aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2024-04-09target/sh4: Fix mac.w with saturation enabledZack Buhman
The saturation arithmetic logic in helper_macw is not correct. I tested and verified this behavior on a SH7091. Reviewd-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Zack Buhman <zack@buhman.org> Message-Id: <20240405233802.29128-3-zack@buhman.org> [rth: Reformat helper_macw, add a test case.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-04-09target/sh4: Fix mac.l with saturation enabledZack Buhman
The saturation arithmetic logic in helper_macl is not correct. I tested and verified this behavior on a SH7091. Signed-off-by: Zack Buhman <zack@buhman.org> Message-Id: <20240404162641.27528-2-zack@buhman.org> [rth: Reformat helper_macl, add a test case.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-04-09tcg/optimize: Do not attempt to constant fold neg_vecRichard Henderson
Split out the tail of fold_neg to fold_neg_no_const so that we can avoid attempting to constant fold vector negate. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2150 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-02qtest/libqos: Reduce size_to_prdtl() declaration scopePhilippe Mathieu-Daudé
Since size_to_prdtl() is only used within ahci.c, declare it statically. This removes the last use of "inlined function with external linkage". See previous commit and commit 9de9fa5cf2 for rationale. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20240326171009.26696-4-philmd@linaro.org>
2024-04-02tests/qtest: Fix STM32L4x5 GPIO test on 32-bitCédric Le Goater
The test mangles the GPIO address and the pin number in the qtest_add_data_func data parameter. Doing so, it assumes that the host pointer size is always 64-bit, which breaks on 32-bit : ../tests/qtest/stm32l4x5_gpio-test.c: In function ‘test_gpio_output_mode’: ../tests/qtest/stm32l4x5_gpio-test.c:272:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 272 | unsigned int pin = ((uint64_t)data) & 0xF; | ^ ../tests/qtest/stm32l4x5_gpio-test.c:273:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 273 | uint32_t gpio = ((uint64_t)data) >> 32; | ^ To fix, improve the mangling of the GPIO address and pin number fields by using GPIO_SIZE so that the resulting value fits in a 32-bit pointer. While at it, include some helpers to hide the details. Cc: Arnaud Minier <arnaud.minier@telecom-paris.fr> Cc: Inès Varhol <ines.varhol@telecom-paris.fr> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-id: 20240329092747.298259-1-clg@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-31Merge tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu ↵Peter Maydell
into staging Various fixes for recent regressions and new code. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmYJEQMACgkQZ7MCdqhi # HK6l0BAAkVf/BXKJxMu3jLvCpK/fBYGytvfHBR9PdWeBwIirqsk3L8eI/Fb5qkMZ # NMrfECyHR9LTcWb6/Pi/PGciNNWeyleN6IuVBeWfraIFyfHcxpwEKH8P+cXr5EWq # WDg+1GUt9+FHuAC9UdGZ81UzX7qeI9VfD3wHceqJ/XRU3qjj67DPZjTpsvxuP64+ # N7MhdEM69F34uiIAn1aNCceXiS00dvtu6lDl3+18TzT8sNc6S3qdyxVcqfRhTJfY # FMZIN3j2hQrVOElEQE9vAOeJyjAQCM+U0y3XZIZHFUw/GTwKV0tm08RFnnxprteG # 67vR5uXrDEELnU/1PA1YeyaBMA3Z3Nc36XbGf8zTD6rKkS2z0lWMcs72pPIxbMXj # c4FdnHaE+Q5ngy5s1p6bm5xM7WOEhrsJkgIu2N0weRroe0nAxywDWw3uQlMoV8Oc # Xet/xM2IKdc0PLzTvFO7xKnW3oqavJ4CX/6XgrGBoMDZKO1JRqaMixGtYKmoH/1h # 96+jdRbPTZAY8aoiFWW7t065lvdWt74A6QITcn2Kqm04j3MGJfyWMU6dakBzwuri # PhOkf40o8qn8KN0JNfSO+IXhYVRRotLO/s9H7TEyQiXm25qrGMIF9FErnbDseZil # rGR4eL0lcwJboYH9RSRWg0NNqpUekvqBzdnS+G0Ad3J+qaMYoik= # =7UPB # -----END PGP SIGNATURE----- # gpg: Signature made Sun 31 Mar 2024 08:30:11 BST # gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE # gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE * tag 'pull-ppc-for-9.0-3-20240331' of https://gitlab.com/npiggin/qemu: tests/avocado: ppc_hv_tests.py set alpine time before setup-alpine tests/avocado: Fix ppc_hv_tests.py xorriso dependency guard target/ppc: Do not clear MSR[ME] on MCE interrupts to supervisor target/ppc: Fix GDB register indexing on secondary CPUs target/ppc: Restore [H]DEXCR to 64-bits target/ppc/mmu-radix64: Use correct string format in walk_tree() hw/ppc/spapr: Include missing 'sysemu/tcg.h' header spapr: nested: use bitwise NOT operator for flags check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-31Merge tag 'pull-9p-20240329' of https://github.com/cschoenebeck/qemu into ↵Peter Maydell
