| Age | Commit message (Collapse) | Author |
|---|
|
It is interesting to know whether the shutdown cause was 'quit' or
'reset', especially when using "--no-reboot". In that case, a management
layer can now determine if the guest wanted a reboot or shutdown, and
can act accordingly.
Changes the output of the reason in the iotests from 'host-qmp' to
'host-qmp-quit'. This does not break compatibility because
the field was introduced in the same version.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-4-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This makes it possible to determine what the exact reason was for
a RESET or a SHUTDOWN. A management layer might need the specific reason
of those events to determine which cleanups or other actions it needs to do.
This patch also updates the iotests to the new expected output that includes
the reason.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host. While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management. The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.
Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.
Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).
Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:
event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}
Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup. Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.
See also https://bugzilla.redhat.com/1384007
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This enables byte granularity requests for blkverify, and at the same
time gets us rid of another user of the BDS-level AIO emulation.
The reference output of a test case must be changed because the
verification failure message reports byte offsets instead of sectors
now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Commit 3ff2f67a changed bdrv_co_flush() so that no flush is issues if
the image hasn't been dirtied since the last flush. This is not quite
correct: The condition should be that the image hasn't been dirtied
since the last _successful_ flush. This patch changes the logic
accordingly.
Without this fix, subsequent bdrv_co_flush() calls would return success
without actually doing anything even though the image is still dirty.
The difference is visible in some blkdebug test cases where error
messages incorrectly disappeared after commit 3ff2f67a.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1478300595-10090-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Tests 071 and 081 test giving references in blockdev-add. It is not
necessary to create a BlockBackend here, so omit it.
While at it, fix up some blockdev-add invocations in the vicinity
(s/raw/$IMGFMT/ in 081, drop the format BDS for blkverify's raw child in
071).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch fixes an io test suite issue that was introduced with the
commit c88930a6866e74953e931ae749781e98e486e5c8 'qemu-char: Permit only
a single "stdio" character device'. The option supresses the creation of
default devices such as the floopy and cdrom. Output files for test case
067, 071, 081 and 087 need to be updated to accommodate this change.
Use virtio-blk instead of virtio-blk-pci as the device driver for test
case 067. For virtio-blk-pci is the same with virtio-blk as device
driver but other platform such as s390 may not recognize the virtio-blk-pci.
The default devices differ across machines. As the qemu output often
contains these devices (or events for them, like opening a CD tray on
reset), the reference output currently is rather machine-specific.
All existing qemu tests explicitly configure the devices they're working
with, so just pass -nodefaults to qemu by default to disable the default
devices. Update the reference outputs accordingly.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Xiao Guang Chen <chenxg@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Filter out the "main loop: WARNING: I/O thread spun for..." warning from
qemu output (it hardly matters for code specifically testing I/O).
Furthermore, use _filter_qemu in all the custom functions which run
qemu.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is simply:
$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch changes $QEMU_IO so that all tests by default pass a format
argument to qemu-io.
There are a few cases where -f $IMGFMT is not wanted because it selects
the wrong driver or json: filenames including a driver are used. They
are changed to use $QEMU_IO_PROG, which doesn't include any options.
Tests 071 and 081 have output changes because now the actual request
fails instead of reading the 2k probing buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add a test for the new blkdebug/blkverify interface.
This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
