| Age | Commit message (Collapse) | Author |
|---|
|
test_arm_ast2500_evb_sdk and test_arm_ast2600_evb_sdk are currently
failing. The problem is that they are trying to look for the login
prompt that does not have a newline at the end - but the logic in
_console_interaction() only handles full lines. It used to work by
accident in the past since there were sometimes kernel (warning and
error) messages popping up that finally provided a newline character
in the output, but since the tests have been changed to run with the
"quiet" kernel parameter, this is not working anymore.
To make this work reliably, we must not look for the "login:" prompt,
but have to use some text ending with a newline instead. And in the
ast2600 test, switch to ssh instead of trying to log into the serial
console - this works much more reliable and also has the benefit of
excercising the network interface here a little bit, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230421110345.1294131-3-thuth@redhat.com>
[AJB: remove stray debug log]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-10-alex.bennee@linaro.org>
|
|
This function will be useful in other tests, too, so move it to the
core LinuxSSHMixIn class.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230421110345.1294131-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-9-alex.bennee@linaro.org>
|
|
FreeBSD 13.0 has been released in April 2021:
https://www.freebsd.org/releases/13.0R/announce/
According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 in our CI now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230418160225.529172-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230424092249.58552-8-alex.bennee@linaro.org>
|
|
This change adds set of boot tests on SBSA-ref machine:
1. boot firmware up to the EDK2 banner
2. boot Alpine Linux
Prebuilt flash volumes are included, built using upstream documentation.
To unify tests for AArch64/virt and AArch64/sbsa-ref we boot
the same Alpine Linux image on both.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230323082813.971535-1-marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-Id: <20230328171426.14258-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230424092249.58552-4-alex.bennee@linaro.org>
|
|
The tuxboot images now have a stable snapshot URL so we can enable the
checksums and remove the avocado warnings. We will have to update as
old snapshots retire but that won't be too frequent.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230424092249.58552-3-alex.bennee@linaro.org>
|
|
Avocado version 101.0 has a fix to re-compute the checksum
of an asset file if the algorithm used in the *-CHECKSUM
file isn't the same as the one being passed to it by the
avocado user (i.e. the avocado_qemu python module).
In the earlier avocado versions this fix wasn't there due
to which if the checksum wouldn't match the earlier
checksum (calculated by a different algorithm), the avocado
code would start downloading a fresh image from the internet
URL thus making the test-cases take longer to execute.
Bump up the avocado-framework version to 101.0.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Tested-by: Hariharan T S <hariharan.ts@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230327115030.3418323-2-kconsul@linux.vnet.ibm.com>
Message-Id: <20230424092249.58552-2-alex.bennee@linaro.org>
|
|
QAPI patches patches for 2023-04-26
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRIvOkSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTX3MQAIqrKQbOzQ81/cDZ7aeLOroDoGYf1Cs0
# 0NiEVlyoblWNzL3HraGgXiNRTP+zaG/TcFKza1nz8qjdkxWxBjdbfF5Lm6mQf5Zo
# tcHUjksmnUlPkLYSOyEjfY9SNvcS6g7djE/NF5lbJtzYGZScZpLarELR7oUvrcXR
# AEiw8N5FZXp+j6cTeWvrLzSqz9qBsFJUCGcGER0T/Mt5MlUwDexE1xe7g8oD5l+b
# s0jeQr1PTZm5k6ehajQtgbHvAkgH8xVTKqbB/U5iz4VhYriH+IPEOtfCFt6/1soz
# pVkYikJpazCvQMjqnWu9dE1onthgSsEIOV29kFU0Kr8ATZuJBQMuLVp4hSsbKANj
# BUVyL2/fUsIp7gd+KikXUOjKYajxek6Q2YLAPpL+1pBCTql/PBQ7td8CECdiv/9e
# Xh50q+BGvyEiyoyf4EEpaLXUZog605WHEaODj9uPtNHJP9x6Rqt93FUsdWUtt/k9
# hJ8RSKy8njr0vxGoJkj89m2XfCwtuX3VQ5IXvv/If4U5Y4+JhcLtiqW+Njh8fAM4
# ZwIrlUYG7inLUKFVcQ3sEGpaj611i5ixIxctUvEiggZX+fPeSFKYUr+Rq8WXM8gv
# suLXz7VF6H4Sw30lCvdQ4LSungbzlYAtQYpmdEQGoM8iasIi4PoDf0cTYBbMYHDX
# +pZvWC50cVtf
# =wLx6
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 26 Apr 2023 06:55:53 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-04-26' of https://repo.or.cz/qemu/armbru:
qapi: allow unions to contain further unions
qapi: Improve specificity of type/member descriptions
qapi: support updating expected test output via make
qapi: Require boxed for conditional command and event arguments
qapi: Fix code generated for optional conditional struct member
tests/qapi-schema: Cover optional conditional struct member
tests/qapi-schema: Clean up positive test for conditionals
tests/qapi-schema: Rename a few conditionals
tests/qapi-schema: Improve union discriminator coverage
qapi: Fix to reject 'data': 'mumble' in struct
qapi: Fix error message when type name or array is expected
qapi: Simplify code a bit after previous commits
qapi: Improve error message for unexpected array types
qapi: Split up check_type()
qapi: Clean up after removal of simple unions
qapi/schema: Use super()
qapi: Fix error message format regression
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This extends the QAPI schema validation to permit unions inside unions,
provided the checks for clashing fields pass.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230420102619.348173-4-berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
It is possible to pass --update to tests/qapi-schema/test-qapi.py
to make it update the output files on error. This is inconvenient
to achieve though when test-qapi.py is run indirectly by make/meson.
