aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2016-05-12Allow users to specify the vmdk virtual hardware version.Janne Karhunen
Vmdk images have metadata to indicate the vmware virtual hardware version image was created/tested to run with. Allow users to specify that version via new 'hwversion' option. [ kwolf: Adjust qemu-iotests common.filter ] Signed-off-by: Janne Karhunen <Janne.Karhunen@gmail.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-20iotests: Test case for drive-mirror with unaligned image sizeFam Zheng
This is the regression test for the virtual size mismatch issue between target and source images. [ kwolf: Added test_unaligned_with_update ] Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2016-04-20iotests: Add iotests.image_sizeFam Zheng
This retrieves the virtual size of the image out of qemu-img info. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-20mirror: Don't extend the last sub-chunkFam Zheng
The last sub-chunk is rounded up to the copy granularity in the target image, resulting in a larger size than the source. Add a function to clip the copied sectors to the end. This undoes the "wrong" changes to tests/qemu-iotests/109.out in e5b43573e28. The remaining two offset changes are okay. [ kwolf: Use DIV_ROUND_UP to calculate nb_chunks now ] Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2016-04-19qemu-ga: do not run qga test when guest agent disabledYang Hongyang
When configure with --disable-guest-agent, make check will fail with: ERROR:tests/test-qga.c:74:fixture_setup: assertion failed (error == NULL): Failed to execute child process "/home/xx/qemu/qemu-ga" (No such file or directory) (g-exec-error-quark, 8) make: *** [check-tests/test-qga] Error 1 This check was commented out by bab47d9a75a. I think that was by mistake, because the commit message of that commit didn't mention this change. Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org
2016-04-15qemu-iotests: 041: More robust assertion on quorum nodeFam Zheng
Block nodes are now assigned names automatically, therefore the test case is fragile in using fixed indices in result. Introduce a method in iotests.py and do the matching more sensibly. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1460518995-1338-1-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15qemu-iotests: place valgrind log file in scratch dirSascha Silbe
Do not place the valgrind log file at a predictable path in a world-writable location. Use the common scratch directory (${TEST_DIR}) instead. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1460472980-26319-5-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15qemu-iotests: tests: do not set unused tmp variableSascha Silbe
The previous commit removed the last usage of ${tmp} inside the tests themselves; the only remaining users are sourced by check. So we can now drop this variable from the tests. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1460472980-26319-4-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15qemu-iotests: common.rc: drop unused _do()Sascha Silbe
_do() was never used and possibly creates temporary files at predictable, world-writable locations. Get rid of it. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1460472980-26319-3-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15qemu-iotests: drop unused _within_tolerance() filterSascha Silbe
_within_tolerance() isn't used anymore and possibly creates temporary files at predictable, world-writable locations. Get rid of it. If it's needed again in the future it can be revived easily and fixed up to use TEST_DIR and / or safely created temporary files. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1460472980-26319-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-15block: Fix blk_aio_write_zeroes()Kevin Wolf
Commit 57d6a428 broke blk_aio_write_zeroes() because in some write functions in the call path don't have an explicit length argument but reuse qiov->size instead. Which is great, except that write_zeroes doesn't have a qiov, which this commit interprets as 0 bytes. Consequently, blk_aio_write_zeroes() didn't effectively do anything. This patch introduces an explicit acb->bytes in BlkAioEmAIOCB and uses that instead of acb->rwco.size. The synchronous version of the function is okay because it does pass a qiov (with the right size and a NULL pointer as its base). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: iotests.py: get rid of __all__Sascha Silbe
The __all__ list contained a typo for as long as the iotests module existed. That typo prevented "from iotests import *" (which is the only case where iotests.__all__ is used at all) from ever working. The names used by iotests are highly prone to name collisions, so importing them all unconditionally is a bad idea anyway. Since __all__ is not adding any value, let's just get rid of it. Fixes: f345cfd0 ("qemu-iotests: add iotests Python module") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-8-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: 068: don't require KVMSascha Silbe
