aboutsummaryrefslogtreecommitdiff
path: root/tests/test-qga.c
AgeCommit message (Collapse)Author
2020-09-08meson: convert the unit testsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200828110734.1638685-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-03libqtest: Rename qmp_assert_error_class() to qmp_expect_error_and_unref()Markus Armbruster
qmp_assert_error_class() does more than just assert: it also unrefs the @rsp argument. Rename to qmp_expect_error_and_unref() to reduce confusion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200902115733.1229537-1-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-08-21meson: convert tests/qtest to mesonPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: convert qemu-gaPaolo Bonzini
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17tests: use g_test_rand_intPaolo Bonzini
g_test_rand_int provides a reproducible random integer number, using a different number seed every time but allowing reproduction using the --seed command line option. It is thus better suited to tests than g_random_int or random. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-28qmp-dispatch: Use CommandNotFound error for disabled commandsMichal Privoznik
If a command is disabled an error is reported. But due to usage of error_setg() the class of the error is GenericError which does not help callers in distinguishing this case from a case where a qmp command fails regularly due to other reasons. We used to use class CommandDisabled until the great error simplification (commit de253f1491 for QMP and commit 93b91c59db for qemu-ga, both v1.2.0). Use CommandNotFound error class, which is close enough. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Test update squashed in, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-03-18qmp: common 'id' handling & make QGA conform to QMP specMarc-André Lureau
Let qmp_dispatch() copy the 'id' field. That way any qmp client will conform to the specification, including QGA. Furthermore, it simplifies the work for qemu monitor. CC: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-08-31tests: add qmp_assert_error_class()Marc-André Lureau
This helper will simplify a bunch of code checking for QMP errors and can be shared by various tests. Note that test-qga does check for error description as well, so don't replace the code there for now. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-24test-qga: Clean up how we test QGA synchronizationMarkus Armbruster
To permit recovering from arbitrary JSON parse errors, the JSON parser resets itself on lexical errors. We recommend sending a 0xff byte for that purpose, and test-qga covers this usage since commit 5229564b832. That commit had to add an ugly hack to qmp_fd_vsend() to make capable of sending this byte (it's designed to send only valid JSON). The previous commit added a way to send arbitrary text. Put that to use for this purpose, and drop the hack from qmp_fd_vsend(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-8-armbru@redhat.com>
2018-08-16tests: Clean up string interpolation into QMP input (simple cases)Markus Armbruster
When you build QMP input manually like this cmd = g_strdup_printf("{ 'execute': 'migrate'," "'arguments': { 'uri': '%s' } }", uri); rsp = qmp(cmd); g_free(cmd); you're responsible for escaping the interpolated values for JSON. Not done here, and therefore works only for sufficiently nice @uri. For instance, if @uri contained a single "'", qobject_from_vjsonf_nofail() would abort. A sufficiently nasty @uri could even inject unwanted members into the arguments object. Leaving interpolation into JSON to qmp() is more robust: rsp = qmp("{ 'execute': 'migrate', 'arguments': { 'uri': %s } }", uri); It's also more concise. Clean up the simple cases where we interpolate exactly a JSON value. Bonus: gets rid of non-literal format strings. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-13-armbru@redhat.com>
2018-07-05Merge remote-tracking branch ↵Peter Maydell
'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging Monitor patches for 2018-07-03 # gpg: Signature made Tue 03 Jul 2018 22:20:13 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits) qapi: Polish command flags documentation in qapi-code-gen.txt monitor: Improve some comments qmp: Clean up capability negotiation after commit 02130314d8c qobject: Let qobject_from_jsonf() fail instead of abort qmp: Switch timestamp_put() to qdict_from_jsonf_nofail() qmp: Add some comments around null responses qmp: Simplify monitor_qmp_respond() qmp: Replace get_qmp_greeting() by qmp_greeting() qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response() qmp: Use QDict * instead of QObject * for response objects qmp: De-duplicate error response building qobject: New qdict_from_jsonf_nofail() monitor: Peel off @mon_global wrapper monitor: Rename use_io_thr to use_io_thread qmp: Don't let JSON errors jump the queue qmp: Don't let malformed in-band commands jump the queue tests/qmp-test: Demonstrate QMP errors jumping the queue qmp: Simplify code around monitor_qmp_dispatch_one() qmp: Always free QMPRequest with qmp_request_free() qmp: Revert change to handle_qmp_command tracepoint ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03qmp: Redo how the client requests out-of-band executionMarkus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" added