Age | Commit message (Collapse) | Author |
|
BLSI has inverted semantics for C as compared to the other two
BMI1 instructions, BLSMSK and BLSR. Introduce CC_OP_BLSI* for
this purpose.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2175
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240801075845.573075-3-richard.henderson@linaro.org>
|
|
The implementation for these instructions handles -0 as an invalid float
point value, whereas the Hexagon hardware considers it the same as +0
(which is valid). Let's fix that and add a regression test.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
|
|
You cannot use plugins without TCG enabled so it doesn't make sense to
have them separated off in the test directory structure. While we are
at it rename the directory to plugins to reflect the plural nature of
the directory and match up with contrib/plugins.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-10-alex.bennee@linaro.org>
|
|
Update the document with details about the layout of tests. Remove the
out of date cris comments. Refer to the developer guide for details
about how to run the tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-6-alex.bennee@linaro.org>
|
|
Recent debian cross-linker for loongarch issues
ld: warning: hello has a LOAD segment with RWX permissions
This is partially related to tests/tcg/loongarch64/system/kernel.ld,
but is not fixed by explicitly adding a single LOAD PHDR.
Disable the warning, since it does not apply to kernel images.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240724010733.22129-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-5-alex.bennee@linaro.org>
|
|
Add the --noexecstack assembler command-line option to avoid:
/usr/bin/ld: warning: boot.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
which is enabled by default with current debian cross toolchains.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240724010733.22129-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-4-alex.bennee@linaro.org>
|
|
In Gitlab CI, some ppc64 multi-threaded tcg tests crash when run in the
clang-user job with an assertion failure in glibc that seems to
indicate corruption:
signals: allocatestack.c:223: allocate_stack:
Assertion `powerof2 (pagesize_m1 + 1)' failed.
Disable these tests for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Python 3.12 warns:
TEST gdbstub MTE support on aarch64
/home/rth/qemu/src/tests/tcg/aarch64/gdbstub/test-mte.py:21: SyntaxWarning: invalid escape sequence '\('
PATTERN_0 = "Memory tags for address 0x[0-9a-f]+ match \(0x[0-9a-f]+\)."
Double up the \ to pass one through to the pattern.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240719004143.1319260-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-4-richard.henderson@linaro.org
Message-Id: 172090222034.13953.16888708708822922098-1@git.sr.ht
[rth: Split test from a larger patch, tidy assembly]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add tests to exercise the MTE stubs. The tests will only run if a
version of GDB that supports MTE is available in the test environment.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[AJB: re-base and checkpatch fixes]
Message-Id: <20240628050850.536447-12-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-41-alex.bennee@linaro.org>
|
|
Clang 14 generates
/home/rth/qemu/src/tests/tcg/arm/fcvt.c:431:9: error: invalid operand for instruction
asm("mrc p10, 7, r1, cr1, cr0, 0\n\t"
^
<inline asm>:1:6: note: instantiated into assembly here
mrc p10, 7, r1, cr1, cr0, 0
^
/home/rth/qemu/src/tests/tcg/arm/fcvt.c:432:32: error: invalid operand for instruction
"orr r1, r1, %[flags]\n\t"
^
<inline asm>:3:6: note: instantiated into assembly here
mcr p10, 7, r1, cr1, cr0, 0
^
This is perhaps a clang bug, but using the neon mnemonic is clearer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-14-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-19-alex.bennee@linaro.org>
|
|
Clang requires the architecture to be set properly
in order to assemble the half-precision instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-13-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-18-alex.bennee@linaro.org>
|
|
Clang does not allow specifying an integer as the value of a single
precision register. Explicitly move value from a general register.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[rth: Use one single inline asm block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-12-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-17-alex.bennee@linaro.org>
|
|
Clang does not support IWMXT instructions.
Fall back to the external assembler.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-11-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-16-alex.bennee@linaro.org>
|
|
This is redudant with a linker script, and is not
supported by clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-10-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-15-alex.bennee@linaro.org>
|
|
The test cases for "converting double-precision to single-precision"
emits float but the result variable was typed as uint32_t and corrupted
the printed values. Propertly type it as float.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Fixes: 8ec8a55e3fc9 ("tests/tcg/arm: add fcvt test cases for AArch32/64")
Message-Id: <20240627-tcg-v2-1-1690a813348e@daynix.com>
[rth: Update arm ref file as well]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-9-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-14-alex.bennee@linaro.org>
|
|
The only use of SME is inline assembly. Both gcc and clang only
support SME with very recent releases; by deferring detection to
the assembler we get better test coverage.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-13-alex.bennee@linaro.org>
|
|
clang version 18.1.6 does not support x constraint for AArch64.
