| Age | Commit message (Collapse) | Author |
|---|
|
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. Do the bulk of
the conversion to "struct" in qapi schema, with a fairly
mechanical:
for f in `find -name '*.json'; do sed -i "s/'type'/'struct'/"; done
followed by manually filtering out the places where we have a
'type' embedded in 'data'. Then tweak a couple of tests whose
output changes slightly due to longer lines.
I also verified that the generated files for QMP and QGA (such
as qmp-commands.h) are the same before and after, as assurance
that I didn't leave in any accidental member name changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Referring to "type" as both a meta-type (built-in, enum, union,
alternate, or struct) and a specific type (the name that the
schema uses for declaring structs) is confusing. The confusion
is only made worse by the fact that the generator mostly already
refers to struct even when dealing with expr['type']. This
commit changes the generator to consistently refer to it as
struct everywhere, plus a single back-compat tweak that allows
accepting the existing .json files as-is, so that the meat of
this change is separate from the mindless churn of that change.
Fix the testsuite fallout for error messages that change, and
in some cases, become more legible. Improve comments to better
match our intentions where a struct (rather than any complex
type) is required. Note that in some cases, an error message
now refers to 'struct' while the schema still refers to 'type';
that will be cleaned up in the later commit to the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we have a way to validate every type, we can also be
stricter about enforcing that callers that want to bypass
type safety in generated code. Prior to this patch, it didn't
matter what value was associated with the key 'gen', but it
looked odd that 'gen':'yes' could result in bypassing the
generated code. These changes also enforce the changes made
earlier in the series for documentation and consolidation of
using '**' as the wildcard type, as well as 'gen':false as the
canonical spelling for requesting type bypass.
Note that 'gen':false is a one-way switch away from the default;
we do not support 'gen':true (similar for 'success-response').
In practice, this doesn't matter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
...or an array of dictionaries. Although we have to cater to
existing commands, returning a non-dictionary means the command
is not extensible (no new name/value pairs can be added if more
information must be returned in parallel). By making the
whitelist explicit, any new command that falls foul of this
practice will have to be self-documenting, which will encourage
developers to either justify the action or rework the design to
use a dictionary after all.
It's a little bit sloppy that we share a single whitelist among
three clients (it's too permissive for each). If this is a
problem, a future patch could tighten things by having the
generator take the whitelist as an argument (as in
scripts/qapi-commands.py --legacy-returns=...), or by having
the generator output C code that requires explicit use of the
whitelist (as in:
#ifndef FROBNICATE_LEGACY_RETURN_OK
# error Command 'frobnicate' should return a dictionary
#endif
then having the callers define appropriate macros). But until
we need such fine-grained separation (if ever), this patch does
the job just fine.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Previous commits demonstrated that the generator overlooked various
bad naming situations:
- types, commands, and events need a valid name
- enum members must be valid names, when combined with prefix
- union and alternate branches cannot be marked optional
Valid upstream names match [a-zA-Z][a-zA-Z0-9_-]*; valid downstream
names match __[a-zA-Z][a-zA-Z0-9._-]*. Enumerations match the
weaker [a-zA-Z0-9._-]+ (in part thanks to QKeyCode picking an enum
that starts with a digit, which we can't change now due to
backwards compatibility). Rather than call out three separate
regex, this patch just uses a broader combination that allows both
upstream and downstream names, as well as a small hack that
realizes that any enum name is merely a suffix to an already valid
name prefix (that is, any enum name is valid if prepending _ fits
the normal rules).
We could reject new enumeration names beginning with a digit by
whitelisting existing exceptions. We could also be stricter
about the distinction between upstream names (no leading
underscore, no use of dot) and downstream (mandatory leading
double underscore), but it is probably not worth the bother.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we know every expression is valid with regards to
its keys, we can add further tests that those keys refer to
valid types. With this patch, all uses of a type (the 'data':
of command, type, union, alternate, and event; the 'returns':
of command; the 'base': of type and union) must resolve to an
appropriate subset of metatypes declared by the current qapi
parse; this includes recursing into each member of a data
dictionary. Dealing with '**' and nested anonymous structs
will be done in later patches.
