aboutsummaryrefslogtreecommitdiff
path: root/tests/qtest
AgeCommit message (Collapse)Author
2022-03-02tests: Pass in MigrateStart** into test_migrate_start()Peter Xu
test_migrate_start() will release the MigrateStart structure that passed in, however that's not super clear to the caller because after the call returned the pointer can still be referenced by the callers. It can easily be a source of use-after-free. Let's pass in a double pointer of that, then we can safely clear the pointer for the caller after the struct is released. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20220301083925.33483-26-peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Fixup apply since I didn't take 24/25
2022-02-21tests/qtest: failover: migration abort test with failover offLaurent Vivier
Test abort during active migration when failover is disabled from QEMU or from guest side. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-8-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: test migration if the guest doesn't support failoverLaurent Vivier
The primary device is not plugged and the migration is done only with the standby device Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-7-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: check migration with failover offLaurent Vivier
If failover is off, the primary device is not plugged and the migration is done only with the standby device. On destination, the primary device must not be plugged. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-6-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: check missing guest featureLaurent Vivier
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't the primary device must be kept hidden Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-5-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: check the feature is correctly providedLaurent Vivier
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on, and doesn't if failover is off Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-4-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: use a macro for check_one_card()Laurent Vivier
This allows g_assert() to correctly report the line number of the error in the test case. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-3-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest: failover: clean up pathname of testsLaurent Vivier
clearly indentify parameters, hotplug and migration tests Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20220203141537.972317-2-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest/ide-test: Remove bad retry_isa testThomas Huth
The retry_isa test is not doing what it was intended for: The test_retry_flush() function ignores the machine parameter completely and thus this test does not get run with the "isapc" machine. Moreover, in the course of time, the test_retry_flush() has been changed to depend on PCI-related functions, so this also cannot be fixed by simply using the machine parameter now. The correct fix would be to switch the whole test to libqos, but until someone has time to do this, let's simply drop the retry_isa test for now. Message-Id: <20220121120635.220644-1-thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/qtest/vhost-user-test.c: Use vhostforce=onEric Auger
-netdev vhost-user,vhostforce is deprecated and vhostforce=on should be used instead. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220210145254.157790-2-eric.auger@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21erst: drop cast to long longMichael S. Tsirkin
The way to print uint64_t is with PRIx64, not with a cast to long long. Message-Id: <20220206093547.1282513-1-mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/x86: Use 'pc' machine type for hotplug testsDr. David Alan Gilbert
Hotplug tests need a bridge setting up on q35, for now keep them on 'pc'. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220215162537.605030-3-dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21tests/x86: Use 'pc' machine type for old hardware testsDr. David Alan Gilbert
For tests that rely on old hardware, e.g. floppies or IDE drives, explicitly select the 'pc' machine type. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220215162537.605030-2-dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-17tests/9pfs: Use g_autofree and g_autoptr where possibleGreg Kurz
It is recommended to use g_autofree or g_autoptr as it reduces the odds of introducing memory leaks in future changes. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20220201151508.190035-3-groug@kaod.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-02-17tests/9pfs: Fix leak of local_test_pathGreg Kurz
