aboutsummaryrefslogtreecommitdiff
path: root/tests/ide-test.c
AgeCommit message (Collapse)Author
2017-03-01tests: fix ide-test leaksMarc-André Lureau
Spotted by ASAN. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2017-02-28ide: remove undefined behavior in ide-testJohn Snow
trivial: initialize the dirty buffer with a random-ish byte. Stops valgrind from whining about uninitialized buffers. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-31tests: Remove unneeded "-vnc none" optionEduardo Habkost
Some tests use the "-vnc none" option without any clear reason, making those tests break when --disable-vnc is specified on ./configure. Remove the unnecessary option. Reviewed-by: John Snow <jsnow@redhat.com> Tested-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-28libqos: Change PCI accessors to take opaque BAR handleDavid Gibson
The usual use model for the libqos PCI functions is to map a specific PCI BAR using qpci_iomap() then pass the returned token into IO accessor functions. This, and the fact that iomap() returns a (void *) which actually contains a PCI space address, kind of suggests that the return value from iomap is supposed to be an opaque token. ..except that the callers expect to be able to add offsets to it. Which also assumes the compiler will support pointer arithmetic on a (void *), and treat it as working with byte offsets. To clarify this situation change iomap() and the IO accessors to take a definitely opaque BAR handle (enforced with a wrapper struct) along with an offset within the BAR. This changes both the functions and all the callers. There were a number of places that checked if iomap() returned non-NULL, and or initialized it to NULL before hand. Since iomap() already assert()s if it fails to map the BAR, these tests were mostly pointless and are removed. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org>
2016-10-28tests: Clean up IO handling in ide-testDavid Gibson
ide-test uses many explicit inb() / outb() operations for its IO, which means it's not portable to non-x86 platforms. This cleans it up to use the libqos PCI accessors instead. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org>
2016-10-06libqos: add PCI management in qtest_vboot()/qtest_shutdown()Laurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-18tests: in IDE and AHCI tests perform DMA write before flushingEvgeny Yakovlev
Due to changes in flush behaviour clean disks stopped generating flush_to_disk events and IDE and AHCI tests that test flush commands started to fail. This change adds additional DMA writes to affected tests before sending flush commands so that bdrv_flush actually generates flush_to_disk event. Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468870792-7411-4-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2016-06-07tests: Remove unnecessary glib.h includesPeter Maydell
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29ide: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2015-12-04tests: Use proper functions types instead of void (*fn)Markus Armbruster
We have several function parameters declared as void (*fn). This is just a stupid way to write void *, and the only purpose writing it like that could serve is obscuring the sin of bypassing the type system without need. The original sin is commit 49ee359: its qtest_add_func() is a wrapper for g_test_add_func(). Fix the parameter type to match g_test_add_func()'s. This uncovers type errors in ide-test.c; fix them. Commit 7949c0e faithfully repeated the sin for qtest_add_data_func(). Fix it the same way, along with a harmless type error uncovered in vhost-user-test.c. Commit 063c23d repeated it for qtest_add_abrt_handler(). The screwy parameter gets assigned to GHook member func, so change its type to match. Requires wrapping kill_qemu() to keep the type checker happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib] Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-11-25ide-test: fix timeoutsJohn Snow
Use explicit timeouts instead of trying to approximate it by counting the cumulative duration of nsleep calls. In practice, the timeout if inb() dwarfed the nsleep delays, and as a result the real timeout value became a lot larger than 5 seconds. So: change the semantics from "Not sooner than 5 seconds" to "no more than 5 seconds" to ensure we don't hang the tester for very long. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1448393771-15483-2-git-send-email-jsnow@redhat.com
2015-11-24ide-test: cdrom_pio_impl fixupJohn Snow
Final tidying: move the interrupt wait into the loop, document that the status read clears the IRQ, and move the final interrupt check outside of the loop. This should be functionally equivalent to how it works currently, but a little less ambiguous and slightly more explicit about the state transitions. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1448060035-31973-3-git-send-email-jsnow@redhat.com
2015-11-20tests: fix cdrom_pio_impl in ide-testPeter Lieven
The check for the cleared BSY flag has to be performed before each data transfer and not just before the first one. Commit 5f81724d revealed this glitch as the BSY flag was not set in ATAPI PIO transfers before. While at it fix the descriptions and add a comment before the nested for loop that transfers the data. Signed-off-by: Peter Lieven <pl@kamp.de> Message-id: 1448029742-19771-1-git-send-email-pl@kamp.de Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09libqtest: New hmp() & friendsMarkus Armbruster
