripts/cpu-x86-uarch-abi.py: use .command() instead of .cmd()
qmp_shell.py: _fill_completion() use .command() instead of .cmd()
python/qemu/qmp/legacy: cmd(): drop cmd_id unused argument
Python: Enable python3.12 support
configure: fix error message to say Python 3.8
python/qmp: remove Server.wait_closed() call for Python 3.12
Python/iotests: Add type hint for nbd module
python/machine: remove unused sock_dir argument
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
pull-loongarch-20231013
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZSimNQAKCRBAov/yOSY+
# 33XwBADF9ZKlESDBDa/huNFAKD7BsUIdglHfz9lHnLY+kQbCun4HyTLtp2IBsySu
# mZTjdfU/LnaBidFLjEnmZZMPyiI3oV1ruSzT53egSDaxrFUXGpc9oxtMNLsyfk9P
# swdngG13Fc9sWVKC7IJeYDYXgkvHY7NxsiV8U9vdqXOyw2uoHA==
# =ufPc
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Oct 2023 22:06:45 EDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20231013' of https://gitlab.com/gaosong/qemu:
LoongArch: step down as general arch maintainer
hw/loongarch/virt: Remove unused 'loongarch_virt_pm' region
hw/loongarch/virt: Remove unused ISA Bus
hw/loongarch/virt: Remove unused ISA UART
hw/loongarch: remove global loaderparams variable
target/loongarch: Add preldx instruction
target/loongarch: fix ASXE flag conflict
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
hw/ufs: fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmUozswACgkQEuIgTA5d
# tgITExAAo0BSNir4I5MfeNIjZTNNdxLXDl0+92JyairB2m/gWH/02jGtrJBYp5On
# ELnixKj2Ntn9IIRr3NwQHNTnDOZHRkUBH+pRVeMbZ+IWLjEoWQdl03ge7e9sHai3
# CLXB4HPSnXddy1SmS9FEkdBWopqxKF4BLZnpAfwh/dj2fzSyDyNIMmGoRimRQhph
# 9A90304ERUdpREAXncTgSdXeDZz+lScadzUJZrPPiG2ZHXL+qzDCX7ojEnNaUFxz
# W1IfriI8oeeORfCQaNEOncLKhSwE1WscGxP0vILPApKOu251tObgSbK90QlQR2qT
# BMl7k4BDfYeksXMGc0BXVFrOfv1ud86NlCE2OokK6HBZVuHio4C6TU/t65MC4Rw5
# mJ8CPgbN+7sgVmAGo0sLYzI6GiRR27VqqLh6KXVAa5c/fAdt5pHSkakwSvxiXsAl
# EqskmOY2em5O//+7CWN1CtY+I2pHyltMXAi3Cb2vjweNx88kuhmxFQWeZVI10/H3
# gNrNfu32+ihDLMqR7uQamdAZV0lnIwp97nCbf3LzpM0btjl70QvGZhsbiCDiLQrG
# mJjnaix4xDb8T21WKrI8DKcwR4rvD8hZsCUp31XJnA8HWtdPnEQldK8NEGNlU5ye
# lrGc6gxiwZLCBBIj9lwbZW3Zv9Vz9jNWISOmY+KWLCIus98DBxQ=
# =XXsQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Oct 2023 00:59:56 EDT
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20231013' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: Fix incorrect register fields
hw/ufs: Fix code coverity issues
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
* Fix CVE-2023-1544
* Deprecate the rdma code
* Fix flaky npcm7xx_timer test
* i2c-echo license statement and Kconfig switch
* Disable the failing riscv64-debian-cross CI job by default
* tag 'pull-request-2023-10-12' of https://gitlab.com/thuth/qemu:
gitlab-ci: Disable the riscv64-debian-cross-container by default
MAINTAINERS: Add include/sysemu/qtest.h to the qtest section
hw/misc/Kconfig: add switch for i2c-echo
hw/misc/i2c-echo: add copyright/license note
tests/qtest: Fix npcm7xx_timer-test.c flaky test
hw/rdma: Deprecate the pvrdma device and the rdma subsystem
hw/pvrdma: Protect against buggy or malicious guest driver
Conflicts:
docs/about/deprecated.rst
Context conflict between RISC-V and RDMA deprecation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Block layer patches
- Clean up coroutine versions of bdrv_{is_allocated,block_status}*
