aboutsummaryrefslogtreecommitdiff
path: root/tests/libqtest.h
AgeCommit message (Collapse)Author
2015-10-24qtest: add qtest_add_abrt_handler()Marc-André Lureau
Allow a test to add abort handlers, use GHook for all handlers. There is currently no way to remove a handler, but it could be later added if needed. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-19qtest: add a few fd-level qmp helpersMarc-André Lureau
Add a few functions to interact with qmp via a simple fd. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-09libqtest: New hmp() & friendsMarkus Armbruster
New convenience function hmp() to facilitate use of human-monitor-command in tests. Use it to simplify its existing uses. To blend into existing libqtest code, also add qtest_hmpv() and qtest_hmp(). That, and the egregiously verbose GTK-Doc comment format make this patch look bigger than it is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
2015-05-22qtest: Add base64 encoded read/writeJohn Snow
For larger pieces of data that won't need to be debugged and viewing the hex nibbles is unlikely to be useful, we can encode data using base64 instead of encoding each byte as %02x, which leads to some space savings and faster reads/writes. For now, the default is left as hex nibbles in memwrite() and memread(). For the purposes of making qtest io easier to read and debug, some callers may want to specify using the old encoding format for small patches of data where the savings from base64 wouldn't be that profound. memwrite/memread use a data encoding that takes 2x the size of the original buffer, but base64 uses "only" (4/3)x, so for larger buffers we can save a decent amount of time and space. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-3-git-send-email-jsnow@redhat.com
2015-04-28libqtest: add qmp_asyncJohn Snow
Add qmp_async, which lets us send QMP commands asynchronously. This is useful when we want to send commands that will trigger event responses, but we don't know in what order to expect them. Sometimes the event responses may arrive even before the command confirmation will show up, so it is convenient to leave the responses in the stream. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-5-git-send-email-jsnow@redhat.com
2015-04-28libqtest: add qmp_eventwaitJohn Snow
Allow the user to poll until a desired interrupt occurs. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com
2015-03-30qtest: Add qtest_add() wrapper macroAndreas Färber
It extends g_test_add() macro with the architecture path. Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-30qtest: Add qtest_add_data_func() wrapper functionAndreas Färber
It calls g_test_add_data_func() with a path supplemented by the architecture, like qtest_add_func() does. Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15glib: add compatibility interface for g_get_monotonic_time()Stefan Hajnoczi
This patch fixes compilation errors when building against glib <2.28.0 due to the missing g_get_monotonic_time() function. The compilation error in tests/libqos/virtio.c was introduced in commit 70556264a89a268efba1d7e8e341adcdd7881eb4 ("libqos: use microseconds instead of iterations for virtio timeout"). Add a simple g_get_monotonic_time() implementation to glib-compat.h based on code from vhost-user-test.c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> [Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h] Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08tests: Add virtio device initializationMarc Marí
Add functions to read and write virtio header fields. Add status bit setting in virtio-blk-device. Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15qtest: Adding qtest_memset and qmemset.John Snow
Currently, libqtest allows for memread and memwrite, but does not offer a simple way to zero out regions of memory. This patch adds a simple function to do so. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-31qtest: Factor out qtest_qmp_receive()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-31Revert "qtest: Fix crash if SIGABRT during qtest_init()"Stefan Hajnoczi
It turns out there are test cases that use multiple libqtest instances. We cannot use a global qtest instance in the SIGABRT handler. This reverts commit cb201b4872f16dfbce63f8648b2584631e2e965f. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13qtest: Fix crash if SIGABRT during qtest_init()Stefan Hajnoczi
If an assertion fails during qtest_init() the SIGABRT handler is invoked. This is the correct behavior since we need to kill the QEMU process to avoid leaking it when the test dies. The global_qtest pointer used by the SIGABRT handler is currently only assigned after qtest_init() returns. This results in a segfault if an assertion failure occurs during qtest_init(). Move global_qtest assignment inside qtest_init(). Not pretty but let's face it - the signal handler depends on global state. Reported-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13libqtest: Avoid inline varargs functionsPeter Maydell
Older versions of gcc (eg 4.6) can't handle varargs functions declared inline for anything other than completely trivial uses, and complain: tests/qom-test.c: In function 'qmp': tests/libqtest.h:359:60: sorry, unimplemented: function 'qmp' can never be inlined because it uses variable argument lists Avoid this problem by putting the functions into libqtest.c instead of using inline definitions in libqtest.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-11-07libqtest: add qmp(fmt, ...) -> QDict* functionStefan Hajnoczi
Add a qtest qmp() function that returns the response object. This allows test cases to verify the result or to check for error responses. It also allows waiting for QMP events. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-11-07libqtest: rename qmp() to qmp_discard_response()Stefan Hajnoczi
Existing qmp() callers do not expect a response object. In order to implement real QMP test cases it will be necessary to inspect the response object. Rename qmp() to qmp_discard_response(). Later patches will introduce a qmp() function that returns the response object and tests that use it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18libqtest: New qtest_end() to go with qtest_start()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1371711329-9144-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18qtest: Add MMIO supportAndreas Färber
Introduce [qtest_]{read,write}[bwlq]() libqtest functions and corresponding QTest protocol commands to replace local versions in libi2c-omap.c. Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b(). Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18libqtest: Introduce qtest_qmpv() and convert remaining macroAndreas Färber
In order to convert qmp() macro to an inline function, expose a qtest_qmpv() function, reused by qtest_qmp(). We can't apply GCC_FMT_ATTR() since fdc-test is using zero-length format strings, which would result in warnings treated as errors. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1361051043-27944-3-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-18libqtest: Convert macros to functions and clean up documentationAndreas Färber
libqtest.h provides a number of shortcut macros to avoid tests feeding it the QTestState they operate on. Most of these can easily be turned into static inline functions, so let's do that for clarity. This avoids getting off-by-one error messages when passing wrong args. Some macros had a val argument but documented @value argument. Fix this. While touching things, enforce gtk-doc markup for return values and for referencing types. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1361051043-27944-2-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-11libqtest: Fix documentation copy&paste errorsAndreas Färber
The [qtest_]in[bwl]() functions/macros don't have a value argument. Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1360604139-16797-1-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-10qtest: Add function to send QMP commandsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-03-30qtest: add C version of test infrastructureAnthony Liguori
This also includes a qtest wrapper script to make it easier to launch qtest tests directly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 23:51:09 +0000