aboutsummaryrefslogtreecommitdiff
path: root/tests/migration
AgeCommit message (Collapse)Author
2021-03-18Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange-gitlab/tags/dep-many-pull-request' into staging Remove many old deprecated features The following features have been deprecated for well over the 2 release cycle we promise ``-drive file=json:{...{'driver':'file'}}`` (since 3.0) ``-vnc acl`` (since 4.0.0) ``-mon ...,control=readline,pretty=on|off`` (since 4.1) ``migrate_set_downtime`` and ``migrate_set_speed`` (since 2.8.0) ``query-named-block-nodes`` result ``encryption_key_missing`` (since 2.10.0) ``query-block`` result ``inserted.encryption_key_missing`` (since 2.10.0) ``migrate-set-cache-size`` and ``query-migrate-cache-size`` (since 2.11.0) ``query-named-block-nodes`` and ``query-block`` result dirty-bitmaps[i].status (since 4.0) ``query-cpus`` (since 2.12.0) ``query-cpus-fast`` ``arch`` output member (since 3.0.0) ``query-events`` (since 4.0) chardev client socket with ``wait`` option (since 4.0) ``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0) ``ide-drive`` (since 4.2) ``scsi-disk`` (since 4.2) # gpg: Signature made Thu 18 Mar 2021 09:23:39 GMT # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange-gitlab/tags/dep-many-pull-request: block: remove support for using "file" driver with block/char devices block: remove 'dirty-bitmaps' field from 'BlockInfo' struct block: remove dirty bitmaps 'status' field block: remove 'encryption_key_missing' flag from QAPI hw/scsi: remove 'scsi-disk' device hw/ide: remove 'ide-drive' device chardev: reject use of 'wait' flag for socket client chardevs machine: remove 'arch' field from 'query-cpus-fast' QMP command machine: remove 'query-cpus' QMP command migrate: remove QMP/HMP commands for speed, downtime and cache size monitor: remove 'query-events' QMP command monitor: raise error when 'pretty' option is used with HMP ui, monitor: remove deprecated VNC ACL option and HMP commands Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-18machine: remove 'query-cpus' QMP commandDaniel P. Berrangé
The newer 'query-cpus-fast' command avoids side effects on the guest execution. Note that some of the field names are different in the 'query-cpus-fast' command. Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-16tests/migration: fix unix socket batch migrationHyman
when execute the following test command: "guestperf-batch.py --dst-host localhost --transport unix ..." test aborts and error message as the following be throwed: "launching VM Failed: [Errno 98] Address already in use". The reason is that batch script use the same monitor socket in all test cases and do not remove the socket file. The second migration test will launch vm use the same socket file as the first, so we get the error message. To fix it, just remove the socket file each time we have done the migration test. Signed-off-by: Hyman <huangy81@chinatelecom.cn> Message-Id: <c3fc438993b87a6ab0bea3d07f6ca0260d29936e.1615397103.git.huangy81@chinatelecom.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2021-01-20tests: Rename PAGE_SIZE definitionsJiaxun Yang
As per POSIX specification of limits.h [1], OS libc may define PAGE_SIZE in limits.h. Self defined PAGE_SIZE is frequently used in tests, to prevent collosion of definition, we give PAGE_SIZE definitons reasonable prefixs. [1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210118063808.12471-7-jiaxun.yang@flygoat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-15Remove the deprecated -realtime optionThomas Huth
It has been marked as deprecated since QEMU v4.2, replaced by the -overcommit option. Time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210155808.233895-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15tests/migration: Fix LGPL information in the file headersGan Qixin
There never was a "Lesser GPL version 2.0", It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all "Lesser GPL version 2.0" with "Lesser GPL version 2.1" in the tests/migration folder. Signed-off-by: Gan Qixin <ganqixin@huawei.com> Message-Id: <20201110184223.549499-2-ganqixin@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-13Remove superfluous .gitignore filesThomas Huth
Since we are now always doing out-of-tree builds, these gitignore files should not be necessary anymore. Message-Id: <20200919133637.72744-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-08meson: convert migration/initrd-stressMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200828110734.1638685-17-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08meson: fix migration/stress compilation with glibc>=2.30Marc-André Lureau
gettid() was introduced with glibc 2.30. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200828110734.1638685-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08tests/migration/stress: remove unused exit_successMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200828110734.1638685-15-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-17tests/migration: fix unreachable path in stress testMao Zhongyi