- Graph locking part 5 (protect children/parent links)
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmUoHL8RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9b4uRAAjryVAaA5jXZ3mdGB80nhGtARZlIaIVO/
# tlXk065q2Cj+98f+fBPCPWvmEz28vJwBhJUsFwpHzLZrxecBpwZp0MPAkFBNkouq
# +AiO9xyTAqccEp/dnIys4Bun9Rp0Jq9lk9y29zzEmQuK5uCB56lpx2cDn/JkzSQt
# ZFtnxxTwi3MDTNvXATub8Ia/1suui0zvESS7J/NBxQNI3cFaQszp1vMwlRIoPiWo
# 15YZFPZZQ2pvu6/1nL1Vl9OLbPAVcEGJpjHZv0XhudYOwRiDvjYnwfPL7BuwYEsU
# Dos4mZZd/KMU695s7OzlVYi1q4ATKUTUxyyylVhXZrFBXSE5ntnfoHTKHEruTyPb
# G31h5mribSTWjdvY5HewHbSSPjByAWsSQg9yzcHybhORiqGQCpcGQ8zuW7oNKMPV
# JicWdoRVY4U4hR0nRdDxz9zdpQ8QYok/ginBxFaOzrCfClUB7ZOBxwRMclIghuRH
# FV+ZJk0ylVOz2tbfNxUa3KhUgTPd8jgCHFI7xak5EBRtTJiJjE03Xag1Fdxy5/D5
# tRsBBW4sOFygAhjN/xyeaRv9L8rAv3x/akriFjPUbOMLkPcJpe/DTWsP8+5LaZF8
# GkQvjsg5UvmfcJ3LFtecXxfYH4UWhDmyAjF+BswiRqafDDi2CCUmdwDnzEPbwuWO
# x1y7cgxe9SE=
# =4d/s
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 12 Oct 2023 12:20:15 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (26 commits)
block: Add assertion for bdrv_graph_wrlock()
block: Protect bs->children with graph_lock
block: Protect bs->parents with graph_lock
block: Mark bdrv_get_specific_info() and callers GRAPH_RDLOCK
block: Mark bdrv_apply_auto_read_only() and callers GRAPH_RDLOCK
block: Mark bdrv_op_is_blocked() and callers GRAPH_RDLOCK
qcow2: Mark check_constraints_on_bitmap() GRAPH_RDLOCK
qcow2: Mark qcow2_inactivate() and callers GRAPH_RDLOCK
qcow2: Mark qcow2_signal_corruption() and callers GRAPH_RDLOCK
block: Mark bdrv_amend_options() and callers GRAPH_RDLOCK
block: Mark bdrv_get_parent_name() and callers GRAPH_RDLOCK
block: Mark bdrv_primary_child() and callers GRAPH_RDLOCK
block: Mark bdrv_refresh_filename() and callers GRAPH_RDLOCK
block: Mark bdrv_get_xdbg_block_graph() and callers GRAPH_RDLOCK
block: Take graph rdlock in parts of reopen
block: Mark bdrv_snapshot_fallback() and callers GRAPH_RDLOCK
block: Mark bdrv_parent_cb_resize() and callers GRAPH_RDLOCK
block: Mark drain related functions GRAPH_RDLOCK
block: Mark bdrv_first_blk() and bdrv_is_root_node() GRAPH_RDLOCK
block: Take graph rdlock in bdrv_inactivate_all()
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixed four ufs-related coverity issues.
The coverity issues and fixes are as follows
1. CID 1519042: Security issue with the rand() function
Changed to use a fixed value (0xab) instead of rand() as
the value for testing
2. CID 1519043: Dereference after null check
Removed useless (redundant) null checks
3. CID 1519050: Out-of-bounds access issue
Fix to pass an array type variable to find_first_bit and
find_next_bit using DECLARE_BITMAP()
4. CID 1519051: Out-of-bounds read issue
Fix incorrect range check for lun
Fix coverity CID: 1519042 1519043 1519050 1519051
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
The system test shutdown uses the 'loongarch_virt_pm' region.
We can use the write AcpiFadtData.sleep_clt register to realize the shutdown.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20231012072351.1409344-1-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
In many cases we just want an effect of qmp command and want to raise
on failure. Use vm.cmd() method which does exactly this.
