aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-12-18block: Error out on image creation with conflicting size optionsKevin Wolf
If both the create options (qemu-img create -o ...) and the size parameter were given, the size parameter was silently ignored. Instead, make specifying two sizes an error. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-18qemu-img: fix info --backing-chain --image-optsStefan Hajnoczi
Only apply --image-opts to the topmost image when listing an entire backing chain. It is incorrect to treat backing filenames as image options. Assuming we have the backing chain t.IMGFMT.base <- t.IMGFMT.mid <- t.IMGFMT, qemu-img info fails as follows: $ qemu-img info --backing-chain --image-opts \ driver=qcow2,file.driver=file,file.filename=t.IMGFMT qemu-img: Could not open 'TEST_DIR/t.IMGFMT.mid': Cannot find device=TEST_DIR/t.IMGFMT.mid nor node_name=TEST_DIR/t.IMGFMT.mid Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-18iotests: Skip test 079 if it is not possible to create large filesThomas Huth
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis (which we will hopefully enable in our CI soon). These containers apparently do not allow large files to be created. Test 079 tries to create a 4G sparse file, which is apparently already too big for these containers, so check first whether we can really create such files before executing the test. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-18iotests: Skip test 060 if it is not possible to create large filesThomas Huth
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis (which we will hopefully enable in our CI soon). These containers apparently do not allow large files to be created. The repair process in test 060 creates a file of 64 GiB, so test first whether such large files are possible and skip the test if that's not the case. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-18iotests: Provide a function for checking the creation of huge filesThomas Huth
Some tests create huge (but sparse) files, and to be able to run those tests in certain limited environments (like CI containers), we have to check for the possibility to create such files first. Thus let's introduce a common function to check for large files, and replace the already existing checks in the iotests 005 and 220 with this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-17Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2019-12-17' into staging * Removal of the deprecated bluetooth code * Some qtest and misc patches # gpg: Signature made Tue 17 Dec 2019 08:09:08 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-12-17: tests: use g_test_rand_int tests/Makefile: Fix check-report.* targets shown in check-help glib: use portable g_setenv() hw/misc/ivshmem: Bury dead legacy INTx code pseries: disable migration-test if /dev/kvm cannot be used tests: fix modules-test 'duplicate test case' error Remove libbluetooth / bluez from the CI tests Remove the core bluetooth code hw/usb: Remove the USB bluetooth dongle device hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-17Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' ↵Peter Maydell
into staging Python queue 2019-12-17 # gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT # gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3 # gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3 * remotes/cleber/tags/python-next-pull-request: python/qemu: Remove unneeded imports in __init__ python/qemu: accel: Add tcg_available() method python/qemu: accel: Strengthen kvm_available() checks python/qemu: accel: Add list_accel() method python/qemu: Move kvm_available() to its own module Acceptance tests: use relative location for tests Acceptance tests: use avocado tags for machine type Acceptance tests: introduce utility method for tags unique vals Acceptance test x86_cpu_model_versions: use default vm tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine python/qemu: Add set_qmp_monitor() to QEMUMachine analyze-migration.py: replace numpy with python 3.2 analyze-migration.py: fix find() type error Revert "Acceptance test: cancel test if m68k kernel packages goes missing" tests/boot_linux_console: Fetch assets from Debian snapshot archives Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-17tests: use g_test_rand_intPaolo Bonzini
g_test_rand_int provides a reproducible random integer number, using a different number seed every time but allowing reproduction using the --seed command line option. It is thus better suited to tests than g_random_int or random. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17tests/Makefile: Fix check-report.* targets shown in check-helpWainer dos Santos Moschetta
The check-report.html and check-report.xml targets were replaced with check-report.tap in commit 9df43317b82 but the check-help text was not updated so it still lists check-report.html. Fixes: 9df43317b82 Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20191211204427.4681-2-wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17glib: use portable g_setenv()Marc-André Lureau
We have a setenv() wrapper in os-win32.c that no one is actually using. Drop it and change to g_setenv() uniformly. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17pseries: disable migration-test if /dev/kvm cannot be usedLaurent Vivier
On ppc64, migration-test only works with kvm_hv, and we already have a check to verify the module is loaded. kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists, but on some systems (like build systems) /dev/kvm can be missing (by administrators choice). And as kvm_hv exists test-migration is started but QEMU falls back to TCG because it cannot be used: Could not access KVM kernel module: No such file or directory failed to initialize KVM: No such file or directory Back to tcg accelerator And as the test is done with TCG, it fails. As for s390x, we must check for the existence and the access rights of /dev/kvm. Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20191120170955.242900-1-lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17tests: fix modules-test 'duplicate test case' errorCole Robinson
