aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2017-08-10IDE: test flush on empty CDROMKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170809160212.29976-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-09libqtest: always set up signal handler for SIGABRTJens Freimann
Currently abort handlers only work for the first test function in a testcase, because the list of abort handlers is not properly cleared when qtest_quit() is called. qtest_quit() only deletes the kill_qemu_hook but doesn't completely clear the abrt_hooks list. The effect is that abrt_hooks.is_setup is never set to false and in a following test the abrt_hooks list is not initialized and setup_sigabrt_handler() is not called. One way to solve this is to clear the list in qtest_quit(), but that means only asserts between qtest_start and qtest_quit will be catched by the abort handler. We can make abort handlers work in all cases if we always setup the signal handler for SIGABRT in qtest_init. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-09acpi-test: update expected DSDT filesMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-08qemu-iotests: Test reopen between read-only and read-writeKevin Wolf
This serves as a regression test for the bugs that were just fixed for bdrv_reopen() between read-only and read-write mode. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2017-08-08block/null: Remove 'filename' optionKevin Wolf
This option was only added to allow 'null-co://' and 'null-aio://' as filenames, its value never served any actual purpose and was ignored. Nevertheless it was accepted as '-drive driver=null,filename=foo'. The correct way to enable the protocol prefixes (and that without adding a useless -drive option) is implementing .bdrv_parse_filename. This is what this patch does. Technically, this is an incompatible change, but the null block driver is only used for benchmarking, testing and debugging, and an option without effect isn't likely to be used by anyone anyway, so no bad effects are to be expected. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-08qemu-iotests/109: Fix lock race conditionCleber Rosa
A race condition is currently present between the clean up attempt of the QEMU process and the execution of qemu-img. The actual (bad) output is: -Warning: Image size mismatch! -Images are identical. +qemu-img: Could not open '<build_dir>/tests/qemu-iotests/scratch/t.raw': Failed to get "consistent read" lock +Is another process using the image? A KILL signal is sent to the QEMU process, but qemu-img may begin to run before the QEMU process is really gone. qemu-img will then attempt to open the TEST_IMG file before it can secure a lock on it. This attempts a more graceful shutdown, and waits for the QEMU process to exit. Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-03build-sys: add --disable-vhost-userMarc-André Lureau
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it enabled by default on non-win32, that is assumed to be POSIX. Fail if trying to enable it on win32. When trying to make a vhost-user netdev, it gives the following error: -netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type And similar error with the HMP/QMP monitors. While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST since it's a vhost-user specific variable. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-02tests/hmp: Fix typo in the 'chardev-send-break' testThomas Huth
testchardev2 is not a valid chardev id here. Use testchardev1 instead which has been created with chardev-add right before the 'chardev-send-break' line. And while we're at it, add the test-hmp.c file to the MAINTAINERS file, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1501149097-19071-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, acpi, virtio: fixes, test speedup for rc1 Some fixes all over the place. Notably vhost-user gained a new message to set endian-ness. Borderline for 2.10 but seems to be the only way to fix legacy guests. Also pc tests are run on kvm now. Not a fix at all but doesn't touch qemu itself, so I merged it since I had to run these a lot and I just got tired of waiting for these to finish. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 01 Aug 2017 22:36:47 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: pc: acpi: force FADT rev1 for 440fx based machine types pc: make 'pc.rom' readonly when machine has PCI enabled vhost-user: fix watcher need be removed when vhost-user hotplug tests/bios-tables-test: Compiler warning fix accel: cleanup error output intel_iommu: use access_flags for iotlb intel_iommu: fix iova for pt vhost-user: fix legacy cross-endian configurations vhost: fix a memory leak tests: switch pxe and vm gen id tests to use kvm Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-02tests/bios-tables-test: Compiler warning fixDr. David Alan Gilbert
gcc 7.1.1 in fedora 26 moans about the: tables = g_new0(uint32_t, tables_nr) because it can't convince itself that tables_nr is positive. This is fallout from g_assert_cmpint no longer necessarily being no-return; replace it with a plain g_assert. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-08-02tests: switch pxe and vm gen id tests to use kvmMichael S. Tsirkin