None of the other test cases explicitly enable KVM and there's no obvious reason for 068 to require it. Drop this so all test cases can be executed in environments where KVM is not available (e.g. because the user doesn't have sufficient permissions to access /dev/kvm). Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-6-git-send-email-silbe@linux.vnet.ibm.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: 148: properly skip test if quorum support is missingSascha Silbe
qemu-iotests test case 148 already had some code for skipping the test if quorum support is missing, but it didn't work in all cases. TestQuorumEvents.setUp() gets run before the actual test class (which contains the skipping code) and tries to start qemu with a drive using the quorum driver. For some reason this works fine when using qcow2, but fails for raw. As the entire test case requires quorum, just check for availability before even starting the test suite. Introduce a verify_quorum() function in iotests.py for this purpose so future test cases can make use of it. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-5-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: iotests.VM: remove qtest socket on errorSascha Silbe
On error, VM.launch() cleaned up the monitor unix socket, but left the qtest unix socket behind. This caused the remaining sub-tests to fail with EADDRINUSE: +====================================================================== +ERROR: testQuorum (__main__.TestFifoQuorumEvents) +---------------------------------------------------------------------- +Traceback (most recent call last): + File "148", line 63, in setUp + self.vm.launch() + File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 247, in launch + self._qmp.accept() + File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 141, in accept + return self.__negotiate_capabilities() + File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 57, in __negotiate_capabilities + raise QMPConnectError +QMPConnectError + +====================================================================== +ERROR: testQuorum (__main__.TestQuorumEvents) +---------------------------------------------------------------------- +Traceback (most recent call last): + File "148", line 63, in setUp + self.vm.launch() + File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 244, in launch + self._qtest = qtest.QEMUQtestProtocol(self._qtest_path, server=True) + File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 33, in __init__ + self._sock.bind(self._address) + File "/usr/lib64/python2.7/socket.py", line 224, in meth + return getattr(self._sock,name)(*args) +error: [Errno 98] Address already in use Fix this by cleaning up both the monitor socket and the qtest socket iff they exist. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-4-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: fix 051 on non-PC architecturesSascha Silbe
Commit 61de4c68 [block: Remove BDRV_O_CACHE_WB] updated the reference output for PCs, but neglected to do the same for the generic reference output file. Fix 051 on all non-PC architectures by applying the same change to the generic output file. Fixes: 61de4c68 ("block: Remove BDRV_O_CACHE_WB") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-3-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12qemu-iotests: check: don't place files with predictable names in /tmpSascha Silbe
Placing files with predictable or even hard-coded names in /tmp is a security risk and can prevent or disturb operation on a multi-user machine. Place them inside the "scratch" directory instead, as we already do for most other test-related files. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com> Message-id: 1459848109-29756-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-12iotests: Make 150 use qemu-img map instead of duMax Reitz
The actual on-disk size of a file does not only depend on factors qemu can control. Thus, we should not depend on this to determine whether a file has indeed been fully allocated. Instead, use qemu-img map and hope that if an area is referenced, it is indeed allocated, too. Also, limit the supported image formats to raw and qcow2 because the actual qemu-img map output may depend on the image format. Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-12iotests: fix the broken 026.nocache outputPavel Butsykin
This patch fixes longstanding issue with 026 iotest. Unfortunately, this test contains 2 versions of the correct output, one for cached writes and one for non-cached ones. People tends to fix only one version of output of the test and thus noncached version becomes broken. Unfortunately, it is default in tests/check-block.sh The following problematic commits were made: commit 3b5e14c76a6bb142bf250ddf99e24a0ac8c7bc12 Author: Max Reitz <mreitz@redhat.com> Date: Tue Dec 2 18:32:51 2014 +0100 qcow2: Flushing the caches in qcow2_close may fail commit a069e2f1372a0a823ab506fc019852a2a652aa54 Author: John Snow <jsnow@redhat.com> Date: Fri Feb 6 16:26:17 2015 -0500 blkdebug: fix "once" rule commit b106ad9185f35fc4ad669555ad0e79e276083bd7 Author: Kevin Wolf <kwolf@redhat.com> Date: Fri Mar 28 18:06:31 2014 +0100 qcow2: Don't rely on free_cluster_index in alloc_refcount_block() Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Max Reitz <mreitz@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, virtio, acpi: fixes for 2.6 Fixes all over the place. Most notably, fixes migration for systems with pci express bridges, and random crashes observed with virtio blk and scsi dataplane. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 08 Apr 2016 08:53:46 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: hw/pci-bridge: Add missing unref in case register-bus fails virtio: merge virtio_queue_aio_set_host_notifier_handler with virtio_queue_set_aio virtio-scsi: use aio handler for data plane virtio-blk: use aio handler for data plane virtio: add aio handler virtio-scsi: fix disabled mode virtio-blk: fix disabled mode virtio: make virtio_queue_notify_vq static tests/bios-tables-test: fix assert virtio-balloon: reset the statistic timer to load device Migration: Add i82801b11 migration data Sort the fw_cfg file list xen: piix reuse pci generic class init function pci-testdev: fast mmio support acpi: Add missing GCC_FMT_ATTR Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-08tests: ignore test-loggingChanglong Xie
Commit 3514552e added a new test, but did not mark it for exclusion in .gitignore. Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1459903756-30672-1-git-send-email-xiecl.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-07tests/bios-tables-test: fix assertMarcel Apfelbaum
Newer iasl does not add the aml file name to the Definition Block. See acpica tools commit 1ecbb3d5: "Emit the AMLFilename as a zero-length string. Allows the compiler to create the name later -- making it easier to rename the parent ASL (DSL) file." That causes an assert in acpi tests: tests/bios-tables-test.c:455:normalize_asl: assertion failed: (block_name) Fix it by striping the start of the definition block line until the first comma. The block name is always the first parameter and the grammar does not allow comma in between, so it is safe. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07Sort the fw_cfg file listGerd Hoffmann
Entries are inserted in filename order instead of being appended to the end in case sorting is enabled. This will avoid any future issues of moving the file creation around, it doesn't matter what order they are created now, the will always be in filename order. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Added machine type handling for compatibility. This was a fairly complex change, this will preserve the order of fw_cfg for older versions no matter what order the firmware files actually come in. A list is kept of the correct legacy order and the entries will be inserted based upon their order in the list. Except that some entries are ordered (in a specific area of the list) based upon what order they appear on the command line. Special handling is added for those entries. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-05Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches for 2.6 # gpg: Signature made Tue 05 Apr 2016 16:32:25 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: crypto: Avoid memory leak on failure qemu-iotests: 149: Use "/usr/bin/env python" block: Forbid I/O throttling on nodes with multiple parents for 2.6 block: forbid x-blockdev-del from acting on DriveInfo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05qemu-iotests: 149: Use "/usr/bin/env python"Fam Zheng
Do the same as other scripts, to pick the correct interpreter between python2 and python3 from the environment. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1459504593-2692-1-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-04-05Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/pull-qcrypto-2016-04-05-1' into staging Merge QCrypto fixes 2016/04/05 v1 # gpg: Signature made Tue 05 Apr 2016 10:53:59 BST using RSA key ID 15104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" * remotes/berrange/tags/pull-qcrypto-2016-04-05-1: crypto: fix nettle config check for running pbkdf test crypto: fix typo in docs for secret object type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-05crypto: fix nettle config check for running pbkdf testDaniel P. Berrange
The pbkdf test is being built based on a check for CONFIG_NETTLE. As of fff2f982ab6ac0dd2b641d30303f72270a019f28, it should be instead checking CONFIG_NETTLE_KDF Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Tested-by: Bruce Rogers <brogers@suse.com> Tested-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-04-05util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPEDDaniel P. Berrange
