aboutsummaryrefslogtreecommitdiff
path: root/tests/qtest
AgeCommit message (Collapse)Author
2022-07-15Merge tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu into ↵Peter Maydell
staging aspeed queue: * New ISL69259 device model * New fby35 multi-SoC machine (AST1030 BIC + AST2600 BMC) * Aspeed GPIO fixes * Extension of m25p80 with write protect bits * More avocado tests using the Aspeed SDK # gpg: Signature made Thu 14 Jul 2022 15:28:09 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20220714' of https://github.com/legoater/qemu: aspeed: Add fby35-bmc slot GPIO's hw/gpio/aspeed: Don't let guests modify input pins qtest/aspeed_gpio: Add input pin modification test hw: m25p80: add tests for BP and TB bit write protect hw: m25p80: Add Block Protect and Top Bottom bits for write protect test/avocado/machine_aspeed.py: Add SDK tests docs: aspeed: Minor updates docs: aspeed: Add fby35 multi-SoC machine section aspeed: Add AST1030 (BIC) to fby35 aspeed: fby35: Add a bootrom for the BMC aspeed: Add AST2600 (BMC) to fby35 aspeed: Add fby35 skeleton aspeed: Make aspeed_board_init_flashes public aspeed: Refactor UART init for multi-SoC machines aspeed: Create SRAM name from first CPU index hw/sensor: Add Renesas ISL69259 device model hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators hw/i2c/pmbus: Add idle state to return 0xff's aspeed: sbc: Allow per-machine settings Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-14hw/gpio/aspeed: Don't let guests modify input pinsPeter Delevoryas
Up until now, guests could modify input pins by overwriting the data value register. The guest OS should only be allowed to modify output pin values, and the QOM property setter should only be permitted to modify input pins. This change also updates the gpio input pin test to match this expectation. Andrew suggested this particularly refactoring here: https://lore.kernel.org/qemu-devel/23523aa1-ba81-412b-92cc-8174faba3612@www.fastmail.com/ Suggested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Peter Delevoryas <peter@pjd.dev> Fixes: 4b7f956862dc ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500") Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220712023219.41065-3-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14qtest/aspeed_gpio: Add input pin modification testPeter Delevoryas
Verify the current behavior, which is that input pins can be modified by guest OS register writes. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220712023219.41065-2-peter@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-14hw: m25p80: add tests for BP and TB bit write protectIris Chen
Signed-off-by: Iris Chen <irischenlj@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220627185234.1911337-3-irischenlj@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-07-13datadir: Use bundle mechanismAkihiko Odaki
softmmu/datadir.c had its own implementation to find files in the build tree, but now bundle mechanism provides the unified implementation which works for datadir and the other files. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)Mauro Matteo Cascella
Set current_req to NULL, not current_req->req, to prevent reusing a free'd buffer in case of repeated SCSI cancel requests. Also apply the fix to CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel the request. Thanks to Alexander Bulekov for providing a reproducer. Fixes: CVE-2022-0216 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972 Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20220711123316.421279-1-mcascell@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-05tests: use consistent bandwidth/downtime limits in migration testsDaniel P. Berrangé
The different migration test cases are using a variety of settings to ensure convergance/non-convergance. Introduce two helpers to extra the common functionality and ensure consistency. * Non-convergance: 1ms downtime, 30mbs bandwidth * Convergance: 30s downtime, 1gbs bandwidth Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220628105434.295905-5-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-05tests: increase migration test converge downtime to 30 secondsDaniel P. Berrangé
While 1 second might be enough to converge migration on a fast host, this is not guaranteed, especially if using TLS in the tests without hardware accelerated crypto available. Increasing the downtime to 30 seconds should guarantee it can converge in any sane scenario. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220628105434.295905-4-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-05tests: wait for migration completion before looking for STOP eventDaniel P. Berrangé