staging Changes for 9p tests only: * Fix 9p tests for riscv. * Re-enable 9p 'local' tests for running in CI pipelines. # -----BEGIN PGP SIGNATURE----- # # iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmYGf9oXHHFlbXVfb3Nz # QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5Xy6RAApJ+UCRRf5fbZ6DRKm8ZVVwXa # YVtwDYy1fEbljN2kud1WeRiw+pTOa/8W4h/QzgR+q0SN3RKhGvGvmKf+X1N+/Z0H # YpOG1fDmgnyh20VNIwZi2WSoX0pS8DQrlWgGCmsWdOjLmflq4qUJSQ/p/Z2Z0OFJ # V90w5CtPpFq1X8LgPMKHXe2U0orBlPU3zguw6LPYFPp4LY3p3me9TkufcnuIW3Xg # Mxp+ZYvkKER9vfhgH0Yz0MecQGkfIEKdP3KNQCgwvynPTbDzXCEj0iaASD5+8dP4 # u8AEoBQccONRm9+iQn1Fk1nhTDTjmhdrD0yfbwqJzbOy4k0W/wFpOR2l+J1QqvFX # 3LdmalzJ6ZHaT5Kl7QDJj6lBNfVZ9QUS7WKiVnDM5ifoqlfzTgFEr6RXdqSgc/oy # ax+zF0PhTDckg7/kRCXh+60/kMXG1L2PmlbCOccuk9Z0P9T0GrFhWlvs9Kq+URPh # r/amaV7+p2XmK/v4sF+IcgZaXwD8ppLFjFVie1/Ol/6kUakzO5Co0WRgCDDW8HkK # aJz9OBmJnS8Fzf0WwwKMzoNKwrmjiaF9DXIlMYc2carZ4OJNS5ZVpG6Lh/MD8keg # otzoQpUhfyvu5BZH2sSMrVOJy1VtjP89pcF++zQ5T2RgODCVb0WOgPPS3q1NQowm # hoxlKvVGZfK/gKOd1+E= # =xodL # -----END PGP SIGNATURE----- # gpg: Signature made Fri 29 Mar 2024 08:46:18 GMT # gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395 # gpg: issuer "qemu_oss@crudebyte.com" # gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4 # Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395 * tag 'pull-9p-20240329' of https://github.com/cschoenebeck/qemu: qtest/virtio-9p-test.c: remove g_test_slow() gate qtest/virtio-9p-test.c: create/remove temp dirs after each test Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-30tests/avocado: ppc_hv_tests.py set alpine time before setup-alpineNicholas Piggin
If the time is wrong, setup-alpine SSL certificate checks can fail. setup-alpine is used to bring up the network, but it doesn't seem to to set NTP time before the failing SSL checks. This test has recently started failing presumably because the default time has now fallen too far behind. Fix this by setting time from the host time before running setup-alpine. Fixes: c9cb496710758 ("tests/avocado: ppc add hypervisor tests") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
2024-03-30tests/avocado: Fix ppc_hv_tests.py xorriso dependency guardNicholas Piggin
For some reason the skipIf missing_deps() check fails to skip the test if it comes after the skipUnless lines, causing an error running on systems without xorriso. Avocado implements skipUnless is just an inverted skipIf, so it's not clear what the bug is or why this fixes it. For now it's enough to get things working. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2246 Fixes: c9cb496710758 ("tests/avocado: ppc add hypervisor tests") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
2024-03-29tcg/optimize: Fix sign_mask for logical right-shiftRichard Henderson
The 'sign' computation is attempting to locate the sign bit that has been repeated, so that we can test if that bit is known zero. That computation can be zero if there are no known sign repetitions. Cc: qemu-stable@nongnu.org Fixes: 93a967fbb57 ("tcg/optimize: Propagate sign info for shifting") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-28qtest/virtio-9p-test.c: remove g_test_slow() gateDaniel Henrique Barboza
Commit 558f5c42ef gated the local tests with g_test_slow() to skip them in 'make check'. The reported issue back then was this following CI problem: https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html This problem ended up being fixed after it was detected with the recently added risc-v machine nodes [1]. virtio-9p-test.c is now creating and removing temporary dirs for each test run, instead of creating a single dir for the entire qos-test scope. We're now able to run these tests with 'make check' in the CI, so let's go ahead and re-enable them. This reverts commit 558f5c42efded3e0d0b20a90bce2a9a14580d824. [1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20240327142011.805728-3-dbarboza@ventanamicro.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2024-03-28qtest/virtio-9p-test.c: create/remove temp dirs after each testDaniel Henrique Barboza
The local 9p driver in virtio-9p-test.c its temporary dir right at the start of qos-test (via virtio_9p_create_local_test_dir()) and only deletes it after qos-test is finished (via virtio_9p_remove_local_test_dir()). This means that any qos-test machine that ends up running virtio-9p-test local tests more than once will end up re-using the same temp dir. This is what's happening in [1] after we introduced the riscv machine nodes: if we enable slow tests with the '-m slow' flag using qemu-system-riscv64, this is what happens: - a temp dir is created; - virtio-9p-device tests will run virtio-9p-test successfully; - virtio-9p-pci tests will run virtio-9p-test, and fail right at the first slow