aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-07-04Merge remote-tracking branch 'remotes/armbru/tags/pull-build-2019-07-02-v2' ↵Peter Maydell
into staging Build system patches for 2019-07-02 # gpg: Signature made Wed 03 Jul 2019 12:44:28 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-build-2019-07-02-v2: Makefile: Reuse all's recursion machinery for clean and install Makefile: Rename targets for make recursion Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.def Makefile: Remove code to smooth transition to config.status Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/python-next-pull-request' into staging Python queue, 2019-07-01 * Deprecate Python 2 support (Eduardo Habkost) * qemu/__init__.py refactor (John Snow) * make qmp-shell work with python3 (Igor Mammedov) # gpg: Signature made Mon 01 Jul 2019 23:28:27 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/python-next-pull-request: Deprecate Python 2 support machine.py: minor delinting python/qemu: split QEMUMachine out from underneath __init__.py qmp: make qmp-shell work with python3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jul-02-2019' ↵Peter Maydell
into staging MIPS queue for July 2nd, 2019 # gpg: Signature made Tue 02 Jul 2019 17:09:29 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-jul-02-2019: target/mips: Correct helper for MSA FCLASS.<W|D> instructions target/mips: Unroll loops for MSA float max/min instructions target/mips: Correct comments in msa_helper.c target/mips: Correct comments in translate.c tcg/tests: target/mips: Correct MSA test compilation and execution order tcg/tests: target/mips: Amend MSA integer multiply tests tcg/tests: target/mips: Amend MSA fixed point multiply tests hw/mips: Express dependencies of the r4k platform with Kconfig hw/mips: Express dependencies of the Jazz machine with Kconfig hw/mips: Express dependencies of the MIPSsim machine with Kconfig hw/mips: Explicit the semi-hosting feature is always required tests/machine-none: Test recent MIPS cpus Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03Makefile: Rename targets for make recursionMarkus Armbruster
We make a few sub-directories recursively, in particular $(TARGET_DIRS). For goal "all", we do it the nice way: "all" has a prerequisite subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make recursively. Behaves nicely with -j and -k. For other goals such as "clean" and "install", the recipe runs make recursively in a for loop. Ignores -j and -k. The next commit will fix that for "clean" and "install". This commit prepares the ground by renaming the targets we use for "all" to include the goal for the sub-make. This will permit reusing them for goals other than "all". Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename to T/all, and declare phony. Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default goal is "all" for all R. Rename to pc-bios/R/all, and declare phony. The remainder are renamed just for consistency. Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to dtc/all, and declare phony. Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE) in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony. Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and declare phony. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-4-armbru@redhat.com> [Add compatibility gunk to keep make working across the rename]
2019-07-02Merge remote-tracking branch ↵Peter Maydell
'remotes/philmd-gitlab/tags/pflash-next-20190701' into staging Implement the following AMD command-set parallel flash functionality: - nonuniform sector sizes; - erase suspend/resume commands; and - multi-sector erase. # gpg: Signature made Tue 02 Jul 2019 01:54:33 BST # gpg: using RSA key E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/pflash-next-20190701: (27 commits) hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit hw/block/pflash_cfi02: Document commands hw/block/pflash_cfi02: Use chip erase time specified in the CFI table hw/block/pflash_cfi02: Implement erase suspend/resume hw/block/pflash_cfi02: Implement multi-sector erase hw/block/pflash_cfi02: Fix reset command not ignored during erase hw/block/pflash_cfi02: Fix CFI in autoselect mode hw/block/pflash_cfi02: Split if() condition hw/block/pflash_cfi02: Extract pflash_regions_count() hw/block/pflash_cfi02: Implement nonuniform sector sizes hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported hw/block/pflash_cfi02: Hold the PRI table offset in a variable hw/block/pflash_cfi02: Document the current CFI values hw/block/pflash_cfi02: Remove pointless local variable tests/pflash-cfi02: Refactor to support testing multiple configurations hw/block/pflash_cfi02: Fix command address comparison hw/block/pflash_cfi02: Unify the MemoryRegionOps hw/block/pflash_cfi02: Extract the pflash_data_read() function hw/block/pflash_cfi02: Use the ldst API in pflash_read() hw/block/pflash_cfi02: Use the ldst API in pflash_write() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-07-02' ↵Peter Maydell