If stressone() or stress() exits it's because of a failure because the test runs forever otherwise, so change stressone and stress type to void to make the exit_failure() as the exit function of main(). Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200603080904.997083-3-maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17tests/migration: mem leak fixMao Zhongyi
‘data’ has the possibility of memory leaks， so use the glib macros g_autofree recommended by CODING_STYLE.rst to automatically release the memory that returned from g_malloc(). Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200603080904.997083-2-maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-31tests/migration/guestperf: Use Python 3 interpreterPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200512103238.7078-7-philmd@redhat.com>
2020-02-07drop "from __future__ import print_function"Paolo Bonzini
This is only needed for Python 2, which we do not support anymore. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200204160604.19883-1-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-21tests/migration: fix a typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1d0aa8142a10edf735dac0a3330c46e98b06e8eb.1570208781.git.maozhongyi@cmss.chinamobile.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-19Replace '-machine accel=xyz' with '-accel xyz'Thomas Huth
We've got a separate option to configure the accelerator nowadays, which is shorter to type and the preferred way of specifying an accelerator. Use it in the source and examples to show that it is the favored option. (However, do not touch the places yet which also specify other machine options or multiple accelerators - these are currently still better handled with one single "-machine" statement instead) Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20190904052739.22123-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21test: Use g_strndup instead of plain strnduptony.nguyen@bt.com
Due to memory management rules. See HACKING. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <dce313b46d294ada8826d34609a3447e@tpw09926dag18e.domain1.systemhost.net> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-07-01python/qemu: split QEMUMachine out from underneath __init__.pyJohn Snow
It's not obvious that something named __init__.py actually houses important code that isn't relevant to python packaging glue. Move the QEMUMachine and related error classes out into their own module. Adjust users to the new import location. Signed-off-by: John Snow <jsnow@redhat.com> Message-Id: <20190627212816.27298-2-jsnow@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-12Clean up a few header guard symbolsMarkus Armbruster
Commit 58ea30f5145 "Clean up header guards that don't match their file name" messed up contrib/elf2dmp/qemu_elf.h and tests/migration/migration-test.h. It missed target/cris/opcode-cris.h and tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h due to the scripts/clean-header-guards.pl bug fixed in the previous commit. Commit a8b991b52dc "Clean up ill-advised or unusual header guards" missed include/hw/xen/io/ring.h for the same reason. Commit 3979fca4b69 "disas: Rename include/disas/bfd.h back to include/disas/dis-asm.h" neglected to update the guard symbol for the rename. Commit a331c6d7741 "semihosting: implement a semihosting console" created include/hw/semihosting/console.h with an ill-advised guard symbol. Clean them up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-13Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-6-armbru@redhat.com> [Rebase to master: update include/hw/net/ne2000-isa.h]
2019-02-22Introduce a Python module structureCleber Rosa
This is a simple move of Python code that wraps common QEMU functionality, and are used by a number of different tests and scripts. By treating that code as a real Python module, we can more easily: * reuse code * have a proper place for the module's own unittests * apply a more consistent style * generate documentation Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Caio Carrara <ccarrara@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190206162901.19082-2-crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2018-10-11migration-test: Only generate a single target architectureJuan Quintela
Several changes: - We only allow generate header "inside" the tree. Why? Because we need to connit the result, so it makes no sense to generate them on the build dir. - We only generate a single target each time. Getting all the cross-compilers correctly is an impossible task. So know you do: make -C tests/migration $target (native) make CROSS_PREFIX=foo- -C tests/migratiion $target (cross) And you are done. - If we are building out of tree, we have no data about if we are cross-compile or whatever. So instead of guess what is happening, just do what I pointed on previous point. Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20180913132313.11370-1-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-11tests/migration: Enable the migration test on s390x, tooThomas Huth
