aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-02-25tests: add test-bdrv-graph-modVladimir Sementsov-Ogievskiy
Add two tests of node graph modification. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25test-bdrv-drain: AioContext switch in drained sectionKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-02-22Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16Li Zhijian
XLF_CAN_BE_LOADED_ABOVE_4G is set on vmlinuz shipped by Fedora-28 so that it's allowed to be loaded below 4 GB address. timeout is updated to 5 minutes as well since we need more time to load a large initrd to the guest CC: Wainer dos Santos Moschetta <wainersm@redhat.com> CC: Caio Carrara <ccarrara@redhat.com> CC: Cleber Rosa <crosa@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> CC: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <1548638112-31101-2-git-send-email-lizhijian@cn.fujitsu.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22Acceptance tests: use linux-3.6 and set vm memory to 4GiBLi Zhijian
QEMU have already supported to load up to 4G initrd if the sepcified memory is enough and XLF_CAN_BE_LOADED_ABOVE_4G is set by guest kernel linux-3.6 kernel shipped by Fedora-18 cannot support xldflags so that it cannot support loading more than 2GiB initrd CC: Wainer dos Santos Moschetta <wainersm@redhat.com> CC: Caio Carrara <ccarrara@redhat.com> CC: Cleber Rosa <crosa@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> CC: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <1548638112-31101-1-git-send-email-lizhijian@cn.fujitsu.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22tests.acceptance: adds simple migration testCaio Carrara
This change adds the simplest possible migration test. Beyond the test purpose itself it's also useful to exercise the multi virtual machines capabilities from base avocado qemu test class. Signed-off-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Caio Carrara <ccarrara@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190212193855.13223-3-ccarrara@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22tests.acceptance: adds multi vm capability for acceptance testsCaio Carrara
This change adds the possibility to write acceptance tests with multi virtual machine support. It's done keeping the virtual machines objects stored in a test attribute (dictionary). This dictionary shouldn't be accessed directly but through the new method added `get_vm`. This new method accept a list of args (that will be added as virtual machine arguments) and an optional name argument. The name is the key that identify a single virtual machine along the test machines available. If a name without a machine is informed a new machine will be instantiated. The current usage of vm in tests will not be broken by this change since it keeps a property called vm in the base test class. This property only calls the new method `get_vm` with default parameters (no args and 'default' as machine name). Signed-off-by: Caio Carrara <ccarrara@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190212193855.13223-2-ccarrara@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22Introduce a Python module structureCleber Rosa
This is a simple move of Python code that wraps common QEMU functionality, and are used by a number of different tests and scripts. By treating that code as a real Python module, we can more easily: * reuse code * have a proper place for the module's own unittests * apply a more consistent style * generate documentation Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190206162901.19082-2-crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22Acceptance tests: drop usage of ":avocado: enable"Cleber Rosa
The Avocado test runner attemps to find its INSTRUMENTED (that is, Python based tests) in a manner that is as safe as possible to the user. Different from plain Python unittest, it won't load or execute test code on an operation such as: $ avocado list tests/acceptance/ Before version 68.0, the logic implemented to identify INSTRUMENTED tests would require either the ":avocado: enable" or ":avocado: recursive" statement as a flag for tests that would not inherit directly from "avocado.Test". This is not necessary anymore, and because of that the boiler plate statements can now be removed. Reference: https://avocado-framework.readthedocs.io/en/68.0/release_notes/68_0.html#users-test-writers Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20190218173723.26120-1-crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-02-22tests/virtio-blk: add test for DISCARD commandStefano Garzarella
If the DISCARD feature is enabled, we try this command in the test_basic(), checking only the status returned by the request. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-11-sgarzare@redhat.com Message-Id: <20190221103314.58500-11-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22tests/virtio-blk: add test for WRITE_ZEROES commandStefano Garzarella
