aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2015-07-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* crypto fixes * megasas SIGSEGV fix * memory refcount change to fix virtio hot-unplug # gpg: Signature made Tue Jul 28 08:29:07 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: memory: do not add a reference to the owner of aliased regions megasas: Add write function to handle write access to PCI BAR 3 crypto: extend unit tests to cover decryption too crypto: fix built-in AES decrypt function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-28Merge remote-tracking branch ↵Peter Maydell
'remotes/mjt/tags/pull-trivial-patches-2015-07-27' into staging trivial patches for 2015-07-27 # gpg: Signature made Mon Jul 27 20:50:14 2015 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-07-27: gdbstub: Set current CPU on interruptions qapi: add missing @ Fix Cortex-A9 global timer gitignore: Ignore shader generated files vmstate: remove unused declaration make: Clean build messages qemu-common.h: Document cutils.c string functions device_tree: Fix a typo hw/acpi/ich9: clean up stale comment about KVM not supporting SMM hw/acpi/ich9: clear smi_en on reset Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-27make: Clean build messagesStefan Weil
We want to have uniform build messages, so fix some messages which did not follow the standard pattern. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-07-27block: qemu-iotests - add check for multiplication overflow in vpcJeff Cody
This checks that VPC is able to successfully fail (without segfault) on an image file with a max_table_entries that exceeds 0x40000000. This table entry is within the valid range for VPC (although too large for this sample image). Cc: qemu-stable@nongnu.org Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-07-27crypto: extend unit tests to cover decryption tooDaniel P. Berrange
The current unit test only verifies the encryption API, resulting in us missing a recently introduced bug in the decryption API from commit d3462e3. It was fortunately later discovered & fixed by commit bd09594, thanks to the QEMU I/O tests for qcow2 encryption, but we should really detect this directly in the crypto unit tests. Also remove an accidental debug message and simplify some asserts. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1437468902-23230-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-24rcu: actually register threads that have RCU read-side critical sectionsPaolo Bonzini
Otherwise, grace periods are detected too early! Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-22AioContext: fix broken ctx->dispatching optimizationPaolo Bonzini
This patch rewrites the ctx->dispatching optimization, which was the cause of some mysterious hangs that could be reproduced on aarch64 KVM only. The hangs were indirectly caused by aio_poll() and in particular by flash memory updates's call to blk_write(), which invokes aio_poll(). Fun stuff: they had an extremely short race window, so much that adding all kind of tracing to either the kernel or QEMU made it go away (a single printf made it half as reproducible). On the plus side, the failure mode (a hang until the next keypress) made it very easy to examine the state of the process with a debugger. And there was a very nice reproducer from Laszlo, which failed pretty often (more than half of the time) on any version of QEMU with a non-debug kernel; it also failed fast, while still in the firmware. So, it could have been worse. For some unknown reason they happened only with virtio-scsi, but that's not important. It's more interesting that they disappeared with io=native, making thread-pool.c a likely suspect for where the bug arose. thread-pool.c is also one of the few places which use bottom halves across threads, by the way. I hope that no other similar bugs exist, but just in case :) I am going to describe how the successful debugging went... Since the likely culprit was the ctx->dispatching optimization, which mostly affects bottom halves, the first observation was that there are two qemu_bh_schedule() invocations in the thread pool: the one in the aio worker and the one in thread_pool_completion_bh. The latter always causes the optimization to trigger, the former may or may not. In order to restrict the possibilities, I introduced new functions qemu_bh_schedule_slow() and qemu_bh_schedule_fast(): /* qemu_bh_schedule_slow: */ ctx = bh->ctx; bh->idle = 0; if (atomic_xchg(&bh->scheduled, 1) == 0) { event_notifier_set(&ctx->notifier); } /* qemu_bh_schedule_fast: */ ctx = bh->ctx; bh->idle = 0; assert(ctx->dispatching); atomic_xchg(&bh->scheduled, 1); Notice how the atomic_xchg is still in qemu_bh_schedule_slow(). This was already debated a few months ago, so I assumed it to be correct. In retrospect this was a very good idea, as you'll see later. Changing thread_pool_completion_bh() to qemu_bh_schedule_fast() didn't trigger the assertion (as expected). Changing the worker's invocation to qemu_bh_schedule_slow() didn't hide the bug (another assumption which luckily held). This already limited heavily the amount of interaction between the threads, hinting that the problematic events must have triggered around thread_pool_completion_bh(). As mentioned early, invoking a debugger to examine the state of a hung process was pretty easy; the iothread was always waiting on a poll(..., -1) system call. Infinite timeouts are much rarer on x86, and this could be the reason why the bug was never observed there. With the buggy sequence more or less resolved to an interaction between