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir() when the temporary directory is removed. Clarify the lifecycle of local_test_path while here. Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20220201151508.190035-2-groug@kaod.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-02-17tests/9pfs: fix mkdir() being called twiceChristian Schoenebeck
The 9p test cases use mkdtemp() to create a temporary directory for running the 'local' 9p tests with real files/dirs. Unlike mktemp() which only generates a unique file name, mkdtemp() also creates the directory, therefore the subsequent mkdir() was wrong and caused errors on some systems. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests) Reported-by: Daniel P. Berrangé <berrange@redhat.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832 Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org> Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
2022-02-17tests/9pfs: use g_autofree where possibleChristian Schoenebeck
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
2022-02-09tests/qtest: enable more vhost-user tests by defaultAlex Bennée
If this starts causing failures again we should probably fix that. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
2022-02-08hw/sensor: Add lsm303dlhc magnetometer deviceKevin Townsend
This commit adds emulation of the magnetometer on the LSM303DLHC. It allows the magnetometer's X, Y and Z outputs to be set via the mag-x, mag-y and mag-z properties, as well as the 12-bit temperature output via the temperature property. Sensor can be enabled with 'CONFIG_LSM303DLHC_MAG=y'. Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org> Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-06ACPI ERST: step 6 of bios-tables-test.cEric DeVolder
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 6. Below is the disassembly of tests/data/acpi/pc/ERST.acpierst. /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20180508 (64-bit version) * Copyright (c) 2000 - 2018 Intel Corporation * * Disassembly of tests/data/acpi/pc/ERST.acpierst, Thu Dec 2 13:32:07 2021 * * ACPI Data Table [ERST] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "ERST" [Error Record Serialization Table] [004h 0004 4] Table Length : 00000390 [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : D6 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] Serialization Header Length : 00000030 [028h 0040 4] Reserved : 00000000 [02Ch 0044 4] Instruction Entry Count : 0000001B [030h 0048 1] Action : 00 [Begin Write Operation] [031h 0049 1] Instruction : 03 [Write Register Value] [032h 0050 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [033h 0051 1] Reserved : 00 [034h 0052 12] Register Region : [Generic Address Structure] [034h 0052 1] Space ID : 00 [SystemMemory] [035h 0053 1] Bit Width : 20 [036h 0054 1] Bit Offset : 00 [037h 0055 1] Encoded Access Width : 03 [DWord Access:32] [038h 0056 8] Address : 00000000FEBF3000 [040h 0064 8] Value : 0000000000000000 [048h 0072 8] Mask : 00000000000000FF [050h 0080 1] Action : 01 [Begin Read Operation] [051h 0081 1] Instruction : 03 [Write Register Value] [052h 0082 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [053h 0083 1] Reserved : 00 [054h 0084 12] Register Region : [Generic Address Structure] [054h 0084 1] Space ID : 00 [SystemMemory] [055h 0085 1] Bit Width : 20 [056h 0086 1] Bit Offset : 00 [057h 0087 1] Encoded Access Width : 03 [DWord Access:32] [058h 0088 8] Address : 00000000FEBF3000 [060h 0096 8] Value : 0000000000000001 [068h 0104 8] Mask : 00000000000000FF [070h 0112 1] Action : 02 [Begin Clear Operation] [071h 0113 1] Instruction : 03 [Write Register Value] [072h 0114 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [073h 0115 1] Reserved : 00 [074h 0116 12] Register Region : [Generic Address Structure] [074h 0116 1] Space ID : 00 [SystemMemory] [075h 0117 1] Bit Width : 20 [076h 0118 1] Bit Offset : 00 [077h 0119 1] Encoded Access Width : 03 [DWord Access:32] [078h 0120 8] Address : 00000000FEBF3000 [080h 0128 8] Value : 0000000000000002 [088h 0136 8] Mask : 00000000000000FF [090h 0144 1] Action : 03 [End Operation] [091h 0145 1] Instruction : 03 [Write Register Value] [092h 0146 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [093h 0147 1] Reserved : 00 [094h 0148 12] Register Region : [Generic Address Structure] [094h 0148 1] Space ID : 00 [SystemMemory] [095h 0149 1] Bit Width : 20 [096h 0150 1] Bit Offset : 00 [097h 0151 1] Encoded Access Width : 03 [DWord Access:32] [098h 0152 8] Address : 00000000FEBF3000 [0A0h 0160 8] Value : 0000000000000003 [0A8h 0168 8] Mask : 00000000000000FF [0B0h 0176 1] Action : 04 [Set Record Offset] [0B1h 0177 1] Instruction : 02 [Write Register] [0B2h 0178 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [0B3h 0179 1] Reserved : 00 [0B4h 0180 12] Register Region : [Generic Address Structure] [0B4h 0180 1] Space ID : 00 [SystemMemory] [0B5h 0181 1] Bit Width : 20 [0B6h 0182 1] Bit Offset : 00 [0B7h 0183 1] Encoded Access Width : 03 [DWord Access:32] [0B8h 0184 8] Address : 00000000FEBF3008 [0C0h 0192 8] Value : 0000000000000000 [0C8h 0200 8] Mask : 00000000FFFFFFFF [0D0h 0208 1] Action : 04 [Set Record Offset] [0D1h 0209 1] Instruction : 03 [Write Register Value] [0D2h 0210 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [0D3h 0211 1] Reserved : 00 [0D4h 0212 12] Register Region : [Generic Address Structure] [0D4h 0212 1] Space ID : 00 [SystemMemory] [0D5h 0213 1] Bit Width : 20 [0D6h 0214 1] Bit Offset : 00 [0D7h 0215 1] Encoded Access Width : 03 [DWord Access:32] [0D8h 0216 8] Address : 00000000FEBF3000 [0E0h 0224 8] Value : 0000000000000004 [0E8h 0232 8] Mask : 00000000000000FF [0F0h 0240 1] Action : 05 [Execute Operation] [0F1h 0241 1] Instruction : 03 [Write Register Value] [0F2h 0242 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [0F3h 0243 1] Reserved : 00 [0F4h 0244 12] Register Region : [Generic Address Structure] [0F4h 0244 1] Space ID : 00 [SystemMemory] [0F5h 0245 1] Bit Width : 20 [0F6h 0246 1] Bit Offset : 00 [0F7h 0247 1] Encoded Access Width : 03 [DWord Access:32] [0F8h 0248 8] Address : 00000000FEBF3008 [100h 0256 8] Value : 000000000000009C [108h 0264 8] Mask : 00000000000000FF [110h 0272 1] Action : 05 [Execute Operation] [111h 0273 1] Instruction : 03 [Write Register Value] [112h 0274 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [113h 0275 1] Reserved : 00 [114h 0276 12] Register Region : [Generic Address Structure] [114h 0276 1] Space ID : 00 [SystemMemory] [115h 0277 1] Bit Width : 20 [116h 0278 1] Bit Offset : 00 [117h 0279 1] Encoded Access Width : 03 [DWord Access:32] [118h 0280 8] Address : 00000000FEBF3000 [120h 0288 8] Value : 0000000000000005 [128h 0296 8] Mask : 00000000000000FF [130h 0304 1] Action : 06 [Check Busy Status] [131h 0305 1] Instruction : 03 [Write Register Value] [132h 0306 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [133h 0307 1] Reserved : 00 [134h 0308 12] Register Region : [Generic Address Structure] [134h 0308 1] Space ID : 00 [SystemMemory] [135h 0309 1] Bit Width : 20 [136h 0310 1] Bit Offset : 00 [137h 0311 1] Encoded Access Width : 03 [DWord Access:32] [138h 0312 8] Address : 00000000FEBF3000 [140h 0320 8] Value : 0000000000000006 [148h 0328 8] Mask : 00000000000000FF [150h 0336 1] Action : 06 [Check Busy Status] [151h 0337 1] Instruction : 01 [Read Register Value] [152h 0338 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [153h 0339 1] Reserved : 00 [154h 0340 12] Register Region : [Generic Address Structure] [154h 0340 1] Space ID : 00 [SystemMemory] [155h 0341 1] Bit Width : 20 [156h 0342 1] Bit Offset : 00 [157h 0343 1] Encoded Access Width : 03 [DWord Access:32] [158h 0344 8] Address : 00000000FEBF3008 [160h 0352 8] Value : 0000000000000001 [168h 0360 8] Mask : 00000000000000FF [170h 0368 1] Action : 07 [Get Command Status] [171h 0369 1] Instruction : 03 [Write Register Value] [172h 0370 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [173h 0371 1] Reserved : 00 [174h 0372 12] Register Region : [Generic Address Structure] [174h 0372 1] Space ID : 00 [SystemMemory] [175h 0373 1] Bit Width : 20 [176h 0374 1] Bit Offset : 00 [177h 0375 1] Encoded Access Width : 03 [DWord Access:32] [178h 0376 8] Address : 00000000FEBF3000 [180h 0384 8] Value : 0000000000000007 [188h 0392 8] Mask : 00000000000000FF [190h 0400 1] Action : 07 [Get Command Status] [191h 0401 1] Instruction : 00 [Read Register] [192h 0402 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [193h 0403 1] Reserved : 00 [194h 0404 12] Register Region : [Generic Address Structure] [194h 0404 1] Space ID : 00 [SystemMemory] [195h 0405 1] Bit Width : 20 [196h 0406 1] Bit Offset : 00 [197h 0407 1] Encoded Access Width : 03 [DWord Access:32] [198h 0408 8] Address : 00000000FEBF3008 [1A0h 0416 8] Value : 0000000000000000 [1A8h 0424 8] Mask : 00000000000000FF [1B0h 0432 1] Action : 08 [Get Record Identifier] [1B1h 0433 1] Instruction : 03 [Write Register Value] [1B2h 0434 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [1B3h 0435 1] Reserved : 00 [1B4h 0436 12] Register Region : [Generic Address Structure] [1B4h 0436 1] Space ID : 00 [SystemMemory] [1B5h 0437 1] Bit Width : 20 [1B6h 0438 1] Bit Offset : 00 [1B7h 0439 1] Encoded Access Width : 03 [DWord