We can re-use the s390-ccw bios code to implement a small firmware for a s390x guest which prints out the "A" and "B" characters and modifies the memory, as required for the migration test. [quintela: Converted the compile script to Makefile rules] Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up Makefile since the aarch patch sneaked in first
2018-10-11tests: Add migration test for aarch64Wei Huang
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64: * We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64. * The serial output is sent to PL011 directly. * The physical memory base for mach-virt machine is 0x40000000. We change the start_address and end_address for aarch64. In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/aarch64. So users can change the source and/or re-compile the binary as they wish. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-10-03Revert "tests: migration/guestperf Python 2.6 argparse compatibility"Eduardo Habkost
This reverts commit 0ea47d0f36112f0f38661e2e430edf32737c7f43. scripts/argparse.py was removed from the tree, so we don't need this hack anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20180618225131.13113-4-ehabkost@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-09-26tests/migration: Add migration-test header fileWei Huang
This patch moves the settings related migration-test from the migration-test.c file to a new header file. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-26tests/migration: Support cross compilation in generating boot header fileWei Huang
Recently a new configure option, CROSS_CC_GUEST, was added to $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This patch tries to leverage this option to support cross compilation when the migration boot block file is being re-generated: * The x86 related files are moved to a new sub-dir (named ./i386). * A new top-layer Makefile is created in tests/migration/ directory. This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX. The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-26tests/migration: Convert x86 boot block compilation script into MakefileWei Huang
The x86 boot block header currently is generated with a shell script. To better support other CPUs (e.g. aarch64), we convert the script into Makefile. This allows us to 1) support cross-compilation easily, and 2) avoid creating a script file for every architecture. Note that, in the new design, the cross compiler prefix can be specified by setting the CROSS_PREFIX in "make" command. Also to allow gcc pre-processor to include the C-style file correctly, it also renames the x86-a-b-bootblock.s file extension from .s to .S. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1536174934-26022-2-git-send-email-wei@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-08python: futurize -f libfuturize.fixes.fix_print_with_importEduardo Habkost
Change all Python code to use print as a function. This is necessary for Python 3 compatibility. Done using: $ py=$( (g grep -l -E '^#!.*python';find -name '*.py' -printf '%P\n';) | \ sort -u | grep -v README.sh4) $ futurize -w -f libfuturize.fixes.fix_print_with_import $py Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20180608122952.2009-2-ehabkost@redhat.com> [ehabkost: fixup tests/docker/docker.py] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-02-14tests/migration: Add source to PC boot blockDr. David Alan Gilbert
The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message of ea0c6d62), change this to actually include the source. A script is added to rebuild the header but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180213100606.5379-1-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Removed blank line at end of script
2018-02-09Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2017-10-11scripts: Remove debug parameter from QEMUMachineEduardo Habkost
All scripts that use the QEMUMachine and QEMUQtestMachine classes (device-crash-test, tests/migration/*, iotests.py, basevm.py) already configure logging. The basicConfig() call inside QEMUMachine.__init__() is being kept just to make sure a script would still work if it didn't configure logging. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171005172013.3098-4-ehabkost@redhat.com> Reviewed-by: Lukáš Doktor <ldoktor@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-11guestperf: Configure logging on all shell frontendsEduardo Habkost
The logging module will eventually replace the 'debug' parameter in QEMUMachine and QEMUMonitorProtocol. Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171005172013.3098-2-ehabkost@redhat.com> Reviewed-by: Lukáš Doktor <ldoktor@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-08-30tests: migration/guestperf Python 2.6 argparse compatibilityStefan Hajnoczi
Add the scripts/ directory to sys.path so Python 2.6 will be able to import argparse. Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Message-id: 20170825155732.15665-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-22tests: introduce a framework for testing migration performanceDaniel P. Berrange