When moving into the convergance phase, the precopy tests will first look for a STOP event and once found will look for migration completion status. If the test VM is not converging, the test suite will be waiting for the STOP event forever. If we wait for the migration completion status first, then we will trigger the previously added timeout and prevent the test hanging forever. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220628105434.295905-3-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-07-05tests: wait max 120 seconds for migration test status changesDaniel P. Berrangé
Currently the wait_for_migration_fail and wait_for_migration_complete functions will spin in an infinite loop checking query-migrate status to detect a specific change/goal. This is fine when everything goes to plan, but when the unusual happens, these will hang the test suite forever. Any normally executing migration test case normally takes < 1 second for a state change, with exception of the autoconverge test which takes about 5 seconds. Taking into account possibility of people running tests inside TCG, allowing a factor of x20 slowdown gives a reasonable worst case of 120 seconds. Anything taking longer than this is a strong sign that the test has hung, or the test should be rewritten to be faster. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220628105434.295905-2-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-06-30hw: m25p80: add tests for write protect (WP# and SRWD bit)Iris Chen
Signed-off-by: Iris Chen <irischenlj@fb.com> Message-Id: <20220624183016.2125264-1-irischenlj@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-22hw: m25p80: fixing individual test failure when tests are running in isolationIris Chen
Signed-off-by: Iris Chen <irischenlj@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-16tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistentChristian Schoenebeck
Extend previously added test case by checking that fid was unaffected by 'Twalk' request (i.e. when 2nd path component of request being invalid). Do that by subsequently sending a 'Tgetattr' request with the fid previously used for 'Twalk'; that 'Tgetattr' request should return an 'Rlerror' response by 9p server with error code ENOENT as that fid is basically invalid. And as we are at it, also check that the QID returned by 'Twalk' is not identical to the root node's QID. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <6f0813cafdbf683cdac8b1492dd4ef8699c5b1d9.1647339025.git.qemu_oss@crudebyte.com>
2022-06-16tests/9pfs: guard recent 'Twalk' behaviour fixChristian Schoenebeck
Previous 9p patch fixed 'Twalk' request handling, which was previously not behaving as specified by the 9p2000 protocol spec. This patch adds a new test case which guards the new 'Twalk' behaviour in question. More specifically: it sends a 'Twalk' request where the 1st path component is valid, whereas the 2nd path component transmitted to server does not exist. The expected behaviour is that 9p server would respond by sending a 'Rwalk' response with exactly 1 QID (instead of 'Rlerror' response). Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <61bde2f44b87e24b70ec098dfb81765665b2dfcb.1647339025.git.qemu_oss@crudebyte.com>
2022-06-16tests/9pfs: compare QIDs in fs_walk_none() testChristian Schoenebeck
Extend previously added fs_walk_none() test by comparing the QID of the root fid with the QID of the cloned fid. They should be equal. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <5bbe9c6931b4600a9a23742f5ff2d38c1188237d.1647339025.git.qemu_oss@crudebyte.com>
2022-06-16tests/9pfs: Twalk with nwname=0Christian Schoenebeck
Send Twalk request with nwname=0. In this case no QIDs should be returned by 9p server; this is equivalent to walking to dot. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <b5ead2775000203607801f09bcefc04c493d8bfa.1647339025.git.qemu_oss@crudebyte.com>
2022-06-16tests/9pfs: walk to non-existent dirChristian Schoenebeck
Expect ENOENT Rlerror response when trying to walk to a non-existent directory. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Based-on: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com> Message-Id: <1f5aa50ace3ba3861ea31e8888367518282065a6.1647339025.git.qemu_oss@crudebyte.com>
2022-06-15vfio-user: handle PCI BAR accessesJagannathan Raman
