aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2016-02-06vhost-user-test: use correct ROM to speed up and avoid spurious failuresPaolo Bonzini
The mechanism to get the option ROM for virtio-net does not block the PCI ROM from being loaded. Therefore, in vhost-user-test there are two entries in the boot menu for the virtio-net card: one as an embedded option ROM, one from the ROM BAR. The embedded option ROM in vhost-user-test is the non-EFI-enabled, while the ROM BAR has an EFI-enabled ROM. The two are compiled with slightly different parameters, where only the old BIOS-only one doesn't have a timeout for the "Press Ctrl-B" banner. When using a new machine type, therefore, the vhost-user-test has to wait for the EFI-enabled ROM's banner to go away. There are several ways to fix this: 1) fix the ROMs to have the same configuration 2) add ",romfile=" to the -device line 3) remove --option-rom and add the ROM file name to the -device line 4) use an old machine type This patch chooses 3. In addition, the file name was wrong because qtest runs QEMU relative to the top build directory, not to the x86_64-softmmu/ subdirectory, which is fixed too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-04tests: pc: acpi: add expected DSDT.bridge blobs and update DSDT blobsIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-04tests: pc: acpi: drop not needed 'expected SSDT' blobsIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-02block: qemu-iotests - add test for snapshot, commit, snapshot bugJeff Cody
Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 2dbc05efba2f683cb3aaf71aaa9b776ebf7ec57c.1454376655.git.jcody@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> [Moved test number from 143 to 144] Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02iotests: Add "qemu-img map" test for VMDK extentsFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-17-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02iotests: Add test for block jobs and BDS ejectionMax Reitz
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Add test for multiple BB on BDS treeMax Reitz
This adds a test for having multiple BlockBackends in one BDS tree. In this case, there is one BB for the protocol BDS and one BB for the format BDS in a simple two-BDS tree (with the protocol BDS and BB added first). When bdrv_close_all() is executed, no cached data from any BDS should be lost; the protocol BDS may not be closed until the format BDS is closed. Otherwise, metadata updates may be lost. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Add test for eject under NBD serverMax Reitz
This patch adds a test for ejecting the BlockBackend an NBD server is connected to (the NBD server is supposed to stop). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Add test for a nonexistent NBD exportMax Reitz
Trying to connect to a nonexistent NBD export should not crash the server. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Make redirecting qemu's stderr optionalMax Reitz
Redirecting qemu's stderr to stdout makes working with the stderr output difficult due to the other file descriptor magic performed in _launch_qemu ("ambiguous redirect"). Add an option which specifies whether stderr should be redirected to stdout or not (allowing for other modes to be added in the future). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Make _filter_nbd support more URL typesMax Reitz
This function should support URLs of the "nbd://" format (without swallowing the export name), and for "nbd:///" URLs it should replace "?socket=$TEST_DIR" by "?socket=TEST_DIR" because putting the Unix socket files into the test directory makes sense. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Make _filter_nbd drop log linesMax Reitz
The NBD log lines ("/your/source/dir/nbd/xyz.c:function():line: error") should not be converted to empty lines but removed altogether. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Move _filter_nbd into common.filterMax Reitz
_filter_nbd can be useful for other NBD tests, too, therefore it should reside in common.filter. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Change coding style of _filter_nbd in 083Max Reitz
In order to be able to move _filter_nbd to common.filter in the next patch, its coding style needs to be adapted to that of common.filter. That means, we have to convert tabs to four spaces, adjust the alignment of the last line (done with spaces already, assuming one tab equals eight spaces), fix the line length of the comment, and add a line break before the opening brace. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Rename filter_nbd to _filter_nbd in 083Max Reitz
In the patch after the next, this function is moved to common.filter. Therefore, its name should be preceded by an underscore to signify its global availability. To keep the code motion patch clean, we cannot rename it in the same patch, so we need to choose some order of renaming vs. motion. It is better to keep a supposedly global function used by only a single test in that test than to keep a supposedly local function in a common* file and use it from a test, so we should rename the function before moving it. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02iotests: Limit supported formats for 118Max Reitz
Image formats used in test 118 need to support image creation. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02block/qapi: Emit tray_open only if there is a trayMax Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1454096953-31773-5-git-send-email-mreitz@redhat.com
2016-02-02Revert "hw/block/fdc: Implement tray status"Max Reitz
This reverts the changes that commit 2e1280e8ff95b3145bc6262accc9d447718e5318 applied to hw/block/fdc.c; also, an additional case of drv->media_inserted use has crept in since, which is replaced by a call to blk_is_inserted(). That commit changed tests/fdc-test.c, too, because after it, one less TRAY_MOVED event would be emitted when executing 'change' on an empty drive. However, now, no TRAY_MOVED events will be emitted at all, and the tray_open status returned by query-block will always be false, necessitating (different) changes to tests/fdc-test.c and iotest 118, which is why this patch is not a pure revert of said commit. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 1454096953-31773-4-git-send-email-mreitz@redhat.com Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-02ivshmem-test: test both msi & irq casesMarc-André Lureau