The FreeBSD header files define the AI_V4MAPPED but its implementation of getaddrinfo() always returns an error when that flag is set. eg address resolution failed for localhost:9000: Invalid value for ai_flags There are also reports of the same problem on OS-X 10.6 Since AI_V4MAPPED is not critical functionality, if we get an EAI_BADFLAGS error then just retry without the AI_V4MAPPED flag set. Use a static var to cache this status so we don't have to retry on every single call. Also remove its use from the test suite since it serves no useful purpose there. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-30Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Wed 30 Mar 2016 11:57:54 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (48 commits) iotests: Test qemu-img convert -S 0 behavior block/null-{co,aio}: Implement get_block_status() block/null-{co,aio}: Allow reading zeroes qemu-img: Fix preallocation with -S 0 for convert block: Remove bdrv_(set_)enable_write_cache() block: Remove BDRV_O_CACHE_WB block: Remove bdrv_parse_cache_flags() qemu-io: Use bdrv_parse_cache_mode() in reopen_f() block: Use bdrv_parse_cache_mode() in drive_init() raw: Support BDRV_REQ_FUA nbd: Support BDRV_REQ_FUA iscsi: Support BDRV_REQ_FUA block: Introduce bdrv_co_writev_flags() block/qapi: Use blk_enable_write_cache() block: Move enable_write_cache to BB level block: Handle flush error in bdrv_pwrite_sync() block: Always set writeback mode in blk_new_open() block: blockdev_init(): Call blk_set_enable_write_cache() explicitly xen_disk: Call blk_set_enable_write_cache() explicitly qemu-img: Call blk_set_enable_write_cache() explicitly ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30iotests: Test qemu-img convert -S 0 behaviorMax Reitz
Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30qemu-img: Fix preallocation with -S 0 for convertMax Reitz
When passing -S 0 to qemu-img convert, the target image is supposed to be fully allocated. Right now, this is not the case if the source image contains areas which bdrv_get_block_status() reports as being zero. This patch changes a zeroed area's status from BLK_ZERO to BLK_DATA before invoking convert_write() if -S 0 has been specified. In addition, the check whether convert_read() actually needs to do anything (basically only if the current area is a BLK_DATA area) is pulled out of that function to the caller. If -S 0 has been specified, zeroed areas need to be written as data to the output, thus they then have to be accounted when calculating the progress made. This patch changes the reference output for iotest 122; contrary to what it assumed, -S 0 really should allocate everything in the output, not just areas that are filled with zeros (as opposed to being zeroed). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Remove BDRV_O_CACHE_WBKevin Wolf
The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-io: Use bdrv_parse_cache_mode() in reopen_f()Kevin Wolf
We must forbid changing the WCE flag in bdrv_reopen() in the same patch, as otherwise the behaviour would change so that the flag takes precedence over the explicitly specified option. The correct value of the WCE flag depends on the BlockBackend user (e.g. guest device) and isn't a decision that the QMP client makes, so this change is what we want. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block/qapi: Use blk_enable_write_cache()Kevin Wolf
Now that WCE is handled on the BlockBackend level, the flag is meaningless for BDSes. As the schema requires us to fill the field, we return an enabled write cache for them. Note that this means that querying the BlockBackend name may return writethrough as the cache information, whereas querying the node-name of the root of that same BlockBackend will return writeback. This may appear odd at first, but it actually makes sense because it correctly repesents the layer that implements the WCE handling. This becomes more apparent when you consider nodes that are the root node of multiple BlockBackends, where each BB can have its own WCE setting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Move enable_write_cache to BB levelKevin Wolf
Whether a write cache is used or not is a decision that concerns the user (e.g. the guest device) rather than the backend. It was already logically part of the BB level as bdrv_move_feature_fields() always kept it on top of the BDS tree; with this patch, the core of it (the actual flag and the additional flushes) is also implemented there. Direct callers of bdrv_open() must pass BDRV_O_CACHE_WB now if bs doesn't have a BlockBackend attached. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: an interoperability test for luks vs dm-crypt/cryptsetupDaniel P. Berrange
It is important that the QEMU luks implementation retains 100% compatibility with the reference implementation provided by the combination of the linux kernel dm-crypt module and cryptsetup userspace tools. There is a matrix of tests to be performed with different sets of encryption settings. For each matrix entry, two tests will be performed. One will create a LUKS image with the cryptsetup tool and then do I/O with both cryptsetup & qemu-io. The other will create the image with qemu-img and then again do I/O with both cryptsetup and qemu-io. The new I/O test 149 performs interoperability testing between QEMU and the reference implementation. Such testing inherantly requires elevated privileges, so to this this the user must have configured passwordless sudo access. The test will automatically skip if sudo is not available. The test has to be run explicitly thus: cd tests/qemu-iotests ./check -luks 149 Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: move encryption deprecation warning into qcow codeDaniel P. Berrange