Speed up tests on host systems with kvm support. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Xen fix (Anthony) * chardev fixes (Anton, Marc-André) * small dead code removal (Zhongyi) * documentation (Dan) * bugfixes (David) * decrease migration downtime (Jay) * improved error output (Laurent) * RTC tests and bugfix (me) * Bluetooth clang analyzer fix (me) * KVM CPU hotplug race (Peng Hao) * Two other patches from Philippe's clang analyzer series # gpg: Signature made Tue 01 Aug 2017 16:56:21 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: mc146818rtc: implement UIP latching as intended mc146818rtc: simplify check_update_timer rtc-test: introduce more update tests rtc-test: cleanup register_b_set_flag test hw/scsi/vmw_pvscsi: Convert to realize hw/scsi/vmw_pvscsi: Remove the dead error handling migration: optimize the downtime qemu-options: document existance of versioned machine types bt: stop the sdp memory allocation craziness exec: Add lock parameter to qemu_ram_ptr_length target-i386: kvm_get/put_vcpu_events don't handle sipi_vector docs: document deprecation policy & deprecated features in appendix char: don't exit on hmp 'chardev-add help' char-fd: remove useless chr pointer accel: cleanup error output cpu_physical_memory_sync_dirty_bitmap: Fix alignment check vl.c/exit: pause cpus before closing block devices Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-01qemu-iotests/059: Fix leaked image filesKevin Wolf
qemu-iotests 059 left a whole lot of image files behind in the scratch directory because VMDK creates additional files for extents and cleaning them up requires the original image intact (it parses qemu-img info output to find all extent files), but the image overwrote it many times like it works for all other image formats. In addition, _use_sample_img overwrites the TEST_IMG variable, causing new images created afterwards to reuse the name of the sample file rather than the usual t.IMGFMT. This patch adds an intermediate _cleanup_test_img after each subtest that created an image file with additional extent files, and also after each use of a sample image. _cleanup_test_img is also changed so that it resets TEST_IMG after a sample image is cleaned up. Note that this test was failing before this commit and continues to do so after it. This failure was introduced in commit 9877860 ('block/vmdk: Report failures in vmdk_read_cid()') and needs to be dealt with separately. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/063: Fix leaked imageKevin Wolf
qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because it used the wrong suffix. Make sure to clean it up after completing the test. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/162: Fix leaked temporary filesKevin Wolf
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and potentially a file called '42' in the current directory. Make sure to clean it up after completing the tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/153: Fix leaked scratch imagesKevin Wolf
qemu-iotests 153 left t.qcow2.c behind in the scratch directory. Make sure to clean it up after completing the tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/141: Fix image cleanupKevin Wolf
qemu-iotests 141 attempted to use brace expansion to remove all images with a single command. However, for this to work, the braces shouldn't be quoted. With this fix, the tests correctly cleans up its scratch images. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests: Remove blkdebug.conf after testsKevin Wolf
qemu-iotests 074 and 179 left a blkdebug.conf behind in the scratch directory. Make sure to clean up after completing the tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01qemu-iotests/041: Fix leaked scratch imagesKevin Wolf
qemu-iotests 041 left quorum_snapshot.img and target.img behind in the scratch directory. Make sure to clean up after completing the tests. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-08-01iotests: Add test of recent fix to 'qemu-img measure'Eric Blake
The new test 190 ensures we don't regress back to an infinite loop when measuring the size of a 2T+ qcow2 image. I did not append to test 178, because that test is also designed to run with format 'raw'; also, this gives us some coverage of the measure command under the quick group. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-01iotests: Check dirty bitmap statistics in 124Eric Blake
We had a bug for multiple releases where dirty-bitmap count was documented in bytes but reported in sectors; enhance the testsuite to add coverage of DirtyBitmapInfo to ensure we do not regress again. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-01iotests: Redirect stderr to stdout in 186Max Reitz
Without redirecting qemu's stderr to stdout, _filter_qemu will not apply to warnings. This results in $QEMU_PROG not being replaced by QEMU_PROG which is not great if your qemu executable is not called qemu-system-x86_64 (e.g. qemu-system-i386). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-01iotests: Fix test 156Max Reitz