If the WRITE_ZEROES feature is enabled, we check this command in the test_basic(). Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-10-sgarzare@redhat.com Message-Id: <20190221103314.58500-10-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22tests/virtio-blk: add virtio_blk_fix_dwz_hdr() functionStefano Garzarella
This function is useful to fix the endianness of struct virtio_blk_discard_write_zeroes headers. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-9-sgarzare@redhat.com Message-Id: <20190221103314.58500-9-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22tests/virtio-blk: change assert on data_size in virtio_blk_request()Stefano Garzarella
The size of data in the virtio_blk_request must be a multiple of 512 bytes for IN and OUT requests, or a multiple of the size of struct virtio_blk_discard_write_zeroes for DISCARD and WRITE_ZEROES requests. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-8-sgarzare@redhat.com Message-Id: <20190221103314.58500-8-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22tests/test-bdrv-drain: use QEMU_IOVEC_INIT_BUFVladimir Sementsov-Ogievskiy
Use new QEMU_IOVEC_INIT_BUF() instead of qemu_iovec_init_external( ... , 1), which simplifies the code. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190218140926.333779-15-vsementsov@virtuozzo.com Message-Id: <20190218140926.333779-15-vsementsov@virtuozzo.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22tests/cdrom-test: only include isapc cdrom test when g_test_slow()Alex Bennée
We are seeing instability on our CI runs which has been there since the test was introduced. I suspect it triggers more on Travis due to their heavy load. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com>
2019-02-22tests/softfloat: always do quick softfloat testsAlex Bennée
Some operations take a long time and enabling "-l 2 -r all" can take more than a day which is stretching the definition of a "slow" test. Lets default to the quick test and leave a note for those who wish to run by hand. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-22tests/docker: peg netmap code to a specific versionAlex Bennée
Tracking head is always going to be at the whims of the upstream. Let's use a defined release so things don't magically change under us. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-22tests/docker: squash initial update and install step for debian9Alex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-21tests/tcg: target/mips: Add wrappers for MSA integer compare instructionsAleksandar Markovic
Add wrappers for MSA integer compare instructions. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
2019-02-21tests/tcg: target/mips: Change directory name 'bit-counting' to 'bit-count'Aleksandar Markovic
Change directory name 'bit-counting' to 'bit-count'. This is just for cosmetic and consistency sake. This was the only subdirectory in MSA test directory that uses ending 'ing'. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-21tests/tcg: target/mips: Correct path to headers in some test source filesAleksandar Markovic
Correct path to headers in tests/tcg/mips/user/ase/msa/bit-counting/* source files. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
2019-02-21tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOsLaszlo Ersek
Add UEFI-bootable qcow2-compressed ISO images built from: tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190204160325.4914-6-lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21tests/uefi-test-tools: add build scriptsLaszlo Ersek
Introduce the following build scripts under "tests/uefi-test-tools": * "build.sh" builds a single module (a UEFI application) from UefiTestToolsPkg, for a single QEMU emulation target. "build.sh" relies on cross-compilers when the emulation target and the build host architecture don't match. The cross-compiler prefix is computed according to a fixed, Linux-specific pattern. No attempt is made to copy or reimplement the GNU Make magic from "qemu/roms/Makefile" for cross-compiler prefix determination. The reason is that the build host OSes that are officially supported by edk2, and those that are supported by QEMU, intersect only in Linux. (Note that the UNIXGCC toolchain is being removed from edk2, <https://bugzilla.tianocore.org/show_bug.cgi?id=1377>.) * "Makefile" currently builds the "UefiTestToolsPkg/BiosTablesTest" application, for arm, aarch64, i386, and x86_64, with the help of "build.sh". "Makefile" turns each resultant UEFI executable into a UEFI-bootable, qcow2-compressed ISO image. The ISO images are output as "tests/data/uefi-boot-images/bios-tables-test.<TARGET>.iso.qcow2". Each ISO image should be passed to QEMU as follows: -drive id=boot-cd,if=none,readonly,format=qcow2,file=$ISO \ -device virtio-scsi-pci,id=scsi0 \ -device scsi-cd,drive=boot-cd,bus=scsi0.0,bootindex=0 \ "Makefile" assumes that "mkdosfs", "mtools", and "genisoimage" are present. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190204160325.4914-5-lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI appLaszlo Ersek