into staging Block patches for 4.1-rc0: - The stream job no longer relies on a fixed base node - The rbd block driver can now accomodate growing formats like qcow2 # gpg: Signature made Tue 02 Jul 2019 02:56:06 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-07-02: block/stream: introduce a bottom node block/stream: refactor stream_run: drop goto block: include base when checking image chain for block allocation block/rbd: increase dynamically the image size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 02 Jul 2019 03:21:54 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: migration/colo.c: Add missed filter notify for Xen COLO. COLO-compare: Add colo-compare remote notify support COLO-compare: Make the compare_chr_send() can send notification message. COLO-compare: Add remote notification chardev handler frame COLO-compare: Add new parameter to communicate with remote colo-frame net/announce: Expand test for stopping self announce net/announce: Add HMP optional ID net/announce: Add optional ID net/announce: Add HMP optional interface list net/announce: Allow optional list of interfaces net: remove unused get_str_sep() function net: use g_strsplit() for parsing host address and port net: avoid using variable length array in net_client_init() net: fix assertion failure when ipv6-prefixlen is not a number ftgmac100: do not link to netdev qemu-bridge-helper: Document known shortcomings MAINTAINERS: Add qemu-bridge-helper.c to "Network device backends" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02tcg/tests: target/mips: Correct MSA test compilation and execution orderAleksandar Markovic
Correct MSA test compilation and execution order, for the sake of consistence. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tcg/tests: target/mips: Amend MSA integer multiply testsAleksandar Markovic
Amend MSA fixed point multiply tests: correct output values for MADDV.B, MADDV.H, MADDV.W, MADDV.D, MSUBV.B, MSUBV.H, MSUBV.W and MSUBD.D. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tcg/tests: target/mips: Amend MSA fixed point multiply testsAleksandar Markovic
Amend MSA fixed point multiply tests: add tests for MADD_Q.H, MADD_Q.W, MADDR_Q.H, MADDR_Q.W, MSUB_Q.H, MSUB_Q.W, MSUBR_Q.H and MSUBR_Q.W. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1562068213-11307-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-07-02tests/machine-none: Test recent MIPS cpusPhilippe Mathieu-Daudé
The MIPS I7200 got added in commit d45942d908e, and the I6500 in commit ca1ffd14ed8. Extend the coverage on the little-endian machines. The 4Kc and 20Kc are still covered by the big-endian machines. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701140143.32706-1-philmd@redhat.com>
2019-07-02Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into stagingPeter Maydell
- cleanup/refactoring in the cpu feature code - fix for a tcg test case - halt/clear support for vfio-ccw, and use a new helper # gpg: Signature made Mon 01 Jul 2019 12:08:41 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190701: s390x: add cpu feature/model files to KVM section vfio-ccw: support async command subregion vfio-ccw: use vfio_set_irq_signaling s390x/cpumodel: Prepend KDSA features with "KDSA" s390x/cpumodel: Rework CPU feature definition tests/tcg/s390x: Fix alignment of csst parameter list Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02net/announce: Expand test for stopping self announceDr. David Alan Gilbert
Expand self-announce test to check we can stop an announce timer. We set it up to send 300 packets, but after we receive the first one we tell it to stop. We error if: a) We receive more than 30 of the packets b) We're still receiving packets after a lot longer than the 30 seconds should have arrived Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02block/stream: introduce a bottom nodeAndrey Shinkevich
The bottom node is the intermediate block device that has the base as its backing image. It is used instead of the base node while a block stream job is running to avoid dependency on the base that may change due to the parallel jobs. The change may take place due to a filter node as well that is inserted between the base and the intermediate bottom node. It occurs when the base node is the top one for another commit or stream job. After the introduction of the bottom node, don't freeze its backing child, that's the base, anymore. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1559152576-281803-4-git-send-email-andrey.shinkevich@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02hw/block/pflash_cfi02: Implement erase suspend/resumeStephen Checkoway
During a sector erase (but not a chip erase), the embeded erase program can be suspended. Once suspended, the sectors not selected for erasure may be read and programmed. Autoselect mode is allowed during erase suspend mode. Presumably, CFI queries are similarly allowed so this commit allows them as well. Since guest firmware can use status bits DQ7, DQ6, DQ3, and DQ2 to determine the current state of sector erasure, these bits are properly implemented. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-10-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Implement multi-sector eraseStephen Checkoway
After two unlock cycles and a sector erase command, the AMD flash chips start a 50 us erase time out. Any additional sector erase commands add a sector to be erased and restart the 50 us timeout. During the timeout, status bit DQ3 is cleared. After the time out, DQ3 is asserted during erasure. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-9-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Fix CFI in autoselect modeStephen Checkoway