Instead simply allow for an env variable to be set:
$ QAPI_TEST_UPDATE= make check-qapi-schema
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230420102619.348173-2-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The C code generator fails to honor 'if' conditions of command and
event arguments.
For instance, tests/qapi-schema/qapi-schema-test.json has
{ 'event': 'TEST_IF_EVENT',
'data': { 'foo': 'TestIfStruct',
'bar': { 'type': ['str'], 'if': 'TEST_IF_EVT_ARG' } },
'if': { 'all': ['TEST_IF_EVT', 'TEST_IF_STRUCT'] } }
Generated tests/test-qapi-events.h fails to honor the TEST_IF_EVT_ARG
condition:
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo, strList *bar);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Only uses so far are in tests/.
We could fix the generator to emit something like
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo
#if defined(TEST_IF_EVT_ARG)
, strList *bar
#endif
);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Ugly. Calls become similarly ugly. Not worth fixing.
Conditional arguments work fine with 'boxed': true, simply because
complex types with conditional members work fine. Not worth breaking.
Reject conditional arguments unless boxed.
Move the tests cases covering unboxed conditional arguments out of
tests/qapi-schema/qapi-schema-test.json. Cover boxed conditional
arguments there instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Union TestIfUnion is conditional on macros TEST_IF_UNION and
TEST_IF_STRUCT. It uses TestIfEnum, which is conditional on macro
TEST_IF_ENUM. If TEST_IF_UNION and TEST_IF_STRUCT are defined, but
TEST_IF_ENUM isn't, the generated code won't compile.
Command test-if-cmd is conditional an macros TEST_IF_CMD and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Event TEST_IF_EVENT is conditional an macros TEST_IF_EVT and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Replace the uses of TestIfEnum in the latter two by str.
TestIfUnion is now TestIfEnum's only user. Change TestIfEnum's
condition to TEST_IF_UNION.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message corrected]
|
|
Positive test case
{ 'enum': 'TestIfEnum',
'data': [ 'foo', { 'name' : 'bar', 'if': 'TEST_IF_ENUM_BAR' } ],
'if': 'TEST_IF_ENUM' }
generates
#if defined(TEST_IF_ENUM)
typedef enum TestIfEnum {
TEST_IF_ENUM_FOO,
#if defined(TEST_IF_ENUM_BAR)
TEST_IF_ENUM_BAR,
#endif /* defined(TEST_IF_ENUM_BAR) */
TEST_IF_ENUM__MAX,
} TestIfEnum;
Macro TEST_IF_ENUM_BAR clashes with the enumeration constant.
Wouldn't compile with -DTEST_IF_BAR.
Rename the macro to TEST_IF_ENUM_MEMBER. For consistency, rename
similar macros elsewhere as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-11-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
A union's 'discriminator' must name one of the common members.
QAPISchemaVariants.check() looks it up by its c_name(), then checks
the name matches exactly (because c_name() is not injective).
Tests union-base-empty and union-invalid-discriminator both cover the
case where lookup fails. Repurpose the latter to cover the case where
it succeeds and the name check fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-10-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
|
|
A struct's 'data' must be a JSON object defining the struct's members.