Recent commit 660c97ee introduced a regression in irq case, make sure this code path is also tested. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-02-02libqos: remove some leaksMarc-André Lureau
qpci_device_find() returns allocated data, don't leak it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-02-02ivshmem-test: leak fixesMarc-André Lureau
Add a cleanup_vm() function to free QPCIDevice & QPCIBus when cleaning up the IVState. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-01-29usb: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-20-git-send-email-peter.maydell@linaro.org
2016-01-299pfs: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-18-git-send-email-peter.maydell@linaro.org
2016-01-29ide: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2016-01-26Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* chardev support for TLS and leak fix * NBD fix from Denis * condvar fix from Dave * kvm_stat and dump-guest-memory almost rewrite * mem-prealloc fix from Luiz * manpage style improvement # gpg: Signature made Tue 26 Jan 2016 14:58:18 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (49 commits) scripts/dump-guest-memory.py: Fix module docstring scripts/dump-guest-memory.py: Introduce multi-arch support scripts/dump-guest-memory.py: Cleanup functions scripts/dump-guest-memory.py: Improve python 3 compatibility scripts/dump-guest-memory.py: Make methods functions scripts/dump-guest-memory.py: Move constants to the top nbd: add missed aio_context_acquire in nbd_export_new memory: exit when hugepage allocation fails if mem-prealloc cpus: use broadcast on qemu_pause_cond scripts/kvm/kvm_stat: Add optparse description scripts/kvm/kvm_stat: Add interactive filtering scripts/kvm/kvm_stat: Fixup filtering scripts/kvm/kvm_stat: Fix rlimit for unprivileged users scripts/kvm/kvm_stat: Read event values as u64 scripts/kvm/kvm_stat: Cleanup and pre-init perf_event_attr scripts/kvm/kvm_stat: Fix output formatting scripts/kvm/kvm_stat: Make tui function a class scripts/kvm/kvm_stat: Remove unneeded X86_EXIT_REASONS scripts/kvm/kvm_stat: Group arch specific data scripts/kvm/kvm_stat: Cleanup of Event class ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-26char: convert from GIOChannel to QIOChannelDaniel P. Berrange
In preparation for introducing TLS support to the TCP chardev backend, convert existing chardev code from using GIOChannel to QIOChannel. This simplifies the chardev code by removing most of the OS platform conditional code for dealing with file descriptor passing. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453202071-10289-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-25qtest/fdc: Support for 2.88MB drivesJohn Snow
The old test assumes a 1.44MB drive. Assert that the QEMU default drive is now either 1.44 or 2.88. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1453495865-9649-12-git-send-email-jsnow@redhat.com
2016-01-22fpu: Replace uint32 typedef with uint32_tPeter Maydell
Replace the uint32 softfloat-specific typedef with uint32_t. This change was made with find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g' together with manual removal of the typedef definition, manual undoing of various mis-hits, and another couple of fixes found via test compilation. All the uses in hw/ were using the wrong type by mistake. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
2016-01-20iotests: Test that throttle values rangesFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20qcow2: Write full header on image creationKevin Wolf
When creating a qcow2 image, we didn't necessarily call qcow2_update_header(), but could end up with the basic header that qcow2_create2() created manually. One thing that this basic header lacks is the feature table. Let's make sure that it's always present. This requires a few updates to test cases as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qcow2: Write feature table only for v3 imagesKevin Wolf
Version 2 images don't have feature bits, so writing a feature table to those images is kind of pointless. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20qemu-iotests: Reduce racy output in 028Eric Blake
On my machine, './check -qcow2 028' was failing about 80% of the time, due to a race in how many times the repeated attempts to run 'info block-jobs' could occur before the job was done, showing up as a failure of fewer '(qemu) ' prompts than in the expected output. Silence the output during the repetitions, then add a final clean command to keep the expected output useful; once patched, I was finally able to run the test 20 times in a row with no failures. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-18qom: Change object property iterator API contractDaniel P. Berrange
Currently the ObjectProperty iterator API works as follows: ObjectPropertyIterator *iter; iter = object_property_iter_init(obj); while ((prop = object_property_iter_next(iter))) { ... } object_property_iter_free(iter); This has the benefit that the ObjectPropertyIterator struct can be opaque, but has the downside that callers need to explicitly call a free function. It is also not in keeping with iterator style used elsewhere in QEMU/GLib2. This patch changes the API to use stack allocation instead: ObjectPropertyIterator iter; object_property_iter_init(&iter, obj); while ((prop = object_property_iter_next(&iter))) { ... } Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [AF: Fused ObjectPropertyIterator struct with typedef] Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-18qom: Allow properties to be registered against classesDaniel P. Berrange
When there are many instances of a given class, registering properties against the instance is wasteful of resources. The majority of objects have a statically defined list of possible properties, so most of the properties are easily registerable against the class. Only those properties which are conditionally registered at runtime need be recorded against the klass. Registering properties against classes also makes it possible to provide static introspection of QOM - currently introspection is only possible after creating an instance of a class, which severely limits its usefulness. This impl only supports simple scalar properties. It does not attempt to allow child object / link object properties against the class. There are ways to support those too, but it would make this patch more complicated, so it is left as an exercise for the future. There is no equivalent to object_property_del() provided, since classes must be immutable once they are defined. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-15nbd: Split nbd.cFam Zheng