The "bios-tables-test" program in QEMU's test suite locates the RSD PTR ACPI table in guest RAM, and (chasing pointers to other ACPI tables) performs various sanity checks on the QEMU-generated and firmware-installed tables. Currently this set of test cases doesn't work with UEFI guests. The ACPI spec defines distinct methods for OSPM to locate the RSD PTR on traditional BIOS vs. UEFI platforms, and the UEFI method is more difficult to implement from the hypervisor side with just raw guest memory access. Add a UEFI application (to be booted in the UEFI guest) that populates a small, MB-aligned structure in guest RAM. The structure begins with a signature GUID. The hypervisor should loop over all MB-aligned pages in guest RAM until one matches the signature GUID at offset 0, at which point the hypervisor can fetch the RSDP address field(s) from the structure. QEMU's test logic currently spins on a pre-determined guest address, until that address assumes a magic value. The method described in this patch is conceptually the same ("busy loop until match is found"), except there is no hard-coded address. This plays a lot more nicely with UEFI guest firmware (we'll be able to use the normal page allocation UEFI service). Given the size of EFI_GUID (16 bytes -- 128 bits), mismatches should be astronomically unlikely. In addition, given the typical guest RAM size for such tests (128 MB), there are 128 locations to check in one iteration of the "outer" loop, which shouldn't introduce an intolerable delay after the guest stores the RSDP address(es), and then the GUID. The GUID that the hypervisor should search for is AB87A6B1-2034-BDA0-71BD-375007757785 Expressed as a byte array: { 0xb1, 0xa6, 0x87, 0xab, 0x34, 0x20, 0xa0, 0xbd, 0x71, 0xbd, 0x37, 0x50, 0x07, 0x75, 0x77, 0x85 } Note that in the patch, we define "gBiosTablesTestGuid" with all bits inverted. This is a simple method to prevent the UEFI binary, which incorporates "gBiosTablesTestGuid", from matching the actual GUID in guest RAM. The UEFI application is written against the edk2 framework, which was introduced earlier as a git submodule. The next patch will provide build scripts for maintainers. The source code follows the edk2 coding style, and is licensed under the 2-clause BSDL (in case someone would like to include UefiTestToolsPkg content in a different edk2 platform). The "UefiTestToolsPkg.dsc" platform description file resolves the used edk2 library classes to instances (= library implementations) such that the UEFI binaries inherit no platform dependencies. They are expected to run on any system that conforms to the UEFI-2.3.1 spec (which was released in 2012). The arch-specific build options are carried over from edk2's ArmVirtPkg and OvmfPkg platforms. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190204160325.4914-4-lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21vhost-user-test: create a temporary directory per TestServerPaolo Bonzini
This makes the tests more independent, and also the source and destination TestServers in the migration test. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-15-git-send-email-pbonzini@redhat.com> Message-Id: <1550165756-21617-10-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21vhost-user-test: small changes to init_hugepagefsPaolo Bonzini
After the conversion to qgraph, the equivalent of "main" will be in a constructor and will run even if the tests are not being requested. Therefore, it should not assert that init_hugepagefs succeeds and will be called when creating the TestServer. This patch changes the prototype of init_hugepagefs, this way the next patch looks nicer. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-14-git-send-email-pbonzini@redhat.com> Message-Id: <1550165756-21617-9-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21vhost-user-test: create a main loop per TestServerPaolo Bonzini
This makes the tests more independent and removes the need to defer test_server_free via an idle event source. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-13-git-send-email-pbonzini@redhat.com> Message-Id: <1550165756-21617-8-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-21vhost-net: compile it on all targets that have virtio-net.Paolo Bonzini
This shows a preexisting bug: if a KVM target did not have virtio-net enabled, it would fail with undefined symbols when vhost was enabled. This must now be fixed, lest targets that have no virtio-net fail to compile. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1543851204-41186-5-git-send-email-pbonzini@redhat.com> Message-Id: <1550165756-21617-6-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-19dirty-bitmap: Expose persistent flag to 'query-block'Eric Blake