Use w instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-tcg-v2-5-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-12-alex.bennee@linaro.org>
|
|
irg expects 64-bit integers. Passing a 32-bit integer results in
compilation failure with clang version 18.1.6.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-tcg-v2-4-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-6-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-11-alex.bennee@linaro.org>
|
|
clang version 18.1.6 assumes a register is 64-bit by default and
complains if a 32-bit value is given. Explicitly specify register width
when passing a 32-bit value.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240627-tcg-v2-3-1690a813348e@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-5-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-10-alex.bennee@linaro.org>
|
|
This option is not supported by clang, and is not required
in order to get sve code generation with gcc 12.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-9-alex.bennee@linaro.org>
|
|
Define the variable to the compiler flag used, not "y".
This avoids replication of the compiler flag itself.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-8-alex.bennee@linaro.org>
|
|
This avoids a memcpy to the stack when compiled with clang.
Since we don't enable optimization, nor provide memcpy,
this results in an undefined symbol error at link time.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240630190050.160642-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-7-alex.bennee@linaro.org>
|
|
Argument ordering for setcond2 is:
output, a_low, a_high, b_low, b_high, cond
The test is supposed to be against b_low, not a_high.
Cc: qemu-stable@nongnu.org
Fixes: ceb9ee06b71 ("tcg/optimize: Handle TCG_COND_TST{EQ,NE}")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2413
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240701024623.1265028-1-richard.henderson@linaro.org>
|
|
Input denormals cause the Javascript inexact bit
(output to Z) to be set.
Cc: qemu-stable@nongnu.org
Fixes: 6c1f6f2733a ("target/arm: Implement ARMv8.3-JSConv")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2375
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-4-richard.henderson@linaro.org
[PMM: fixed hardcoded tab in test case]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The use case for this is `make check-tcg EXTFLAGS="-accel kvm"`,
which allows validating the system TCG testcases on real hardware.
EXTFLAGS name is borrowed from tests/tcg/xtensa/Makefile.softmmu-target.
While at it, use += instead of = in order to be consistent with the
other architectures.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522184116.35975-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The Hexagon Programmer's Reference Manual says that the exception 0x1e
should be raised upon an unaligned program counter. Let's implement that
and also add some tests.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <277b7aeda2c717a96d4dde936b3ac77707cb6517.1714755107.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
|
|
At 09a7e7db0f (Hexagon (target/hexagon) Remove uses of
op_regs_generated.h.inc, 2024-03-06), we've changed the logic of
check_new_value() to use the new pre-calculated
packet->insn[...].dest_idx instead of calculating the index on the fly
using opcode_reginfo[...]. The dest_idx index is calculated roughly like
the following:
for reg in iset[tag]["syntax"]:
if reg.is_written():
dest_idx = regno
break
Thus, we take the first register that is writtable. Before that,
however, we also used to follow an alphabetical order on the register
type: 'd', 'e', 'x', and 'y'. No longer following that makes us select
the wrong register index and the HVX store new instruction does not
update the memory like expected.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Message-Id: <f548dc1c240819c724245e887f29f918441e9125.1716220379.git.quic_mathbern@quicinc.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
|
|
Add a small test to avoid regressions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240502054417.234340-15-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
For modern cpus, the kernel uses xsave to store all extra
cpu state across the signal handler. For xsave/xrstor to
work, the pointer must be 64 byte aligned. Moreover, the
regular part of the signal frame must be 16 byte aligned.
Attempt to mirror the kernel code as much as possible.
Use enum FPStateKind instead of use_xsave() and use_fxsr().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1648
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We don't want to build on the default machine setup here but define a
custom one for the microbit.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240514174253.694591-2-alex.bennee@linaro.org>
|
|
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make sure the decoding of HVX .new is correctly handling this case
Signed-off-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20240307032327.4799-6-ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <bcain@quicinc.com>
|
|
The documentation says:
SUBV Rm, Rn Rn - Rm -> Rn, underflow -> T
The overflow / underflow can be calculated as:
T = ((Rn ^ Rm) & (Result ^ Rn)) >> 31
However we were using the incorrect:
T = ((Rn ^ Rm) & (Result ^ Rm)) >> 31
Fix by using the Rn register instead of Rm.
Add tests provided by Paul Cercueil.
Cc: qemu-stable@nongnu.org
Fixes: ad8d25a11f ("target-sh4: implement addv and subv using TCG")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2318
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-3-philmd@linaro.org>
|
|
The documentation says:
ADDV Rm, Rn Rn + Rm -> Rn, overflow -> T
But QEMU implementation was:
ADDV Rm, Rn Rn + Rm -> Rm, overflow -> T
Fix by filling the correct Rm register.
Add tests provided by Paul Cercueil.
Cc: qemu-stable@nongnu.org
Fixes: ad8d25a11f ("target-sh4: implement addv and subv using TCG")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2317
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20240430163125.77430-2-philmd@linaro.org>
|
|
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
|
|
The saturation arithmetic logic in helper_macw is not correct.
I tested and verified this behavior on a SH7091.