Update the testsuite to match improved output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator silently parses confusing
types, which may cause other errors later on. Later patches
will update the expected results as the generator is made stricter.
Most of the new tests focus on blatant errors. But
returns-whitelist is a case where we have historically allowed
returning something other than a JSON object from particular
commands; we have to keep that behavior to avoid breaking clients,
but it would be nicer to avoid adding such commands in the future,
because any return that is not an (array of) object cannot be
easily extended if future qemu wants to return additional
information. The QMP protocol already documents that clients
should ignore unknown dictionary keys, but does not require
clients to have to handle more than one type of JSON object.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
For a few QMP commands, we are forced to pass an arbitrary type
without tracking it properly in QAPI. Among the existing clients,
this unnamed type was spelled 'dict', 'visitor', and '**'; this
patch standardizes on '**', matching the documentation changes
earlier in the series.
Meanwhile, for the 'gen' key, we have been ignoring the value,
although the schema consistently used "'no'" ('success-response'
was hard-coded to checking for 'no'). But now that we can support
a literal "false" in the schema, we might as well use that rather
than ignoring the value or special-casing a random string. Note
that these are one-way switches (use of 'gen':true is not the same
as omitting 'gen'). Also, the use of '**' requires 'gen':false,
but the use of 'gen':false does not mandate the use of '**'.
There is no difference to the generated code. Add some tests on
what we'd like to guarantee, although it will take later patches
to clean up test results and actually enforce the use of a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In the near term, we will use it for a sensible-looking
'gen':false inside command declarations, instead of the
current ugly 'gen':'no'.
In the long term, it will allow conversion from shorthand
with defaults mentioned only in side-band documentation:
'data':{'*flag':'bool', '*string':'str'}
into an explicit default value documentation, as in:
'data':{'flag':{'type':'bool', 'optional':true, 'default':true},
'string':{'type':'str', 'optional':true, 'default':null}}
We still don't parse integer values (also necessary before
we can allow explicit defaults), but that can come in a later
series.
Update the testsuite to match an improved error message.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The previous commit demonstrated that the generator overlooked
duplicate expressions:
- a complex type or command reusing a built-in type name
- redeclaration of a type name, whether by the same or different
metatype
- redeclaration of a command or event
- collision of a type with implicit 'Kind' enum for a union
- collision with an implicit MAX enum constant
Since the c_type() function in the generator treats all names
as being in the same namespace, this patch adds a global array
to track all known names and their source, to prevent collisions
before it can cause further problems. While valid .json files
won't trigger any of these cases, we might as well be nicer to
developers that make a typo while trying to add new QAPI code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator doesn't deal very well with
redefined expressions. At the parse level, they are silently
accepted; and while the testsuite just stops at parsing, I've
further tested that many of them cause generator crashes or
invalid C code if they were appended to qapi-schema-test.json.
A later patch will tighten things up and adjust the testsuite
to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The previous commit demonstrated that the generator overlooked some
fairly basic broken expressions:
- missing metataype
- metatype key has a non-string value
- unknown key in relation to the metatype
- conflicting metatype (this patch treats the second metatype as an
unknown key of the first key visited, which is not necessarily the
first key the user typed)
Add check_keys to cover these situations, and update testcases to
match. A couple other tests (enum-missing-data, indented-expr) had
to change since the validation added here occurs so early.
Conversely, changes to ident-with-escape results show that we still
have problems where our handling of escape sequences differs from
true JSON, which will matter down the road if we allow arbitrary
default string values for optional parameters (but for now is not
too bad, as we currently can avoid unicode escaping as we don't
need to represent anything beyond C identifier material).
While valid .json files won't trigger any of these cases, we might
as well be nicer to developers that make a typo while trying to add
new QAPI code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator doesn't deal well with
expressions that aren't up to par. Later patches will improve
the expected results as the generator is made stricter. Only
a few of the the added tests actually behave sanely at
rejecting obvious problems or demonstrating success.