Since qemu currently doesn't flush persistent bitmaps to disk until shutdown (which might be MUCH later), it's useful if 'query-block' at least shows WHICH bitmaps will (eventually) make it to persistent storage. Update affected iotests. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20190204210512.27458-1-eblake@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2019-02-18build-sys: move qmp-introspect per targetMarc-André Lureau
The following patches are going to introduce per-target #ifdef in the schemas. The introspection data is statically generated once, and must thus be built per-target to reflect target-specific configuration. Drop "do_test_visitor_in_qmp_introspect(&qmp_schema_qlit)" since the schema is no longer in a common object. It is covered by the per-target query-qmp-schema test instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-7-armbru@redhat.com>
2019-02-18qapi: Generate QAPIEvent stuff into separate filesMarkus Armbruster
Having to include qapi-events.h just for QAPIEvent is suboptimal, but quite tolerable now. It'll become problematic when we have events conditional on the target, because then qapi-events.h won't be usable from target-independent code anymore. Avoid that by generating it into separate files. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-18qapi: Clean up modular built-in code generation a bitMarkus Armbruster
We neglect to call .visit_module() for the special module we use for built-ins. Harmless, but clean it up anyway. The tests/qapi-schema/*.out now show the built-in module as 'module None'. Subclasses of QAPISchemaModularCVisitor need to ._add_module() this special module to enable code generation for built-ins. When this hasn't been done, QAPISchemaModularCVisitor.visit_module() does nothing for the special module. That looks like built-ins could accidentally be generated into the wrong module when a subclass neglects to call ._add_module(). Can't happen, because built-ins are all visited before any other module. But that's non-obvious. Switch off code generation explicitly. Rename QAPISchemaModularCVisitor._begin_module() to ._begin_user_module(). New QAPISchemaModularCVisitor._is_builtin_module(), for clarity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-4-armbru@redhat.com>
2019-02-14tests/tcg: target/mips: Add tests for MSA logic instructionsAleksandar Markovic
Add tests for MSA logic instructions. This includes following instructions: * AND.V - logical AND * NOR.V - logical NOR * OR.V - logical OR * XOR.V - logical XOR Each test consists of 80 test cases, so altogether there are 320 test cases. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add wrappers for MSA logic instructionsAleksandar Markovic
Add wrappers for MSA logic instructions. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add tests for MSA interleave instructionsAleksandar Markovic
Add tests for MSA interleave instructions. This includes following instructions: * ILVEV.B - interleave even (bytes) * ILVEV.H - interleave even (halfwords) * ILVEV.W - interleave even (words) * ILVEV.D - interleave even (doublewords) * ILVOD.B - interleave odd (bytes) * ILVOD.H - interleave odd (halfwords) * ILVOD.W - interleave odd (words) * ILVOD.D - interleave odd (doublewords) * ILVL.B - interleave left (bytes) * ILVL.H - interleave left (halfwords) * ILVL.W - interleave left (words) * ILVL.D - interleave left (doublewords) * ILVR.B - interleave right (bytes) * ILVR.H - interleave right (halfwords) * ILVR.W - interleave right (words) * ILVR.D - interleave right (doublewords) Each test consists of 80 test cases, so altogether there are 1280 test cases. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add wrappers for MSA interleave instructionsAleksandar Markovic
Add wrappers for MSA interleave instructions. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add tests for MSA bit counting instructionsAleksandar Markovic
Add tests for MSA bit counting instructions. This includes following instructions: * NLOC.B - number of leading ones (bytes) * NLOC.H - number of leading ones (halfwords) * NLOC.W - number of leading ones (words) * NLOC.D - number of leading ones (doublewords) * NLZC.B - number of leading zeros (bytes) * NLZC.H - number of leading zeros (halfwords) * NLZC.W - number of leading zeros (words) * NLZC.D - number of leading zeros (doublewords) * PCNT.B - population count / number of ones (bytes) * PCNT.H - population count / number of ones (halfwords) * PCNT.W - population count / number of ones (words) * PCNT.D - population count / number of ones (doublewords) Each test consists of 80 test cases, so altogether there are 960 test cases. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add wrappers for MSA bit counting instructionsAleksandar Markovic
Add a header that contains wrappers around MSA instructions assembler invocations. For now, only bit counting instructions (NLOC, NLZC, and PCNT; each in four data format flavors) are supported. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add a header with test utilitiesAleksandar Markovic