On one hand, the _make_test_img invocation for creating the target image was missing a -u because its backing file is not supposed to exist at that point. On the other hand, nobody noticed probably because the backing file is created later on and _cleanup failed to remove it: The quotation marks were misplaced so bash tried to delete a file literally called "$TEST_IMG{,.target}..." instead of performing brace expansion. Thus, the files stayed around after the first run and qemu-img create did not complain about a missing backing file on any run but the first. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-08-01rtc-test: introduce more update testsPaolo Bonzini
Test divider reset and UIP behavior. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01rtc-test: cleanup register_b_set_flag testPaolo Bonzini
Introduce set_datetime_bcd/assert_datetime_bcd, and handle UIP correctly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-31tests: add missing dependency to build QTEST_QEMU_BINARYPhilippe Mathieu-Daudé
This allow a one liner from fresh repository clone, i.e.: ./configure && make -j check-qtest-aarch64 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31tests: test-netfilter && pxe-test require slirpMarc-André Lureau
If slirp is disabled, it will fail with: qemu-system-x86_64: -netdev user,id=qtest-bn0: Parameter 'type' expects a netdev backend type Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-31tests: check-qom-proplist: fix leakMarc-André Lureau
user_creatable_add_opts() returns a reference (the other reference is for the root parent/child link). Leak introduced in commit a1af255f065cc. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-25qemu-iotests: Fix reference output for 186Kevin Wolf
Commits 70f17a1 ('error: Revert unwanted change of warning messages') and e1824e5 ('qemu-iotests: Test 'info block'') had a semantic merge conflict, which results in failure for qemu-iotests case 186. Fix the reference output to consider the changes of 70f17a1. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1500973176-29235-1-git-send-email-kwolf@redhat.com Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-24Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches for 2.10.0-rc0 # gpg: Signature made Mon 24 Jul 2017 15:16:42 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: qemu-iotests: Avoid unnecessary sleeps block: Skip implicit nodes in query-block/blockstats qcow2: Fix sector calculation in qcow2_measure() dirty-bitmap: Report BlockDirtyInfo.count in bytes, as documented iotests: Remove a few tests from 'quick' group Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-24qemu-iotests: Avoid unnecessary sleepsKevin Wolf
Test cases 030, 041 and 055 used to sleep for a second after calling block-job-pause to make sure that the block job had time to actually get into paused state. We can instead poll its status and use that one second only as a timeout. The tests also slept a second for checking that the block jobs don't make progress while being paused. Half a second is more than enough for this. These changes reduce the total time for the three tests by 25 seconds on my laptop (from 155 seconds to 130). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24block: Skip implicit nodes in query-block/blockstatsKevin Wolf
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter nodes above the top layer of mirror and commit block jobs. The assumption made there was that since libvirt doesn't do node-level management of the block layer yet, it shouldn't be affected by added nodes. This is true as far as commands issued by libvirt are concerned. It only uses BlockBackend names to address nodes, so any operations it performs still operate on the root of the tree as intended. However, the assumption breaks down when you consider query commands, which return data for the wrong node now. These commands also return information on some child nodes (bs->file and/or bs->backing), which libvirt does make use of, and which refer to the wrong nodes, too. One of the consequences is that oVirt gets wrong information about the image size and stops the VM in response as long as a mirror or commit job is running: https://bugzilla.redhat.com/show_bug.cgi?id=1470634 This patch fixes the problem by hiding the implicit nodes created automatically by the mirror and commit block jobs in the output of query-block and BlockBackend-based query-blockstats as long as the user doesn't indicate that they are aware of those nodes by providing a node name for them in the QMP command to start the block job. The node-based commands query-named-block-nodes and query-blockstats with query-nodes=true still show all nodes, including implicit ones. This ensures that users that are capable of node-level management can still access the full information; users that only know BlockBackends won't use these commands. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2017-07-24iotests: Remove a few tests from 'quick' groupEric Blake
A run of './check -qcow2 -g quick' on my machine produced only two tests that took longer than 5 seconds; 178 took 18, and 189 took 7. Remove them from the quick group. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-24block: Use JSON null instead of "" to disable backing fileMarkus Armbruster