Determine the BARs used by the PCI device and register handlers to manage the access to the same. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-06-10Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging virtio,pc,pci: fixes,cleanups,features more CXL patches VIOT Igor's huge AML rework fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc # QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA # oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO # sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7 # 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5 # 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE= # =LXG0 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits) hw/vhost-user-scsi|blk: set `supports_config` flag correctly hw/virtio/vhost-user: don't use uninitialized variable tests/acpi: virt: update golden masters for VIOT hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus tests/acpi: virt: allow VIOT acpi table changes hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table hw/acpi/viot: move the individual PCI host bridge entry generation to a new function hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges() hw/cxl: Fix missing write mask for HDM decoder target list registers pci: fix overflow in snprintf string formatting hw/machine: Drop cxl_supported flag as no longer useful hw/cxl: Move the CXLState from MachineState to machine type specific state. tests/acpi: Update q35/CEDT.cxl for new memory addresses. pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup. tests/acpi: Allow modification of q35 CXL CEDT table. hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c hw/acpi/cxl: Pass in the CXLState directly rather than MachineState hw/cxl: Make the CXL fixed memory window setup a machine parameter. x86: acpi-build: do not include hw/isa/isa.h directly tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-10tests/qtest: Reduce npcm7xx_sdhci test image sizeHao Wu
Creating 1GB image for a simple qtest is unnecessary and could lead to failures. We reduce the image size to 1MB to reduce the test overhead. Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220609214125.4192212-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-09tests/acpi: virt: update golden masters for VIOTMark Cave-Ayland
Differences between disassembled ASL files for VIOT: +++ /tmp/asl-V69GM1.dsl 2022-05-18 10:22:27.239796759 +0100 @@ -36,11 +36,11 @@ [041h 0065 1] Reserved : 00 [042h 0066 2] Length : 0018 -[044h 0068 4] Endpoint start : 00003000 +[044h 0068 4] Endpoint start : 00001000 [048h 0072 2] PCI Segment start : 0000 [04Ah 0074 2] PCI Segment end : 0000 -[04Ch 0076 2] PCI BDF start : 3000 -[04Eh 0078 2] PCI BDF end : 30FF +[04Ch 0076 2] PCI BDF start : 1000 +[04Eh 0078 2] PCI BDF end : 10FF [050h 0080 2] Output node : 0030 [052h 0082 6] Reserved : 000000000000 @@ -48,11 +48,11 @@ [059h 0089 1] Reserved : 00 [05Ah 0090 2] Length : 0018 -[05Ch 0092 4] Endpoint start : 00001000 +[05Ch 0092 4] Endpoint start : 00003000 [060h 0096 2] PCI Segment start : 0000 [062h 0098 2] PCI Segment end : 0000 -[064h 0100 2] PCI BDF start : 1000 -[066h 0102 2] PCI BDF end : 10FF +[064h 0100 2] PCI BDF start : 3000 +[066h 0102 2] PCI BDF end : 30FF [068h 0104 2] Output node : 0030 [06Ah 0106 6] Reserved : 000000000000 @@ -62,6 +62,6 @@ 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 03 00 30 00 00 00 00 00 00 00 00 00 // ......0......... 0030: 03 00 10 00 00 00 10 00 00 00 00 00 00 00 00 00 // ................ - 0040: 01 00 18 00 00 30 00 00 00 00 00 00 00 30 FF 30 // .....0.......0.0 - 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 10 00 00 // 0............... - 0060: 00 00 00 00 00 10 FF 10 30 00 00 00 00 00 00 00 // ........0....... + 0040: 01 00 18 00 00 10 00 00 00 00 00 00 00 10 FF 10 // ................ + 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 30 00 00 // 0............0.. + 0060: 00 00 00 00 00 30 FF 30 30 00 00 00 00 00 00 00 // .....0.00....... Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220525173232.31429-7-mark.cave-ayland@ilande.co.uk> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests/acpi: virt: allow VIOT acpi table changesMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220525173232.31429-5-mark.cave-ayland@ilande.co.uk> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests/acpi: Update q35/CEDT.cxl for new memory addresses.Jonathan Cameron
The CEDT table includes addreses of host bridge registers. There are allocated in a different order due to the previous patch, so update to the table is needed. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests/acpi: Allow modification of q35 CXL CEDT table.Jonathan Cameron