This introduces a moderately general purpose framework for testing performance of migration. The initial guest workload is provided by the included 'stress' program, which is configured to spawn one thread per guest CPU and run a maximally memory intensive workload. It will loop over GB of memory, xor'ing each byte with data from a 4k array of random bytes. This ensures heavy read and write load across all of guest memory to stress the migration performance. While running the 'stress' program will record how long it takes to xor each GB of memory and print this data for later reporting. The test engine will spawn a pair of QEMU processes, either on the same host, or with the target on a remote host via ssh, using the host kernel and a custom initrd built with 'stress' as the /init binary. Kernel command line args are set to ensure a fast kernel boot time (< 1 second) between launching QEMU and the stress program starting execution. None the less, the test engine will initially wait N seconds for the guest workload to stablize, before starting the migration operation. When migration is running, the engine will use pause, post-copy, autoconverge, xbzrle compression and multithread compression features, as well as downtime & bandwidth tuning to encourage completion. If migration completes, the test engine will wait N seconds again for the guest workooad to stablize on the target host. If migration does not complete after a preset number of iterations, it will be aborted. While the QEMU process is running on the source host, the test engine will sample the host CPU usage of QEMU as a whole, and each vCPU thread. While migration is running, it will record all the stats reported by 'query-migration'. Finally, it will capture the output of the stress program running in the guest. All the data produced from a single test execution is recorded in a structured JSON file. A separate program is then able to create interactive charts using the "plotly" python + javascript libraries, showing the characteristics of the migration. The data output provides visualization of the effect on guest vCPU workloads from the migration process, the corresponding vCPU utilization on the host, and the overall CPU hit from QEMU on the host. This is correlated from statistics from the migration process, such as downtime, vCPU throttling and iteration number. While the tests can be run individually with arbitrary parameters, there is also a facility for producing batch reports for a number of pre-defined scenarios / comparisons, in order to be able to get standardized results across different hardware configurations (eg TCP vs RDMA, or comparing different VCPU counts / memory sizes, etc). To use this, first you must build the initrd image $ make tests/migration/initrd-stress.img To run a a one-shot test with all default parameters $ ./tests/migration/guestperf.py > result.json This has many command line args for varying its behaviour. For example, to increase the RAM size and CPU count and bind it to specific host NUMA nodes $ ./tests/migration/guestperf.py \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 \ > result.json Using mem + cpu binding is strongly recommended on NUMA machines, otherwise the guest performance results will vary wildly between runs of the test due to lucky/unlucky NUMA placement, making sensible data analysis impossible. To make it run across separate hosts: $ ./tests/migration/guestperf.py \ --dst-host somehostname > result.json To request that post-copy is enabled, with switchover after 5 iterations $ ./tests/migration/guestperf.py \ --post-copy --post-copy-iters 5 > result.json Once a result.json file is created, a graph of the data can be generated, showing guest workload performance per thread and the migration iteration points: $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu result.json To further include host vCPU utilization and overall QEMU utilization $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu \ --qemu-cpu --vcpu-cpu result.json NB, the 'guestperf-plot.py' command requires that you have the plotly python library installed. eg you must do $ pip install --user plotly Viewing the result.html file requires that you have the plotly.min.js file in the same directory as the HTML output. This js file is installed as part of the plotly python library, so can be found in $HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js The guestperf-plot.py program can accept multiple json files to plot, enabling results from different configurations to be compared. Finally, to run the entire standardized set of comparisons $ ./tests/migration/guestperf-batch.py \ --dst-host somehost \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 --output tcp-somehost-4gb-2cpu will store JSON files from all scenarios in the directory named tcp-somehost-4gb-2cpu Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 03:20:45 +0000