./configure --enable-sdl --audio-drv-list=sdl --enable-modules Will generate two identical test names: /$arch/module/load/sdl Which generates an error like: (tests/modules-test:23814): GLib-ERROR **: 18:23:06.359: duplicate test case path: /aarch64//module/load/sdl Add the subsystem prefix in the name as well, so instead we get: /$arch/module/load/audio-sdl /$arch/module/load/ui-sdl Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <d64c9aa098cc6e5c0b638438c4959eddfa7e24e2.1573679311.git.crobinso@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-17Remove libbluetooth / bluez from the CI testsThomas Huth
Since the bluetooth code has been removed, we don't need to test with this library anymore. Message-Id: <20191120091014.16883-5-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-16python/qemu: Move kvm_available() to its own moduleWainer dos Santos Moschetta
This creates the 'accel' Python module to be the home for utilities that deal with accelerators. Also moved kvm_available() from __init__.py to this new module. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216191438.93418-2-wainersm@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Acceptance tests: use relative location for testsCleber Rosa
An Avocado Test ID[1] is composed by a number of components, but it starts with the Test Name, usually a file system location that was given to the loader. Because the source directory is being given as a prefix to the "tests/acceptance" directory containing the acceptance tests, the test names will needlessly include the directory the user is using to host the QEMU sources (and/or build tree). Let's remove the source dir (or a build dir) from the path given to the test loader. This should give more constant names, and when using result servers and databases, it should give the same test names across executions from different people or from different directories. [1] - https://avocado-framework.readthedocs.io/en/69.0/ReferenceGuide.html#test-id Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20191104151323.9883-5-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Acceptance tests: use avocado tags for machine typeCleber Rosa
The same way the arch tag is being used as a fallback for the arch parameter, let's do the same for QEMU's machine and avoid some boiler plate code. This is now possible because, since Avocado 72.0, it's possible to use tags with names that match the machine types on QEMU. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20191104151323.9883-4-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Acceptance tests: introduce utility method for tags unique valsCleber Rosa
Currently a test can describe the target architecture binary that it should primarily be run with, be setting a single tag value. The same approach is expected to be done with other QEMU aspects to be tested, for instance, the machine type and accelerator, so let's generalize the logic into a utility method. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20190924194501.9303-3-crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Acceptance test x86_cpu_model_versions: use default vmCleber Rosa
The default vm provided by the test, available as self.vm, serves the same purpose of the one obtained by self.get_vm(), but saves a line and matches the style of other tests. Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20190924194501.9303-2-crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachineWainer dos Santos Moschetta
On linux_initrd and empty_cpu_model tests the same effect of calling QEMU through run() to inspect the terminated process is achieved with a sequence of set_qmp_monitor() / launch() / wait() commands on an QEMUMachine object. This patch changes those tests to use QEMUMachine instead, so they follow the same pattern to launch QEMU found on other acceptance tests. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20191211185536.16962-3-wainersm@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Revert "Acceptance test: cancel test if m68k kernel packages goes missing"Philippe Mathieu-Daudé
Now than we use the stable snapshot archive, we can remove this check. This reverts commit d2499aca4bac613d837e2720e7bbe3378bc91245. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191126223810.20180-3-philmd@redhat.com> Tested-by: Willian Rampazzo <wrampazz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16tests/boot_linux_console: Fetch assets from Debian snapshot archivesPhilippe Mathieu-Daudé
The kernel packaged was fetched from an unstable repository. Use the stable snapshot archive instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191126223810.20180-2-philmd@redhat.com> Tested-by: Willian Rampazzo <wrampazz@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2019-12-16Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-dec-16-2019' ↵Peter Maydell
into staging MIPS queue for December 16th, 2019 # gpg: Signature made Mon 16 Dec 2019 12:29:24 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full] # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-dec-16-2019: MAINTAINERS: Add a file to MIPS section MAINTAINERS: Add three files to Malta section MAINTAINERS: Adjust maintainership for Malta board MAINTAINERS: Adjust maintainership for Fulong 2E board MAINTAINERS: Add a section on UI translation hw/mips: Deprecate the r4k machine mips: fulong 2e: Renovate coding style mips: r4000: Renovate coding style mips: mipssim: Renovate coding style mips: malta: Renovate coding style mips: jazz: Renovate coding style Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16mips: malta: Renovate coding styleFilip Bozuta
The script checkpatch.pl located in scripts folder was used to detect all errors and warrnings in files: hw/mips/mips_malta.c hw/mips/gt64xxx_pci.c tests/acceptance/linux_ssh_mips_malta.py All these mips malta machine files were edited and all the errors and warrings generated by the checkpatch.pl script were corrected and then the script was ran again to make sure there are no more errors and warnings. Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1575640687-20744-3-git-send-email-Filip.Bozuta@rt-rk.com>