Note that in some cases, we reject bad QAPI merely because our
pseudo-JSON parser does not yet know how to parse numbers. This
series does not address that, but when a later series adds support
for numeric defaults of integer fields, the testsuite will ensure
that we don't lose the error (and hopefully that the error
message quality is improved).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Previous patches have led up to the point where I create the
new meta-type "'alternate':'Foo'". See the previous patches
for documentation; I intentionally split as much work into
earlier patches to minimize the size of this patch, but a lot
of it is churn due to testsuite fallout after updating to the
new type.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Reduce churn in the future patch that replaces anonymous unions
with a new metatype 'alternate' by changing 'AnonUnion' to
'Alternate'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Special-casing 'discriminator == {}' for handling anonymous unions
is getting awkward; since this particular type is not always a
dictionary on the wire, it is easier to treat it as a completely
different class of type, "alternate", so that if a type is listed
in the union_types array, we know it is not an anonymous union.
This patch just further segregates union handling, to make sure that
anonymous unions are not stored in union_types, and splitting up
check_union() into separate functions. A future patch will change
the qapi grammar, and having the segregation already in place will
make it easier to deal with the distinct meta-type.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Previous commits demonstrated that the generator had several
flaws with less-than-perfect unions:
- a simple union that listed the same branch twice (or two variant
names that map to the same C enumerator, including the implicit
MAX sentinel) ended up generating invalid C code
- an anonymous union that listed two branches with the same qtype
ended up generating invalid C code
- the generator crashed on anonymous union attempts to use an
array type
- the generator was silently ignoring a base type for anonymous
unions
- the generator allowed unknown types or nested anonymous unions
as a branch in an anonymous union
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
None of the existing QMP or QGA interfaces uses a union with a
base type but no discriminator; it is easier to avoid this in the
generator to save room for other future extensions more likely to
be useful. An earlier commit added a union-base-no-discriminator
test to ensure that we eventually give a decent error message;
likewise, removing UserDefUnion outright is okay, because we moved
all the tests we wish to keep into the tests of the simple union
UserDefNativeListUnion in the previous commit. Now is the time to
actually forbid simple union with base, and remove the last
vestiges from the testsuite.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The tests of UserDefNativeListUnion serve to validate code
generation of simple unions without a base type, except that it
did not have full coverage in the strict test. The next commits
will remove tests and support for simple unions with a base type,
so there is no real loss at repurposing that test here as
opposed to churn of adding a new test then deleting the old one.
Fix some indentation and long lines while at it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator doesn't deal well with unions
that aren't up to par. Later patches will update the expected
reseults as the generator is made stricter. A few tests work
as planned, but most show poor or missing error messages.
Of particular note, qapi-code-gen.txt documents 'base' only for
flat unions, but the tests here demonstrate that we currently allow
a 'base' to a simple union, although it is exercised only in the
testsuite. Later patches will remove this undocumented feature, to
give us more flexibility in adding other future extensions to union
types. For example, one possible extension is the idea of a
type-safe simple enum, where added fields tie the discriminator to
a user-defined enum type rather than creating an implicit enum from
the names in 'data'. But adding such safety on top of a simple
enum with a base type could look ambiguous with a flat enum;
besides, the documentation also mentions how any simple union can
be represented by an equivalent flat union. So it will be simpler
to just outlaw support for something we aren't using.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The previous commit demonstrated that the generator had several
flaws with less-than-perfect enums:
- an enum that listed the same string twice (or two variant
strings that map to the same C enumerator) ended up generating
an invalid C enum
- because the generator adds a _MAX terminator to each enum,
the use of an enum member 'max' can also cause this clash
- if an enum omits 'data', the generator left a python stack
trace rather than a graceful message
- an enum that used a non-array 'data' was silently accepted by
the parser
- an enum that used non-string members in the 'data' member
was silently accepted by the parser
Add check_enum to cover these situations, and update testcases
to match. While valid .json files won't trigger any of these
cases, we might as well be nicer to developers that make a typo
while trying to add new QAPI code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Demonstrate that the qapi generator doesn't deal well with enums
that aren't up to par. Later patches will update the expected
results as the generator is made stricter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We were missing the 'size' builtin type (which means that QAPI using
[ 'size' ] would fail to compile).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1427911244-22565-1-git-send-email-emaste@freebsd.org
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-7-git-send-email-jsnow@redhat.com
|
|
Pull this helper out of ide-test and into libqos,
to be shared with ahci-test.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-6-git-send-email-jsnow@redhat.com
|
|
Add qmp_async, which lets us send QMP commands asynchronously.