BlockdevRef is an alternate of BlockdevOptions (inline definition) and str (reference to an existing block device by name). BlockdevRef value "" is special: "no block device should be referenced." It's actually interpreted that way in just one place: optional member @backing of COW formats. Semantics: * Present means "use this block device" as backing storage * Absent means "default to the one stored in the image" * Except "" means "don't use backing storage at all" The first two are perfectly normal: when the parameter is absent, it defaults to an implied value, but the value's meaning is the same. The third one overloads the parameter with a second meaning. The overloading is *implicit*, i.e. it's not visible in the types. Works here, because "" is not a value block device ID. Pressing argument values the schema accepts, but are semantically invalid, into service to mean "do something else entirely" is not general, as suitable invalid values need not exist. I also find it ugly. To clean this up, we could add a separate flag argument to suppress @backing, or add a distinct value to @backing. This commit implements the latter: add JSON null to the values of @backing, deprecate "". Because we're so close to the 2.10 freeze, implement it in the stupidest way possible: have qmp_blockdev_add() rewrite null to "" before anything else can see the null. Works, because BlockdevRef occurs only within arguments of blockdev-add. The proper way to do it would be rewriting "" to null, preferably in a cleaner way, but that requires fixing up code to work with null. Add a TODO comment for that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24tests/test-qobject-input-visitor: Drop redundant testMarkus Armbruster
test_visitor_in_alternate() tests UserDefAlternate with inadmissible input. test_visitor_in_fail_alternate() does basically the same. Drop the former, keep the latter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-24qapi: Introduce a first class 'null' typeMarkus Armbruster
I expect the 'null' type to be useful mostly for members of alternate types. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-24qapi: Use QNull for a more regular visit_type_null()Markus Armbruster
Make visit_type_null() take an @obj argument like its buddies. This helps keep the next commit simple. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-24qapi: Separate type QNull from QObjectMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-21Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2' into staging Final CI updates for soft-freeze Tweaks from Paolo for J=x Travis compiles Bunch of updated cross-compile targets from Philippe Additional debug tools in travis image from Me # gpg: Signature made Tue 18 Jul 2017 11:00:26 BST # gpg: using RSA key 0xFBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2: (32 commits) docker: install clang since Shippable setup_ve() verify it is available docker: warn users to use newer debian8/debian9 base image docker: add debian Ports base image shippable: add win32/64 targets docker: add MXE (M cross environment) base image for MinGW-w64 shippable: add mips64el targets docker: add debian/mips64el image shippable: use debian/mips[eb] targets docker: add debian/mips[eb] images shippable: add powerpc target docker: add debian/powerpc based on Jessie docker: add 'apt-fake' script which generate fake debian packages docker: add qemu:debian-jessie based on outdated jessie release shippable: add x86_64 targets shippable: add ppc64el targets shippable: add armel targets docker: enable nettle to extend code coverage on arm64 docker: enable gcrypt to extend code coverage on amd64 docker: enable netmap to extend code coverage on amd64 docker: enable virgl to extend code coverage on amd64 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20tests: Handle $RANDOM not being supported by the shellPeter Maydell
In various places in our test makefiles and scripts we use the shell $RANDOM to create a random number. This is a bash specific extension, and doesn't work on other shells. With dash the shell doesn't complain, it just effectively always evaluates $RANDOM to 0: echo $((RANDOM + 32768)) => 32768 However, on NetBSD the shell will complain: "-sh: arith: syntax error: "RANDOM + 32768" which means that "make check" fails. Switch to using "${RANDOM:-0}" instead of $RANDOM, which will portably either give us a random number or zero. This means that on non-bash shells we don't get such good test coverage via the MALLOC_PERTURB_ setting, but we were already in that situation for non-bash shells. Our only other uses of $RANDOM (in tests/qemu-iotests/check and tests/qemu-iotests/162) are in shell scripts which use a #!/bin/bash line so they are always run under bash. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1500029117-6387-1-git-send-email-peter.maydell@linaro.org
2017-07-20configure: Use an explicit CONFIG_IVSHMEM rather than CONFIG_EVENTFDKamil Rytarowski
Rather than relying on everywhere that cares about whether the host supports ivshmem using CONFIG_EVENTFD, make configure set an explicit CONFIG_IVSHMEM. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch, add commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20Replace 'struct ucontext' with 'ucontext_t' typeKhem Raj
