Age | Commit message (Collapse) | Author |
|
'remotes/dgilbert/tags/pull-migration-20180724a' into staging
Migration pull for 3.0
Fixes only
# gpg: Signature made Tue 24 Jul 2018 19:31:39 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180724a:
migration: fix duplicate initialization for expected_downtime and cleanup_bh
tests: only update last_byte when at the edge
migration: disallow recovery for release-ram
migration: update recv bitmap only on dest vm
audio/hda: Fix migration
migrate: Fix cancelling state warning
migration: fix potential overflow in multifd send
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When gnutls negotiates TLS 1.3 instead of 1.2, the order of messages
sent by the handshake changes. This exposed a logic bug in the test
suite which caused us to wait for the server to see handshake
completion, but not wait for the client to see completion. The result
was the client didn't receive the certificate for verification and the
test failed.
This is exposed in Fedora 29 rawhide which has just enabled TLS 1.3 in
its GNUTLS builds.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Most of the TLS related tests are passing an in a "Error" object to
methods that are expected to fail, but then ignoring any error that is
set and instead asserting on a return value. This means that when an
error is unexpectedly raised, no information about it is printed out,
making failures hard to diagnose. Changing these tests to pass in
&error_abort will make unexpected failures print messages to stderr.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The test-vmstate test is a bit chatty because it triggers various
expected failure scenarios and the code in question uses error_report
instead of accepting 'Error **errp' parameters. To silence this test the
stubs for error_vprintf() were changed to send errors via
g_test_message() instead of stderr:
commit 28017e010ddf6849cfa830e898da3e44e6610952
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Oct 24 18:31:03 2016 +0200
tests: send error_report to test log
Implement error_vprintf to send the output of error_report to
the test log. This silences test-vmstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-3-git-send-email-pbonzini@redhat.com>
Unfortunately this change has global impact across the entire test suite
and means that when tests fail for unexpected reasons, the message is
not displayed on stderr. eg when using &error_abort in a call the test
merely prints
Unexpected error in qcrypto_tls_session_check_certificate() at crypto/tlssession.c:280:
and the actual error message is hidden, making it impossible to diagnose
the failure. This is especially problematic in CI or build systems where
it isn't possible to easily pass the --debug-log flag to tests and
re-run with the test log visible.
This change makes the previous big hammer much more nuanced, providing a
flag in the stub error_vprintf() that can used on a per-test basis to
silence the errors. Only the test-vmstate silences errors initially.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Calling qcrypto_init ensures that all relevant initialization is
done. In particular this honours the debugging settings and thread
settings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The only possible change of last_byte is when it reaches the edge.
Setting it every time might let last_byte contain an invalid data when
memory corruption is detected, then the check of the next byte will be
incorrect. For example, a single page corruption at address 0x14ad000
will also lead to a "fake" corruption at 0x14ae000:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Memory content inconsistency at 14ae000 first_byte = 44 last_byte = ef current = 44 hit_edge = 0
After the patch, it'll only report the corrputed page:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The combination of being rather esoteric and needing to support mmap @
0 means this only ever worked under translation. It has now regressed
even further and is no longer useful. Kill it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Setting up binfmt_misc is outside of the scope of the docker.py script
but we can at least validate it with any given executable so we have a
more useful error message than the sed line of deboostrap failing
cryptically.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We do a minimum version check for the debootstrap but if the distro
has added their own minor version tick it would fail and fall-back to
the SCM version. This is sub-optimal as the latest/greatest version
may be broken at any one particular time. We fix that with a little
sed magic on the version string before passing to our ugly shell
versioning check.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This is just a note that later versions of debootstrap don't
technically need this hack.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This silents the following warning:
Cloning into './debootstrap.git'...
warning: redirecting to https://salsa.debian.org/installer-team/debootstrap.git/
See https://lists.debian.org/debian-devel-announce/2018/01/msg00004.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
When a check fails we currently just report why we failed. This is not
totally helpful to people who want to boot-strap a new image. Report a
hint as to why it failed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fam Zheng <famz@redhat.com>
|
|
The addition of QEMU_TARGET was intended to ensure we fall back to
checking for the existence of an image if the build system was not
currently configured to build it. However this breaks the direct use
of the rule for building custom binfmt_misc images. We already check
for EXECUTABLE so let us just use that as a proxy for deciding if we
are just going to check the image exits.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This allows us to run a particular test on all docker images. For
example:
make docker-test-unit
Will run the unit tests on every supported image. At the same time
rename docker-test to docker-all-tests to be clearer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This test doesn't even build QEMU, it just builds and runs all the
unit tests. Intended to make checking unit tests on all docker images
easier.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Rename DOCKER_INTERMEDIATE_IMAGES to DOCKER_PARTIAL_IMAGES and add the
incomplete cross compiler images that can build tests but can't build
QEMU itself. We also add debian, debian-bootstrap and the tricode
images to the list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Not all our images are able to run the tests. Rather than use features
we can just check for the existence and run-ability of gtester. If the
image has been setup for binfmt_misc it will be able to run anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Not all docker images can run the check step. Let's move everything
into a common helper so we don't need to replicate checks in the
future.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This allows some tests that just want to configure QEMU's source tree
to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
As this is called directly from the Makefile while determining
dependencies and it is possible the user was configured in one window
but not have credentials in the other. Let's catch the Exceptions and
deal with it quietly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This image isn't going to build anything significant as it is just
intended for building test cases. In case it does end up getting
inadvertently included in a build lets aim for the minimal possible
product.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
We need both git and a working compiler to build the tools. Although
the qemu:debian9 image also has a bunch of extra dependencies it would
be fairly unusual for a user not to already have this layer available
for one of our many other docker images so lets not complicate things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The .gitignore was being a little over enthusiastic hiding files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Block layer patches:
- vvfat: Disable debug message by default
- qemu-iotests fixes
- Fix typos in comments
# gpg: Signature made Mon 23 Jul 2018 17:44:40 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block/vvfat: Disable debug message by default
iotests: Disallow compat=0.10 in 223
iotest: Fix filtering order in 226
iotests: remove LUKS support from test 226
qemu-img: avoid overflow of min_sparse parameter
block: Fix typos in comments (found by codespell)
qemu-iotests: Use host_device instead of file in 149
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d53172 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
|
|
Bug fixes.