2019-12-16hw/arm/acpi: enable SHPC native hot plugHeyi Guo
After the introduction of generic PCIe root port and PCIe-PCI bridge, we will also have SHPC controller on ARM, so just enable SHPC native hot plug. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-3-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/acpi: simplify AML bit and/or statementHeyi Guo
The last argument of AML bit and/or statement is the target variable, so we don't need to use a NULL target and then an additional store operation; using just aml_and() or aml_or() statement is enough. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-2-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-09docker: remove libcap development packagesPaolo Bonzini
Libcap was dropped from virtio-9p (commit 7e46261368d1), so remove it from the dockerfiles as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> [groug, mention SHA1 that dropped libcap] Signed-off-by: Greg Kurz <groug@kaod.org>
2019-11-26Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-rc3-testing-261119-1' into staging A few vm-test updates - use Ubuntu 18.04 for i386 image - python3 for centos and docker - install locales for ubuntu # gpg: Signature made Tue 26 Nov 2019 11:31:26 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-rc3-testing-261119-1: tests/vm/ubuntu: update i386 image to 18.04 tests/vm/ubuntu: include language pack to silence locale warnings tests/vm/centos: fix centos build target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-26Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-11-26' ↵Peter Maydell
into staging Block patches for 4.2.0-rc3: - Fix for shared storage migration with persistent dirty bitmaps # gpg: Signature made Tue 26 Nov 2019 13:27:32 GMT # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-11-26: iotests: add new test cases to bitmap migration block/qcow2-bitmap: fix bitmap migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-26iotests: add new test cases to bitmap migrationVladimir Sementsov-Ogievskiy
Add optional pre-shutdown: shutdown/launch vm before migration. This leads to storing persistent bitmap to the storage, which breaks migration with dirty-bitmaps capability enabled and shared storage until fixed by previous commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20191125125229.13531-3-vsementsov@virtuozzo.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-11-26tests/vm/ubuntu: update i386 image to 18.04Alex Bennée
The current image is broken while running qtests but the bug go away when built with a newer Ubuntu i386 image. I was unable to replicate the crash on Debian Buster for i386 either so I'm concluding it is a distro problem. Let's paper over that crack by updating our 32 bir test image. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-26tests/vm/ubuntu: include language pack to silence locale warningsAlex Bennée
The iotests in particular don't like the output being spammed with warnings about locales. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-26tests/vm/centos: fix centos build targetAlex Bennée
To be able to run the docker tests centos has here we have to install python3 as well as the basic tools. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-26pseries: fix migration-test and pxe-testLaurent Vivier
Commit 29cb4187497d ("spapr: Set VSMT to smp_threads by default") has introduced a new default value for VSMT that is not supported by old kernels (before 4.13 kernel) and this breaks "make check" on these kernels. To fix that, explicitly set in the involved tests the value that was used as the default value before the change. Cc: Greg Kurz <groug@kaod.org> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20191120142539.236279-1-lvivier@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-11-21Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1' into staging A few test and doc fixes: - tweak DEBUG behaviour for vm-test-build - rename and update plug docs for versioning - slim down MAIN_SOFTMMU_TARGETS # gpg: Signature made Wed 20 Nov 2019 10:56:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1: tests/tcg: modify multiarch tests to work with clang .travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETS docs/devel: update tcg-plugins.rst with API versioning details docs/devel: rename plugins.rst to tcg-plugins.rst tests/vm: make --interactive (and therefore DEBUG=1) unconditional Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-20tests/tcg: modify multiarch tests to work with clangTaylor Simpson
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1574032465-12186-1-git-send-email-tsimpson@quicinc.com> [AJB: tweak header line] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-11-20tests/vm: make --interactive (and therefore DEBUG=1) unconditionalAlex Bennée
While the concept of only dropping to ssh if a test fails is nice it is more useful for this to be unconditional. You usually just want to get the build up and running and then noodle around debugging or attempting to replicate. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-11-20tests: acpi: always retain dumped ACPI tables in case of errorIgor Mammedov