a general mechanism for command-independent arguments just for an out-of-band flag: The "control" key is introduced to store this extra flag. "control" field is used to store arguments that are shared by all the commands, rather than command specific arguments. Let "run-oob" be the first. However, it failed to reject unknown members of "control". For instance, in QMP command {"execute": "query-name", "id": 42, "control": {"crap": true}} "crap" gets silently ignored. Instead of fixing this, revert the general "control" mechanism (because YAGNI), and do it the way I initially proposed, with key "exec-oob". Simpler code, simpler interface. An out-of-band command {"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}} becomes {"exec-oob": "migrate-pause", "id": 42} Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-13-armbru@redhat.com> [Commit message typo fixed]
2018-07-03qmp qemu-ga: Fix qemu-ga not to accept "control"Markus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" accidentally made qemu-ga accept and ignore "control". Fix that. Out-of-band execution in a monitor that doesn't support it now fails with {"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}} instead of {"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}} The old description is suboptimal when out-of-band cannot not be enabled, or the command doesn't support out-of-band execution. The new description is a bit unspecific, but it'll do. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-12-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "control"Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-11-armbru@redhat.com>
2018-07-03qmp qemu-ga: Revert change that accidentally made qemu-ga accept "id"Markus Armbruster
Commit cf869d53172 "qmp: support out-of-band (oob) execution" changed how we check "id": Note that in the patch I exported qmp_dispatch_check_obj() to be used to check the request earlier, and at the same time allowed "id" field to be there since actually we always allow that. The part after "and" is ill-advised: it makes qemu-ga accept and ignore "id". Revert. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-10-armbru@redhat.com>
2018-07-03tests/test-qga: Demonstrate the guest-agent ignores "id"Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-9-armbru@redhat.com>
2018-07-03test-qga: add trivial tests for some commandsTomáš Golembiovský
These commands did not get their tests in the original commits: - guest-get-host-name - guest-get-timezone - guest-get-users Trivial tests that mostly only call the commands were added. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> * replace QDECREF() with qobject_unref() Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-06-29glib: enforce the minimum required version and warn about old APIsDaniel P. Berrangé
There are two useful macros that can be defined before including glib.h that are related to the min required glib version - GLIB_VERSION_MIN_REQUIRED When this is defined, if code uses an API that was deprecated in this version, or older, a compiler warning will be emitted. This alerts maintainers to update their code to whatever new replacement API is now recommended best practice. - GLIB_VERSION_MAX_ALLOWED When this is defined, if code uses an API that was introduced in a version that is newer than the declared version, a compiler warning will be emitted. This alerts maintainers if new code accidentally uses functionality that won't be available on some supported platforms. The GLIB_VERSION_MAX_ALLOWED constant makes it a bit harder to opt in to using specific new APIs with a GLIB_CHECK_VERSION conditional. To workaround this Pragmas can be used to temporarily turn off the -Wdeprecated-declarations compiler warning, while a static inline compat function is implemented. This workaround is illustrated with the implementation of the g_strv_contains method to satisfy the test suite. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-03-19qapi: Replace qobject_to_X(o) by qobject_to(X, o)Max Reitz
This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Include qapi/qmp/qlist.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qlist.h drop from 4551 (out of 4743) to 16 in my "build everything" tree. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-12-armbru@redhat.com>
2017-09-15test-qga: Kill broken and dead QGA_TEST_SIDE_EFFECTING codeEric Blake
Back when the test was introduced, in commit 62c39b307, the test was set up to run qemu-ga directly on the host performing the test, and defaults to limiting itself to safe commands. At the time, it was envisioned that setting QGA_TEST_SIDE_EFFECTING in the environment could cover a few more commands, while noting the potential danger of those side effects running in the host. But this has NEVER been tested: if you enable the environment variable, the test WILL fail. One obvious reason: if you are not running as root, you'll probably get a permission failure when trying to freeze the file systems, or when changing system time. Less obvious: if you run the test as root (wow, you're brave), you could end up hanging if the test tries to log things to a temporarily frozen filesystem. But the cutest reason of all: if you get past the above hurdles, the test uses invalid JSON in test_qga_fstrim() (missing '' around the dictionary key 'minimum'), and will thus fail an assertion in qmp_fd(). Rather than leave this untested time-bomb in place, rip it out. Hopefully, as originally envisioned, we can find an opportunity to test an actual sandboxed guest where the guest-agent has full permissions and will not unduly affect the host running the test - if so, 'git revert' can be used if desired, for salvaging any useful parts of this attempt. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-07-18test-qga: add test for guest-get-osinfoTomáš Golembiovský