The QAPI code generator incorrectly accepts a JSON string instead, and
then crashes in QAPISchema._make_members() called from
._def_struct_type().
Fix to reject it: factor check_type_implicit() out of
check_type_name_or_implicit(), and switch check_struct() to use it
instead. Also add a test case.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[More detailed commit message]
|
|
We incorrectly report "FOO should be a type name" when it could also
be an array. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
We reject array types in certain places with "cannot be an array".
Deleting this check improves the error message to "should be a type
name" or "should be an object or type name", depending on context, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
# RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
# xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
# PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
# rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
# aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
# FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
# =+I8i
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Apr 2023 05:38:16 PM BST
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230421' of https://github.com/quic/qemu:
Hexagon (target/hexagon) Add overrides for cache/sync/barrier instructions
Hexagon (target/hexagon) Remove unused slot variable in helpers
Hexagon (tests/tcg/hexagon) Move HVX test infra to header file
Hexagon (target/hexagon) Updates to USR should use get_result_gpr
Hexagon (target/hexagon) Add overrides for count trailing zeros/ones
Hexagon (target/hexagon) Merge arguments to probe_pkt_scalar_hvx_stores
Hexagon (target/hexagon) Remove redundant/unused macros
Use black code style for python scripts
Use f-strings in python scripts
Hexagon (translate.c): avoid redundant PC updates on COF
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
* Optional use of Meson wrap for slirp
* Coverity fixes
* Avoid -Werror=maybe-uninitialized
* Mark coroutine QMP command functions as coroutine_fn
* Mark functions that suspend as coroutine_mixed_fn
* target/i386: Fix SGX CPUID leaf
* First batch of qatomic_mb_read() removal
* Small atomic.rst improvement
* NBD cleanup
* Update libvirt-ci submodule
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRBAzwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP64gf+NzLW95tylCfhKuuLq/TjuOTQqHCD
# KVLlA1I3pwJfk4SUuigrnaJtwfa/tBiWxfaivUdPAzPzeXyxcVSOps0neohrmFBh
# 2e3ylBWWz22K0gkLtrFwJT99TVy6w6Xhj9SX8HPRfxl4k8yMPrUJNW78hh6APAwq
# /etZY6+ieHC7cwG4xluhxsHnxnBYBYD+18hUd+b5LchD/yvCSCNNiursutpa0Ar/
# r/HtDwNFKlaApO3sU4R3yYgdS1Fvcas4tDZaumADsQlSG5z+UeJldc98LiRlFrAA
# gnskBSaaly/NgWqY3hVCYaBGyjD4lWPkX/FEChi0XX6Fl1P0umQAv/7z3w==
# =XSAs
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 10:17:48 AM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
tests: lcitool: Switch to OpenSUSE Leap 15.4
tests: libvirt-ci: Update to commit '2fa24dce8bc'
configure: Honour cross-prefix when finding ObjC compiler
coverity: unify Fedora dockerfiles
nbd: a BlockExport always has a BlockBackend
docs: explain effect of smp_read_barrier_depends() on modern architectures
qemu-coroutine: remove qatomic_mb_read()
postcopy-ram: do not use qatomic_mb_read
block-backend: remove qatomic_mb_read()
target/i386: Change wrong XFRM value in SGX CPUID leaf
monitor: mark mixed functions that can suspend
migration: mark mixed functions that can suspend
io: mark mixed functions that can suspend
qapi-gen: mark coroutine QMP command functions as coroutine_fn
target/mips: tcg: detect out-of-bounds accesses to cpu_gpr and cpu_gpr_hi
coverity: update COMPONENTS.md
lasi: fix RTC migration
target/i386: Avoid unreachable variable declaration in mmu_translate()
configure: Avoid -Werror=maybe-uninitialized
tests: bios-tables-test: replace memset with initializer
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://github.com/stefanberger/qemu-tpm into staging
Merge tpm 2023/04/20 v1
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
tests/avocado/aspeed: Add TPM TIS I2C test
tpm: Add support for TPM device over I2C bus
tpm: Extend common APIs to support TPM TIS I2C
docs: Add support for TPM devices over I2C bus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This will facilitate adding additional tests in separate .c files
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230406174241.853296-1-tsimpson@quicinc.com>
|
|
The following instructions are overriden
S2_ct0 Count trailing zeros
S2_ct1 Count trailing ones
S2_ct0p Count trailing zeros (register pair)
S2_ct1p Count trailing ones (register pair)
These instructions are not handled by idef-parser because the
imported semantics uses bit-reverse. However, they are
straightforward to implement in TCG with tcg_gen_ctzi_*
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405164211.30015-1-tsimpson@quicinc.com>
|
|
staging
* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
tests/vm/freebsd: Update to FreeBSD 13.2
qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
qtest: Add functions for accessing devices on Aspeed I2C controller
