| Age | Commit message (Collapse) | Author |
|---|
|
handle_qmp_command() reports certain errors right away. This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.
To fix, we need to delay errors until dispatch. Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d53172
"qmp: support out-of-band (oob) execution". Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch(). That's also due to commit cf869d53172.
The next commit will fix queue jumping for syntax errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>
|
|
When OOB is enabled, out-of-band commands are executed right away,
everything else is queued. This lets out-of-band commands "jump the
queue".
However, certain errors are always reported right away, and therefore
can jump the queue even when the erroneous input does not request
out-of-band execution. These errors are pretty unlikely to occur in
production, but it's wrong all the same. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180703085358.13941-17-armbru@redhat.com>
|
|
Commit cf869d53172 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-7-armbru@redhat.com>
|
|
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command. To do that, it needs:
1. An in-band command that *reliably* takes long enough to be
overtaken.
2. An out-of-band command to do the overtaking.
3. To avoid delays, a way to make the in-band command complete quickly
after it was overtaken.
To satisfy these needs, commit 469638f9cb3 provides the rather
peculiar oob-capable QMP command x-oob-test:
* With "lock": true, it waits for a global semaphore.
* With "lock": false, it signals the global semaphore.
To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.
Note that waiting for a semaphore violates the rules for oob-capable
commands. Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).
Having an externally visible QMP command that may hang the monitor is
not nice. Let's apply a little more ingenuity to the problem. Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.
For 1., use
{"execute": "blockdev-add", "id": ID1,
"arguments": {
"driver": "blkdebug", "node-name": ID1, "config": FIFO,
"image": { "driver": "null-co"}}}
where ID1 is an arbitrary string, and FIFO is the name of the FIFO.
For 2., use
{"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}
where ID2 is a different arbitrary string. Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.
For 3., open FIFO for writing.
Drop QMP command x-oob-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
|
|
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
|
|
* start QEMU with 2 unmapped cpus,
* while in preconfig state
* add 2 numa nodes
* assign cpus to them
* exit preconfig and in running state check that cpus
are mapped correctly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526556607-268163-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add permission checks for commands at 'preconfig' stage.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526556524-267991-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Test the new OOB capability. It's mostly the reverted OOB test
(see commit 4fd78ad7), but differs in that:
- It uses the new qtest_init_without_qmp_handshake() parameter to
create the monitor with "x-oob"
- Squashed the capability tests on greeting message
- Don't use qtest_global any more, instead use self-maintained
QTestState, which is the trend
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-9-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qtest_init changes]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Allow callers to choose whether to allow OOB support during a test;
for now, all existing callers pass false, but the next patch will
add a new caller. Also, rewrite the monitor setup to be generic
(using the -qmp shorthand is insufficient for honoring the parameter).
Based on an idea by Peter Xu, in <20180326063901.27425-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180327013620.1644387-4-eblake@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Apparently introduced in commit a4f90923b520f1dc0a768634877eb412e5052c26.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326172041.21009-1-marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This reverts commit 3fd2457d18edf5736f713dfe1ada9c87a9badab1.
Enabling OOB caused several iotests failures; due to the imminent
2.12 release, the safest action is to disable OOB for now. If
other patches fix the issues that iotests exposed, it may be turned
back on in time for the release, otherwise it will be 2.13 material;
either way, the framework changes not reverted now do not hurt if
they remain as part of the 2.12 release.
Additionally, revert the tests in the patch 02130314d8 ("qmp: introduce
QMPCapability", 2018-03-19), as both parts must be reverted at once
to keep 'make check' passing.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180323140821.28957-2-peterx@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
[eblake: reorder/squash commits, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This reverts commit 91ad45061af0fe44ac5dadb5bedaf4d7a08077c8.
Enabling OOB caused several iotests failures; due to the imminent
2.12 release, the safest action is to disable OOB, but first we
have to revert tests that rely on OOB.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180323140821.28957-4-peterx@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
[eblake: reorder commits, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This reverts commit d003f7a8f9cafe50119975844fa01afc2baf41fb.