Access:32] [1B8h 0440 8] Address : 00000000FEBF3000 [1C0h 0448 8] Value : 0000000000000008 [1C8h 0456 8] Mask : 00000000000000FF [1D0h 0464 1] Action : 08 [Get Record Identifier] [1D1h 0465 1] Instruction : 00 [Read Register] [1D2h 0466 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [1D3h 0467 1] Reserved : 00 [1D4h 0468 12] Register Region : [Generic Address Structure] [1D4h 0468 1] Space ID : 00 [SystemMemory] [1D5h 0469 1] Bit Width : 40 [1D6h 0470 1] Bit Offset : 00 [1D7h 0471 1] Encoded Access Width : 04 [QWord Access:64] [1D8h 0472 8] Address : 00000000FEBF3008 [1E0h 0480 8] Value : 0000000000000000 [1E8h 0488 8] Mask : FFFFFFFFFFFFFFFF [1F0h 0496 1] Action : 09 [Set Record Identifier] [1F1h 0497 1] Instruction : 02 [Write Register] [1F2h 0498 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [1F3h 0499 1] Reserved : 00 [1F4h 0500 12] Register Region : [Generic Address Structure] [1F4h 0500 1] Space ID : 00 [SystemMemory] [1F5h 0501 1] Bit Width : 40 [1F6h 0502 1] Bit Offset : 00 [1F7h 0503 1] Encoded Access Width : 04 [QWord Access:64] [1F8h 0504 8] Address : 00000000FEBF3008 [200h 0512 8] Value : 0000000000000000 [208h 0520 8] Mask : FFFFFFFFFFFFFFFF [210h 0528 1] Action : 09 [Set Record Identifier] [211h 0529 1] Instruction : 03 [Write Register Value] [212h 0530 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [213h 0531 1] Reserved : 00 [214h 0532 12] Register Region : [Generic Address Structure] [214h 0532 1] Space ID : 00 [SystemMemory] [215h 0533 1] Bit Width : 20 [216h 0534 1] Bit Offset : 00 [217h 0535 1] Encoded Access Width : 03 [DWord Access:32] [218h 0536 8] Address : 00000000FEBF3000 [220h 0544 8] Value : 0000000000000009 [228h 0552 8] Mask : 00000000000000FF [230h 0560 1] Action : 0A [Get Record Count] [231h 0561 1] Instruction : 03 [Write Register Value] [232h 0562 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [233h 0563 1] Reserved : 00 [234h 0564 12] Register Region : [Generic Address Structure] [234h 0564 1] Space ID : 00 [SystemMemory] [235h 0565 1] Bit Width : 20 [236h 0566 1] Bit Offset : 00 [237h 0567 1] Encoded Access Width : 03 [DWord Access:32] [238h 0568 8] Address : 00000000FEBF3000 [240h 0576 8] Value : 000000000000000A [248h 0584 8] Mask : 00000000000000FF [250h 0592 1] Action : 0A [Get Record Count] [251h 0593 1] Instruction : 00 [Read Register] [252h 0594 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [253h 0595 1] Reserved : 00 [254h 0596 12] Register Region : [Generic Address Structure] [254h 0596 1] Space ID : 00 [SystemMemory] [255h 0597 1] Bit Width : 20 [256h 0598 1] Bit Offset : 00 [257h 0599 1] Encoded Access Width : 03 [DWord Access:32] [258h 0600 8] Address : 00000000FEBF3008 [260h 0608 8] Value : 0000000000000000 [268h 0616 8] Mask : 00000000FFFFFFFF [270h 0624 1] Action : 0B [Begin Dummy Write] [271h 0625 1] Instruction : 03 [Write Register Value] [272h 0626 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [273h 0627 1] Reserved : 00 [274h 0628 12] Register Region : [Generic Address Structure] [274h 0628 1] Space ID : 00 [SystemMemory] [275h 0629 1] Bit Width : 20 [276h 0630 1] Bit Offset : 00 [277h 0631 1] Encoded Access Width : 03 [DWord Access:32] [278h 0632 8] Address : 00000000FEBF3000 [280h 0640 8] Value : 000000000000000B [288h 0648 8] Mask : 00000000000000FF [290h 0656 1] Action : 0D [Get Error Address Range] [291h 0657 1] Instruction : 03 [Write Register Value] [292h 0658 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [293h 0659 1] Reserved : 00 [294h 0660 12] Register Region : [Generic Address Structure] [294h 0660 1] Space ID : 00 [SystemMemory] [295h 0661 1] Bit Width : 20 [296h 0662 1] Bit Offset : 00 [297h 0663 1] Encoded Access Width : 03 [DWord Access:32] [298h 0664 8] Address : 00000000FEBF3000 [2A0h 0672 8] Value : 000000000000000D [2A8h 0680 8] Mask : 00000000000000FF [2B0h 0688 1] Action : 0D [Get Error Address Range] [2B1h 0689 1] Instruction : 00 [Read Register] [2B2h 0690 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [2B3h 0691 1] Reserved : 00 [2B4h 0692 12] Register Region : [Generic Address Structure] [2B4h 0692 1] Space ID : 00 [SystemMemory] [2B5h 0693 1] Bit Width : 40 [2B6h 0694 1] Bit Offset : 00 [2B7h 0695 1] Encoded Access Width : 04 [QWord Access:64] [2B8h 0696 8] Address : 00000000FEBF3008 [2C0h 0704 8] Value : 0000000000000000 [2C8h 0712 8] Mask : FFFFFFFFFFFFFFFF [2D0h 0720 1] Action : 0E [Get Error Address Length] [2D1h 0721 1] Instruction : 03 [Write Register Value] [2D2h 0722 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [2D3h 0723 1] Reserved : 00 [2D4h 0724 12] Register Region : [Generic Address Structure] [2D4h 0724 1] Space ID : 00 [SystemMemory] [2D5h 0725 1] Bit Width : 20 [2D6h 0726 1] Bit Offset : 00 [2D7h 0727 1] Encoded Access Width : 03 [DWord Access:32] [2D8h 0728 8] Address : 00000000FEBF3000 [2E0h 0736 8] Value : 000000000000000E [2E8h 0744 8] Mask : 00000000000000FF [2F0h 0752 1] Action : 0E [Get Error Address Length] [2F1h 0753 1] Instruction : 00 [Read Register] [2F2h 0754 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [2F3h 0755 1] Reserved : 00 [2F4h 0756 12] Register Region : [Generic Address Structure] [2F4h 0756 1] Space ID : 00 [SystemMemory] [2F5h 0757 1] Bit Width : 40 [2F6h 0758 1] Bit Offset : 00 [2F7h 0759 1] Encoded Access Width : 04 [QWord Access:64] [2F8h 0760 8] Address : 00000000FEBF3008 [300h 0768 8] Value : 0000000000000000 [308h 0776 8] Mask : 00000000FFFFFFFF [310h 0784 1] Action : 0F [Get Error Attributes] [311h 0785 1] Instruction : 03 [Write Register Value] [312h 0786 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [313h 0787 1] Reserved : 00 [314h 0788 12] Register Region : [Generic Address Structure] [314h 0788 1] Space ID : 00 [SystemMemory] [315h 0789 1] Bit Width : 20 [316h 0790 1] Bit Offset : 00 [317h 0791 1] Encoded Access Width : 03 [DWord Access:32] [318h 0792 8] Address : 00000000FEBF3000 [320h 0800 8] Value : 000000000000000F [328h 0808 8] Mask : 00000000000000FF [330h 0816 1] Action : 0F [Get Error Attributes] [331h 0817 1] Instruction : 00 [Read Register] [332h 0818 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [333h 0819 1] Reserved : 00 [334h 0820 12] Register Region : [Generic Address Structure] [334h 0820 1] Space ID : 00 [SystemMemory] [335h 0821 1] Bit Width : 20 [336h 0822 1] Bit Offset : 00 [337h 0823 1] Encoded Access Width : 03 [DWord Access:32] [338h 0824 8] Address : 00000000FEBF3008 [340h 0832 8] Value : 0000000000000000 [348h 0840 8] Mask : 00000000FFFFFFFF [350h 0848 1] Action : 10 [Execute Timings] [351h 0849 1] Instruction : 03 [Write Register Value] [352h 0850 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [353h 0851 1] Reserved : 00 [354h 0852 12] Register Region : [Generic Address Structure] [354h 0852 1] Space ID : 00 [SystemMemory] [355h 0853 1] Bit Width : 20 [356h 0854 1] Bit Offset : 00 [357h 0855 1] Encoded Access Width : 03 [DWord Access:32] [358h 0856 8] Address : 00000000FEBF3000 [360h 0864 8] Value : 0000000000000010 [368h 0872 8] Mask : 00000000000000FF [370h 0880 1] Action : 10 [Execute Timings] [371h 0881 1] Instruction : 00 [Read Register] [372h 0882 1] Flags (decoded below) : 00 Preserve Register Bits : 0 [373h 0883 1] Reserved : 00 [374h 0884 12] Register Region : [Generic Address Structure] [374h 0884 1] Space ID : 00 [SystemMemory] [375h 0885 1] Bit Width : 40 [376h 0886 1] Bit Offset : 00 [377h 0887 1] Encoded Access Width : 04 [QWord Access:64] [378h 0888 8] Address : 00000000FEBF3008 [380h 0896 8] Value : 0000000000000000 [388h 0904 8] Mask : FFFFFFFFFFFFFFFF Raw Table Data: Length 912 (0x390) Note that the contents of tests/data/q35/ERST.acpierst and tests/data/microvm/ERST.pcie are the same except for differences due to assigned base address. Files tests/data/pc/DSDT.acpierst and tests/data/acpi/q35/DSDT.acpierst are new files (and are included as a result of 'make check' process). Rather than provide the entire content, I am providing the differences between pc/DSDT and pc/DSDT.acpierst, and the difference between q35/DSDT and q35/DSDT.acpierst, with an explanation to follow. diff pc/DSDT pc/DSDT.acpierst: @@ -5,13 +5,13 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/pc/DSDT, Thu Dec 2 10:10:13 2021 + * Disassembly of tests/data/acpi/pc/DSDT.acpierst, Thu Dec 2 12:59:36 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00001772 (6002) + * Length 0x00001751 (5969) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0x9E + * Checksum 0x95 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -964,16 +964,11 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS " Device (S18) { - Name (_SUN, 0x03) // _SUN: Slot User Number Name (_ADR, 0x00030000) // _ADR: Address - Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device - { - PCEJ (BSEL, _SUN) - } - + Name (ASUN, 0x03) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { - Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, _SUN)) + Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, ASUN)) } } @@ -1399,11 +1394,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS " Method (DVNT, 2, NotSerialized) { - If ((Arg0 & 0x08)) - { - Notify (S18, Arg1) - } - If ((Arg0 & 0x10)) { Notify (S20, Arg1) diff q35/DSDT and q35/DSDT.acpierst: @@ -5,13 +5,13 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT, Thu Dec 2 10:10:13 