aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2017-01-12Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20170110' into stagingPeter Maydell
TCG opcodes for extract, clz, ctz, ctpop # gpg: Signature made Wed 11 Jan 2017 02:12:41 GMT # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-tcg-20170110: (65 commits) tcg/i386: Handle ctpop opcode tcg/ppc: Handle ctpop opcode tcg: Use ctpop to generate ctz if needed tests: New test-bitcnt qemu/host-utils.h: Reduce the operation count in the fallback ctpop target-i386: Use ctpop helper target-tilegx: Use ctpop helper target-sparc: Use ctpop helper target-s390x: Avoid a loop for popcnt target-ppc: Use ctpop helper target-alpha: Use ctpop helper tcg: Add opcode for ctpop target-xtensa: Use clrsb helper target-tricore: Use clrsb helper target-arm: Use clrsb helper tcg: Add helpers for clrsb tcg/i386: Rely on undefined/undocumented behaviour of BSF/BSR tcg/i386: Handle ctz and clz opcodes tcg/i386: Allow bmi2 shiftx to have non-matching operands tcg/i386: Hoist common arguments in tcg_out_op ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-12libqtest: handle zero length memwrite/memreadGreg Kurz
Some recently added tests pass a zero length to qtest_memwrite(). Unfortunately, the qtest protocol doesn't implement an on-the-wire syntax for zero-length writes and the current code happily sends garbage to QEMU. This causes intermittent failures. It isn't worth the pain to enhance the protocol, so this patch simply fixes the issue by "just return, doing nothing". The same fix is applied to qtest_memread() since the issue also exists in the QEMU part of the "memread" command. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 148412457273.22750.983275587432075569.stgit@bahia Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-10tests: New test-bitcntAlex Bennée
Add some unit tests for bit count functions (currently only ctpop). As the routines are based on the Hackers Delight optimisations I based the test patterns on their tests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10acpi-test: update expected filesMichael S. Tsirkin
clean up warnings after latest hotplug changes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10tests: pc: add memory hotplug acpi tables testsIgor Mammedov
This also adds SRAT and DSDT blobs for memory hotplug variant Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, vhost, pc: fixes Here are some bugfixes that didn't make 2.8. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio: avoid using guest_notifier_mask in vhost-user mode pci: fix error message for express slots i386: amd_iommu: fix MMIO register count and access tests/vhost-user-bridge: use contrib/libvhost-user contrib: add libvhost-user tests/vhost-user-bridge: do not accept more than one connection tests/vhost-user-bridge: indicate peer disconnected tests/vhost-user-bridge: remove unnecessary dispatcher_remove tests/vhost-user-bridge: remove false comment Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09blkverify: Implement bdrv_co_preadv/pwritev/flushKevin Wolf
This enables byte granularity requests for blkverify, and at the same time gets us rid of another user of the BDS-level AIO emulation. The reference output of a test case must be changed because the verification failure message reports byte offsets instead of sectors now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-05Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 04 Jan 2017 13:29:09 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: iothread: add poll-grow and poll-shrink parameters aio: self-tune polling time virtio: disable virtqueue notifications during polling aio: add .io_poll_begin/end() callbacks virtio: turn vq->notification into a nested counter virtio-scsi: suppress virtqueue kick during processing virtio-blk: suppress virtqueue kick during processing iothread: add polling parameters linux-aio: poll ring for completions virtio: poll virtqueues for new buffers aio: add polling mode to AioContext aio: add AioPollFn and io_poll() interface aio: add flag to skip fds to aio_dispatch() HACKING: document #include order Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-03aio: add AioPollFn and io_poll() interfaceStefan Hajnoczi
The new AioPollFn io_poll() argument to aio_set_fd_handler() and aio_set_event_handler() is used in the next patch. Keep this code change separate due to the number of files it touches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03tests: virtio-9p: ".." cannot be used to walk out of the shared directoryGreg Kurz
According to the 9P spec at http://man.cat-v.org/plan_9/5/intro, the parent directory of the root directory of a server's tree is itself. This test hence checks that the qid of the root directory as returned by attach is the same as the qid of ".." when walking from the root directory. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: no slash in path elements during walkGreg Kurz