Needed to allow memory address changes as a result of next patch. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09hw/cxl: Make the CXL fixed memory window setup a machine parameter.Jonathan Cameron
Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC. Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change. The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties. Update qemu-options.hx to reflect that this is now a -machine parameter. The bulk of -M / -machine parameters are documented under machine, so use that in preference to M. Update cxl-test and bios-tables-test to reflect new parameters. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobsIgor Mammedov
expected move of tmp-tis device description directly under Device(ISA) node. for tpm-tis 2.0: @@ -145,6 +145,189 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) + Device (TPM) + { + Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID + Name (_STR, "TPM 2.0 Device") // _STR: Description String + Name (_UID, One) // _UID: Unique ID + Name (_STA, 0x0F) // _STA: Status ... + } @@ -3281,189 +3464,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) Method (PCNT, 0, NotSerialized) { } - - Device (TPM) - { - Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID - Name (_STR, "TPM 2.0 Device") // _STR: Description String - Name (_UID, One) // _UID: Unique ID - Name (_STA, 0x0F) // _STA: Status ... - } for tpm-tis 1.2: @@ -145,6 +145,188 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) + Device (TPM) + { + Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID + Name (_UID, One) // _UID: Unique ID + Name (_STA, 0x0F) // _STA: Status ... + } @@ -3281,188 +3463,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) Method (PCNT, 0, NotSerialized) { } - - Device (ISA.TPM) - { - Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_STA, 0x0F) // _STA: Status ... - } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20220608135340.3304695-35-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: white-list DSDT.tis.tpm2/DSDT.tis.tpm12 expected blobsIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20220608135340.3304695-31-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected DSDT.pvpanic-isa blobIgor Mammedov
@@ -145,6 +145,37 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) + Device (PEVT) + { + Name (_HID, "QEMU0001") // _HID: Hardware ID + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x0505, // Range Minimum + 0x0505, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + }) + OperationRegion (PEOR, SystemIO, 0x0505, One) + Field (PEOR, ByteAcc, NoLock, Preserve) + { + PEPT, 8 + } + + Name (_STA, 0x0F) // _STA: Status + Method (RDPT, 0, NotSerialized) + { + Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */ + Return (Local0) + } + + Method (WRPT, 1, NotSerialized) + { + PEPT = Arg0 + } + } + Device (KBD) { Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID @@ -3246,40 +3277,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) } } - Scope (\_SB.PCI0.ISA) - { - Device (PEVT) - { - Name (_HID, "QEMU0001") // _HID: Hardware ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IO (Decode16, - 0x0505, // Range Minimum - 0x0505, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - }) - OperationRegion (PEOR, SystemIO, 0x0505, One) - Field (PEOR, ByteAcc, NoLock, Preserve) - { - PEPT, 8 - } - - Name (_STA, 0x0F) // _STA: Status - Method (RDPT, 0, NotSerialized) - { - Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */ - Return (Local0) - } - - Method (WRPT, 1, NotSerialized) - { - PEPT = Arg0 - } - } - } - Scope (\_SB) { Scope (PCI0) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-30-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: add pvpanic-isa: testcaseIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-28-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: white-lists expected DSDT.pvpanic-isa blobIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-27-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected blobsIgor Mammedov
@@ -145,6 +145,23 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) + Device (SMC) + { + Name (_HID, EisaId ("APP0001")) // _HID: Hardware ID + Name (_STA, 0x0B) // _STA: Status + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x0300, // Range Minimum + 0x0300, // Range Maximum + 0x01, // Alignment + 0x20, // Length + ) + IRQNoFlags () + {6} + }) + } + Device (KBD) { Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID @@ -3246,26 +3263,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) } } - Scope (\_SB.PCI0.ISA) - { - Device (SMC) - { - Name (_HID, EisaId ("APP0001")) // _HID: Hardware ID - Name (_STA, 0x0B) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IO (Decode16, - 0x0300, // Range Minimum - 0x0300, // Range Maximum - 0x01, // Alignment - 0x20, // Length - ) - IRQNoFlags () - {6} - }) - } - } - Scope (\_SB) { Scope (PCI0) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-26-imammedo@redhat.com>