2021 + * Disassembly of tests/data/acpi/q35/DSDT.acpierst, Thu Dec 2 12:59:36 2021 * * Original Table Header: * Signature "DSDT" - * Length 0x00002061 (8289) + * Length 0x00002072 (8306) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0xFA + * Checksum 0x9A * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) @@ -3278,6 +3278,11 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS " } } + Device (S10) + { + Name (_ADR, 0x00020000) // _ADR: Address + } + Method (PCNT, 0, NotSerialized) { } For both pc and q35, there is but a small difference between this DSDT.acpierst and the corresponding DSDT. In both cases, the changes occur under the hiearchy: Scope (\_SB) { Scope (PCI0) { which leads me to believe that the change to the DSDT was needed due to the introduction of the ERST PCI device. And is explained in detail by Ani Sinha: I have convinced myself of the changes we see in the DSDT tables. On i440fx side, we are adding a non-hotpluggable pci device on slot 3. So the changes we see are basically replacing an empty hotpluggable slot on the pci root port with a non-hotplugggable device. On q35, bsel on pcie root bus is not set (its not hotpluggable bus), so the change basically adds the address enumeration for the device. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-11-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06ACPI ERST: bios-tables-test testcaseEric DeVolder
This change implements the test suite checks for the ERST table. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06ACPI ERST: qtest for ERSTEric DeVolder
This change provides a qtest that locates and then does a simple interrogation of the ERST feature within the guest. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06ACPI ERST: bios-tables-test.c steps 1 and 2Eric DeVolder
Following the guidelines in tests/qtest/bios-tables-test.c, this change adds empty placeholder files per step 1 for the new ERST table, and excludes resulting changed files in bios-tables-test-allowed-diff.h per step 2. Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()Igor Mammedov
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID values used in test_oem_fields() testcase to avoid false positive and bisection issues when QEMU is switched to \0' padding. As result testcase ceased to test values that were shorter than max possible length values. Update testcase to make sure that it's testing shorter IDs like it used to before [2]. 1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test" 2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220114142641.1727679-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04tests: acpi: update expected blobsIgor Mammedov
Expected changes caused by previous commit: nvdimm ssdt (q35/pc/virt): - * OEM Table ID "NVDIMM " + * OEM Table ID "NVDIMM" SLIC test FADT (tests/data/acpi/q35/FACP.slic): -[010h 0016 8] Oem Table ID : "ME " +[010h 0016 8] Oem Table ID : "ME" Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220112130332.1648664-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04tests: acpi: whitelist nvdimm's SSDT and FACP.slic expected blobsIgor Mammedov
The next commit will revert OEM fields whitespace padding to padding with '\0' as it was before [1]. That will change OEM Table ID for: * SSDT.*: where it was padded from 6 characters to 8 * FACP.slic: where it was padded from 2 characters to 8 after reverting whitespace padding, it will be replaced with '\0' which effectively will shorten OEM table ID to 6 and 2 characters. Whitelist affected tables before introducing the change. 1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220112130332.1648664-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() testIgor Mammedov
The next commit will revert OEM fields padding with whitespace to padding with '\0' as it was before [1]. As result test_oem_fields() will fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables. Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test puts on QEMU CLI and expected values match. 1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220112130332.1648664-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04hw/i386: Add the possibility to disable the 'isapc' machineThomas Huth
We already have a CONFIG_ISAPC switch - but we're not using it yet. Add some "#ifdefs" to make it possible to disable this machine now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220107160713.235918-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-27build-sys: fix a meson deprecation warningMarc-André Lureau