# gpg: Signature made Tue 17 Jul 2018 16:06:07 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
Document command line options with single dash
opts: remove redundant check for NULL parameter
i386: only parse the initrd_filename once for multiboot modules
i386: fix regression parsing multiboot initrd modules
virtio-scsi: fix hotplug ->reset() vs event race
qdev: add HotplugHandler->post_plug() callback
hw/char/serial: retry write if EAGAIN
PC Chipset: Improve serial divisor calculation
vhost-user-test: added proper TestServer *dest initialization in test_migrate()
hyperv: ensure VP index equal to QEMU cpu_index
hyperv: rename vcpu_id to vp_index
accel: Fix typo and grammar in comment
dump: add kernel_gs_base to QEMU CPU state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
server->bus in _test_server_free() could be NULL, since TestServer
*dest in test_migrate() was not properly initialized like TestServer *s.
Added init_virtio_dev(dest) and uninit_virtio_dev(dest), so the fields
are properly set and when test_server_free(dest); is called, they can
be correctly freed.
The reason for that is init_virtio_dev() calls qpci_init_pc(), that
creates a QPCIBusPC * (returned as QPCIBus *), while test_server_free()
calls qpci_free_pc(), that frees the QPCIBus *. Not calling
init_virtio_dev() would leave the QPCIBus * of TestServer unset.
Problem came out once I modified pci-pc.c and pci-pc.h, modifying
QPCIBusPC by adding another field before QPCIBus bus. Re-running the
tests showed vhost-user-test failing.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-Id: <1530022733-29581-1-git-send-email-esposem@usi.ch>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142f resolved]
|
|
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.
This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.
The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.
[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test that we're rejecting what we ought to for file,
host_driver and host_cdrom drivers. Test that we're
seeing the deprecated message for block and chardevs
on the file driver.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
197 is one example where _make_test_img is used twice without stopping
the NBD server in between. An error will occur like this:
@@ -26,9 +26,13 @@
=== Partial final cluster ===
+qemu-img: TEST_DIR/t.IMGFMT: Failed to get "resize" lock
+Is another process using the image?
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1024
+Failed to find an available port: Address already in use
read 1024/1024 bytes at offset 0
Patch _make_test_img to stop the old qemu-nbd before starting a new one,
which fixes this problem, and similarly 215.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This step was left behind my mistake. As suggested by the echoed text,
the intention was to test two devices with the same image, with
different options. The behavior should be the same as two QEMU
processes. Complete it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block layer patches:
- Copy offloading fixes for when the copy increases the image size
- Temporary revert of the removal of deprecated -drive options
- Fix request serialisation in the image fleecing scenario
- Fix copy-on-read crash with unaligned image size
- Fix another drain crash
# gpg: Signature made Tue 10 Jul 2018 16:37:52 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (24 commits)
block: Use common write req handling in truncate
block: Fix bdrv_co_truncate overlap check
block: Use common req handling in copy offloading
block: Use common req handling for discard
block: Fix handling of image enlarging write
block: Extract common write req handling
block: Use uint64_t for BdrvTrackedRequest byte fields
block: Use BdrvChild to discard
block: Add copy offloading trace points
block: Prefix file driver trace points with "file_"
Revert "block: Remove deprecated -drive geometry options"
Revert "block: Remove deprecated -drive option addr"
Revert "block: Remove deprecated -drive option serial"
Revert "block: Remove dead deprecation warning code"
block/blklogwrites: Make sure the log sector size is not too small
qapi/block-core.json: Add missing documentation for blklogwrites log-append option
block/backup: fix fleecing scheme: use serialized writes
block: add BDRV_REQ_SERIALISING flag
block: split flags in copy_range
block/io: fix copy_range
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We dumped something when network failure happens. We should avoid those
messages to be dumped when running the tests:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
OK
After the patch:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: OK
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Test the postcopy recovery procedure by emulating a network failure
using migrate-pause command.
Tested-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-10-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
It's generalized from wait_for_migration_complete() to allow us to wait
for any migration status besides failure.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Introduce helpers to query migration states and use it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
For example, we can pass in '"resume": true' to resume a migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Separate the old postcopy UNIX socket test into three steps, provide a
helper for each step. With these helpers, we can do more compliated
tests like postcopy recovery, while keep the codes shared.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix up merge with 2e295789 / Skip tests for ppc tcg
|
|
This reverts commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This reverts commit b0083267444a5e0f28391f6c2831a539f878d424.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Luks needs special parameters to operate the image. Since this test is
focusing on image fleecing, skip skip that format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This new test verifies that VMDK backing file reads fail when the
backing file has a non-matching CID. This includes non-VMDK backing
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The CMSDK timer behaviour is that an interrupt is triggered when the
counter counts down from 1 to 0; however one is not triggered if the
counter is manually set to 0 by a guest write to the counter register.
Currently ptimer can't handle this; add a policy option to allow
a ptimer user to request this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20180703171044.9503-2-peter.maydell@linaro.org
|