Add test for guest-get-osinfo command. Qemu-ga was modified to accept QGA_OS_RELEASE environment variable. If the variable is defined it is interpreted as path to the os-release file and it is parsed instead of the default paths. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> * move declarations to beginning of functions Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-18test-qga: pass environemnt to qemu-gaTomáš Golembiovský
Modify fixture_setup() to pass environemnt variables to spawned qemu-ga instance. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-05-09test-qga: Actually test 0xff sync bytesEric Blake
Commit 62c39b3 introduced test-qga, and at face value, appears to be testing the 'guest-sync' behavior that is recommended for guests in sending 0xff to QGA to force the parser to reset. But this aspect of the test has never actually done anything: the qmp_fd() call chain converts its string argument into QObject, then converts that QObject back to the actual string that is sent over the wire - and the conversion process silently drops the 0xff byte from the string sent to QGA, thus never resetting the QGA parser. An upcoming patch will get rid of the wasteful round trip through QObject, at which point the string in test-qga will be directly sent over the wire. But fixing qmp_fd() to actually send 0xff over the wire is not all we have to do - the actual QMP parser loudly complains that 0xff is not valid JSON, and sends an error message _prior_ to actually parsing the 'guest-sync' or 'guest-sync-delimited' command. With 'guest-sync', we cannot easily tell if this error message is a result of our command - which is WHY we invented the 'guest-sync-delimited' command. So for the testsuite, fix things to only check 0xff behavior on 'guest-sync-delimited', and to loop until we've consumed all garbage prior to the requested delimiter, which is compatible with the documented actions that a real QGA client is supposed to do. Ideally, we'd fix the QGA JSON parser to silently ignore 0xff rather than sending an error message back, at which point we could enhance this test for 'guest-sync' as well as for 'guest-sync-delimited'. But for the sake of this patch, our testing of 'guest-sync' is no worse than it was pre-patch, because we have never been sending 0xff over the wire in the first place. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-11-eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [Additional comment squashed in, along with matching commit message update] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-03-07Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2017-03-06-tag' ↵Peter Maydell
into staging qemu-ga patch queue for 2.9 * fix fsfreeze for filesystems mounted in multiple locations * fix test failure when running in a chroot * support for socket-based activation # gpg: Signature made Mon 06 Mar 2017 07:54:17 GMT # gpg: using RSA key 0x3353C9CEF108B584 # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" # gpg: aka "Michael Roth <mdroth@utexas.edu>" # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * remotes/mdroth/tags/qga-pull-2017-03-06-tag: tests: check path to avoid a failing qga/get-vcpus test qga: ignore EBUSY when freezing a filesystem qga: add systemd socket activation support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-06tests: check path to avoid a failing qga/get-vcpus testBruce Rogers
The qga/get-vcpus test fails in a simple chroot environment, as used in an openSUSE Build Service local build, so first check that the sysfs based path exists in order to avoid calling this test in an environment where it won't work right. Signed-off-by: Bruce Rogers <brogers@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-03-05qapi: Improve a QObject input visitor error messageMarkus Armbruster
The QObject input visitor has three error message formats: * Parameter '%s' is missing * "Invalid parameter type for '%s', expected: %s" * "QMP input object member '%s' is unexpected" The '%s' are member names (or "null", but I'll fix that later). The last error message calls the thing "QMP input object member" instead of "parameter". Misleading when the visitor is used on QObjects that don't come from QMP. Change it to "Parameter '%s' is unexpected". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-12-git-send-email-armbru@redhat.com>
2016-12-05test-qga: Avoid qobject_from_jsonv("%"PRId64)Eric Blake