The commit is generated by command
git grep -l '\.qmp(' | xargs ./scripts/python_qmp_updater.py
And then, fix self.assertRaises to expect ExecuteError exception in
tests/qemu-iotests/124
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-16-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We don't expect failure here and need 'result' object. cmd() is better
in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-14-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The returned value is unused. It's simple to check by command
git grep -B 3 '\.pause_job('
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-13-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
qmp() method supports passing dict (if it doesn't need substituting
'_' to '-' in keys). So, drop some extra '**' operators.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-12-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-11-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
To simplify further conversion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-10-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-9-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Add similar method for consistency.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-8-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Use a shorter name. We are going to move in iotests from qmp() to
command() where possible. But command() is longer than qmp() and don't
look better. Let's rename.
You can simply grep for '\.command(' and for 'def command(' to check
that everything is updated (command() in tests/docker/docker.py is
unrelated).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20231006154125.1068348-6-vsementsov@yandex-team.ru
[vsementsov: also update three occurrences in
tests/avocado/machine_aspeed.py and keep r-b]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Having cmd() and command() methods in one class doesn't look good.
Rename cmd() to cmd_raw(), to show its meaning better.
We also want to rename command() to cmd() in future, so this commit is
a necessary step.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-5-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Almost all functions that access the child links already take the graph
lock now. Add locking to the remaining users and finally annotate the
struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-22-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Almost all functions that access the parent link already take the graph
lock now. Add locking to the remaining user in a test case and finally
annotate the struct field itself as protected by the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-21-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Draining recursively traverses the graph, therefore we need to make sure
that also such accesses to the graph are protected by the graph rdlock.
There are 3 different drain callers to consider:
1. drain in the main loop: no issue at all, rdlock is nop.
2. drain in an iothread: rdlock only works in main loop or coroutines,
so disallow it.
3. drain in a coroutine (regardless of AioContext): the drain mechanism
takes care of scheduling a BH in the bs->aio_context that will
then take care of perform the actual draining. This is wrong,
because as pointed in (2) if bs->aio_context is an iothread then
rdlock won't work. Therefore change bdrv_co_yield_to_drain to
schedule the BH in the main loop.
Caller (2) also implies that we need to modify test-bdrv-drain.c to
disallow draining in the iothreads.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-6-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_first_blk() and bdrv_is_root_node() need to hold a reader lock
for the graph. These functions are the only functions in block-backend.c
that access the parent list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
AIO callbacks are effectively coroutine_mixed_fn. If AIO requests don't
return immediately, their callback is called from the request coroutine.
This means that in AIO callbacks, we can't call no_coroutine_fns such as
bdrv_graph_wrlock(). Unfortunately test-bdrv-drain does so.
Change the test to use a BH to drop out of coroutine context, and add
coroutine_mixed_fn and no_coroutine_fn markers to clarify the context
each function runs in.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
npcm7xx_timer-test occasionally fails due to the state of the timers
from the previous test iteration. Advancing the clock step after the
reset resolves this issue.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1897
Signed-off-by: Chris Rauer <crauer@google.com>
Message-ID: <20230929000831.691559-1-crauer@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add smoke tests to ensure that we'll not break the 'max' CPU type when
adding new frozen/ratified RISC-V extensions.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230912132423.268494-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Python 3.12 has released, so update the test infrastructure to test
against this version. Update the configure script to look for it when an
explicit Python interpreter isn't chosen.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20231006195243.3131140-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The test bails gracefully if this module isn't installed, but linters
need a little help understanding that. It's enough to just declare the
type in this case.
(Fixes pylint complaining about use of an uninitialized variable because
it isn't wise enough to understand the notrun call is noreturn.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-id: 20231006195243.3131140-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
By using a socketpair for all of the sockets managed by the VM class and
its extensions, we don't need the sock_dir argument anymore, so remove
it.