WARNING: Deprecated features used: * 0.56.0: {'meson.source_root'} Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220113162148.3621818-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-14softmmu: fix device deletion events with -device JSON syntaxDaniel P. Berrangé
The -device JSON syntax impl leaks a reference on the created DeviceState instance. As a result when you hot-unplug the device, the device_finalize method won't be called and thus it will fail to emit the required DEVICE_DELETED event. A 'json-cli' feature was previously added against the 'device_add' QMP command QAPI schema to indicated to mgmt apps that -device supported JSON syntax. Given the hotplug bug that feature flag is not usable for its purpose, so we add a new 'json-cli-hotplug' feature to indicate the -device supports JSON without breaking hotplug. Fixes: 5dacda5167560b3af8eadbce5814f60ba44b467e Resolves: https://gitlab.com/qemu-project/qemu/-/issues/802 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20220105123847.4047954-2-berrange@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-12meson: build all modules by defaultPaolo Bonzini
With more recent versions of Meson, the build.ninja file is more selective as to what is built by default, and not building the modules results in test failures. Mark the modules as built-by-default and, to make the dependencies more precise, also require them to be up-to-date before running tests. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/801 Tested-by: Li Zhang <lizhang@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07tests: acpi: Add updated TPM related tablesStefan Berger
The updated TPM related tables have the following additions: Device (TPM) { Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID + Name (_STR, "TPM 2.0 Device") // _STR: Description String + Name (_UID, One) // _UID: Unique ID Name (_STA, 0x0F) // _STA: Status Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Ani Sinha <ani@anisinha.ca> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-id: 20211223022310.575496-4-stefanb@linux.ibm.com Message-Id: <20220104175806.872996-4-stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07tests: acpi: prepare for updated TPM related tablesStefan Berger
Replace existing TPM related tables, that are about to change, with empty files. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Ani Sinha <ani@anisinha.ca> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Ani Sinha <ani@anisinha.ca> Message-id: 20211223022310.575496-2-stefanb@linux.ibm.com Message-Id: <20220104175806.872996-2-stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
2022-01-07tests: acpi: SLIC: update expected blobsIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20211227193120.1084176-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07tests: acpi: add SLIC table testIgor Mammedov
When user uses '-acpitable' to add SLIC table, some ACPI tables (FADT) will change its 'Oem ID'/'Oem Table ID' fields to match that of SLIC. Test makes sure thati QEMU handles those fields correctly when SLIC table is added with '-acpitable' option. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20211227193120.1084176-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07tests: acpi: whitelist expected blobs before changing themIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20211227193120.1084176-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-05tests/qtest/hd-geo-test: Check for the lsi53c895a controller before using itThomas Huth
The lsi53c895a SCSI controller might have been disabled in the target binary, so let's check for its availability first before using it. Message-Id: <20211222153600.976588-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-01-05tests/qtest/test-x86-cpuid-compat: Check for machines before using themThomas Huth
The user might have disabled the pc-i440fx machine type (or it's older versions, like done in downstream RHEL) in the QEMU binary, so let's better check whether the machine types are available before using them. Message-Id: <20211222153923.1000420-1-thuth@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest/virtio-net-failover: Use g_file_open_tmp() to create temporary fileThomas Huth
g_test_rand_int() must not be called before g_test_init(), otherwise the glib will show a "g_rand_int: assertion 'rand != NULL' failed" message in the log. So we could change the order here, but actually, it's safer to use g_file_open_tmp() anyway, so let's use that function now instead. Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211222083652.776592-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest/boot-order-test: Check whether machines are availableThomas Huth