Enabling OOB caused several iotests failures; due to the imminent
2.12 release, the safest action is to disable OOB, but first we
have to revert tests that rely on OOB.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180323140821.28957-3-peterx@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
[eblake: reorder commits, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Test the new OOB capability. Here we used the new "x-oob-test" command.
First, we send a lock=true and oob=false command to hang the main
thread. Then send another lock=false and oob=true command (which will
be run inside parser this time) to free that hanged command.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-24-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
OOB introduced DROP event for flow control. This should not affect old
QMP clients. Add a command batching check to make sure of it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-23-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
As a general rule, we prefer avoiding implicit global state
because it makes code harder to safely copy and paste without
thinking about the global state. Although qmp-test does not
maintain parallel qtest connections, it was the last test
assigning to global_qtest. It's just as easy to be explicit
about the state; once all tests have been cleaned up, a later
patch can then get rid of global_qtest and a layer of wrappers
in libqtest.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
|
|
Direct leak of 913 byte(s) in 43 object(s) allocated from:
#0 0x55880a15df60 in __interceptor_malloc (/home/elmarco/src/qq/build/tests/qmp-test+0x110f60)
#1 0x7f3f20fd098f in _IO_vasprintf (/lib64/libc.so.6+0x8098f)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
|
|
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
|
|
A command is a query if it has no side effect and yields a result.
Such commands are typically named query-FOO, but there are exceptions.
The basic idea is to find candidates with query-qmp-schema, filter out
the ones that aren't queries with an explicit blacklist, and test the
remaining ones against a QEMU with no special arguments.
The current blacklist is just add-fd.
The test can't do queries with arguments, because it knows nothing
about the arguments. No coverage for query-cpu-model-baseline,
query-cpu-model-comparison, query-cpu-model-expansion, query-rocker,
query-rocker-ports, query-rocker-of-dpa-flows, and
query-rocker-of-dpa-groups.
Most tested commands are expected to succeed. The test does not check
the return value then.
query-balloon and query-vm-generation-id are expected to fail because
they need a virtio-balloon / vmgenid device to succeed, and this test
is too dumb to set one up. Could be addressed later.
query-acpi-ospm-status and query-hotpluggable-cpus are expected to
fail because they require features provided only by special machine
types, and this test is too dumb to set that up. Could also be
addressed later.
Several commands may either be functional or stubs that always fail,
depending on build configuration. Ideally, the stubs shouldn't be in
query-qmp-schema, but that requires QAPI schema compile-time
configuration, which we don't have, yet. Until we do, we need to
figure out whether a command is a stub. When we have a suitable
CONFIG_FOO preprocessor symbol is available, use that. Else,
simply blacklist the command for now.
We get basic test coverage for the following commands, except as
noted:
qom-list-types
query-acpi-ospm-status (expected to fail)
query-balloon (expected to fail)
query-block
query-block-jobs
query-blockstats
query-chardev
query-chardev-backends
query-command-line-options
query-commands
query-cpu-definitions (blacklisted for now)
query-cpus
query-dump
query-dump-guest-memory-capability
query-events
query-fdsets
query-gic-capabilities (blacklisted for now)
query-hotpluggable-cpus (expected to fail)
query-iothreads
query-kvm
query-machines
query-memdev
query-memory-devices
query-mice
query-migrate
query-migrate-cache-size
query-migrate-capabilities
query-migrate-parameters
query-name
query-named-block-nodes
query-pci (blacklisted for now)
query-qmp-schema
query-rx-filter
query-spice
query-status
query-target
query-tpm
query-tpm-models
query-tpm-types
query-uuid
query-version
query-vm-generation-id (expected to fail)
query-vnc
query-vnc-servers
query-xen-replication-status
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1502461148-10154-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Typos in code under #ifndef and in the commit message fixed]
|
|
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-4-git-send-email-armbru@redhat.com>
|