2022-06-09tests: acpi: add applesmc testcaseIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-24-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: add and white-list DSDT.applesmc expected blobIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-23-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected blobsIgor Mammedov
Expected AML change: ISA devices under separate _SB.PCI0.ISA scope are moved directly under Device(ISA) node. Example from PC machine, and q35 have similar changes: { Name (_ADR, 0x00010000) // _ADR: Address OperationRegion (P40C, PCI_Config, 0x60, 0x04) - } - } - - Scope (_SB.PCI0.ISA) - { - Device (KBD) - { - Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID - Name (_STA, 0x0F) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + Device (KBD) { - IO (Decode16, - 0x0060, // Range Minimum - 0x0060, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IO (Decode16, - 0x0064, // Range Minimum - 0x0064, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IRQNoFlags () - {1} - }) - } - - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */) // _HID: Hardware ID - Name (_STA, 0x0F) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IRQNoFlags () - {12} - }) - } + Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID + Name (_STA, 0x0F) // _STA: Status + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x0060, // Range Minimum + 0x0060, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IO (Decode16, + 0x0064, // Range Minimum + 0x0064, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IRQNoFlags () + {1} + }) + } - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - IO (Decode16, - 0x03F2, // Range Minimum - 0x03F2, // Range Maximum - 0x00, // Alignment - 0x04, // Length - ) - IO (Decode16, - 0x03F7, // Range Minimum - 0x03F7, // Range Maximum - 0x00, // Alignment - 0x01, // Length - ) - IRQNoFlags () - {6} - DMA (Compatibility, NotBusMaster, Transfer8, ) - {2} - }) - Device (FLPA) + Device (MOU) { - Name (_ADR, Zero) // _ADR: Address - Name (_FDI, Package (0x10) // _FDI: Floppy Drive Information + Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */) // _HID: Hardware ID + Name (_STA, 0x0F) // _STA: Status + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { - Zero, - 0x05, - 0x4F, - 0x30, - One, - 0xAF, - 0x02, - 0x25, - 0x02, - 0x12, - 0x1B, - 0xFF, - 0x6C, - 0xF6, - 0x0F, - 0x08 + IRQNoFlags () + {12} }) } - Name (_FDE, Buffer (0x14) // _FDE: Floppy Disk Enumerate + Device (FDC0) { - /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........ - /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........ - /* 0010 */ 0x02, 0x00, 0x00, 0x00 // .... - }) - } + Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x03F2, // Range Minimum + 0x03F2, // Range Maximum + 0x00, // Alignment + 0x04, // Length + ) + IO (Decode16, + 0x03F7, // Range Minimum + 0x03F7, // Range Maximum + 0x00, // Alignment + 0x01, // Length + ) + IRQNoFlags () + {6} + DMA (Compatibility, NotBusMaster, Transfer8, ) + {2} + }) + Device (FLPA) + { + Name (_ADR, Zero) // _ADR: Address + Name (_FDI, Package (0x10) // _FDI: Floppy Drive Information + { + Zero, + 0x05, + 0x4F, + 0x30, + One, + 0xAF, + 0x02, + 0x25, + 0x02, + 0x12, + 0x1B, + 0xFF, + 0x6C, + 0xF6, + 0x0F, + 0x08 + }) + } - Device (LPT1) - { - Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */) // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_STA, 0x0F) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + Name (_FDE, Buffer (0x14) // _FDE: Floppy Disk Enumerate + { + /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........ + /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........ + /* 0010 */ 0x02, 0x00, 0x00, 0x00 // .... + }) + } + + Device (LPT1) { - IO (Decode16, - 0x0378, // Range Minimum - 0x0378, // Range Maximum - 0x08, // Alignment - 0x08, // Length - ) - IRQNoFlags () - {7} - }) - } + Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */) // _HID: Hardware ID + Name (_UID, One) // _UID: Unique ID + Name (_STA, 0x0F) // _STA: Status + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x0378, // Range Minimum + 0x0378, // Range Maximum + 0x08, // Alignment + 0x08, // Length + ) + IRQNoFlags () + {7} + }) + } - Device (COM1) - { - Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */) // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_STA, 0x0F) // _STA: Status - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + Device (COM1) { - IO (Decode16, - 0x03F8, // Range Minimum - 0x03F8, // Range Maximum - 0x00, // Alignment - 0x08, // Length - ) - IRQNoFlags () - {4} - }) - } + Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */) // _HID: Hardware ID + Name (_UID, One) // _UID: Unique ID + Name (_STA, 0x0F) // _STA: Status + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x03F8, // Range Minimum + 0x03F8, // Range Maximum + 0x00, // Alignment + 0x08, // Length + ) + IRQNoFlags () + {4} + }) + } - Device (RTC) - { - Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */) // _HID: Hardware ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + Device (RTC) { - IO (Decode16, - 0x0070, // Range Minimum - 0x0070, // Range Maximum - 0x01, // Alignment - 0x08, // Length - ) - IRQNoFlags () - {8} - }) + Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */) // _HID: Hardware ID + Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings + { + IO (Decode16, + 0x0070, // Range Minimum + 0x0070, // Range Maximum + 0x01, // Alignment + 0x08, // Length + ) + IRQNoFlags () + {8} + }) + } } } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220609115113.3478093-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: white-list to be re-factored pc/q35 DSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220609114855.3477822-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected DSDT.ipmismbus blobIgor Mammedov
expected AML change: Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0, - AddressingMode7Bit, "\\_SB.PCI0.SMB0", + AddressingMode7Bit, "^", 0x00, ResourceProducer, , Exclusive, ) }) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-15-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: whitelist DSDT.ipmismbus expected blobIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-13-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: update expected blob DSDT.ipmismbusIgor Mammedov
basic q35 DSDT with an extra device node: Device (MI1) { Name (_HID, EisaId ("IPI0001")) // _HID: Hardware ID Name (_STR, "ipmi_smbus") // _STR: Description String Name (_UID, One) // _UID: Unique ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0, AddressingMode7Bit, "\\_SB.PCI0.SMB0", 0x00, ResourceProducer, , Exclusive, ) }) Name (_IFT, 0x04) // _IFT: IPMI Interface Type Name (_SRV, 0x0200) // _SRV: IPMI Spec Revision } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-12-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: q35: add test for smbus-ipmi deviceIgor Mammedov
expected new device node: Device (MI1) { Name (_HID, EisaId ("IPI0001")) // _HID: Hardware ID Name (_STR, "ipmi_smbus") // _STR: Description String Name (_UID, One) // _UID: Unique ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0, AddressingMode7Bit, "\\_SB.PCI0.SMB0", 0x00, ResourceProducer, , Exclusive, ) }) Name (_IFT, 0x04) // _IFT: IPMI Interface Type Name (_SRV, 0x0200) // _SRV: IPMI Spec Revision } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-11-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09tests: acpi: add and whitelist DSDT.ipmismbus expected blobIgor Mammedov
.. which will be used by follow up smbus-ipmi test-case Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-03tests/qtest: use g_autofree for test_server_create_chrAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220524154056.2896913-12-alex.bennee@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-06-03qtest/npcm7xx_pwm-test: Fix memory leak in mft_qom_setMiaoqian Lin
g_strdup_printf() allocated memory for path, we should free it with g_free() when no longer needed. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Message-Id: <20220531080921.4704-1-linmq006@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-28tests: make libqmp buildable for win32Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220525144140.591926-4-marcandre.lureau@redhat.com>
2022-05-28include: move qemu_*_exec_dir() to cutilsMarc-André Lureau
The function is required by get_relocated_path() (already in cutils), and used by qemu-ga and may be generally useful. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220525144140.591926-2-marcandre.lureau@redhat.com>
2022-05-25hw: m25p80: allow write_enable latch get/setIris Chen
