| Age | Commit message (Collapse) | Author |
|---|
|
The libqos driver for omap_i2c currently does not work on Big Endian.
Introduce helpers for reading from and writing to 16-bit armel registers.
This fixes tmp105-test failures on ppc.
To prepare for a QTest-level endianness solution, poison mem{read,write}
and always use the helpers. Adopt the expected signatures.
To avoid an unused variable warning, assert the STAT Single Byte Data
bit but, due to it not getting cleared, only it being set when len == 1.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1360600914-5448-3-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The [qtest_]in[bwl]() functions/macros don't have a value argument.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1360604139-16797-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It's OK and expected for visitors to return errors when presented with
the fuzz test's random data. Since the fuzzer doesn't care about
errors, we pass in NULL rather than an Error**. This fixes a bug in
the fuzzer where it was passing the same Error** into each visitor,
with the effect that once one visitor returned an error, each later
visitor would notice that it had been passed in an Error** representing
an already set error, and do nothing.
For the case of visit_type_str() we also need to handle the case where
an error means that the visitor doesn't set our char*. We initialize
the pointer to NULL so we can safely g_free() it regardless of whether
the visitor allocated a string for us or not.
This fixes a problem where this test failed the MacOSX malloc()
consistency checks and might segfault on other platforms [due
to calling free() on an uninitialized pointer variable when
visit_type_str() failed.].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
There are lots of duplicate parsing code using strto*() in QEMU, and
most of that code is broken in one way or another. Even the visitors
code have duplicate integer parsing code[1]. This introduces functions
to help parsing unsigned int values: parse_uint() and parse_uint_full().
Parsing functions for signed ints and floats will be submitted later.
parse_uint_full() has all the checks made by opts_type_uint64() at
opts-visitor.c:
- Check for NULL (returns -EINVAL)
- Check for negative numbers (returns -EINVAL)
- Check for empty string (returns -EINVAL)
- Check for overflow or other errno values set by strtoll() (returns
-errno)
- Check for end of string (reject invalid characters after number)
(returns -EINVAL)
parse_uint() does everything above except checking for the end of the
string, so callers can continue parsing the remainder of string after
the number.
Unit tests included.
[1] string-input-visitor.c:parse_int() could use the same parsing code
used by opts-visitor.c:opts_type_int(), instead of duplicating that
logic.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We've seen this repeatedly in buildbot but I can now reliably
reproduce it myself too. With a few hundred runs of 'make check',
qemu-system-sparc will hang consuming 100% CPU. I've attached GDB
to the hung process and unfortunately, I can't get anything useful
out of GDB (RIP is not a valid simple and there is nothing else on
the stack).
At any rate, since this only manifests in qemu-system-sparc and it
doesn't appear to be a qtest specific problem, I think we should
disable it until the problem is resolved.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Kevin Wolf (7) and others
# Via Stefan Hajnoczi
* stefanha/block:
block/raw-posix: Build fix for O_ASYNC
vmdk: Allow space in file name
parallels: Fix bdrv_open() error handling
dmg: Use g_free instead of free
dmg: Fix bdrv_open() error handling
vpc: Fix bdrv_open() error handling
cloop: Fix bdrv_open() error handling
bochs: Fix bdrv_open() error handling
sheepdog: pass vdi_id to sheep daemon for sd_close()
vmdk: Allow selecting SCSI adapter in image creation
block: Adds mirroring tests for resized images
block: Fix is_allocated_above with resized files
qemu-iotests: Add regression test for b7ab0fea
|
|
When running "make check" with gcov enabled, we get the following
message:
hw/tmp105.gcda:cannot open data file, assuming not executed
The problem happens because:
* tmp105-test exits before QEMU exits, because waitpid() at
qtest_quit() fails;
* waitpid() fails because there's another process already
waiting for the QEMU process;
* The process that is already waiting for QEMU is the child created by
qtest_init() to run system();
* qtest_quit() is incorrectly waiting for the QEMU PID directly instead
of the child created by qtest_init().
This fixes the problem by sending SIGTERM to QEMU, but waiting for the
child process created by qtest_init() (that exits immediately after QEMU
exits).
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This test verifies two mirroring issues are fixed with resized images:
* sync='top' creates an image that is the proper size
* sync='full' doesn't cause an assertion failure and crash qemu
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
It turned out that the change in b7ab0fea was actually a real qcow2
corruption fix. This is a reproducer for the bug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The pos field in the DSPControl register is not correctly initialized.
Per documentation, the result of MTHLIP is unpredictable if the value of the
pos field before the execution is greater than 32.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Struct tm does not have tm_gmtoff field on illumos.
Fix the build by not zero-initializing these fields on Solaris.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
|
|
This introduces utility functions for the APIC ID calculation, based on:
Intel® 64 Architecture Processor Topology Enumeration
http://software.intel.com/en-us/articles/intel-64-architecture-processor-topology-enumeration/
The code should be compatible with AMD's "Extended Method" described at:
AMD CPUID Specification (Publication #25481)
Section 3: Multiple Core Calcuation
as long as:
- nr_threads is set to 1;
- OFFSET_IDX is assumed to be 0;
- CPUID Fn8000_0008_ECX[ApicIdCoreIdSize[3:0]] is set to
apicid_core_width().
Unit tests included.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Since x86_64 is a superset of i386 and reuses all its test cases, adopt
all the i386 gcov source files as well, substituting their paths
appropriately.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
m48t59-test is individually being executed for sparc and sparc64, so add
the gcov source file for sparc64 as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Commit 6e9989034b176a8e4cfdccd85892abfa73977ba7 introduced a new qtest
test case but misspelled gcov, leading to no coverage analysis. Fix it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Perform input tests on random data.
Improvement to code coverage for qapi/string-input-visitor.c
is about 3 percentage points.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
I had missed the introduction of the gcov-files-* variables.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
hbitmap_iter_init causes an out-of-bounds access when the "first"
argument is or greater than or equal to the size of the bitmap.
Forbid this with an assertion, and remove the failing testcase.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
aio_poll() must return true if any work is still pending, even if it
didn't make progress, so that bdrv_drain_all() doesn't stop waiting too
early. The possibility of stopping early occasionally lead to a failed
assertion in bdrv_drain_all(), when some in-flight request was missed
and the function didn't really drain all requests.
In order to make that change, the return value as specified in the
function comment must change for blocking = false; fortunately, the
return value of blocking = false callers is only used in test cases, so
this change shouldn't cause any trouble.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Exercise all four commands of the TMP105, testing for an issue in the
I2C TX path.
The test case uses the N800's OMAP I2C and is the first for ARM.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This adds a simple I2C API and a driver implementation for omap_i2c.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use a static library to eliminate repetition in the linking rules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This prepares the creation of libqemuutil.a in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We need to eliminate calls to qemu_aio_flush() since the function is
being removed. Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.
Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