The qobject_from_jsonv() function implements a pseudo-printf language for creating a QObject; however, it is hard-coded to only parse a subset of formats understood by -Wformat, and is not a straight synonym to bare printf(). In particular, any use of an int64_t integer works only if the system's definition of PRId64 matches what the parser expects; which works on glibc (%lld or %ld depending on 32- vs. 64-bit) and mingw (%I64d), but not on Mac OS (%qd). Rather than enhance the parser, it is just as easy to use normal printf() for this particular conversion, matching what is done elsewhere in this file [1], which is safe in this instance because the format does not contain any of the problematic differences (bare '%' or the '%s' format). The use of PRId64 for a variable named 'pid' is gross, but it is a sad reality of the 64-bit mingw environment, which mistakenly defines pid_t as a 64-bit type even though getpid() returns 'int' on that platform [2]. Our definition of the QGA GuestExec type defines 'pid' as a 64-bit entity, and we can't tighten it to 'int32' unless the mingw header is fixed. Using 'long long' instead of 'int64_t' just so that we can stick with qobject_from_jsonv("%lld") instead of printf() is not any prettier, since we may have later type churn anyways. [1] see 'git grep -A2 strdup_printf tests/test-qga.c' [2] https://bugzilla.redhat.com/show_bug.cgi?id=1397787 Reported by: G 3 <programmingkidx@gmail.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1479922617-4400-3-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19tests: add a test to check invalid argsMarc-André Lureau
Check that invalid args on commands without arguments returns an error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-15-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-08tests: fix test-qga leaksMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-25tests: use static qga config fileMarc-André Lureau
Do not create a leaking temporary file, but use a static file instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-07tests: start a /qga/guest-exec testMarc-André Lureau
Test a few guest-exec guest agent commands, added in qemu 2.5. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-07tests: Remove unnecessary glib.h includesPeter Maydell
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-02-25qga: Support enum names in guest-file-seekEric Blake
Magic constants are a pain to use, especially when we run the risk that our choice of '1' for QGA_SEEK_CUR might differ from the host or guest's choice of SEEK_CUR. Better is to use an enum value, via a qapi alternate type for back-compatibility. With this, {"command":"guest-file-seek", "arguments":{"handle":1, "offset":0, "whence":"cur"}} becomes a synonym for the older {"command":"guest-file-seek", "arguments":{"handle":1, "offset":0, "whence":1}} Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-02-16tests: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2015-11-25qga: Better mapping of SEEK_* in guest-file-seekEric Blake
Exposing OS-specific SEEK_ constants in our qapi was a mistake (if the host has SEEK_CUR as 1, but the guest has it as 2, then the semantics are unclear what should happen); if we had a time machine, we would instead expose only a symbolic enum. It's too late to change the fact that we have an integer in qapi, but we can at least document what mapping we want to enforce for all qga clients (and luckily, it happens to be the mapping that both Linux and Windows use); then fix the code to match that mapping. It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE. In the future, we may wish to move our QGA_SEEK_* constants into qga/qapi-schema.json, along with updating the schema to take an alternate type (either the integer, or the string value of the enum name) - but that's too much risk during hard freeze. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-11-25tests: add file-write-read testMarc-André Lureau
This test exhibits a POSIX behaviour regarding switching between write and read. It's undefined result if the application doesn't ensure a flush between the two operations (with glibc, the flush can be implicit when the buffer size is relatively small). The previous commit fixes this test. Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1210246 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-23tests: test-qga, loosen assumptions about host filesystemsMichael Roth
QGA skips pseudo-filesystems when querying filesystems via guest-get-fsinfo. On some hosts, such as travis-ci which uses containers with simfs filesystems, QGA might not report *any* filesystems. Our test case assumes there would be at least one, leading to false error messages in these situations. Instead, sanity-check values iff we get at least one filesystem. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-19tests: add a local test for guest agentMarc-André Lureau
Add some local guest agent tests, as it is better than nothing, only when CONFIG_POSIX (using unix sockets). With the QGA_TEST_SIDE_EFFECTING environment variable, it will include tests with side effects, such as freezing/thawing the FS or changing the time. (a better test would involve a managed VM (or container), but it might be better to leave that off to autotest/avocado) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> * use mkdtemp() in placeof g_mkdtemp() for glib 2.22 compat * drop redundant/conflicting compat defines for g_assert_{true,false}, since glib-compat has them now. * build fixes for OSX: use PRId64 instead of glib formats, drop g_spawn_default usage for glib compat * assert connect_qga() doesn't fail * only enable test-qga for linux hosts * allow get-memory-block-info* to fail Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>