MAINTAINERS: Add Juan Quintela to developer guides review
cpu: Remove parameter of list_cpus()
hw/core: Move numa.c into the target independent source set
softmmu: Move dirtylimit.c into the target independent source set
hw/display: Compile vga.c as target-independent code
softmmu: Make qtest.c target independent
include/exec: Provide the tswap() functions for target independent code, too
softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
hw/char: Move two more files from specific_ss to softmmu_ss
target/i386: Set family/model/stepping of the "max" CPU according to LM bit
tests/migration: Only run auto_converge in slow mode
travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
chardev: Allow setting file chardev input file on the command line
qtest: Don't assert on "-qtest chardev:myid"
test: Fix test-crypto-secret when compiling without keyring support
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-id: 20230331173051.3857801-4-stefanb@linux.ibm.com
|
|
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-3-stefanb@linux.ibm.com
|
|
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-2-stefanb@linux.ibm.com
|
|
Add a new buildroot image based test that attaches a TPM emulator to the
I2C bus and checks for a known PCR0 value for the image that was booted.
Note that this does not tear down swtpm process when qemu execution fails.
The swtpm process will exit when qemu exits if a connection has been
made, but if the test errors before connection then the swtpm process
will still be around.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-id: 20230328120844.190914-1-joel@jms.id.au
|
|
According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 now and should switch
our FreeBSD VM to version 13 instead.
Some changes are needed for this update: The downloadable .ISO images
do not use the serial port as console by default anymore, so they
are not usable in the same way as with FreeBSD 12. Fortunately, the
FreeBSD project now also offers some pre-installed CI images that
have the serial console enabled, so we can use those now, with the
benefit that we can skip almost all parts of the previous installation
process.
Message-Id: <20230419144553.719749-1-thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-4-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230331173051.3857801-3-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Cubieboard tests end with comment "reboot not functioning; omit test".
Fix this so reboot is done at the end of each test.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-5-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Since OpenSUSE Leap 15 counts as a single major release of an LTS distribution,
lcitool has changed the target name to remove the minor version. Adjust the
mappings and refresh script.
This also updates the dockerfile to 15.4, since the 15.3 version is EOL now:
https://get.opensuse.org/leap/15.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <a408b7f241ac59e5944db6ae2360a792305c36e0.1681735482.git.pkrempa@redhat.com>
[Adjust for target name change and reword commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update to commit which has fixes needed for OpenSUSE 15.4 and
re-generate output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <bd11b5954d3dd1e989699370af2b9e2e0c77194a.1681735482.git.pkrempa@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Linux keyring support is protected by CONFIG_KEYUTILS.
We also need CONFIG_SECRET_KEYRING.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230414114252.1136-1-quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230411115231.90398-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Exercise guests with a few different modes for interrupt delivery. In
particular we want to cover:
• Xen event channel delivery via GSI to the I/O APIC
• Xen event channel delivery via GSI to the i8259 PIC
• MSIs routed to PIRQ event channels
• GSIs routed to PIRQ event channels
As well as some variants of normal non-Xen stuff like MSI to vAPIC and
PCI INTx going to the I/O APIC and PIC, which ought to still work even
in Xen mode.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-12-alex.bennee@linaro.org>
|
|
Currently our NetBSD VM recipe requests instal of the python37 package
and explicitly tells QEMU to use that version of python. Since the
NetBSD base ISO was updated to version 9.3 though, the default system
python version is 3.9 which is sufficiently new for QEMU to rely on.
Rather than requesting an older python, just test against the default
system python which is what most users will have.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124601.822209-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230403134920.2132362-10-alex.bennee@linaro.org>
|
|
The 'check' script will use "#!/usr/bin/env python3" by default
to locate python, but this doesn't work in distros which lack a
bare 'python3' binary like NetBSD.
We need to explicitly invoke 'check' by referring to the 'python'
variable in meson, which resolves to the detected python binary
that QEMU intends to use.
