aboutsummaryrefslogtreecommitdiff
path: root/tests/migration-test.c
AgeCommit message (Collapse)Author
2018-10-11tests/migration: Enable the migration test on s390x, tooThomas Huth
We can re-use the s390-ccw bios code to implement a small firmware for a s390x guest which prints out the "A" and "B" characters and modifies the memory, as required for the migration test. [quintela: Converted the compile script to Makefile rules] Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixed up Makefile since the aarch patch sneaked in first
2018-10-11tests: Add migration test for aarch64Wei Huang
This patch adds migration test support for aarch64. The test code, which implements the same functionality as x86, is booted as a kernel in qemu. Here are the design choices we make for aarch64: * We choose this -kernel approach because aarch64 QEMU doesn't provide a built-in fw like x86 does. So instead of relying on a boot loader, we use -kernel approach for aarch64. * The serial output is sent to PL011 directly. * The physical memory base for mach-virt machine is 0x40000000. We change the start_address and end_address for aarch64. In addition to providing the binary, this patch also includes the source code and the build script in tests/migration/aarch64. So users can change the source and/or re-compile the binary as they wish. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-26tests/migration: Speed up the test on ppc64Thomas Huth
The SLOF boot process is always quite slow ... but we can speed it up a little bit by specifying "-nodefaults" and by using the "nvramrc" variable instead of "boot-command" (since "nvramrc" is evaluated earlier in the SLOF boot process than "boot-command"). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1537204330-16076-1-git-send-email-thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-26tests/migration: Add migration-test header fileWei Huang
This patch moves the settings related migration-test from the migration-test.c file to a new header file. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-26tests/migration: Support cross compilation in generating boot header fileWei Huang
Recently a new configure option, CROSS_CC_GUEST, was added to $(TARGET)-softmmu/config-target.mak to support TCG-related tests. This patch tries to leverage this option to support cross compilation when the migration boot block file is being re-generated: * The x86 related files are moved to a new sub-dir (named ./i386). * A new top-layer Makefile is created in tests/migration/ directory. This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX. The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Wei Huang <wei@redhat.com> Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-08-23tests/migration-test: Silence the kvm_hv message by defaultThomas Huth
When running "make check" on a non-POWER host, the output is quite distorted like this: [...] GTESTER check-qtest-nios2 GTESTER check-qtest-or1k GTESTER check-qtest-ppc64 Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available GTESTER check-qtest-ppcemb GTESTER check-qtest-ppc GTESTER check-qtest-riscv32 GTESTER check-qtest-riscv64 [...] Move the check to the beginning of the main function instead, so that we do not have to test the condition again and again for each test, and better use g_test_message() instead of g_print() here, like it is also done in ufd_version_check() already. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1534419358-10932-2-git-send-email-thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-16migration-test: Clean up string interpolation into QMP, part 3Markus Armbruster
Leaving interpolation into JSON to qmp() is more robust than building QMP input manually, as explained in the recent commit "tests: Clean up string interpolation into QMP input (simple cases)". migration-test.c interpolates strings into JSON in a few places: * migrate_set_parameter() interpolates string parameter @value as a JSON number. Change it to long long. This requires changing migrate_check_parameter() similarly. * migrate_set_capability() interpolates string parameter @value as a JSON boolean. Change it to bool. * deprecated_set_speed() interpolates string parameter @value as a JSON number. Change it to long long. Bonus: gets rid of non-literal format strings. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-21-armbru@redhat.com>
2018-08-16migration-test: Clean up string interpolation into QMP, part 2Markus Armbruster
Leaving interpolation into JSON to qmp() is more robust than building QMP input manually, as explained in the recent commit "tests: Clean up string interpolation into QMP input (simple cases)". migrate() interpolates members into a JSON object. Change it to take its extra QMP arguments as arguments for qdict_from_jsonf_nofail() instead of a string containing JSON members. Bonus: gets rid of a non-literal format string. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-20-armbru@redhat.com>
2018-08-16migration-test: Clean up string interpolation into QMP, part 1Markus Armbruster
Leaving interpolation into JSON to qmp() is more robust than building QMP input manually, as explained in the recent commit "tests: Clean up string interpolation into QMP input (simple cases)". migrate_recover() builds QMP input manually because wait_command() can't interpolate. Well, it can since the previous commit. Simplify accordingly. Bonus: gets rid of a non-literal format string. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-19-armbru@redhat.com>
2018-08-16migration-test: Make wait_command() cope with '%'Markus Armbruster