test at fs_create_dir() because the "01" file was already created by fs_create_dir() test when running with the virtio-9p-device. The root cause is that we're creating a single temporary dir, via the construct/destruct callbacks, and this temp dir is kept for the entire qos-test run. We can change each test to clean after themselves. This approach would make the 'create' tests obsolete since we would need to create and delete dirs/files/symlinks for the cleanup, turning them into the 'unlinkat' tests that comes right after. We chose a different approach that handles the root cause: do not use constructor/destructor to create the temp dir. Create one temp dir for each test, and remove it after the test is complete. This is the approach taken for other qtests like vhost-user-test.c where each test requires a setup() and a subsequent cleanup(), all of those instantiated in the .before callback. [1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20240327142011.805728-2-dbarboza@ventanamicro.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2024-03-26tests/tcg: Test shmat(NULL)Ilya Leoshkevich
Add a small test to prevent regressions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20240325192436.561154-5-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-03-26iotests: add test for stream job with an unaligned prefetch readFiona Ebner
Previously, bdrv_pad_request() could not deal with a NULL qiov when a read needed to be aligned. During prefetch, a stream job will pass a NULL qiov. Add a test case to cover this scenario. By accident, also covers a previous race during shutdown, where block graph changes during iteration in bdrv_flush_all() could lead to unreferencing the wrong block driver state and an assertion failure later. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240322095009.346989-5-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-26tests/qemu-iotests: Test 157 and 227 require virtio-blkThomas Huth
Tests 157 and 227 use the virtio-blk device, so we have to mark these tests accordingly to be skipped if this devices is not available (e.g. when running the tests with qemu-system-avr only). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240325154737.1305063-1-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-25Merge tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * Fix timeouts in Travis-CI jobs * Mark devices with user_creatable = false that can crash QEMU otherwise * Fix s390x TEST-AND-SET TCG instruction emulation * Move pc955* devices to hw/gpio/ # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98 # 8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy # X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf # ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd # fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG # YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p # 6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb # C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV # MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ # 7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M # KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO # 5jreYdMxWdc= # =lfZM # -----END PGP SIGNATURE----- # gpg: Signature made Mon 25 Mar 2024 14:10:32 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu: tests/tcg/s390x: Test TEST AND SET target/s390x: Use mutable temporary value for op_ts libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kick misc/pca955*: Move models under hw/gpio aspeed: Make the ast1030-a1 SoC not user creatable aspeed: Make the ast2600-a3 SoC not user creatable hw/microblaze: Do not allow xlnx-zynqmp-pmu-soc to be created by the user .travis.yml: Remove the unused xfslib-dev package .travis.yml: Shorten the runtime of the problematic jobs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-25Merge tag 'pull-target-arm-20240325-1' of ↵Peter Maydell