After a flash device enters CFI mode from autoselect mode, the reset command returns the device to autoselect mode. An additional reset command is necessary to return to read array mode. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-7-stephen.checkoway@oberlin.edu> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Implement nonuniform sector sizesStephen Checkoway
Some flash chips support sectors of different sizes. For example, the AMD AM29LV160DT has 31 64 kB sectors, one 32 kB sector, two 8 kB sectors, and a 16 kB sector, in that order. The AM29LV160DB has those in the reverse order. The `num-blocks` and `sector-length` properties work exactly as they did before: a flash device with uniform sector lengths. To get non-uniform sector lengths for up to four regions, the following properties may be set - region 0. `num-blocks0` and `sector-length0`; - region 1. `num-blocks1` and `sector-length1`; - region 2. `num-blocks2` and `sector-length2`; and - region 3. `num-blocks3` and `sector-length3`. If the uniform and nonuniform properties are set, then both must specify a flash device with the same total size. It would be better to disallow both being set, or make `num-blocks0` and `sector-length0` alias `num-blocks` and `sector-length`, but that would make testing currently impossible. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Rebased, add assert() on pri_offset] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02tests/pflash-cfi02: Refactor to support testing multiple configurationsPhilippe Mathieu-Daudé
Introduce the FlashConfig structure, to be able to run the same set of tests on different flash models/configurations. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: Extracted from bigger patch] Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02hw/block/pflash_cfi02: Fix command address comparisonStephen Checkoway
Most AMD commands only examine 11 bits of the address. This masks the addresses used in the comparison to 11 bits. The exceptions are word or sector addresses which use offset directly rather than the shifted offset, boff. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-4-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02tests/pflash-cfi02: Add test for supported CFI commandsStephen Checkoway
Test the AMD command set for parallel flash chips. This test uses an ARM musicpal board with a pflash drive to test the following list of currently-supported commands. - Autoselect - CFI - Sector erase - Chip erase - Program - Unlock bypass - Reset Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Message-Id: <20190426162624.55977-2-stephen.checkoway@oberlin.edu> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [PMD: reworded the patch subject, g_assert_cmpint -> cmphex] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-01python/qemu: split QEMUMachine out from underneath __init__.pyJohn Snow
It's not obvious that something named __init__.py actually houses important code that isn't relevant to python packaging glue. Move the QEMUMachine and related error classes out into their own module. Adjust users to the new import location. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20190627212816.27298-2-jsnow@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-01Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-26-2019' ↵Peter Maydell
into staging MIPS queue for June 2016th, 2019 # gpg: Signature made Wed 26 Jun 2019 12:38:58 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-jun-26-2019: target/mips: Fix big endian host behavior for interleave MSA instructions tests/tcg: target/mips: Fix some test cases for pack MSA instructions tests/tcg: target/mips: Add support for MSA MIPS32R6 testings tests/tcg: target/mips: Add support for MSA big-endian target testings tests/tcg: target/mips: Amend tests for MSA int multiply instructions tests/tcg: target/mips: Amend tests for MSA int dot product instructions tests/tcg: target/mips: Add tests for MSA move instructions tests/tcg: target/mips: Add tests for MSA bit move instructions dma/rc4030: Minor code style cleanup dma/rc4030: Fix off-by-one error in specified memory region size hw/mips/gt64xxx_pci: Align the pci0-mem size hw/mips/gt64xxx_pci: Convert debug printf()s to trace events hw/mips/gt64xxx_pci: Use qemu_log_mask() instead of debug printf() hw/mips/gt64xxx_pci: Fix 'spaces' coding style issues hw/mips/gt64xxx_pci: Fix 'braces' coding style issues hw/mips/gt64xxx_pci: Fix 'tabs' coding style issues hw/mips/gt64xxx_pci: Fix multiline comment syntax Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-26tests/tcg: target/mips: Fix some test cases for pack MSA instructionsAleksandar Markovic
Fix certian test cases for MSA pack instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-8-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Add support for MSA MIPS32R6 testingsAleksandar Markovic
Add files for MSA MIPS32R6 target testings (copiling and running). Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Add support for MSA big-endian target testingsAleksandar Markovic
Add files for MSA big-endian target testings (copiling and running). Little-endian files are renamed and ammended too. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Amend tests for MSA int multiply instructionsAleksandar Markovic