thread_pool_completion_bh() and poll(..., -1), my "tracing" strategy was to just add a few qemu_clock_get_ns(QEMU_CLOCK_REALTIME) calls, hoping that the ordering of aio_ctx_prepare(), aio_ctx_dispatch, poll() and qemu_bh_schedule_fast() would provide some hint. The output was: (gdb) p last_prepare $3 = 103885451 (gdb) p last_dispatch $4 = 103876492 (gdb) p last_poll $5 = 115909333 (gdb) p last_schedule $6 = 115925212 Notice how the last call to qemu_poll_ns() came after aio_ctx_dispatch(). This makes little sense unless there is an aio_poll() call involved, and indeed with a slightly different instrumentation you can see that there is one: (gdb) p last_prepare $3 = 107569679 (gdb) p last_dispatch $4 = 107561600 (gdb) p last_aio_poll $5 = 110671400 (gdb) p last_schedule $6 = 110698917 So the scenario becomes clearer: iothread VCPU thread -------------------------------------------------------------------------- aio_ctx_prepare aio_ctx_check qemu_poll_ns(timeout=-1) aio_poll aio_dispatch thread_pool_completion_bh qemu_bh_schedule() At this point bh->scheduled = 1 and the iothread has not been woken up. The solution must be close, but this alone should not be a problem, because the bottom half is only rescheduled to account for rare situations (see commit 3c80ca1, thread-pool: avoid deadlock in nested aio_poll() calls, 2014-07-15). Introducing a third thread---a thread pool worker thread, which also does qemu_bh_schedule()---does bring out the problematic case. The third thread must be awakened *after* the callback is complete and thread_pool_completion_bh has redone the whole loop, explaining the short race window. And then this is what happens: thread pool worker -------------------------------------------------------------------------- <I/O completes> qemu_bh_schedule() Tada, bh->scheduled is already 1, so qemu_bh_schedule() does nothing and the iothread is never woken up. This is where the bh->scheduled optimization comes into play---it is correct, but removing it would have masked the bug. So, what is the bug? Well, the question asked by the ctx->dispatching optimization ("is any active aio_poll dispatching?") was wrong. The right question to ask instead is "is any active aio_poll *not* dispatching", i.e. in the prepare or poll phases? In that case, the aio_poll is sleeping or might go to sleep anytime soon, and the EventNotifier must be invoked to wake it up. In any other case (including if there is *no* active aio_poll at all!) we can just wait for the next prepare phase to pick up the event (e.g. a bottom half); the prepare phase will avoid the blocking and service the bottom half. Expressing the invariant with a logic formula, the broken one looked like: !(exists(thread): in_dispatching(thread)) => !optimize or equivalently: !(exists(thread): in_aio_poll(thread) && in_dispatching(thread)) => !optimize In the correct one, the negation is in a slightly different place: (exists(thread): in_aio_poll(thread) && !in_dispatching(thread)) => !optimize or equivalently: (exists(thread): in_prepare_or_poll(thread)) => !optimize Even if the difference boils down to moving an exclamation mark :) the implementation is quite different. However, I think the new one is simpler to understand. In the old implementation, the "exists" was implemented with a boolean value. This didn't really support well the case of multiple concurrent event loops, but I thought that this was okay: aio_poll holds the AioContext lock so there cannot be concurrent aio_poll invocations, and I was just considering nested event loops. However, aio_poll _could_ indeed be concurrent with the GSource. This is why I came up with the wrong invariant. In the new implementation, "exists" is computed simply by counting how many threads are in the prepare or poll phases. There are some interesting points to consider, but the gist of the idea remains: 1) AioContext can be used through GSource as well; as mentioned in the patch, bit 0 of the counter is reserved for the GSource. 2) the counter need not be updated for a non-blocking aio_poll, because it won't sleep forever anyway. This is just a matter of checking the "blocking" variable. This requires some changes to the win32 implementation, but is otherwise not too complicated. 3) as mentioned above, the new implementation will not call aio_notify when there is *no* active aio_poll at all. The tests have to be adjusted for this change. The calls to aio_notify in async.c are fine; they only want to kick aio_poll out of a blocking wait, but need not do anything if aio_poll is not running. 4) nested aio_poll: these just work with the new implementation; when a nested event loop is invoked, the outer event loop is never in the prepare or poll phases. The outer event loop thus has already decremented the counter. Reported-by: Richard W. M. Jones <rjones@redhat.com> Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-5-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-22tests: remove irrelevant assertions from test-aioPaolo Bonzini
In these tests, the purpose of the initial calls to aio_poll and g_main_context_iteration is simply to put the AioContext in a known state; the return value of the function does not really matter. The next patch will change those return values; change the assertions to a while loop which expresses the intention better. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 1437487673-23740-3-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-21Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Mon Jul 20 19:27:04 2015 BST using RSA key ID AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: tests: Fix broken targets check-report-qtest-* ahci: Force ICC bits in PxCMD to zero qtest/ide: add another short PRDT test flavor Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-20tests: Fix broken targets check-report-qtest-*Stefan Weil