The walk operation is expected to fail and to return ENOENT. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add walk operation testGreg Kurz
The walk operation is used to traverse the directory tree and to associate paths to fids. A single walk can be used to traverse up to P9_MAXWELEM path elements at the same time. The test creates a path with P9_MAXWELEM elements on the backend (à la 'mkdir -p') and issues a walk operation. The walk is expected to succeed without error. Reference: http://man.cat-v.org/plan_9/5/walk Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add attach operation testGreg Kurz
The attach operation is used to establish a connection between the client and the server. After this, the client is able to access the underlying filesystem and do I/O. This test simply ensures the operation succeeds without error. Reference: http://man.cat-v.org/plan_9/5/attach Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: add version operation testGreg Kurz
This patch lays the foundations to be able to test 9P operations and provides a test for the version operation as a first example. A 9P request is composed of a T-message sent by the client (guest) to the server (QEMU), and a R-message sent by the server back to the client. The following general calls are available to implement requests for any 9P operations: v9fs_req_init(): allocates the request structure and the guest memory for the T-message v9fs_req_send(): allocates the guest memory for the R-message and sends the T-message to QEMU v9fs_req_recv(): waits for QEMU to answer and does some sanity checks on the returned R-message header v9fs_req_free(): releases the guest memory and the request structure Helpers are provided, to be used by each specific 9P operation to copy data to/from the guest memory. The version operation is used to negotiate the 9P protocol version to be used and the maximum buffer size for exchanged data. It is necessarily the first message of a 9P session. For simplicity, the maximum buffer size is hardcoded to 4k, which should be enough for functional tests. The test simply advertises the "9P2000.L" version to QEMU and expects QEMU to answer it is supported. References: http://man.cat-v.org/plan_9/5/intro http://man.cat-v.org/plan_9/5/version Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: code refactoringGreg Kurz
This moves the test_share static and the QOSState into the QVirtIO9P structure, and put PCI related code in functions with a _pci_ name. This will avoid code duplication in future tests, and allow to add support for non-PCI platforms. Signed-off-by: Greg Kurz <groug@kaod.org>
2017-01-03tests: virtio-9p: rename PCI configuration testGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org>
2016-12-22Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/pull-qcrypto-2016-12-21-2' into staging Merge qcrypto 2016/12/21 v2 # gpg: Signature made Thu 22 Dec 2016 10:46:17 GMT # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qcrypto-2016-12-21-2: crypto: add HMAC algorithms testcases crypto: support HMAC algorithms based on nettle crypto: support HMAC algorithms based on glib crypto: support HMAC algorithms based on libgcrypt crypto: add HMAC algorithms framework configure: add CONFIG_GCRYPT_HMAC item crypto: add 3des-ede support when using libgcrypt/nettle cipher: fix leak on initialization error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-22crypto: add HMAC algorithms testcasesLongpeng(Mike)
This patch add HMAC algorithms testcases Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-12-21crypto: add 3des-ede support when using libgcrypt/nettleLongpeng(Mike)
Libgcrypt and nettle support 3des-ede, so this patch add 3des-ede support when using libgcrypt or nettle. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-16tests/vhost-user-bridge: use contrib/libvhost-userMarc-André Lureau
Use the libvhost-user library. This ended up being a rather large patch that cannot be easily splitted, due to massive code move and API changes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16tests/vhost-user-bridge: do not accept more than one connectionMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16tests/vhost-user-bridge: indicate peer disconnectedMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16tests/vhost-user-bridge: remove unnecessary dispatcher_removeMarc-André Lureau
The call fd is not watched Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16tests/vhost-user-bridge: remove false commentMarc-André Lureau
dispatcher_remove() is in use. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-06tests/.gitignore: Ignore test-charChanglong Xie
[Lin Ma <lma@suse.com> notes that commit ea3af47d added test for chardev unit tests, but didn't add the name of generated binary in .gitignore. --Stefan] Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 1478494765-13233-1-git-send-email-xiecl.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06Merge remote-tracking branch 'kwolf/tags/for-upstream' into stagingStefan Hajnoczi