Add a header that contains test utilities. For now, it contains only a function for checking and printing test results for bit counting and similar MSA instructions. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Add a header with test inputsAleksandar Markovic
The file tests/tcg/mips/include/test_inputs.h is planned to contain various test inputs. For now, it contains 64 128-bit pattern inputs (alternating groups od ones and zeroes) and 16 128-bit random inputs. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-14tests/tcg: target/mips: Remove an unnecessary fileAleksandar Markovic
Remove a file that was added long time ago by mistake. The commit that introduced this file was commit d70080c4 (from 2012). Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-02-13char: allow specifying a GMainContext at opening timePaolo Bonzini
This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12tests: expand coverage of socket chardev testDaniel P. Berrangé
The current socket chardev tests try to exercise the chardev socket driver in both server and client mode at the same time. The chardev API is not very well designed to handle both ends of the connection being in the same process so this approach makes the test case quite unpleasant to deal with. This splits the tests into distinct cases, one to test server socket chardevs and one to test client socket chardevs. In each case the peer is run in a background thread using the simpler QIOChannelSocket APIs. The main test case code can now be written in a way that mirrors the typical usage from within QEMU. In doing this recfactoring it is possible to greatly expand the test coverage for the socket chardevs to test all combinations except for a server operating in blocking wait mode. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-16-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12chardev: ensure qemu_chr_parse_compat reports missing driver errorDaniel P. Berrangé
If no valid char driver was identified the qemu_chr_parse_compat method was silent, leaving callers no clue what failed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-8-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12chardev: forbid 'wait' option with client socketsDaniel P. Berrangé
The 'wait'/'nowait' parameter is used to tell server sockets whether to block until a client is accepted during initialization. Client chardevs have always silently ignored this option. Various tests were mistakenly passing this option for their client chardevs. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-6-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12tests/test-char: add muxed chardev testing for open/closeArtem Pisarenko
Validate that frontend callbacks for CHR_EVENT_OPENED/CHR_EVENT_CLOSED events are being issued when expected and in strictly pairing order. Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <ac67ff2d27dd51a0075d5d634355c9e4f7bb53de.1541507990.git.artem.k.pisarenko@gmail.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-11qcow2: list of bitmaps new test 242Andrey Shinkevich
A new test file 242 added to the qemu-iotests set. It checks the format of qcow2 specific information for the new added section that lists details of bitmaps. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Message-Id: <1549638368-530182-4-git-send-email-andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: pep8 compliance, avoid trailing blank line] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-11tests/vm: Be verbose while extracting compressed imagesPhilippe Mathieu-Daudé
Depending of the host hardware, copying and extracting VM images can take up to few minutes. Add verbosity to avoid the user to worry about VMs hanging. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190129175403.18017-2-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests/vm: expose BUILD_TARGET, TARGET_LIST and EXTRA_CONFIGURE_OPTSAlex Bennée
Now the underlying basevm support passes these along we can expose some additional variables to our Makefile to allow more customised tweaking of the build. For example: make vm-build-freebsd TARGET_LIST=aarch64-softmmu \ EXTRA_CONFIGURE_OPTS="--disable-tools --disable-docs" \ BUILD_TARGET=check-softfloat Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08tests/vm: add --build-target optionAlex Bennée
This allows us to invoke the build with a custom target (for the VMs that use the {target} format string specifier). Currently OpenBSD is still hardwired due to problems running check. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08tests/vm: call make check directly for netbsd/freebsd/ubuntu.i386Alex Bennée
The "make check" target calls check-qtest which has the appropriate system binaries as dependencies so we shouldn't need to do two steps of make invocation. Doing it in two steps was a hangover from when our make check couldn't run tests in parallel. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:16:27 +0000