We only added this argument so that we could specify a second, shorter
temporary directory for cases where the temp/log dirs were "too long" as
a socket name on macOS. We don't need it for this class now. In one
case, avocado testing takes over responsibility for creating an
appropriate sockdir.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230928044943.849073-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
staging
testing, gdbstub and plugin updates
- enable more sbsa-ref tests in avocado
- add swtpm to the package lists
- reduce avocado noise in gitlab by limiting tests
- make docker engine choice driven by configure and enable override
- remove unneeded gcc suffix on some cross compilers
- fix some NULL returns in gdbstub
- improve locking in execlog plugin
- introduce the GDBFeature structure
- consistently set gdb_core_xml_file
- use cleaner escaping for gdb xml
- drop ancient gdb_has_xml() test
- disable multi-instruction GUSA emulation when plugins enabled
- fix some coverity issues in plugins
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmUmVJkACgkQ+9DbCVqe
# KkTfNggAiS02FcL3faGjAN9+60xhvEQ3DJjI473hjvFWu0bSkQTjObcQqGc+V7Cw
# 9yNtnxOOWB6KdAU8At7HlVqiUXeyTCJB7Att5/UgNUZj63j+cs7PXb4p7cVCcJOc
# 17zni22tnmCBcC8wZaz0yj68jaftL3hz1QNUZOmv6CBt42q0+/4g1WKfaJ+w+SbK
# T7cJEiMDObm8qeNAAXpDLB+9v3bRDxMZ8hFJ3p3CatQC8jbDrkuH7RrVPHDWiWQx
# w0uXpUHlZEOVX23v6+iIoeb8YQW2bZI9UsfeyIHJlENaVgyL200LHgLvvAE4Qd63
# dCtfQUZzj4t9sfoL4XgxaB7G4qtXTg==
# =7PLI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 03:54:01 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-omnibus-111023-1' of https://gitlab.com/stsquad/qemu: (25 commits)
contrib/plugins: fix coverity warning in hotblocks
contrib/plugins: fix coverity warning in lockstep
contrib/plugins: fix coverity warning in cache
plugins: Set final instruction count in plugin_gen_tb_end
target/sh4: Disable decode_gusa when plugins enabled
accel/tcg: Add plugin_enabled to DisasContextBase
gdbstub: Replace gdb_regs with an array
gdbstub: Remove gdb_has_xml variable
target/ppc: Remove references to gdb_has_xml
target/arm: Remove references to gdb_has_xml
gdbstub: Use g_markup_printf_escaped()
hw/core/cpu: Return static value with gdb_arch_name()
target/arm: Move the reference to arm-core.xml
gdbstub: Introduce GDBFeature structure
contrib/plugins: Use GRWLock in execlog
plugins: Check if vCPU is realized
gdbstub: Fix target.xml response
gdbstub: Fix target_xml initialization
configure: remove gcc version suffixes
configure: allow user to override docker engine
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
There is currently no way to write a test for errors that happened in
qmp_migrate before the migration has started.
Add a version of qmp_migrate that ensures an error happens. To make
use of it a test needs to set MigrateCommon.result as
MIG_TEST_QMP_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-6-farosas@suse.de>
|
|
Use the new migrate_incoming_qmp helper in the places that currently
open-code calling migrate-incoming.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-4-farosas@suse.de>
|
|
file-based migration requires the target to initiate its migration after
the source has finished writing out the data in the file. Currently
there's no easy way to initiate 'migrate-incoming', allow this by
introducing migrate_incoming_qmp helper, similarly to migrate_qmp.
Also make sure migration events are enabled and wait for the incoming
migration to start before returning. This avoid a race when querying
the migration status too soon after issuing the command.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-3-farosas@suse.de>
|
|
The following patch will make use of this function from within
migrate-helpers.c, so move it there.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-2-farosas@suse.de>
|
|
Since 0b1a649047 (tests/docker: use direct RUNC call to build
containers) we ended up with the potential for the remaining docker.py
script calls to deviate from the direct RUNC calls. Fix this by
dropping the use of ENGINE in the makefile and rely entirely on what
we detect at configure time.
We also tweak the RUNC detection so podman users can still run things
from the source tree.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20231009164104.369749-6-alex.bennee@linaro.org>
|
|
We need this to test some TPM stuff.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-4-alex.bennee@linaro.org>
|
|
After testing locally I decided to revert a5754847e0 (tests/avocado: Disable the
test_sbsaref_edk2_firmware by default) as the test seems pretty
stable:
env QEMU_TEST_FLAKY_TESTS=1 retry.py -n 50 -c -- \
./tests/venv/bin/avocado run \
./tests/avocado/machine_aarch64_sbsaref.py:Aarch64SbsarefMachine.test_sbsaref_edk2_firmware
yields:
Results summary:
0: 50 times (100.00%), avg time 2.064 (0.04 varience/0.19 deviation)
Ran command 50 times, 50 passes
Maybe f0ec14c78c (tests/avocado: Fix console data loss) has made it
more reliable?