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Fixes for seven minor coverity issues # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmYBh5wZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lb8D/9XDbRFB3kIHVBaDxZyE4bs # QH8u80C08f/PzJ5SQos5D+R07xtPid1dyeiLND/RvwZUN3WAGKf9pmPUQL4aluz5 # gHMalq/+nGNam2qz+tKTI0q0otndiJrGNlOYhw2QqFJ9GUp2T9e61izgw0XeQtzF # GKm6aE8LytH7h2H9ndIpJFQDggqkQev/uZ625hwhYxo0ND5uRqBNE7Wjy104DULo # oEGZBhIB2CtyDiQdxgCfC8TOXVT3NAEbk6carbYdGshrMTpWNsjOHbLVcsuqUaZC # eeRnOprsQq+YE5aAByfipGgCuoGNE5rn6ZTrDpSdfLe8LFfU/hEASnOmIjMtMbSM # HKhKcKKzvLk/KQZZNJCbh+MKl1GsTvXMrB/DjLaVu2643MyQY7XZu3/XX3PE6Zee # WqJC+NazfXCdHDyYqfPELkmnpeS5Tka/PCoku1VNWmnr7Qr6SYIqzbxI+zCsbDCs # uqDfxzwN1lTKCkgUD3SVQrmrQ3u9nTLCpTqmaEd6H3+0UgpEUBpW51bMPUxO3KIk # ouvjVJ3oDSdNMyVrEl3zDoxykU99trRYbIRALrW+rd1ghn4SE0WorAGJ96GLGYP0 # QfFtveTmDqsfKOvxHfBx6gng0aQw0GK145uXLciRaPuX51wZGbAjp/Muhs6oswtR # j7GgfYAbVdc1QwKTqBK0tw== # =0H37 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 25 Mar 2024 14:18:04 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240325-1' of https://git.linaro.org/people/pmaydell/qemu-arm: tests/qtest/libqtest.c: Check for g_setenv() failure tests/unit/test-throttle: Avoid unintended integer division hw/nvram/mac_nvram: Report failure to write data hw/misc/pca9554: Correct error check bounds in get/set pin functions net/af-xdp.c: Don't leak sock_fds array in net_init_af_xdp() tests/unit/socket-helpers: Don't close(-1) tests/qtest/npcm7xx_emc_test: Don't leak cmd_line Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-25tests/qtest/libqtest.c: Check for g_setenv() failurePeter Maydell
Coverity points out that g_setenv() can fail and we don't check for this in qtest_inproc_init(). In practice this will only fail if a memory allocation failed in setenv() or if the caller passed an invalid architecture name (e.g. one with an '=' in it), so rather than requiring the callsite to check for failure, make g_setenv() failure fatal here, similarly to what we did in commit aca68d95c515. Resolves: Coverity CID 1497485 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240312183810.557768-8-peter.maydell@linaro.org
2024-03-25tests/unit/test-throttle: Avoid unintended integer divisionPeter Maydell
In test_compute_wait() we do double units = bkt.max / 10; which does an integer division and then assigns it to a double variable, and similarly later on in the expression for an assertion. Use 10.0 so that we do a floating point division and calculate the exact value, rather than doing an integer division. Spotted by Coverity. Resolves: Coverity CID 1432564 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240312183810.557768-7-peter.maydell@linaro.org
2024-03-25tests/tcg/s390x: Test TEST AND SETIlya Leoshkevich
Add a small test to prevent regressions. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240318202722.20675-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-25libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kickZheyu Ma
In qvirtqueue_kick(), the 'flags' were previously being incorrectly read from vq->avail instead of the correct vq->used location. This update ensures 'flags' are read from the correct location as per the virtio standard. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240320090442.267525-1-zheyuma97@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-25misc/pca955*: Move models under hw/gpioCédric Le Goater
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the PCA9552 also can drive LEDs. Do all the necessary adjustments to move the models under hw/gpio. Cc: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20240325134833.1484265-1-clg@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-25tests/unit/socket-helpers: Don't close(-1)Peter Maydell
In socket_check_afunix_support() we call socket(PF_UNIX, SOCK_STREAM, 0) to see if it works, but we call close() on the result whether it worked or not. Only close the fd if the socket() call succeeded. Spotted by Coverity. Resolves: Coverity CID 1497481 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240312183810.557768-3-peter.maydell@linaro.org
2024-03-25tests/qtest/npcm7xx_emc_test: Don't leak cmd_linePeter Maydell
In test_rx() and test_tx() we allocate a GString *cmd_line but never free it. This is pretty harmless in a test case, but Coverity spotted it. Resolves: Coverity CID 1507122 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240312183810.557768-2-peter.maydell@linaro.org
2024-03-22migration: Revert mapped-ram multifd support to fd: URIFabiano Rosas
This reverts commit decdc76772c453ff1444612e910caa0d45cd8eac in full and also the relevant migration-tests from 7a09f092834641b7a793d50a3a261073bbb404a6. After the addition of the new QAPI-based migration address API in 8.2 we've been converting an "fd:" URI into a SocketAddress, missing the fact that the "fd:" syntax could also be used for a plain file instead of a socket. This is a problem because the SocketAddress is part of the API, so we're effectively asking users to create a "socket" channel to pass in a plain file. The easiest way to fix this situation is to deprecate the usage of both SocketAddress and "fd:" when used with a plain file for migration. Since this has been possible since 8.2, we can wait until 9.1 to deprecate it. For 9.0, however, we should avoid adding further support to migration to a plain file using the old "fd:" syntax or the new SocketAddress API, and instead require the usage of either the old-style "file:" URI or the FileMigrationArgs::filename field of the new API with the "/dev/fdset/NN" syntax, both of which are already supported. Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240319210941.1907-1-farosas@suse.de Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-21Merge tag 'pull-maintainer-final-for-real-this-time-200324-1' of ↵Peter Maydell