They need QTEST_QEMU_IMG. Without it, the tests raise an assertion: $ make -C bin check-report-qtest-i386.xml make: Entering directory 'bin' GTESTER check-report-qtest-i386.xml blkdebug: Suspended request 'A' blkdebug: Resuming request 'A' ahci-test: tests/libqos/libqos.c:162: mkimg: Assertion `qemu_img_path' failed. main-loop: WARNING: I/O thread spun for 1000 iterations Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1437231284-17455-1-git-send-email-sw@weilnetz.de Signed-off-by: John Snow <jsnow@redhat.com>
2015-07-20qtest/ide: add another short PRDT test flavorStefan Hajnoczi
The existing short PRDT test case does not transfer any data because the first PRD is less than 1 sector. This patch adds another short PRDT test case where the first sector can be read but the PRDT is still smaller than the requested number of sectors. This exercises a different code path in ide_dma_cb(). Cc: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1435770571-9906-1-git-send-email-stefanha@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-07-20timer: rename NSEC_PER_SEC due to Mac OS X header clashStefan Hajnoczi
Commit e0cf11f31c24cfb17f44ed46c254d84c78e7f6e9 ("timer: Use a single definition of NSEC_PER_SEC for the whole codebase") renamed NANOSECONDS_PER_SECOND to NSEC_PER_SEC. On Mac OS X there is a <dispatch/time.h> system header which also defines NSEC_PER_SEC. This causes compiler warnings. Let's use the old name instead. It's longer but it doesn't clash. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1436364609-7929-1-git-send-email-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Bugfixes and Daniel Berrange's crypto library. # gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: ossaudio: fix memory leak ui: convert VNC to use generic cipher API block: convert qcow/qcow2 to use generic cipher API ui: convert VNC websockets to use crypto APIs block: convert quorum blockdrv to use crypto APIs crypto: add a nettle cipher implementation crypto: add a gcrypt cipher implementation crypto: introduce generic cipher API & built-in implementation crypto: move built-in D3DES implementation into crypto/ crypto: move built-in AES implementation into crypto/ crypto: introduce new module for computing hash digests vl: move rom_load_all after machine init done Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08libqos/ahci: fix ahci_write_fis for ncq on ppc64John Snow
Don't try to correct the endianness of NCQ commands, which do not use any fields wider than a single byte. This corrects the /x86_64/ahci/io/ncq/simple test (and others) for ppc64 BE hosts. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: John Snow <jsnow@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1436210229-4118-2-git-send-email-jsnow@redhat.com
2015-07-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,virtio,pci: fixes and updates Most notably, this includes the TCO support for ICH: the last feature for 2.4 as we are entering the hard freeze. Bugfixes only from now on. virtio pci also gained cfg access capability - arguably a bugfix since virtio spec makes it mandatory, but it's a big patch. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed Jul 8 10:40:07 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: tco-test: fix up config accesses and re-enable virtio fix cfg endian-ness for BE targets virtio-pci: implement cfg capability virtio: define virtio_pci_cfg_cap in header. pcie: Set the "link active" in the link status register pci_regs.h: import from linux virtio_net: reuse constants from linux hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init() hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS hw/i386/pc: factor out pc_cmos_init_floppy() ich9: implement strap SPKR pin logic tests: add testcase for TCO watchdog emulation ich9: add TCO interface emulation acpi: split out ICH ACPI support Revert "dataplane: allow virtio-1 devices" dataplane: fix cross-endian issues Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08crypto: introduce generic cipher API & built-in implementationDaniel P. Berrange
Introduce a generic cipher API and an implementation of it that supports only the built-in AES and DES-RFB algorithms. The test suite checks the supported algorithms + modes to validate that every backend implementation is actually correctly complying with the specs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-5-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08tco-test: fix up config accesses and re-enableMichael S. Tsirkin
The mistake that made the test fail was that it tried to use a BAR address as an offset for config accesses to LPC. Config accesses don't need a BAR, and LPC does not have one. Don't attempt to map it. With this change applied, TCO test passes, so re-enable it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-08ich9: implement strap SPKR pin logicPaulo Alcantara
If the signal is sampled high, this indicates that the system is strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system reboot feature). The status of this strap is readable via the NO_REBOOT bit (CC: offset 0x3410:bit 5). The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit may be set or cleared by software if the strap is sampled low but may not override the strap when it indicates "No Reboot". This patch implements the logic where hardware has ability to set SPKR pin through a property named "noreboot" and it's sampled high by default. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-08tests: add testcase for TCO watchdog emulationPaulo Alcantara