The write_enable latch property is not currently exposed. This commit makes it a modifiable property. Signed-off-by: Iris Chen <irischenlj@fb.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-Id: <20220513055022.951759-1-irischenlj@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-18tests/qtest: use prctl(PR_SET_PDEATHSIG) as fallback to kill QEMUDaniel P. Berrangé
Although we register a ABRT handler to kill off QEMU when g_assert() triggers, we want an extra safety net. The QEMU process might be non-functional and thus not have responded to SIGTERM. The test script might also have crashed with SEGV, in which case the cleanup handlers won't ever run. Using the Linux specific prctl(PR_SET_PDEATHSIG) syscall, we can ensure that QEMU gets sent SIGKILL as soon as the controlling qtest exits, if nothing else has correctly told it to quit. Note, technically the death signal is sent when the *thread* that called fork() exits. IOW, if you are calling qtest_init() in one thread, letting that thread exit, and then expecting to run qtest_quit() in a different thread, things are not going to work out. Fortunately that is not a scenario that exists in qtests, as pairs of qtest_init and qtest_quit are always called from the same thread. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220513154906.206715-3-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-18tests/qtest: fix registration of ABRT handler for QEMU cleanupDaniel P. Berrangé
qtest_init registers a hook to cleanup the running QEMU process should g_assert() fire before qtest_quit is called. When the first hook is registered, it is supposed to triggere registration of the SIGABRT handler. Unfortunately the logic in hook_list_is_empty is inverted, so the SIGABRT handler never gets registered, unless 2 or more QEMU processes are run concurrently. This caused qtest to leak QEMU processes anytime g_assert triggers. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220513154906.206715-2-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-16Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging virtio,pc,pci: fixes,cleanups,features most of CXL support fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi # MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv # SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77 # 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR # PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1 # f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA= # =xdSk # -----END PGP SIGNATURE----- # gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits) vhost-user-scsi: avoid unlink(NULL) with fd passing virtio-net: don't handle mq request in userspace handler for vhost-vdpa vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request() vhost-vdpa: backend feature should set only once vhost-net: fix improper cleanup in vhost_net_start vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated hw/i386/amd_iommu: Fix IOMMU event log encoding errors hw/i386: Make pic a property of common x86 base machine type hw/i386: Make pit a property of common x86 base machine type include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG vhost-user: more master/slave things virtio: add vhost support for virtio devices virtio: drop name parameter for virtio_init() virtio/vhost-user: dynamically assign VhostUserHostNotifiers hw/virtio/vhost-user: don't suppress F_CONFIG when supported include/hw: start documenting the vhost API ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-16tests: ensure migration status isn't reported as failedDaniel P. Berrangé
Various methods in the migration test call 'query_migrate' to fetch the current status and then access a particular field. Almost all of these cases expect the migration to be in a non-failed state. In the case of 'wait_for_migration_pass' in particular, if the status is 'failed' then it will get into an infinite loop. By validating that the status is not 'failed' the test suite will assert rather than hang when getting into an unexpected state. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220426160048.812266-10-berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-05-16tests: add multifd migration tests of TLS with x509 credentialsDaniel P. Berrangé
This validates that we correctly handle multifd migration success and failure scenarios when using TLS with x509 certificates. There are quite a few different scenarios that matter in relation to hostname validation, but we skip a couple as we can assume that the non-multifd coverage applies to some extent. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220426160048.812266-9-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 21:28:06 +0000