https://gitlab.com/stsquad/qemu into staging maintainer updates (gitlab, avocado): - avoid extra git data on gitlab checkouts - update sbsa-ref tests # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmX62tkACgkQ+9DbCVqe # KkSpfQf/Q2Zk6YMuFUmI8ho25svdbXPSNtgtWkwzFcBPgZ1QQxQfuGYBId6KrWHE # ArN33emgOjvFj2lYCq6Re0yE1VzKma7UDshwVl3v4aRT0e7GA4zGROLuOq2mwfK9 # gNJgRzUvoMlJuBf25z68I9AsFL3YPOsPYY+/5tmb4Mo3ZxXuA+UYXpdXIflbBAsH # 7VYhkLMwKMinz7Y/zpfdHge+Mz08BHb8Rs+r8n9tvxNozehIgeJCpDwAeUVsLM7U # ZmQCFHbHgUfQDF9+NmMgms56fEsY08ytUl0KT1hG4w+S9kt1TmuffT09xRynTZwo # TGxsQlZG1AnpX8XV2wLfCi91c347tw== # =+Vql # -----END PGP SIGNATURE----- # gpg: Signature made Wed 20 Mar 2024 12:47:21 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-maintainer-final-for-real-this-time-200324-1' of https://gitlab.com/stsquad/qemu: tests/avocado: sbsa-ref: add OpenBSD tests for misc 'max' setup tests/avocado: sbsa-ref: add Alpine tests for misc 'max' setup tests/avocado: drop virtio-rng from sbsa-ref tests tests/avocado: update sbsa-ref firmware gitlab: aggressively avoid extra GIT data Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-20tests/avocado: sbsa-ref: add OpenBSD tests for misc 'max' setupMarcin Juszkiewicz
PAuth makes run timeout on CI so add tests using 'max' without it and with impdef one. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240318-sbsa-ref-firmware-update-v3-4-1c33b995a538@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-03-20tests/avocado: sbsa-ref: add Alpine tests for misc 'max' setupMarcin Juszkiewicz
PAuth makes run timeout on CI so add tests using 'max' without it and with impdef one. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240318-sbsa-ref-firmware-update-v3-3-1c33b995a538@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-03-20tests/avocado: drop virtio-rng from sbsa-ref testsMarcin Juszkiewicz
sbsa-ref is supposed to emulate real hardware so virtio-rng-pci does not fit here Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Message-Id: <20240318-sbsa-ref-firmware-update-v3-2-1c33b995a538@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-03-20tests/avocado: update sbsa-ref firmwareMarcin Juszkiewicz
We now have CI job to build those and publish in space with readable urls. Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0). Used versions: - Trusted Firmware v2.10.2 - Tianocore EDK2 stable202402 - Tianocore EDK2 Platforms code commit 085c2fb Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240318-sbsa-ref-firmware-update-v3-1-1c33b995a538@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2024-03-19crypto: report which ciphers are being skipped during testsDaniel P. Berrangé
Since the ciphers can be dynamically disabled at runtime, when running unit tests it is helpful to report which ciphers we can skipped for testing. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-03-19crypto: use error_abort for unexpected failuresDaniel P. Berrangé
This improves the error diagnosis from the unit test when a cipher is unexpected not available from ERROR:../tests/unit/test-crypto-cipher.c:683:test_cipher: assertion failed: (err == NULL) Bail out! ERROR:../tests/unit/test-crypto-cipher.c:683:test_cipher: assertion failed: (err == NULL) Aborted (core dumped) to Unexpected error in qcrypto_cipher_ctx_new() at ../crypto/cipher-gcrypt.c.inc:262: ./build//tests/unit/test-crypto-cipher: Cannot initialize cipher: Invalid cipher algorithm Aborted (core dumped) Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-03-19tests: Raise timeouts for bufferiszero and crypto-tlscredsx509Peter Maydell
On our gcov CI job, the bufferiszero and crypto-tlscredsx509 tests time out occasionally, making the job flaky. Double the timeout on these two tests. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2221 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20240312110815.116992-1-peter.maydell@linaro.org
