| Age | Commit message (Collapse) | Author |
|---|
|
As default a guest has always one floppy drive so 0x10 byte in CMOS
has to have 0x40 value. Higher 4 bits means that the first floppy drive
is 1.44 Mb 3"5 drive and lower 4 bits means the second drive is not present.
After the guest starts DSKCHG bit in DIR register should be set. If there
is no media in drive, this bit should be set all the time.
Because we start the guest without media in drive, we have to swap
'eject' and 'change' in 'test_media_change'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commit 93e9eb6808c886f5f1c903b7ced1eed65de2ba39 added fdc-test,
but accidentally removed rtc-test because check-qtest-i386-y was
not enhanced but set twice.
This patch adds rtc-test again (and sorts both tests alphabetically).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
|
|
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The test on sectors not allocated can fail if the L1/L2 tables are
not on disk yet. Allow tests to shutdown the VM early.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Let's start with testing media change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A trailing space is left when qemu-img has no arguments, for example if
-nocache is not used. This becomes an empty argument after split()
and causes qemu-io to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This test case manages to let qcow2 abort because its cache is used up
and it can't find free cache entries for new requests any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed. The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later. If the parameter has an invalid
value we expect to get an error and the job is not created.
It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
After adding GCC_FMT_ATTR to qtest_sendf, more format errors are reported
by the compiler. These are fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* origin/master:
qtest: fix memread and memwrite on 32 bit hosts
|
|
* qmp/queue/qmp:
qapi: g_hash_table_find() instead of GHashTableIter.
qmp: make block job command naming consistent
|
|
Use PRIx64 to print 64 bit values to avoid truncation
on 32 bit hosts.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* kwolf/for-anthony: (38 commits)
qemu-iotests: Fix test 031 for qcow2 v3 support
qemu-iotests: Add -o and make v3 the default for qcow2
qcow2: Zero write support
qemu-iotests: Test backing file COW with zero clusters
qemu-iotests: add a simple test for write_zeroes
qcow2: Support for feature table header extension
qcow2: Support reading zero clusters
qcow2: Version 3 images
qcow2: Ignore reserved bits in check_refcounts
qcow2: Ignore reserved bits in refcount table entries
qcow2: Simplify count_cow_clusters
qcow2: Refactor qcow2_free_any_clusters
qcow2: Ignore reserved bits in L1/L2 entries
qcow2: Fail write_compressed when overwriting data
qcow2: Ignore reserved bits in count_contiguous_clusters()
qcow2: Ignore reserved bits in get_cluster_offset
qcow2: Save disk size in snapshot header
Specification for qcow2 version 3
qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at()
iotests: Resolve test failures caused by hostname
...
|
|
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
|
|
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Add simple m48t59 qtests, enable test only for Sparc32
and Sparc64. On PPC, the device is behind PCI bus.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
qcow2.py must be updated to work with version 3 images at all, the
output has changed since the feature table extension has been added, and
version 2 and version 3 images can't possibly have the same test output.
Change the test case to completely ignore IMGOPTS and run the test for
both compat=1.1 and compat=0.10 regardless of the ./check command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The new autotests in tests/ generate a number of files, both
executable and source, which are not caught by the existing .gitignore
files. This patch adds a new .gitignore in tests/ which covers these.
[Changed 'rtc-test' to '*-test' so future tests do not need to be added
to .gitignore on a case-by-case basis. Stefan]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
`hostname -s` may output an errror:
hostname: Name or service not known
This causes all tests to fail for `make check-block`.
Suppress such error messages, letting the tests succeed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
According comment, we should not read again, we will write.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the BlockDriverState is closed/freed without draining the AIO
requests first, the request coroutines may work on invalid data and file
descriptors or have some dangling pointers that cause segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The special target should not be needed anymore, and caused (perhaps
due to a Make bug) a failure with "make -j2". In any case, the
main makefile is a better place for such special targets rather
than an included makefile.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
- add testcase announcement;
- add global symbols for individual tests;
- add host-debug-* makefile target.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
qemu-io requires options first, then fixed parameters.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The immportant thing here is that header extensions don't get silently
dropped when the header is rewritten, e.g. during a rebase.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a tool that is meant to inspect and edit qcow2 files in a
low-level way, that wouldn't be possible with qemu-img/io, for example
by adding yet unknown extensions or flags. This way we can test whether
qemu deals properly with future backwards compatible extensions.
For now, let's start with the image header and header extensions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Michael Walle <michael@walle.cc>
|
|
Avoid this warning on OpenBSD:
CC tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