glibc used to have: typedef struct ucontext { ... } ucontext_t; glibc now has: typedef struct ucontext_t { ... } ucontext_t; (See https://sourceware.org/bugzilla/show_bug.cgi?id=21457 for detail and rationale for the glibc change) However, QEMU used "struct ucontext" in declarations. This is a private name and compatibility cannot be guaranteed. Switch to only using the standardized type name. Signed-off-by: Khem Raj <raj.khem@gmail.com> Message-id: 20170628204452.41230-1-raj.khem@gmail.com Cc: Kamil Rytarowski <kamil@netbsd.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Laurent Vivier <laurent@vivier.eu> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [PMM: Rewrote commit message, based mostly on the one from Nathaniel McCallum] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/pull-qcrypto-2017-07-18-2' into staging Merge qcrypto 2017/07/18 v2 # gpg: Signature made Wed 19 Jul 2017 10:11:21 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qcrypto-2017-07-18-2: tests: crypto: add hmac speed benchmark support tests: crypto: add hash speed benchmark support tests: crypto: add cipher speed benchmark support crypto: hmac: add af_alg-backend hmac support crypto: hash: add afalg-backend hash support crypto: cipher: add afalg-backend cipher support crypto: introduce some common functions for af_alg backend crypto: hmac: add hmac driver framework crypto: hmac: introduce qcrypto_hmac_ctx_new for glib-backend crypto: hmac: introduce qcrypto_hmac_ctx_new for nettle-backend crypto: hmac: introduce qcrypto_hmac_ctx_new for gcrypt-backend crypto: hmac: move crypto/hmac.h into include/crypto/ crypto: hash: add hash driver framework crypto: cipher: add cipher driver framework crypto: cipher: introduce qcrypto_cipher_ctx_new for builtin-backend crypto: cipher: introduce qcrypto_cipher_ctx_new for nettle-backend crypto: cipher: introduce qcrypto_cipher_ctx_new for gcrypt-backend crypto: cipher: introduce context free function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Tue 18 Jul 2017 17:11:07 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: tests/ahci-test: Be mean with RAM ahci: split public and private interface ahci: Isolate public AHCI interface ahci: add ahci_get_num_ports Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Tue 18 Jul 2017 14:29:59 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (21 commits) qemu-img: Check for backing image if specified during create blockdev: move BDRV_O_NO_BACKING option forward block/vvfat: Fix compiler warning with gcc 7 vvfat: initialize memory after allocating it vvfat: correctly parse non-ASCII short and long file names vvfat: add a constant for bootsector name vvfat: add constants for special values of name[0] qemu-iotests: Test unplug of -device without drive qemu-iotests: Test 'info block' scsi-disk: bdrv_attach_dev() for empty CD-ROM ide: bdrv_attach_dev() for empty CD-ROM block: List anonymous device BBs in query-block block/qapi: Use blk_all_next() for query-block block: Make blk_all_next() public block/qapi: Add qdev device name to query-block block: Make blk_get_attached_dev_id() public block/vpc.c: Handle write failures in get_image_offset() block/vmdk: Report failures in vmdk_read_cid() block: remove timer canceling in throttle_config() block: add clock_type field to ThrottleGroup ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19tests: crypto: add hmac speed benchmark supportLongpeng(Mike)
This patch add a hmac speed benchmark, it helps us to measure the performance by using "make check-speed" or using "./tests/benchmark-crypto-hmac" directly. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-19tests: crypto: add hash speed benchmark supportLongpeng(Mike)
This patch add a hash speed benchmark, it helps us to measure the performance by using "make check-speed" or using "./tests/benchmark-crypto-hash" directly. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-19tests: crypto: add cipher speed benchmark supportLongpeng(Mike)
Now we have two qcrypto backends, libiary-backend and afalg-backend, but which one is faster? This patch add a cipher speed benchmark, it helps us to measure the performance by using "make check-speed" or using "./tests/benchmark-crypto-cipher" directly. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-18Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-07-17' into ↵Peter Maydell
staging nbd patches for 2017-07-17 - Eric Blake: nbd: Fix iotests failure due to changed client error message - Eric Blake: [0/2] NBD fixes before softfreeze # gpg: Signature made Mon 17 Jul 2017 23:12:20 BST # gpg: using RSA key 0xA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2017-07-17: nbd: Fix server reply to NBD_OPT_EXPORT_NAME of older clients nbd: Trace client command being sent nbd: Fix iotests failure due to changed client error message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-18tests/ahci-test: Be mean with RAMDr. David Alan Gilbert
The migration tests used two VMs each with -m 1024 this caused problems when run in some small, pessimistic test VMs (netbsd). We can just be meaner with the amount of RAM in the test and use -m 384 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20170714152820.24034-1-dgilbert@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-10 14:25:55 +0000