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-3-alex.bennee@linaro.org>
|
|
Update prebuilt firmware images:
- Neoverse V1/N2 cpu support
- non-secure EL2 virtual timer
- XHCI controller in DSDT
With those changes we can now run OpenBSD as part of sbsa-ref tests.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20230927120050.210187-2-marcin.juszkiewicz@linaro.org>
[AJB: fix whitespace and longline]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-2-alex.bennee@linaro.org>
|
|
https://gitlab.com/kraxel/qemu into staging
seabios: update to git snapshot
Give seabios a bit real world testing before tagging a release.
Update to release will follow later in the devel cycle.
v3: update mmio64 acpi test.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmUlNMUACgkQTLbY7tPo
# cTgp5RAA154WTGRGEoBveu8ocIVNzPxDB8esLBDmsQ7VSKo6e7wJvS+IyPBVYDSW
# O0p8Hr/2WlXV1BA1pVUyxzEN4AwqiRDBw4Elir6n//MF7r0wR84401hz6er+4O8j
# U/xkMXPL/mVV+dulNq+ACjt0nRWIQgdlxEnIl9AY7Nbx3l8NM70PrxRbiG/CtRUz
# gJW3uDU5xRWWGsI7tO8ZEuB2RRQ9B1uCw2ljx9QbxDonJABLUe6YVOI/QhBboX4B
# 2lIezGxRzDwvCdgHXCraakm0ZE6fL9FlHJ4tyapWt21ggkHA6+5oPcx/zisNuCIy
# EMiu6p7ttlC3AiaXUmjdCYboRzNKV+S6NvweqzQis5aUedomuFDt3yKo8BqHdzkO
# uxSFbzpVxXzSXer1OlRZfVGxME35oyfPfeRPVNpef4zg/XdtOeAhckMVHr72QqEd
# pRyR2x+CTxzJ2SsbQ21AS+0PUtEa3JHcna6VMlblCO4uRppb/cnpq6SA2m343PCB
# D9IVgtui7+VEbaTxMmkUfOLTP/+QQnF6KOCcOlGtB6HjzqNfJnwuu2k6RsYCkdZf
# 3tJIdVv72LsopZNHYrqm7iU3XpEBGqFdv3Dq3pm35uW1nRKBdr2VQPjANfttHKxd
# pUFve1EObHDRTbEFXI0ALvdlDLSX/54McTFF9BKuRPyuxJKyvPM=
# =7FXs
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 07:25:57 EDT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/seabios-20231010-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disable tests/data/acpi/q35/DSDT.mmio64 updates
tests/acpi: update expected data files
seabios: update binaries to git snapshot
seabios: update submodule to git snapshot
tests/acpi: enable tests/data/acpi/q35/DSDT.mmio64 updates
tests/bios-tables-test: tcg-emulate opteron for mmio64 test
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
0x00000000, // Granularity
0x08000000, // Range Minimum
0xAFFFFFFF, // Range Maximum
0x00000000, // Translation Offset
0xA8000000, // Length
,, , AddressRangeMemory, TypeStatic)
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
0x00000000, // Granularity
0xC0000000, // Range Minimum
0xFEBFFFFF, // Range Maximum
0x00000000, // Translation Offset
0x3EC00000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
- 0x0000000200000000, // Range Minimum
- 0x00000009FFFFFFFF, // Range Maximum
+ 0x000000FF00000000, // Range Minimum
+ 0x00000106FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000800000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
seabios starts to make the placement of the 64bit mmio window
depend on the physical address space. Run the testcase with
a fixed processor on tcg to avoid different results depending
on the host machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* util/log: re-allow switching away from stderr log file
* finish audio configuration rework
* cleanup HVF stubs
* remove more mentions of softmmu
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUi/kIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOXWwf/YW16QMzqdAPVHYRf9NcCneRF16El
# t3lEod0q0sHhchPbh9e04aKbh+oBNeWu9sFyTl11Fwsi+DGmp/b28ziva75/4rfd
# h5N9aX/z2jwPqy93IwPDu3soKXCCgTK+ywtD/5GLQwBGqxs7W2xUEEb7eCnVefHa
# zwL3MOUqPICeqOnR1TNw9k3N3veF04D+rmchTwbAjAmx1f8EI+mK9VlGK9V8TUjP
# 3HjpZYJluc0a92lR5VONJ7V25QfttsjLysTgpFwVAQPS6Frzatc/hWclfLYgw9vl
# 2Irk83FV8gXPRl0XKNcqSDsv6h/yGP6TDFIB8QwRSRGBqIQi5aOlfBJzsQ==
# =qbm7
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 08 Oct 2023 15:08:50 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
audio, qtest: get rid of QEMU_AUDIO_DRV
audio: reintroduce default audio backend for VNC
audio: do not use first -audiodev as default audio device