Amend tests for MSA int multiply instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-5-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Amend tests for MSA int dot product instructionsAleksandar Markovic
Add tests for instructions whose result depends on the value in destination register (prior to instruction execution). Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-4-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Add tests for MSA move instructionsAleksandar Markovic
Add tests for MSA move instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-26tests/tcg: target/mips: Add tests for MSA bit move instructionsAleksandar Markovic
Add tests for MSA bit move instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561543629-20327-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-24Merge tag 's390x-tcg-2019-06-21' into s390-next-stagingCornelia Huck
One fix for a tcg test case and two cleanups/refactorings of cpu feature definitions. # gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST # gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A # gpg: issuer "david@redhat.com" # gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full] # gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full] * tag 's390x-tcg-2019-06-21': s390x/cpumodel: Prepend KDSA features with "KDSA" s390x/cpumodel: Rework CPU feature definition tests/tcg/s390x: Fix alignment of csst parameter list Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-24iotests: Fix 205 for concurrent runsMax Reitz
Tests should place their files into the test directory. This includes Unix sockets. 205 currently fails to do so, which prevents it from being run concurrently. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190618210238.9524-1-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24ssh: switch from libssh2 to libsshPino Toscano
Rewrite the implementation of the ssh block driver to use libssh instead of libssh2. The libssh library has various advantages over libssh2: - easier API for authentication (for example for using ssh-agent) - easier API for known_hosts handling - supports newer types of keys in known_hosts Use APIs/features available in libssh 0.8 conditionally, to support older versions (which are not recommended though). Adjust the iotest 207 according to the different error message, and to find the default key type for localhost (to properly compare the fingerprint with). Contributed-by: Max Reitz <mreitz@redhat.com> Adjust the various Docker/Travis scripts to use libssh when available instead of libssh2. The mingw/mxe testing is dropped for now, as there are no packages for it. Signed-off-by: Pino Toscano <ptoscano@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190620200840.17655-1-ptoscano@redhat.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24vmdk: Reduce the max bound for L1 table sizeSam Eiderman
512M of L1 entries is a very loose bound, only 32M are required to store the maximal supported VMDK file size of 2TB. Fixed qemu-iotest 59# - now failure occures before on impossible L1 table size. Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Eyal Moscovici <eyal.moscovici@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Message-id: 20190620091057.47441-3-shmuel.eiderman@oracle.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24iotest 134: test cluster-misaligned encrypted writeAnton Nefedov
COW (even empty/zero) areas require encryption too Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 20190516143028.81155-1-anton.nefedov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-21tests/tcg/s390x: Fix alignment of csst parameter listRichard Henderson
The parameter list given in general register 1 shall be aligned on a quadword boundary. This test currently succeeds or fails depending on the compiler version used and the accidential layout of the function's stack frame. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-21tests/tcg: target/mips: Amend tests for MSA pack instructionsAleksandar Markovic
Add tests for cases when destination register is the same as one of source registers. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561031359-6727-3-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-21tests/tcg: target/mips: Include isa/ase and group name in test outputAleksandar Markovic
For better appearance and usefullnes, include ISA/ASE name and instruction group name in the output of tests. For example, all this data will be displayed for FMAX_A.W test: | MSA | Float Max Min | FMAX_A.W | | PASS: 80 | FAIL: 0 | elapsed time: 0.16 ms | (the data will be displayed in one row; they are presented here in two rows not to exceed the width of the commit message) Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1561031359-6727-2-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-18iotests: Test failure to loosen restrictionsMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18block: drop bs->jobVladimir Sementsov-Ogievskiy