Block layer patches for 2.8.0-rc3 # gpg: Signature made Tue 06 Dec 2016 02:44:39 PM GMT # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * kwolf/tags/for-upstream: qcow2: Don't strand clusters near 2G intervals during commit Message-id: 1481037418-10239-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-12-06qcow2: Don't strand clusters near 2G intervals during commitEric Blake
The qcow2_make_empty() function is reached during 'qemu-img commit', in order to clear out ALL clusters of an image. However, if the image cannot use the fast code path (true if the image is format 0.10, or if the image contains a snapshot), the cluster size is larger than 512, and the image is larger than 2G in size, then our choice of sector_step causes problems. Since it is not cluster aligned, but qcow2_discard_clusters() silently ignores an unaligned head or tail, we are leaving clusters allocated. Enhance the testsuite to expose the flaw, and patch the problem by ensuring our step size is aligned. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-12-05tests: Avoid qobject_from_jsonf("%"PRId64)Eric Blake
The qobject_from_jsonf() function implements a pseudo-printf language for creating a QObject; however, it is hard-coded to only parse a subset of formats understood by -Wformat, and is not a straight synonym to bare printf(). In particular, any use of an int64_t integer works only if the system's definition of PRId64 matches what the parser expects; which works on glibc (%lld or %ld depending on 32- vs. 64-bit) and mingw (%I64d), but not on Mac OS (%qd). Rather than enhance the parser, it is just as easy to force the use of int (where the value is small enough) or long long instead of int64_t, which we know always works. This should cover all remaining testsuite uses of qobject_from_json[fv]() that were trying to rely on PRId64, although my proof for that was done by adding in asserts and checking that 'make check' still passed, where such asserts are inappropriate during hard freeze. A later series in 2.9 may remove all dynamic JSON parsing, but that's a bigger task. Reported by: G 3 <programmingkidx@gmail.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1479922617-4400-4-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rename value64 to value_ll] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-12-05test-qga: Avoid qobject_from_jsonv("%"PRId64)Eric Blake
The qobject_from_jsonv() function implements a pseudo-printf language for creating a QObject; however, it is hard-coded to only parse a subset of formats understood by -Wformat, and is not a straight synonym to bare printf(). In particular, any use of an int64_t integer works only if the system's definition of PRId64 matches what the parser expects; which works on glibc (%lld or %ld depending on 32- vs. 64-bit) and mingw (%I64d), but not on Mac OS (%qd). Rather than enhance the parser, it is just as easy to use normal printf() for this particular conversion, matching what is done elsewhere in this file [1], which is safe in this instance because the format does not contain any of the problematic differences (bare '%' or the '%s' format). The use of PRId64 for a variable named 'pid' is gross, but it is a sad reality of the 64-bit mingw environment, which mistakenly defines pid_t as a 64-bit type even though getpid() returns 'int' on that platform [2]. Our definition of the QGA GuestExec type defines 'pid' as a 64-bit entity, and we can't tighten it to 'int32' unless the mingw header is fixed. Using 'long long' instead of 'int64_t' just so that we can stick with qobject_from_jsonv("%lld") instead of printf() is not any prettier, since we may have later type churn anyways. [1] see 'git grep -A2 strdup_printf tests/test-qga.c' [2] https://bugzilla.redhat.com/show_bug.cgi?id=1397787 Reported by: G 3 <programmingkidx@gmail.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1479922617-4400-3-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-11-23tests/postcopy: Use KVM on ppc64 only if it is KVM-HVThomas Huth
The ppc64 postcopy test does not work with KVM-PR, and it is also causing annoying warning messages when run on a x86 host. So let's use KVM here only if we know that we're running with KVM-HV (which automatically also means that we're running on a ppc64 host), and fall back to TCG otherwise. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-15test-replication: fix leaksMarc-André Lureau
ASAN spotted: SUMMARY: AddressSanitizer: 301990288 byte(s) leaked in 33 allocation(s). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20161109104547.23861-1-marcandre.lureau@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15Merge remote-tracking branch 'jtc/tags/block-pull-request' into stagingStefan Hajnoczi