wait_command() passes its argument @command to qtest_qmp_send(). Falls apart if @command contain '%'. Two ways to disarm this trap: suppress interpretation of '%' by passing @command as argument to format string "%s", or fix it by having wait_command() take the variable arguments to go with @command. Do the latter. This is another step towards compile-time format string checking without triggering -Wformat-nonliteral. Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-18-armbru@redhat.com>
2018-08-16tests: New helper qtest_qmp_receive_success()Markus Armbruster
Commit b21373d0713 copied wait_command() from tests/migration-test.c to tests/tpm-util.c. Replace both copies by new libqtest helper qtest_qmp_receive_success(). Also use it to simplify qtest_qmp_device_del(). Bonus: gets rid of a non-literal format string. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Cc: Thomas Huth <thuth@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-17-armbru@redhat.com>
2018-08-16migration-test: Make wait_command() return the "return" memberMarkus Armbruster
All callers of wait_command() are only interested in the success response's "return" member. Lift its extraction into wait_command(). Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-16-armbru@redhat.com>
2018-08-16tests: Clean up string interpolation into QMP input (simple cases)Markus Armbruster
When you build QMP input manually like this cmd = g_strdup_printf("{ 'execute': 'migrate'," "'arguments': { 'uri': '%s' } }", uri); rsp = qmp(cmd); g_free(cmd); you're responsible for escaping the interpolated values for JSON. Not done here, and therefore works only for sufficiently nice @uri. For instance, if @uri contained a single "'", qobject_from_vjsonf_nofail() would abort. A sufficiently nasty @uri could even inject unwanted members into the arguments object. Leaving interpolation into JSON to qmp() is more robust: rsp = qmp("{ 'execute': 'migrate', 'arguments': { 'uri': %s } }", uri); It's also more concise. Clean up the simple cases where we interpolate exactly a JSON value. Bonus: gets rid of non-literal format strings. A step towards compile-time format string checking without triggering -Wformat-nonliteral. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-13-armbru@redhat.com>
2018-08-16libqtest: Remove qtest_qmp_discard_response() & friendsMarkus Armbruster
qtest_qmp_discard_response(...) is shorthand for qobject_unref(qtest_qmp(...), except it's not actually shorter. Moreover, the presence of these functions encourage sloppy testing. Remove them from libqtest. Add them as macros to the tests that use them, with a TODO comment asking for cleanup. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180806065344.7103-5-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-07-24tests: only update last_byte when at the edgePeter Xu
The only possible change of last_byte is when it reaches the edge. Setting it every time might let last_byte contain an invalid data when memory corruption is detected, then the check of the next byte will be incorrect. For example, a single page corruption at address 0x14ad000 will also lead to a "fake" corruption at 0x14ae000: Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0 Memory content inconsistency at 14ae000 first_byte = 44 last_byte = ef current = 44 hit_edge = 0 After the patch, it'll only report the corrputed page: Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0 Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180723123305.24792-4-peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: hide stderr for postcopy recovery testPeter Xu
We dumped something when network failure happens. We should avoid those messages to be dumped when running the tests: $ ./tests/migration-test -p /x86_64/migration/postcopy/recovery /x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5 qemu-system-x86_64: Detected IO failure for postcopy. Migration paused. qemu-system-x86_64: Detected IO failure for postcopy. Migration paused. OK After the patch: $ ./tests/migration-test -p /x86_64/migration/postcopy/recovery /x86_64/migration/postcopy/recovery: OK Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-11-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: add postcopy recovery testPeter Xu
Test the postcopy recovery procedure by emulating a network failure using migrate-pause command. Tested-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-10-peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: introduce wait_for_migration_status()Peter Xu
It's generalized from wait_for_migration_complete() to allow us to wait for any migration status besides failure. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-9-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: introduce migrate_query*() helpersPeter Xu
Introduce helpers to query migration states and use it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-8-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: allow migrate() to take extra flagsPeter Xu
For example, we can pass in '"resume": true' to resume a migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-7-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-07-10tests: introduce migrate_postcopy_* helpersPeter Xu
Separate the old postcopy UNIX socket test into three steps, provide a helper for each step. With these helpers, we can do more compliated tests like postcopy recovery, while keep the codes shared. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180710091902.28780-6-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fix up merge with 2e295789 / Skip tests for ppc tcg
2018-07-06tests/migration: Skip tests for ppc tcgDr. David Alan Gilbert