Reviewd-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Zack Buhman <zack@buhman.org>
Message-Id: <20240405233802.29128-3-zack@buhman.org>
[rth: Reformat helper_macw, add a test case.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The saturation arithmetic logic in helper_macl is not correct.
I tested and verified this behavior on a SH7091.
Signed-off-by: Zack Buhman <zack@buhman.org>
Message-Id: <20240404162641.27528-2-zack@buhman.org>
[rth: Reformat helper_macl, add a test case.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Split out the tail of fold_neg to fold_neg_no_const so that we
can avoid attempting to constant fold vector negate.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2150
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The 'sign' computation is attempting to locate the sign bit that has
been repeated, so that we can test if that bit is known zero. That
computation can be zero if there are no known sign repetitions.
Cc: qemu-stable@nongnu.org
Fixes: 93a967fbb57 ("tcg/optimize: Propagate sign info for shifting")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Add a small test to prevent regressions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240325192436.561154-5-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240318202722.20675-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add multiarch test for testing if Xfer:siginfo:read query is properly
handled by gdbstub.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-6-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Implement FEAT_ECV
* STM32L4x5: Implement GPIO device
* Fix 32-bit SMOPA
* Refactor v7m related code from cpu32.c into its own file
* hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXrM50ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3l3aD/9BDWm3LNSIyHQ0qFD1l6wc
# JeAymSBecMD6sfRaPloLaB5HlU9AhLQWHe8Sa/hkWdYPhvhh6keESlVScJXi6Irq
# wm3MuDJwr9QZgXWuHsEwXj4sve+O/MgDHcYSyEldbcyqjbivMCUKCGXeT2VxQftd
# LarETxUTsdPeaWm3Lm11CkiO5r0DMJyebgVc6jloT9O1oK8szrkDix09U6eCGhXy
# l1ep0KY2mk+MtoboDflD3W/Zu0LrAZ1159r4LqTMD2Hp9Tt222aDOjEKi+Qjns22
# E86YCy7kPcsHVOskF42SkZ8M044T/tCetKgnOHqn8hbTCW5uNT+zJNC1feAB92pi
# 4xWErOfYy7d5UVzWfUYudGKrb91rr5h2jd1SWn2NeQtdmU8KyFEjQS1y4FNZvPTD
# lrzyuTv8daeKSImq6JPzws/MJRh5I87TpRgKDg6hTJDaUCLu0yIuV9pkUsIdJ5mW
# 01ol8tmDgpBRsxjJlIf40KxOt5SQ2VoYh7L8jgRjGv9DEP5hU1AkPqQGtyx7Wcd/
# ImRYQ/cOqircJPqX60DHljZDACVOzrFIEmpKvu45tt1On0iNXKCMuIl0vwI9XERx
# CSgqIz7KDI5gNlruZQDyHvVehQZW7sJo9rH5RawqObsUHTlg5rLb++79Da2RWtbV
# yvQLaI3qPngknz//1eAKxg==
# =YmPl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 08 Mar 2024 15:49:49 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20240308' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: Move v7m-related code from cpu32.c into a separate file
hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later
target/arm: Fix 32-bit SMOPA
tests/qtest: Add STM32L4x5 GPIO QTest testcase
hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoC
hw/gpio: Implement STM32L4x5 GPIO
target/arm: Enable FEAT_ECV for 'max' CPU
target/arm: Implement FEAT_ECV CNTPOFF_EL2 handling
target/arm: Define CNTPCTSS_EL0 and CNTVCTSS_EL0
target/arm: Implement new FEAT_ECV trap bits
target/arm: Don't allow RES0 CNTHCTL_EL2 bits to be written
target/arm: use FIELD macro for CNTHCTL bit definitions
target/arm: Timer _EL02 registers UNDEF for E2H == 0
target/arm: Move some register related defines to internals.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Running test-fcvtmod triggers the following deprecation warning:
warning: CPU property 'Zfa' is deprecated. Please use 'zfa' instead
Let's fix that.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240229180656.1208881-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org
Fixes: 23a5e3859f5 ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-7-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-20-alex.bennee@linaro.org>
|
|
Add follow-fork-mode child and and follow-fork-mode parent tests.
Check for the obvious pitfalls, such as lingering breakpoints,
catchpoints, and single-step mode.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-13-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-14-alex.bennee@linaro.org>
|
|
Add a regression test for a recently fixed issue, where shmat()
desynced the guest and the host view of the address space and caused
open("/proc/self/maps") to SEGV.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <jwyuvao4apydvykmsnvacwshdgy3ixv7qvkh4dbxm3jkwgnttw@k4wpaayou7oq>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
When guest page size > host page size, this test can fail
due to the SIGBUS protection hack. Avoid this by making
sure that the file size is at least one guest page.
Visible with alpha guest on x86_64 host.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-26-richard.henderson@linaro.org>
|