# gpg: Signature made Tue 15 Nov 2016 04:10:29 AM GMT # gpg: using RSA key 0xBDBE7B27C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" # Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057 * jtc/tags/block-pull-request: mirror: do not flush every time the disks are synced block/curl: Do not wait for data beyond EOF block/curl: Remember all sockets block/curl: Fix return value from curl_read_cb block/curl: Use BDRV_SECTOR_SIZE block/curl: Drop TFTP "support" qemu-iotests: avoid spurious failure on test 109 iotests: add transactional failure race test blockjob: refactor backup_start as backup_job_create blockjob: add block_job_start blockjob: add .start field blockjob: add .clean property blockjob: fix dead pointer in txn list Message-id: 1479183291-14086-1-git-send-email-jcody@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15Merge remote-tracking branch 'dgibson/tags/ppc-for-2.8-20161115' into stagingStefan Hajnoczi
ppc patch queue 2016-11-15 Latest set of ppc and spapr related patches. Highlights are: * More POWER9 instructions * Fix some subtle outstanding bugs * Add some extra tests One patch affects bitops.h, so isn't strictly ppc related. # gpg: Signature made Tue 15 Nov 2016 02:46:48 AM GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * dgibson/tags/ppc-for-2.8-20161115: boot-serial-test: Add a test for the powernv machine tests: add XSCOM tests for the PowerNV machine ppc/pnv: Fix fatal bug on 32-bit hosts ppc/pnv: fix xscom address translation for POWER9 ppc/pnv: add a 'xscom_core_base' field to PnvChipClass spapr-vty: Fix bad assert() statement FU exceptions should carry a cause (IC) spapr: Fix migration of PCI host bridges from qemu-2.7 target-ppc: Implement bcdctz. instruction target-ppc: Implement bcdcfz. instruction target-ppc: Implement bcdctn. instruction target-ppc: Implement bcdcfn. instruction ppc: Remove some stub POWER6 models ppc/pnv: fix compile breakage on old gcc powernv: CPU compatibility modes don't make sense for powernv target-ppc: add vprtyb[w/d/q] instructions target-ppc: add vrldnm and vrlwnm instructions target-ppc: add vrldnmi and vrlwmi instructions bitops: fix rol/ror when shift is zero Message-id: 1479178144-28153-1-git-send-email-david@gibson.dropbear.id.au Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15Merge remote-tracking branch 'quintela/tags/migration/20161114' into stagingStefan Hajnoczi
migration/next for 20161114 # gpg: Signature made Mon 14 Nov 2016 07:55:42 PM GMT # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20161114: migration: Fix return code of ram_save_iterate() tests/test-vmstate.c: add array of pointer to struct tests/test-vmstate.c: add save_buffer util func migration: fix missing assignment for has_x_checkpoint_delay Message-id: 1479153474-2401-1-git-send-email-quintela@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-14qemu-iotests: avoid spurious failure on test 109Paolo Bonzini
In some cases it is possible that query-io-status is called just before the job is completed, causing -{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "src", "len": 31457280, "offset": OFFSET, "speed": 0, "type": "mirror", "error": "Operation not permitted"}} -{"return": []} +{"return": [{"io-status": "ok", "device": "src", "busy": true, "len": 31457280, "offset": OFFSET, "paused": false, "speed": 0, "ready": false, "type": "mirror"}]} Assert that the completeion event eventually happens. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161109162008.27287-1-pbonzini@redhat.com Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14iotests: add transactional failure race testJohn Snow
Add a regression test for the case found by Vladimir. Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478587839-9834-7-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-14blockjob: add block_job_startJohn Snow
Instead of automatically starting jobs at creation time via backup_start et al, we'd like to return a job object pointer that can be started manually at later point in time. For now, add the block_job_start mechanism and start the jobs automatically as we have been doing, with conversions job-by-job coming in later patches. Of note: cancellation of unstarted jobs will perform all the normal cleanup as if the job had started, particularly abort and clean. The only difference is that we will not emit any events, because the job never actually started. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1478587839-9834-5-git-send-email-jsnow@redhat.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-11-15boot-serial-test: Add a test for the powernv machineThomas Huth
The new powernv machine ships with a firmware that outputs some text to the serial console, so we can automatically test this machine type in the boot-serial tester, too. And to get some (very limited) test coverage for the new POWER9 CPU emulation, too, this test is also started with "-cpu POWER9". Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-15tests: add XSCOM tests for the PowerNV machineDavid Gibson