This is useful when we want to send commands that will trigger
event responses, but we don't know in what order to expect them.
Sometimes the event responses may arrive even before the command
confirmation will show up, so it is convenient to leave the responses
in the stream.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-5-git-send-email-jsnow@redhat.com
|
|
Allow the user to poll until a desired interrupt occurs.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-3-git-send-email-jsnow@redhat.com
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1426018503-821-2-git-send-email-jsnow@redhat.com
|
|
Test sector offset 0, 1, and the last sector(s)
in LBA28 and LBA48 modes.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
|
|
This will enable the testing of high offsets without
wasting a lot of disk space, and does not impact the
previous tests.
mkimg and mkqcow2 are added to libqos for other tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com
|
|
Test what happens if you fiddle with the granularity.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-22-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Test the failure case for incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-21-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-20-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
A filter is added to allow callers to request very specific
events to be pulled from the event queue, while leaving undesired
events still in the stream.
This allows us to poll for completion data for multiple asynchronous
events in any arbitrary order.
A new timeout context is added to the qmp pull_event method's
wait parameter to allow tests to fail if they do not complete
within some expected period of time.
Also fixed is a bug in qmp.pull_event where we try to retrieve an event
from an empty list if we attempt to retrieve an event with wait=False
but no events have occurred.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-19-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The general approach is to set bits close to the boundaries of
where we are truncating and ensure that everything appears to
have gone OK.
We test growing and shrinking by different amounts:
- Less than the granularity
- Less than the granularity, but across a boundary
- Less than sizeof(unsigned long)
- Less than sizeof(unsigned long), but across a ulong boundary
- More than sizeof(unsigned long)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-17-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a regression test for some problems that the qemu-img convert
rewrite just fixed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This is the first step towards having fine-grained critical sections in
dataplane threads, which resolves lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In recent qemu versions, it is possible to override the backing file
name and format that is stored in the image file with values given at
runtime. In such cases, the temporary override could end up in the
image header if the qcow2 header was updated, while obviously correct
behaviour would be to leave the on-disk backing file path/format
unchanged.
Fix this and add a test case for it.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1428411796-2852-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Replace g_test_add_func() with new qtest_add_func() and g_test_add()
macro with qtest_add() macro. This effectively changes GTester paths:
/i440fx/foo -> /x86_64/i440fx/foo etc.
Cc: qemu-stable@nongnu.org
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
It extends g_test_add() macro with the architecture path.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
It calls g_test_add_data_func() with a path supplemented by the
architecture, like qtest_add_func() does.
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Use qtest_add_func() instead of g_test_add_func() to reflect
the architecture tested, changing GTester paths as follows:
/fw_cfg/foo -> /x86_64/fw_cfg/foo etc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1427160230-4489-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Add a space after comma.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1427374663-10168-1-git-send-email-arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
32-bit PPC cannot do atomic operations on long long. Inside the loops,
we are already using local counters that are summed at the end of
the run---with some exceptions (rcu_stress_count for rcutorture,
n_nodes for test-rcu-list): fix them to use the same technique.
For test-rcu-list, remove the mostly unused member "val" from the
list. Then, use a mutex to protect the global counts.
Performance does not matter there because every thread will only enter
the critical section once.
Remaining uses of atomic instructions are for ints or pointers.
Reported-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