This fixes a regression introduced by
commit 51ab5f8bd795d8980351f8531e54995ff9e6d163
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 15 17:43:23 2023 +0000
iotests: register each I/O test separately with meson
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230329124539.822022-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230403134920.2132362-9-alex.bennee@linaro.org>
|
|
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230329142108.1199509-1-quic_mliebel@quicinc.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230403134920.2132362-8-alex.bennee@linaro.org>
|
|
Now that the previous commit ("hw/mips/gt64xxx_pci: Don't
endian-swap GT_PCI0_CFGADDR") fixed the issue accessing
the GT64120 PCI config-address register on big-endian
targets, we can enable this TuxRun test.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230223220404.63630-1-philmd@linaro.org>
|
|
The only reason to add this implementation is to control the memory allocator
used. Some users (e.g. TCG) cannot work reliably in multi-threaded
environments (e.g. forking in user-mode) with GTree's allocator, GSlice.
See https://gitlab.com/qemu-project/qemu/-/issues/285 for details.
Importing GTree is a temporary workaround until GTree migrates away
from GSlice.
This implementation is identical to that in glib v2.75.0, except that
we don't import recent additions to the API nor deprecated API calls,
none of which are used in QEMU.
I've imported tests from glib and added a benchmark just to
make sure that performance is similar. Note: it cannot be identical
because (1) we are not using GSlice, (2) we use different compilation flags
(e.g. -fPIC) and (3) we're linking statically.
$ cat /proc/cpuinfo| grep 'model name' | head -1
model name : AMD Ryzen 7 PRO 5850U with Radeon Graphics
$ echo '0' | sudo tee /sys/devices/system/cpu/cpufreq/boost
$ tests/bench/qtree-bench
Tree Op 32 1024 4096 131072 1048576
------------------------------------------------------------------------------------------------
GTree Lookup 83.23 43.08 25.31 19.40 16.22
QTree Lookup 113.42 (1.36x) 53.83 (1.25x) 28.38 (1.12x) 17.64 (0.91x) 13.04 (0.80x)
GTree Insert 44.23 29.37 25.83 19.49 17.03
QTree Insert 46.87 (1.06x) 25.62 (0.87x) 24.29 (0.94x) 16.83 (0.86x) 12.97 (0.76x)
GTree Remove 53.27 35.15 31.43 24.64 16.70
QTree Remove 57.32 (1.08x) 41.76 (1.19x) 38.37 (1.22x) 29.30 (1.19x) 15.07 (0.90x)
GTree RemoveAll 135.44 127.52 126.72 120.11 64.34
QTree RemoveAll 127.15 (0.94x) 110.37 (0.87x) 107.97 (0.85x) 97.13 (0.81x) 55.10 (0.86x)
GTree Traverse 277.71 276.09 272.78 246.72 98.47
QTree Traverse 370.33 (1.33x) 411.97 (1.49x) 400.23 (1.47x) 262.82 (1.07x) 78.52 (0.80x)
------------------------------------------------------------------------------------------------
As a sanity check, the same benchmark when Glib's version
is >= $glib_dropped_gslice_version (i.e. QTree == GTree):
Tree Op 32 1024 4096 131072 1048576
------------------------------------------------------------------------------------------------
GTree Lookup 82.72 43.09 24.18 19.73 16.09
QTree Lookup 81.82 (0.99x) 43.10 (1.00x) 24.20 (1.00x) 19.76 (1.00x) 16.26 (1.01x)
GTree Insert 45.07 29.62 26.34 19.90 17.18
QTree Insert 45.72 (1.01x) 29.60 (1.00x) 26.38 (1.00x) 19.71 (0.99x) 17.20 (1.00x)
GTree Remove 54.48 35.36 31.77 24.97 16.95
QTree Remove 54.46 (1.00x) 35.32 (1.00x) 31.77 (1.00x) 24.91 (1.00x) 17.15 (1.01x)
GTree RemoveAll 140.68 127.36 125.43 121.45 68.20
QTree RemoveAll 140.65 (1.00x) 127.64 (1.00x) 125.01 (1.00x) 121.73 (1.00x) 67.06 (0.98x)
GTree Traverse 278.68 276.05 266.75 251.65 104.93
QTree Traverse 278.31 (1.00x) 275.78 (1.00x) 266.42 (1.00x) 247.89 (0.99x) 104.58 (1.00x)
------------------------------------------------------------------------------------------------
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-2-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
|
|
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
|
|
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
|