We have NBD server code and client code, all mixed in a file. Now split them into separate files under nbd/, and update MAINTAINERS. filter_nbd for iotest 083 is updated to keep the log filtered out. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1452760863-25350-3-git-send-email-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-13error: Consistently name Error * objects err, and not errpMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13vhdx: Fix "log that needs to be replayed" error messageMarkus Armbruster
The arguments of error_setg_errno() should yield a short error string without newlines. Here, we try to append additional help to the error message by embedding newlines in the error string. That's nice, but it's doesn't play nicely with the errno part. tests/qemu-iotests/070.out shows the resulting mess: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed. To replay the log, execute: qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx': Operation not permitted Switch to error_setg() and error_append_hint(). Result: can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed To replay the log, run: qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-21-git-send-email-armbru@redhat.com>
2016-01-13vmdk: Clean up "Invalid extent lines" error messageMarkus Armbruster
vmdk_parse_extents() reports parse errors like this: error_setg(errp, "Invalid extent lines:\n%s", p); where p points to the beginning of the malformed line in the image descriptor. This results in a multi-line error message Invalid extent lines: <first line that doesn't parse> <remaining text that may or may not parse, if any> Error messages should not have newlines embedded. Since the remaining text is not helpful, we can simply report: Invalid extent line: <first line that doesn't parse> Cc: Fam Zheng <famz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-19-git-send-email-armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2016-01-13qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()Markus Armbruster
Just three instances left. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-16-git-send-email-armbru@redhat.com>
2016-01-13error: Use error_reportf_err() where it makes obvious senseMarkus Armbruster
Done with this Coccinelle semantic patch @@ expression FMT, E, S; expression list ARGS; @@ - error_report(FMT, ARGS, error_get_pretty(E)); + error_reportf_err(E, FMT/*@@@*/, ARGS); ( - error_free(E); | exit(S); | abort(); ) followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping, because I can't figure out how to make Coccinelle transform strings. We now use the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Don't decorate original error message when adding to itMarkus Armbruster
Prepend the additional information, colon, space to the original message without enclosing it in parenthesis or quotes, like we do elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-11-git-send-email-armbru@redhat.com>
2016-01-13test-throttle: Simplify qemu_init_main_loop() error handlingMarkus Armbruster
The code looks like it tries to check for both qemu_init_main_loop() and qemu_get_aio_context() failure in one conditional. In fact, qemu_get_aio_context() can fail only after qemu_init_main_loop() failed. Simplify accordingly: check for qemu_init_main_loop() error directly, without bothering to improve its error message. Call qemu_get_aio_context() only when qemu_get_aio_context() succeeded. It can't fail then, so no need to check. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-9-git-send-email-armbru@redhat.com>
2016-01-11libqos/ahci: organize headerJohn Snow
Organize the prototypes into nice little sections. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-10-git-send-email-jsnow@redhat.com
2016-01-11qtest/ahci: ATAPI data testsJohn Snow
Simple I/O tests for DMA and PIO pathways in the AHCI HBA. I believe at this point in time all of the common, major IO pathways in BMDMA and AHCI are covered by qtests now. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-9-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: add ahci_execJohn Snow
add ahci_exec, which is a standard purpose flexible command dispatcher and tester for the AHCI device. The intent is to eventually cut down on the absurd amount of boilerplate inside of the AHCI qtest. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-8-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: allow nondata commands for ahci_io variantsJohn Snow
These variants try to set a data offset, even if you don't specify one. In the cases where the offset is zero and it's a nondata command, just ignore the instruction. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-7-git-send-email-jsnow@redhat.com
2016-01-11libqos: allow zero-size allocationsJohn Snow
As part of streamlining the AHCI tests interface, it'd be nice if specying a size of zero could be handled without special branches and the allocator could handle this special case gracefully. This lets me use the "ahci_io" macros for non-data commands, too, which moves me forward towards shepherding all AHCI qtests into a common set of commands in a unified pipeline. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-6-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: Switch to mutable propertiesJohn Snow
ATAPI commands are, unfortunately, weird in that they can be either DMA or PIO depending on a header bit. In order to accommodate them, I'll need to make AHCI command properties mutable so we can toggle between which "flavor" of ATAPI command we want to test. The default ATAPI transfer mechanism is PIO and the default properties are adjusted accordingly. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-5-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: ATAPI identifyJohn Snow
We need to say "hello!" to our ATAPI friends in a slightly different manner. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-4-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: ATAPI supportJohn Snow
Add pathways to tolerate ATAPI commands. Notably, unlike ATA, each SCSI command's layout is a little different, so support will have to be patched in for each command as we want to test them in e.g. ahci_command_set_sizes and ahci_command_set_offset. For now, I'm adding support for 0x28, READ (10). [Maintainer edit: replaced type-punning with stl_be_p(). --js] Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-3-git-send-email-jsnow@redhat.com
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 06:38:40 +0000