PPC tcg seems to be failing migration tests quite regularly; we believe this is TCG bugs in dirty bit updating; it's not clear why PPC fails more but lets skip for the moment. $ ./tests/migration-test /ppc64/migration/deprecated: OK /ppc64/migration/bad_dest: Skipping test: kvm_hv not available OK /ppc64/migration/postcopy/unix: Skipping test: kvm_hv not available OK /ppc64/migration/precopy/unix: Skipping test: kvm_hv not available OK Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Message-id: 20180706143105.93472-1-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-15tests: Migration ppc now inlines its programJuan Quintela
No need to write it to a file. Just need a proper firmware O:-) Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-05-15tests: Add migration precopy testJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-05-04qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREFMarc-André Lureau
Now that we can safely call QOBJECT() on QObject * as well as its subtypes, we can have macros qobject_ref() / qobject_unref() that work everywhere instead of having to use QINCREF() / QDECREF() for QObject and qobject_incref() / qobject_decref() for its subtypes. The replacement is mechanical, except I broke a long line, and added a cast in monitor_qmp_cleanup_req_queue_locked(). Unlike qobject_decref(), qobject_unref() doesn't accept void *. Note that the new macros evaluate their argument exactly once, thus no need to shout them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Rebased, semantic conflict resolved, commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-04-25migration: add blocktime calculation into migration-testAlexey Perevalov
This patch just requests blocktime calculation, and check it in case when UFFD_FEATURE_THREAD_ID feature is set on the host. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <1521742647-25550-6-git-send-email-a.perevalov@samsung.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-09tests: Silence migration-test 'bad' testDr. David Alan Gilbert
In 2c9bb29703c I added a migration test that purposely fails; unfortunately it prints a copy of the failure message to stderr which makes the output a bit messy. Hide stderr for that test. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180306173042.24572-1-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14tests/migration: Add test for migration to bad destinationDr. David Alan Gilbert
Check the source survives. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180212160340.15333-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2018-02-14tests/migration: Add source to PC boot blockDr. David Alan Gilbert
The boot block used in the migration test is currently only shipped as a hex (with the source in the git commit message of ea0c6d62), change this to actually include the source. A script is added to rebuild the header but the expectation is that the generated hex is shipped as well as the .s, so that there's no requirement to have just the right assembler etc. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180213100606.5379-1-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Removed blank line at end of script
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-06tests: Adjust sleeps for migration testJuan Quintela
Also reorder code to not sleep when event already happened. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06tests: Create migrate-start-postcopy commandJuan Quintela
This way, it is like the rest of commands Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06tests: Add deprecated commands migration testJuan Quintela
We add deprecated commands on a new test, so we don't have to add it on normal tests. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06tests: Use consistent names for migrationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06tests: Consolidate accelerators declarationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-06tests: Remove deprecated migration tests commandsJuan Quintela
We move to use migration_set_parameter() for everything. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-23migration: Revert postcopy-blocktime commit setPeter Maydell
This reverts commits ca6011c migration: add postcopy total blocktime into query-migrate 5f32dc8 migration: add blocktime calculation into migration-test 2f7dae9 migration: postcopy_blocktime documentation 3be98be migration: calculate vCPU blocktime on dst side 01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState 31bf06a migration: introduce postcopy-blocktime capability as they don't build on ppc32 due to trying to do atomic accesses on types that are larger than the host pointer type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-15migration: add blocktime calculation into migration-testAlexey Perevalov
This patch just requests blocktime calculation, and check it in case when UFFD_FEATURE_THREAD_ID feature is set on the host. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15migration: free result stringJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reported-by: Peter Xu <peterx@redhat.com>
2017-10-29tests: check that migration parameters are really assignedJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29tests: Don't abuse global_qtestJuan Quintela
As we have two guests running, just pass always who we want to send a message to. Once there, refactor return_or_event() into wait_command. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29tests: Factorize out migrate_test_start/endJuan Quintela
We fix global_test users left and right Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29tests: Refactor setting of parameters/capabilitiesJuan Quintela
So we can use them in future tests Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29tests: rename postcopy-test to migration-testJuan Quintela
Instead of repeating the code, we are going to bo more tests on this file Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 11:17:24 +0000