For a couple of releases we have been warning Encrypted images are deprecated Support for them will be removed in a future release. You can use 'qemu-img convert' to convert your image to an unencrypted one. This warning was issued by system emulators, qemu-img, qemu-nbd and qemu-io. Such a broad warning was issued because the original intention was to rip out all the code for dealing with encryption inside the QEMU block layer APIs. The new block encryption framework used for the LUKS driver does not rely on the unloved block layer API for encryption keys, instead using the QOM 'secret' object type. It is thus no longer appropriate to warn about encryption unconditionally. When the qcow/qcow2 drivers are converted to use the new encryption framework too, it will be practical to keep AES-CBC support present for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability with older QEMU versions and liberation of data from existing encrypted qcow2 files. This change moves the warning out of the generic block code and into the qcow/qcow2 drivers. Further, the warning is set to only appear when running the system emulators, since qemu-img, qemu-io, qemu-nbd are expected to support qcow2 encryption long term now that the maint burden has been eliminated. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: add output filter to python I/O tests helperDaniel P. Berrange
Add a 'log' method to iotests.py which prints messages to stdout, with optional filtering of data. Port over some standard filters already present in the shell common.filter code to be usable in python too. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: refactor python I/O tests helper main methodDaniel P. Berrange
The iotests.py helper provides a main() method for running tests via the python unit test framework. Not all tests will want to use this, so refactor it to split the testing of compatible formats and platforms into separate helper methods Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: redirect stderr to stdout for iotestsDaniel P. Berrange
The python I/O tests helper for running qemu-img/qemu-io setup stdout to be captured to a pipe, but left stderr untouched. As a result, if something failed in qemu-img/ qemu-io, data written to stderr would get output directly and not line up with data on the test stdout due to buffering. If we explicitly redirect stderr to the same pipe as stdout, things are much clearer when they go wrong. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Reject writethrough mode except at the rootKevin Wolf
Writethrough mode is going to become a BlockBackend feature rather than a BDS one, so forbid it in places where we won't be able to support it when the code finally matches the envisioned design. We only allowed setting the cache mode of non-root nodes after the 2.5 release, so we're still free to make this change. The target of block jobs is now always opened in a writeback mode because it doesn't have a BlockBackend attached. This makes more sense anyway because block jobs know when to flush. If the graph is modified on job completion, the original cache mode moves to the new root, so for the guest device writethough always stays enabled if it was configured this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-30block: Make backing files always writebackKevin Wolf
First of all, we're generally not writing to backing files, but when we do, it's in the context of block jobs which know very well when to flush the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-30tests/test-filter-redirector: Add unit test for filter-redirectorZhang Chen
In this unit test,we will test the filter redirector function. Case 1, tx traffic flow: qemu side | test side | +---------+ | +-------+ | backend <---------------+ sock0 | +----+----+ | +-------+ | | +----v----+ +-------+ | | rd0 +->+chardev| | +---------+ +---+---+ | | | +---------+ | | | rd1 <------+ | +----+----+ | | | +----v----+ | +-------+ | rd2 +--------------->sock1 | +---------+ | +-------+ + a. we(sock0) inject packet to qemu socket backend b. backend pass packet to filter redirector0(rd0) c. rd0 redirect packet to out_dev(chardev) which is connected with filter redirector1's(rd1) in_dev d. rd1 read this packet from in_dev, and pass to next filter redirector2(rd2) e. rd2 redirect packet to rd2's out_dev which is connected with an opened socketed(sock1) f. we read packet from sock1 and compare to what we inject Start qemu with: "-netdev socket,id=qtest-bn0,fd=%d " "-device rtl8139,netdev=qtest-bn0,id=qtest-e0 " "-chardev socket,id=redirector0,path=%s,server,nowait " "-chardev socket,id=redirector1,path=%s,server,nowait " "-chardev socket,id=redirector2,path=%s,nowait " "-object filter-redirector,id=qtest-f0,netdev=qtest-bn0," "queue=tx,outdev=redirector0 " "-object filter-redirector,id=qtest-f1,netdev=qtest-bn0," "queue=tx,indev=redirector2 " "-object filter-redirector,id=qtest-f2,netdev=qtest-bn0," "queue=tx,outdev=redirector1 " -------------------------------------- Case 2, rx traffic flow qemu side | test side | +---------+ | +-------+ | backend +---------------> sock1 | +----^----+ | +-------+ | | +----+----+ +-------+ | | rd0 +<-+chardev| | +---------+ +---+---+ | ^ | +---------+ | | | rd1 +------+ | +----^----+ | | | +----+----+ | +-------+ | rd2 <---------------+sock0 | +---------+ | +-------+ a. we(sock0) insert packet to filter redirector2(rd2) b. rd2 pass packet to filter redirector1(rd1) c. rd1 redirect packet to out_dev(chardev) which is connected with filter redirector0's(rd0) in_dev d. rd0 read this packet from in_dev, and pass ti to qemu backend which is connected with an opened socketed(sock1) e. we read packet from sock1 and compare to what we inject Start qemu with: "-netdev socket,id=qtest-bn0,fd=%d " "-device rtl8139,netdev=qtest-bn0,id=qtest-e0 " "-chardev socket,id=redirector0,path=%s,server,nowait " "-chardev socket,id=redirector1,path=%s,server,nowait " "-chardev socket,id=redirector2,path=%s,nowait " "-object filter-redirector,id=qtest-f0,netdev=qtest-bn0," "queue=rx,outdev=redirector0 " "-object filter-redirector,id=qtest-f1,netdev=qtest-bn0," "queue=rx,indev=redirector2 " "-object filter-redirector,id=qtest-f2,netdev=qtest-bn0," "queue=rx,outdev=redirector1 " Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30tests/test-filter-mirror:add filter-mirror unit testZhang Chen
In this unit test we will test the mirror function. start qemu with: -netdev socket,id=qtest-bn0,fd=sockfd -device e1000,netdev=qtest-bn0,id=qtest-e0 -chardev socket,id=mirror0,path=/tmp/filter-mirror-test.sock,server,nowait -object filter-mirror,id=qtest-f0,netdev=qtest-bn0,queue=tx,outdev=mirror0 We inject packet to netdev socket id = qtest-bn0, filter-mirror will copy and mirror the packet to mirror0. we read packet from mirror0 and then compare to what we injected. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-29Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into stagingPeter Maydell
# gpg: Signature made Tue 29 Mar 2016 01:48:09 BST using RSA key ID C0DE3057 # gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>" # gpg: aka "Jeffrey Cody <jeff@codyprime.org>" # gpg: aka "Jeffrey Cody <codyprime@gmail.com>" * remotes/cody/tags/block-pull-request: qemu-iotests: add no-op streaming test qemu-iotests: fix test_stream_partial() block: never cancel a streaming job without running stream_complete() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-28qemu-iotests: add no-op streaming testAlberto Garcia
This patch tests that in a partial block-stream operation, no data is ever copied from the base image. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 5272a2aa57bc0b3f981f8b3e0c813e58a88c974b.1458566441.git.berto@igalia.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-03-28qemu-iotests: fix test_stream_partial()Alberto Garcia
This test is streaming to the top layer using the intermediate image as the base. This is a mistake since block-stream never copies data from the base image and its backing chain, so this is effectively a no-op. In addition to fixing the base parameter, this patch also writes some data to the intermediate image before the test, so there's something to copy and the test is meaningful. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 2efa304da38b32d47c120ce728568a589c5a3afc.1458566441.git.berto@igalia.com Signed-off-by: Jeff Cody <jcody@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-23Merge remote-tracking branch 'remotes/armbru/tags/pull-ivshmem-2016-03-18' ↵Peter Maydell
into staging ivshmem: Fixes, cleanups, device model split # gpg: Signature made Mon 21 Mar 2016 20:33:54 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-ivshmem-2016-03-18: (40 commits) contrib/ivshmem-server: Print "not for production" warning ivshmem: Require master to have ID zero ivshmem: Drop ivshmem property x-memdev ivshmem: Clean up after the previous commit ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem ivshmem: Replace int role_val by OnOffAuto master qdev: New DEFINE_PROP_ON_OFF_AUTO ivshmem: Inline check_shm_size() into its only caller ivshmem: Simplify memory regions for BAR 2 (shared memory) ivshmem: Implement shm=... with a memory backend ivshmem: Tighten check of property "size" ivshmem: Simplify how we cope with short reads from server ivshmem: Drop the hackish test for UNIX domain chardev ivshmem: Rely on server sending the ID right after the version ivshmem: Propagate errors through ivshmem_recv_setup() ivshmem: Receive shared memory synchronously in realize() ivshmem: Plug leaks on unplug, fix peer disconnect ivshmem: Disentangle ivshmem_read() ivshmem: Simplify rejection of invalid peer ID from server ivshmem: Assert interrupts are set up once ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22qemu-log: support simple pid substitution for logsAlex Bennée
When debugging stuff that occurs over several forks it would be useful not to keep overwriting the one logfile you've set-up. This allows a simple %d to be included once in the logfile parameter which is substituted with getpid(). As the test cases involve checking user output they need g_test_trap_subprocess() support. As a result they are currently skipped on Travis builds due to the older glib involved. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Leandro Dorileo <l@dorileo.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-10-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 04:39:11 +0000