If IASL wasn't able to parse expected file, test will just print warning "Warning! iasl couldn't parse the expected aml\n" and remove temporary table dumped from guest. Typically expected tables are always valid, with an exception when patchset introduces new tables. Make sure dumped tables are retained even if expected files are not valid, so one could have a chance to manualy check new tables. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1574240560-12538-1-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-11-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* microvm docs and fixes (Sergio, Liam) * New processor features for Intel errata (myself, Pawan) * Kconfig fixes (myself, Thomas) * Revert mc146818rtc change (myself) * Deprecate scsi-disk (myself) * RTC fix (myself, Marcelo) # gpg: Signature made Tue 19 Nov 2019 09:03:49 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: mc146818rtc: fix timer interrupt reinjection again Revert "mc146818rtc: fix timer interrupt reinjection" scsi: deprecate scsi-disk hw/i386: Move save_tsc_khz from PCMachineClass to X86MachineClass docs/microvm.rst: add instructions for shutting down the guest docs/microvm.rst: fix alignment in "Limitations" vfio: vfio-pci requires EDID hw/i386: Fix compiler warning when CONFIG_IDE_ISA is disabled target/i386: Export TAA_NO bit to guests target/i386: add PSCHANGE_NO bit for the ARCH_CAPABILITIES MSR microvm: fix memory leak in microvm_fix_kernel_cmdline scripts: Detect git worktrees for get_maintainer.pl --git Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19scsi: deprecate scsi-diskPaolo Bonzini
It's an old compatibility shim that just delegates to scsi-cd or scsi-hd. Just like ide-drive, we don't need this. Acked-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-18tests: More iotest 223 improvementsEric Blake
Run the core of the test twice, once without iothreads, and again with, for more coverage of both setups. Suggested-by: Nir Soffer <nsoffer@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20191114213415.23499-5-eblake@redhat.com>
2019-11-18iotests: Include QMP input in .out filesEric Blake
We generally include relevant HMP input in .out files, by virtue of the fact that HMP echoes its input. But QMP does not, so we have to explicitly inject it in the output stream (appropriately filtered to keep the tests passing), in order to make it easier to read .out files to see what behavior is being tested (especially true where the output file is a sequence of {'return': {}}). Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114213415.23499-4-eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-11-18iotests: Switch nbd tests to use Unix rather than TCPEric Blake
Up to now, all it took to cause a lot of iotest failures was to have a background process such as 'nbdkit -p 10810 null' running, because we hard-coded the TCP port. Switching to a Unix socket eliminates this contention. We still have TCP coverage in test 233, and that test is more careful to not pick a hard-coded port. Add a comment explaining where the format layer applies when using NBD as protocol (until NBD gains support for a resize extension, we only pipe raw bytes over the wire). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20191114213415.23499-3-eblake@redhat.com> [eblake: Tweak socket name per Max Reitz' review]
2019-11-18iotests: Fix 173Eric Blake
This test has been broken since 3.0. It used TEST_IMG to influence the name of a file created during _make_test_img, but commit 655ae6bb changed things so that the wrong file name is being created, which then caused _launch_qemu to fail. In the meantime, the set of events issued for the actions of the test has increased. Why haven't we noticed the failure? Because the test rarely gets run: './check -qcow2 173' is insufficient (that defaults to using file protocol) './check -nfs 173' is insufficient (that defaults to using raw format) so the test is only run with: ./check -qcow2 -nfs 173 Note that we already have a number of other problems with -nfs: ./check -nfs (fails 18/30) ./check -qcow2 -nfs (fails 45/76 after this patch, if exports does not permit 'insecure') and it's not on my priority list to fix those. Rather, I found this because of my next patch's work on tests using _send_qemu_cmd. Fixes: 655ae6b Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20191114213415.23499-2-eblake@redhat.com>
2019-11-18iotests: Test NBD client reconnectionAndrey Shinkevich
The test for an NBD client. The NBD server is disconnected after the client write request. The NBD client should reconnect and complete the write operation. Suggested-by: Denis V. Lunev <den@openvz.org> Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Message-Id: <1573529976-815699-1-git-send-email-andrey.shinkevich@virtuozzo.com>
2019-11-18iotests: Test multiple blockdev-snapshot callsKevin Wolf
Test that doing a second blockdev-snapshot doesn't make the first overlay's backing file go away. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-18iotests: Fix "no qualified output" error pathKevin Wolf
The variable for error messages to be displayed is $results, not $reason. Fix 'check' to print the "no qualified output" error message again instead of having a failure without any message telling the user why it failed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-11-18qemu-iotests/iotests.py: improve assert_qmp messageVladimir Sementsov-Ogievskiy
From the two values compared, make it obvious which is found at path, and which is expected. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-11-12tcg plugins: expose an API version conceptAlex Bennée
This is a very simple versioning API which allows the plugin infrastructure to check the API a plugin was built against. We also expose a min/cur API version to the plugin via the info block in case it wants to avoid using old deprecated APIs in the future. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Robert Foley <robert.foley@linaro.org>
2019-11-12tests/vm: support sites with sha512 checksumsAlex Bennée
The NetBSD project uses SHA512 for its checksums so lets support that in the download helper. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-11-12tests: only run ipmi-bt-test if CONFIG_LINUXAlex Bennée
This test has been unstable on NetBSD for awhile. It seems the mechanism used to listen to a random port is a Linux-ism (although a received wisdom Linux-ism rather than a well documented one). As working around would add more hard to test complexity to the test I've gone for the easier option of making it CONFIG_LINUX only. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Corey Minyard <cminyard@mvista.com> Cc: Kamil Rytarowski <kamil@netbsd.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-31 15:46:19 +0000