This patch adds a testcase that covers the following: 1) TCO default values 2) first and second TCO timeout 3) watch and validate ticks counter through TCO_RLD register 4) maximum supported TCO timeout (0x3ff) 5) watchdog actions (pause/reset/shutdown/none) upon second TCO timeout 6) set and get of TCO control and status bits MST: The test does not pass yet, so it's disabled by default. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue Jul 7 13:38:13 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: rocker: tests: don't need to specify master/self when setting vlans rocker: mark copy-to-cpu pkts as forwarding offloaded rocker: return -1 when dropping packet on ingress rocker: fix missing break statements rocker: fix misplaced break statement rocker: don't queue receive pkts when port is disabled vmxnet3: Fix incorrect small packet padding e1000: flush packets when link comes up rocker: fix memory leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150707-1' into ↵Peter Maydell
staging virtio-gpu property fixes, add testcase # gpg: Signature made Tue Jul 7 10:24:16 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150707-1: virtio-gpu: add to display-vga test virtio-gpu: use virtio_instance_init_common, fixup properties virtio-gpu: update console device property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07rocker: tests: don't need to specify master/self when setting vlansScott Feldman
4.1 Linux kernel doesn't require specifying "master" or "self" when setting vlans on a port, so clean these up from the tests that use vlans. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Message-id: 1435746792-41278-6-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-07crypto: introduce new module for computing hash digestsDaniel P. Berrange
Introduce a new crypto/ directory that will (eventually) contain all the cryptographic related code. This initially defines a wrapper for initializing gnutls and for computing hashes with gnutls. The former ensures that gnutls is guaranteed to be initialized exactly once in QEMU regardless of CLI args. The block quorum code currently fails to initialize gnutls so it only works by luck, if VNC server TLS is not requested. The hash APIs avoids the need to litter the rest of the code with preprocessor checks and simplifies callers by allocating the correct amount of memory for the requested hash. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07virtio-gpu: add to display-vga testGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-07-04qtest/ahci: halted ncq migration testJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435767578-32743-15-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: halted NCQ testJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435767578-32743-10-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: ncq migration testJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-17-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: simple ncq data testJohn Snow
Test the NCQ pathways for a simple IO RW test. Also, test that libqos doesn't explode when running NCQ commands :) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-16-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: Force all NCQ commands to be LBA48John Snow
NCQ commands are LBA48 by definition. See SATA 3.2 13.6.4.1 "READ FPDMA QUEUED", or SATA 3.2 13.6.5.1 "WRITE FPDMA QUEUED." Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-15-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: set the NCQ tag on command_commitJohn Snow
NCQ commands have the concept of a "TAG" that they need to set, but in the AHCI world, it is mandated that the TAG always match the command slot that you executed the NCQ from. See AHCI 9.3.1.1.5.2 "Native Queued Commands". Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-14-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: adjust expected NCQ interruptsJohn Snow
NCQ commands will expect the SDBS interrupt, and in the normative case, do not expect to see a D2H Register FIS unless something went wrong. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-13-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: edit wait to be ncq awareJohn Snow
The wait command should check to make sure SACT is clear as well as the Command Issue register. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-12-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: add NCQ frame supportJohn Snow
NCQ frames are generated a little differently than their non-NCQ cousins. Add support for them. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-11-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: fix cmd_sanity for ncqJohn Snow
NCQ commands should not / do not update the byte count in the command header post command, so this field is meaningless for NCQ tests. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-10-git-send-email-jsnow@redhat.com
2015-07-04ahci/qtest: Execute IDENTIFY prior to data commandsJohn Snow
If you try to execute an NCQ command before trying to engage with the device by issuing an IDENTIFY command, the error bits that are part of the signature will fool the test suite into thinking there was a failure. Issue IDENTIFY first on "boot", which will clear the signature out of the registers for us. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-9-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: add port_reset testJohn Snow