Drop remaining users of bs->job: 1. assertions actually duplicated by assert(!bs->refcnt) 2. trace-point seems not enough reason to change stream_start to return BlockJob pointer 3. Restricting creation of two jobs based on same bs is bad idea, as 3.1 Some jobs creates filters to be their main node, so, this check don't actually prevent creating second job on same real node (which will create another filter node) (but I hope it is restricted by other mechanisms) 3.2 Even without bs->job we have two systems of permissions: op-blockers and BLK_PERM 3.3 We may want to run several jobs on one node one day And finally, drop bs->job pointer itself. Hurrah! Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18iotests: Hide timestamps for skipped testsMax Reitz
Currently, the "thistime" variable is not reinitialized on every loop iteration. This leads to tests that do not yield a run time (because they failed or were skipped) printing the run time of the previous test that did. Fix that by reinitializing "thistime" for every test. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()Kevin Wolf
Most callers know which monitor type they want to have. Instead of calling monitor_init() with flags that can describe both types of monitors, make monitor_init_{hmp,qmp}() public interfaces that take specific bools instead of flags and call these functions directly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-15-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-16tests/rebuild-expected-aml.sh: blow out difflistMichael S. Tsirkin
As expected files have been updated, make sure we do not forget to remove them from the allowed diff list. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-16q35: update DSDTMichael S. Tsirkin
update expected files and drop them from allowed diff list. Fixes: 4a4418369d6 ("q35: fix mmconfig and PCI0._CRS") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-16q35: fix mmconfig and PCI0._CRSGerd Hoffmann
This patch changes the handling of the mmconfig area. Thanks to the pci(e) expander devices we already have the logic to exclude address ranges from PCI0._CRS. We can simply add the mmconfig address range to the list get it excluded as well. With that in place we can go with a fixed pci hole which covers the whole area from the end of (low) ram to the ioapic. This will make the whole logic alot less fragile. No matter where the firmware places the mmconfig xbar, things should work correctly. The guest also gets a bit more PCI address space (seabios boot): # cat /proc/iomem [ ... ] 7ffdd000-7fffffff : reserved 80000000-afffffff : PCI Bus 0000:00 <<-- this is new b0000000-bfffffff : PCI MMCONFIG 0000 [bus 00-ff] b0000000-bfffffff : reserved c0000000-febfffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:01.0 [ ... ] So this is a guest visible change. Cc: László Érsek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190607073429.3436-1-kraxel@redhat.com>
2019-06-14iotests: Test qemu-img convert -C --salvageMax Reitz
We do not support this combination (yet), so this should yield an error message. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190507203508.18026-8-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14iotests: Test qemu-img convert --salvageMax Reitz
This test converts a simple image to another, but blkdebug injects block_status and read faults at some offsets. The resulting image should be the same as the input image, except that sectors that could not be read have to be 0. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190507203508.18026-7-mreitz@redhat.com Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [mreitz: Dropped superfluous printf from _filter_offsets, as suggested by Vladimir; disable test for VDI and IMGOPTSSYNTAX] Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14blockdev: Overlays are not snapshotsMax Reitz
There are error messages which refer to an overlay node as the snapshot. That is wrong, those are two different things. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20190603202236.1342-3-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14iotests: restrict 254 to support only qcow2Vladimir Sementsov-Ogievskiy
Test fails at least for qcow, because of different cluster sizes in base and top (and therefore different granularities of bitmaps we are trying to merge). The test aim is to check block-dirty-bitmap-merge between different nodes functionality, no needs to check all formats. So, let's just drop support for anything except qcow2. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190605155405.104384-1-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14iotests: Fix intermittent failure in 219Max Reitz
In 219, we wait for the job to make progress before we emit its status. This makes the output reliable. We do not wait for any more progress if the job's current-progress already matches its total-progress. Unfortunately, there is a bug: Right after the job has been started, it's possible that total-progress is still 0. In that case, we may skip the first progress-making step and keep ending up 64 kB short. To fix that bug, we can simply wait for total-progress to reach 4 MB (the image size) after starting the job. Reported-by: Karen Mezick <kmezick@redhat.com> Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1686651 Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20190516161114.27596-1-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> [mreitz: Adjusted commit message as per John's proposal] Signed-off-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-25 02:18:45 +0000