2024-03-19Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: bugfixes Some minor fixes plus a big patchset from Igor fixing a regression with windows. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX4NzsPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpkp0H/1foAaDYrApMiIkji4aI94bq/fwTnu5CshNP # +YEzwJCS4qbl67/Ix2Z+xVz7twjQbgGdLd6hb9ZypAQfclUk5tDoKyCmqHtQMakX # T080FayOvWmUEostAw7MXvuz0HpJlgnJaJBn29l1hHjA/XXahKqcc705cup+W8hv # F7xb6AoFcbdETMzNaoqekNaHiiYyQPITY9p/UYPLzj2zyLsspR9kBebIeA1yhtXw # Tmc3+FMquoM2fMNxpwfhCBswg662MlOXhLN3dmyLqeJRl09x1GvaeJIGMY2MbefM # RMMv0/jqwAyii5HXew2rPIbLdULGq+hSjZo2NOlx3EOjTCaOkXc= # =XGMp # -----END PGP SIGNATURE----- # gpg: Signature made Mon 18 Mar 2024 12:44:43 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (24 commits) smbios: add extra comments to smbios_get_table_legacy() tests: acpi: update expected SSDT.dimmpxm blob pc/q35: set SMBIOS entry point type to 'auto' by default tests: acpi/smbios: whitelist expected blobs smbios: error out when building type 4 table is not possible smbios: in case of entry point is 'auto' try to build v2 tables 1st smbios: extend smbios-entry-point-type with 'auto' value smbios: clear smbios_type4_count before building tables smbios: get rid of global smbios_ep_type smbios: handle errors consistently smbios: build legacy mode code only for 'pc' machine smbios: rename/expose structures/bitmaps used by both legacy and modern code smbios: add smbios_add_usr_blob_size() helper smbios: don't check type4 structures in legacy mode smbios: avoid mangling user provided tables smbios: get rid of smbios_legacy global smbios: get rid of smbios_smp_sockets global smbios: cleanup smbios_get_tables() from legacy handling tests: smbios: add test for legacy mode CLI options tests: smbios: add test for -smbios type=11 option ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-18tests: acpi: update expected SSDT.dimmpxm blobIgor Mammedov
address shift is caused by switch to 32-bit SMBIOS entry point which has slightly different size from 64-bit one and happens to trigger a bit different memory layout. Expected diff: - Name (MEMA, 0x07FFE000) + Name (MEMA, 0x07FFF000) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20240314152302.2324164-21-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-18tests: acpi/smbios: whitelist expected blobsIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20240314152302.2324164-19-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-18tests: smbios: add test for legacy mode CLI optionsIgor Mammedov
Unfortunately having 2.0 machine type deprecated is not enough to get rid of legacy SMBIOS handling since 'isapc' also uses that and it's staying around. Hence add test for CLI options handling to be sure that it ain't broken during SMBIOS code refactoring. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Message-Id: <20240314152302.2324164-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-18tests: smbios: add test for -smbios type=11 optionIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Message-Id: <20240314152302.2324164-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-18tests: smbios: make it possible to write SMBIOS only testIgor Mammedov
Cureently it not possible to run SMBIOS test without ACPI one, which gets into the way when testing ACPI-less configs. Extract SMBIOS testing into separate routines that could also be run without ACPI dependency and use that for testing SMBIOS. As the 1st user add "acpi/piix4/smbios-options" test case. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Message-Id: <20240314152302.2324164-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-18iotests: adapt to output change for recently introduced 'detached header' fieldFiona Ebner
Failure was noticed when running the tests for the qcow2 image format. Fixes: 0bd779e27e ("crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS") Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240216101415.293769-1-f.ebner@proxmox.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict tests using "--blockdev file" to the file protocolThomas Huth
Tests that use "--blockdev" with the "file" driver cannot work with other protocols, so we should mark them accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-10-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Fix some tests that use --image-opts for other protocolsThomas Huth
Tests 263, 284 and detect-zeroes-registered-buf use qemu-io with --image-opts so we have to enforce IMGOPTSSYNTAX=true here to get $TEST_IMG in shape for other protocols than "file". Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-9-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict tests that use --image-opts to the 'file' protocolThomas Huth