Test that we can survive a couple of cycles of running a basic identify test, some IO, and resetting the HBA. Ensures that we can bring the HBA back to compliant spec during the lifecycle of the VM. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1434470575-21625-5-git-send-email-jsnow@redhat.com
2015-07-04libqos/ahci: fix memory management bugsJohn Snow
There's a handful of trivial bugs in the libqos/ahci functions, squish them together. - Zero cached pointers after freeing them - The Command List Buffer is an array of 32x 32 byte structures, not 32x 8 byte pointers -- it's 1MiB, not 256 bytes. Zero it ALL. - Free the correct command in ahci_pick_cmd. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1434470575-21625-4-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: add test_maxJohn Snow
Test that the FIS delivered after a nondata command has appropriately updated registers, just as we'd expect a data command to do. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1434470575-21625-3-git-send-email-jsnow@redhat.com
2015-07-02iotests: Use event_wait in wait_readyFam Zheng
Only poll the specific type of event we are interested in, to avoid stealing events that should be consumed by someone else. Suggested-by: John Snow <jsnow@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02qemu-iotests: Add test case for mirror with unmapFam Zheng
This checks that the discard on mirror source that effectively zeroes data is also reflected by the data of target. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02qemu-iotests: Make block job methods commonFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02timer: Use a single definition of NSEC_PER_SEC for the whole codebaseAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: c6e55468856ba0b8f95913c4da111cc0ef266541.1434113783.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02qapi: Rename 'dirty-bitmap' mode to 'incremental'John Snow
If we wish to make differential backups a feature that's easy to access, it might be pertinent to rename the "dirty-bitmap" mode to "incremental" to make it clear what /type/ of backup the dirty-bitmap is helping us perform. This is an API breaking change, but 2.4 has not yet gone live, so we have this flexibility. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-24qemu-iotests: fix 051.out after qdev error message changeStefan Hajnoczi
Commit f006cf7fa9a63ba8e4ccf57d46231ce594301727 ("qdev-monitor: Propagate errors through qdev_device_add()") dropped a meaningless error message. This change in output caused qemu-iotests 051 to fail: QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed. -QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be initialized Update 051.out so the test passes again. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1435071369-30936-1-git-send-email-stefanha@redhat.com
2015-06-23util/hbitmap: Add an API to reset all set bits in hbitmapWen Congyang
The function bdrv_clear_dirty_bitmap() is updated to use faster hbitmap_reset_all() call. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 555E868A.60506@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22qobject: Use 'bool' for qboolEric Blake
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * Changes to name string ownership for alias properties * Improvements around enum properties * Cleanups around -object handling * New helper functions * Cleanups of qdev init helper functions * Add path argument to qom-tree script * QTest cleanup to use new qtest_add_data_func() consistently # gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: qdev: Un-deprecate qdev_init_nofail() qdev: Deprecated qdev_init() is finally unused, drop qom: Don't pass string table to object_get_enum() function qom: Add an object_property_add_enum() helper function qom: Make enum string tables const-correct qom: Add object_new_with_props() / object_new_withpropv() helpers qom: Add helper function for getting user objects root vl: Create (most) objects before creating chardev backends doc: Document user creatable object types in help text backends: Fix typename of 'policy' enum property in hostmem obj scripts: Add support for path as argument of qom-tree tests: Use qtest_add_data_func() consistently qdev: Free property names after registering gpio aliases qom: strdup() target property name on object_property_add_alias() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-22Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* i8254 security fix * Avoid long 100% CPU wait after restarting guests that use the periodic timer * Fixes for access clamping (WinXP, MIPS) * wixl/.msi support for qemu-ga on Windows # gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: exec: clamp accesses against the MemoryRegionSection exec: do not clamp accesses to MMIO regions mc146818rtc: Reset the periodic timer on load qemu-timer: Call clock reset notifiers on forward jumps tests: virtio-scsi: Add test for unaligned WRITE SAME tests: virtio-scsi: Move start/stop to individual test functions libqos: Complete virtio device ID definition list libqos: Allow calling guest_free on NULL pointer tests: Link libqos virtio object to virtio-scsi-test i8254: fix out-of-bounds memory access in pit_ioport_read() qemu-ga: Building Windows MSI installation with configure/Makefile qemu-ga: Introduce Windows MSI script qemu-ga: debug printouts to help troubleshoot installation qemu-ga: adding vss-[un]install options qemu-log: Open file for logging when specified Signed-off-by: Peter Maydell <peter.maydell@linaro.org>