Machines might not always be compiled into the QEMU binary, so we should skip the test instead of failing if it is not available. Message-Id: <20211220081054.151515-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest/cdrom-test: Check whether devices are available before using themThomas Huth
Downstream users might want to disable legacy devices in their binaries, so we should not blindly assume that they are available. Add some proper checks before using them. Message-Id: <20211220081054.151515-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest: Improve endianness-test to work with missing machines and devicesThomas Huth
The users might have built QEMU with less machines or without the i82378 superio device. Add some checks to the endianess-test so that it is able to deal with such stripped down QEMU versions, too. Message-Id: <20211220081054.151515-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest: Add a function that checks whether a device is availableThomas Huth
Devices might not always be compiled into the QEMU target binaries. We already have the libqos framework that is good for handling such situations, but some of the qtests are not a real good fit for the libqos framework. Let's add a qtest_has_device() function for such tests instead. Message-Id: <20211220081054.151515-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest: Make the filter tests independent from a specific NICThomas Huth
These filter tests need a NIC, no matter which one, so they use a common NIC by default. However, these common NIC models might not always have been compiled into the QEMU target binary, so assuming that a certain NIC is available is a bad idea. Since the exact type of NIC does not really matter for these tests, let's switch to "-nic" instead of "-netdev" so that QEMU can simply pick a default NIC for us. This way we can now run the tests on other targets that have a default machine with an on-board/default NIC, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211220103025.311759-1-thuth@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-22tests/qtest/boot-serial-test: Silence the warning about deprecated sga deviceThomas Huth
When running the qtests, there are currently a bunch of warnings about the deprecated sga device during the boot-serial-test. Switch to "-M graphics=off" to silence these warnings. Message-Id: <20211220164042.397028-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-21tests: start dbus-display-testMarc-André Lureau
Cover basic display interface usage. More cases to be added to cover disconnections, multiple connections, corner cases. At this point, they would be better written in Rust or Python though. The proxy also covers reading the properties, since they are automatically loaded at creation. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2021-12-21tests/qtests: add qtest_qmp_add_client()Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2021-12-21backends: move dbus-vmstate1.xml to backends/Marc-André Lureau
Although not used by the backend itself, use a common location for documentation and sharing purposes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2021-12-18tests/qtest/fuzz-megasas-test: Add test for GitLab issue #521Philippe Mathieu-Daudé
Without the previous commit, this test triggers: $ make check-qtest-x86_64 [...] Running test qtest-x86_64/fuzz-megasas-test qemu-system-x86_64: softmmu/physmem.c:3229: address_space_unmap: Assertion `mr != NULL' failed. Broken pipe ERROR qtest-x86_64/fuzz-megasas-test - too few tests run (expected 2, got 1) Suggested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Message-Id: <20211119201141.532377-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-17Merge tag 'trivial-branch-for-7.0-pull-request' of ↵Richard Henderson
https://gitlab.com/laurent_vivier/qemu into staging Trivial patches pull request 20211217 # gpg: Signature made Fri 17 Dec 2021 12:09:51 PM PST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [unknown] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [unknown] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'trivial-branch-for-7.0-pull-request' of https://gitlab.com/laurent_vivier/qemu: checkpatch: Do not allow deprecated g_memdup() tests/qtest: Replace g_memdup() by g_memdup2() glib-compat: Introduce g_memdup2() wrapper docs/block-replication.txt: Fix replication top-id command demo hw/virtio/vhost: Fix typo in comment. hw/avr: Realize AVRCPU qdev object using qdev_realize() qemu-keymap: Add license in generated files target/i386/kvm: Replace use of __u32 type configure: Symlink binaries using .exe suffix with MinGW Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 21:48:23 +0000