Add a couple of tests on the XSCOM bus of the PowerNV machine for the the POWER8 and POWER9 CPUs. The first tests reads the CFAM identifier of the chip. The second test goes further in the XSCOM address space and reaches the cores to read their DTS registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Fixed an incorrect indentation, and a Makefile problem]] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-11-14Merge remote-tracking branch 'jsnow/tags/ide-pull-request' into stagingStefan Hajnoczi
# gpg: Signature made Mon 14 Nov 2016 04:16:48 PM GMT # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * jsnow/tags/ide-pull-request: ahci-test: add QMP tray test for ATAPI libqos/ahci: Add get_sense and test_ready libqos/ahci: Add ATAPI tray macros libqos/ahci: Support expected errors libqtest: add qmp_eventwait_ref block-backend: Always notify on blk_eject ahci-test: test atapi read_cd with bcl, nb_sectors = 0 ahci-test: Create smaller test ISO images atapi: classify read_cd as conditionally returning data Message-id: 1479140746-22142-1-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-14ahci-test: add QMP tray test for ATAPIJohn Snow
Test QMP events for a CDROM device with or without a media inserted, including both guest-initiated and hw-initiated eject/load requests. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-7-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14libqos/ahci: Add get_sense and test_readyJohn Snow
Required for tray tests once a medium may have changed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-6-git-send-email-jsnow@redhat.com [Line length edit --js] Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14libqos/ahci: Add ATAPI tray macrosJohn Snow
(1) Add START_STOP_UNIT command to ahci-test suite (2) Add eject/start macro commands; this is not a data transfer command so it is not well-served by the existing generic pipeline. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-5-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14libqos/ahci: Support expected errorsJohn Snow
Sometimes we know we'll get back an error, so let's have the test framework understand that. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-4-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14libqtest: add qmp_eventwait_refJohn Snow
Wait for an event, but return a copy so we can investigate parameters. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1478553214-497-3-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14ahci-test: test atapi read_cd with bcl, nb_sectors = 0John Snow
Commit 9ef2e93f introduced the concept of tagging ATAPI commands as NONDATA, but this introduced a regression for certain commands better described as CONDDATA. read_cd is such a command that both requires a non-zero BCL if a transfer size is set, but is perfectly content to accept a zero BCL if the transfer size is 0. This test adds a regression test for the case where BCL and nb_sectors are both 0. Flesh out the CDROM tests by: (1) Allowing the test to specify a BCL (2) Allowing the buffer comparison test to compare a 0-size buffer (3) Fix the BCL specification in libqos (It is LE, not BE) (4) Add a nice human-readable message for future SCSI command additions Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1477970211-25754-4-git-send-email-jsnow@redhat.com [Line length edit --js] Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14ahci-test: Create smaller test ISO imagesJohn Snow
These can simply be the size of the number of sectors we're reading, plus one for a buffer. We don't need them to be any larger. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1477970211-25754-3-git-send-email-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2016-11-14Merge remote-tracking branch 'kwolf/tags/for-upstream' into stagingStefan Hajnoczi
Block layer patches for 2.8.0-rc0 # gpg: Signature made Fri 11 Nov 2016 03:46:12 PM GMT # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * kwolf/tags/for-upstream: raw-posix: Rename 'raw_s' to 'rs' iotests: Always use -machine accel=qtest iotests: Skip test 162 if there is no SSH support block: Emit modules in bdrv_iterate_format() block: Fix bdrv_iterate_format() sorting nfs: Fix memory leak in nfs_file_create() qcow2: Remove stale FIXME comment raw_bsd: don't check size alignment when only offset is set raw_bsd: move check to prevent overflow hmp: Make block_stream set an explicit job ID block/ssh: Code cleanup for unused parameter block/nbd: Fix the leaked visitor Message-id: 1478883311-24052-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-14tests/test-vmstate.c: add array of pointer to structHalil Pasic
Increase test coverage by adding tests for the macro VMSTATE_ARRAY_OF_POINTER_TO_STRUCT. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 01:52:05 +0000