audio: extend -audio to allow creating a default backend
audio: extract audio_define_default
audio: disable default backends if -audio/-audiodev is used
audio: error hints need a trailing \n
cutils: squelch compiler warnings with custom paths
configure: change $softmmu to $system
system: Rename softmmu/ directory as system/
meson: Rename target_softmmu_arch -> target_system_arch
meson: Rename softmmu_mods -> system_mods
target/i386: Rename i386_softmmu_kvm_ss -> i386_kvm_ss
semihosting: Rename softmmu_FOO_user() -> uaccess_FOO_user()
gdbstub: Rename 'softmmu' -> 'system'
accel: Rename accel_softmmu* -> accel_system*
tcg: Correct invalid mentions of 'softmmu' by 'system-mode'
fuzz: Correct invalid mentions of 'softmmu' by 'system'
cpu: Correct invalid mentions of 'softmmu' by 'system-mode'
travis-ci: Correct invalid mentions of 'softmmu' by 'system'
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Default audio devices can now be created with "-audio". Tests for
soundcards were already using "-audiodev" if they want to specify a
particular backend, for the others remove the last remnants of
legacy audio configuration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-ID: <20231004090629.37473-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow a client to request a subset of negotiated meta contexts. For
example, a client may ask to use a single connection to learn about
both block status and dirty bitmaps, but where the dirty bitmap
queries only need to be performed on a subset of the disk; forcing the
server to compute that information on block status queries in the rest
of the disk is wasted effort (both at the server, and on the amount of
traffic sent over the wire to be parsed and ignored by the client).
Qemu as an NBD client never requests to use more than one meta
context, so it has no need to use block status payloads. Testing this
instead requires support from libnbd, which CAN access multiple meta
contexts in parallel from a single NBD connection; an interop test
submitted to the libnbd project at the same time as this patch
demonstrates the feature working, as well as testing some corner cases
(for example, when the payload length is longer than the export
length), although other corner cases (like passing the same id
duplicated) requires a protocol fuzzer because libnbd is not wired up
to break the protocol that badly.
This also includes tweaks to 'qemu-nbd --list' to show when a server
is advertising the capability, and to the testsuite to reflect the
addition to that output.
Of note: qemu will always advertise the new feature bit during
NBD_OPT_INFO if extended headers have alreay been negotiated
(regardless of whether any NBD_OPT_SET_META_CONTEXT negotiation has
occurred); but for NBD_OPT_GO, qemu only advertises the feature if
block status is also enabled (that is, if the client does not
negotiate any contexts, then NBD_CMD_BLOCK_STATUS cannot be used, so
the feature is not advertised).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230925192229.3186470-26-eblake@redhat.com>
[eblake: fix logic to reject unnegotiated contexts]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
All the pieces are in place for a client to finally request extended
headers. Note that we must not request extended headers when qemu-nbd
is used to connect to the kernel module (as nbd.ko does not expect
them, but expects us to do the negotiation in userspace before handing
the socket over to the kernel), but there is no harm in all other
clients requesting them.
Extended headers are not essential to the information collected during
'qemu-nbd --list', but probing for it gives us one more piece of
information in that output. Update the iotests affected by the new
line of output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230925192229.3186470-23-eblake@redhat.com>
|