These tests 188, 189 and 198 use qemu-io with --image-opts with additional hard-coded parameters for the file protocol, so they cannot work for other protocols. Thus we have to limit these tests to the file protocol only. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-8-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict test 156 to the 'file' protocolThomas Huth
The test fails completely when you try to use it with a different protocol, e.g. with "./check -ssh -qcow2 156". The test uses some hand-crafted JSON statements which cannot work with other protocols, thus let's change this test to only support the 'file' protocol. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-7-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict test 134 and 158 to the 'file' protocolThomas Huth
Commit b25b387fa592 updated the iotests 134 and 158 to use the --image-opts parameter for qemu-io with file protocol related options, but forgot to update the _supported_proto line accordingly. So let's do that now. Fixes: b25b387fa5 ("qcow2: convert QCow2 to use QCryptoBlock for encryption") Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-6-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict test 130 to the 'file' protocolThomas Huth
Using "-drive ...,backing.file.filename=..." only works with the file protocol, but not with URIs, so mark this test accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-5-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict test 114 to the 'file' protocolThomas Huth
iotest 114 uses "truncate" and the qcow2.py script on the destination file, which both cannot deal with URIs. Thus this test needs the "file" protocol, otherwise it fails with an error message like this: truncate: cannot open 'ssh://127.0.0.1/tmp/qemu-build/tests/qemu-iotests/scratch/qcow2-ssh-114/t.qcow2.orig' for writing: No such file or directory Thus mark this test for "file protocol only" accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-4-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Restrict test 066 to the 'file' protocolThomas Huth
The hand-crafted json statement in this test only works if the test is run with the "file" protocol, so mark this test accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-3-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18tests/qemu-iotests: Fix test 033 for running with non-file protocolsThomas Huth
When running iotest 033 with the ssh protocol, it fails with: 033 fail [14:48:31] [14:48:41] 10.2s output mismatch --- /.../tests/qemu-iotests/033.out +++ /.../tests/qemu-iotests/scratch/qcow2-ssh-033/033.out.bad @@ -174,6 +174,7 @@ 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 512/512 bytes at offset 2097152 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +qemu-io: warning: Failed to truncate the tail of the image: ssh driver does not support shrinking files read 512/512 bytes at offset 0 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) We already check for the qcow2 format here, so let's simply also add a check for the protocol here, too, to only test the truncation with the file protocol. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240315111108.153201-2-thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-18qemu-img: Fix Column Width and Improve Formatting in snapshot listAbhiram Tilak
When running the command `qemu-img snapshot -l SNAPSHOT` the output of VM_CLOCK (measures the offset between host and VM clock) cannot to accommodate values in the order of thousands (4-digit). This line [1] hints on the problem. Additionally, the column width for the VM_CLOCK field was reduced from 15 to 13 spaces in commit b39847a5 in line [2], resulting in a shortage of space. [1]: https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L753 [2]: https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L763 This patch restores the column width to 15 spaces and makes adjustments to the affected iotests accordingly. Furthermore, addresses a potential source of confusion by removing whitespace in column headers. Example, VM CLOCK is modified to VM_CLOCK. Additionally a '--' symbol is introduced when ICOUNT returns no output for clarity. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2062 Fixes: b39847a50553 ("migration: introduce icount field for snapshots") Signed-off-by: Abhiram Tilak <atp.exp@gmail.com> Message-ID: <20240123050354.22152-2-atp.exp@gmail.com> [kwolf: Fixed up qemu-iotests 261 and 286] Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 12:45:53 +0000