New convenience function hmp() to facilitate use of human-monitor-command in tests. Use it to simplify its existing uses. To blend into existing libqtest code, also add qtest_hmpv() and qtest_hmp(). That, and the egregiously verbose GTK-Doc comment format make this patch look bigger than it is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
2015-10-05qtest/ide-test: ppc64be correction for ATAPI testsJohn Snow
the 16bit ide data register is LE by definition. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1443461938-30039-1-git-send-email-jsnow@redhat.com
2015-09-18ide-test: add cdrom dma testJohn Snow
Now, test the DMA functionality of the ATAPI drive. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1441926555-19471-5-git-send-email-jsnow@redhat.com
2015-09-18ide-test: add cdrom pio testJohn Snow
Add a simple read test for ATAPI devices, using the PIO mechanism. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1441926555-19471-4-git-send-email-jsnow@redhat.com
2015-07-20qtest/ide: add another short PRDT test flavorStefan Hajnoczi
The existing short PRDT test case does not transfer any data because the first PRD is less than 1 sector. This patch adds another short PRDT test case where the first sector can be read but the PRDT is still smaller than the requested number of sectors. This exercises a different code path in ide_dma_cb(). Cc: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1435770571-9906-1-git-send-email-stefanha@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-04-28libqos: add blkdebug_prepare_scriptJohn Snow
Pull this helper out of ide-test and into libqos, to be shared with ahci-test. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-6-git-send-email-jsnow@redhat.com
2015-04-28libqtest: add qmp_eventwaitJohn Snow
Allow the user to poll until a desired interrupt occurs. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com
2015-03-10qtest/ide: Test flush / retry for ISA and PCIJohn Snow
This patch adds tests for werror and rerror functionality for the PCI and ISA ide buses. Tests for the AHCI device are to be included at a later date after requisite patches have been merged upstream to support needed functionality by the tests. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1424708286-16483-18-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qtests: Specify image format explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-08qtest/ide: Uninitialize PC allocatorJohn Snow
Use the new call to pc_alloc_uninit as a test for the new pathways. The leak checking / assert pathways are not enabled in this patch, leaving this as an option to future test writers. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide: Fix segfault when flushing a device that doesn't existKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15qtest/ide: Fix small memory leakJohn Snow
For libqos debugging purposes, it's nice to be able to assert that tests and associated libraries have no memory leaks. To that end, free up the trivial cmdline leak. The remaining leaks caused by pc_alloc_init are fixed instead by my first-fit pc_alloc implementation already on the qemu-devel mailing list. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15libqos: allow qpci_iomap to return BAR mapping sizeJohn Snow
This patch allows qpci_iomap to return the size of the BAR mapping that it created, to allow driver applications (e.g, ahci-test) to make determinations about the suitability or the mapping size, or in the specific case of AHCI, how many ports are supported by the HBA. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15ide-test: add test for werror=stopPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-22qtest: Fix the bug about disable vnc causes "make check" failKewei Yu
When we disable vnc from "./configure", QEMU can't use the vnc option. So qtest can't use the "vnc -none ", otherwise "make check" fails. If QEMU uses "-display none", "-vnc none" is excrescent, So we just need to drop it. Signed-off-by: Kewei Yu <keweihk@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-07libqtest: rename qmp() to qmp_discard_response()Stefan Hajnoczi
Existing qmp() callers do not expect a response object. In order to implement real QMP test cases it will be necessary to inspect the response object. Rename qmp() to qmp_discard_response(). Later patches will introduce a qmp() function that returns the response object and tests that use it. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2013-10-28ide-test: Check what happens with bus mastering disabledKevin Wolf
The main goal is that qemu doesn't crash. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-18libqtest: New qtest_end() to go with qtest_start()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1371711329-9144-3-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-14ide-test: fix failure for test_flushMichael Roth
bd07684aacfb61668ae2c25b7dd00b64f3d7c7f3 added a test to ensure BSY flag is set when a flush request is in flight. It does this by setting a blkdebug breakpoint on flush_to_os before issuing a CMD_FLUSH_CACHE. It then resumes CMD_FLUSH_CACHE operation and checks that BSY is unset. The actual unsetting of BSY does not occur until ide_flush_cb gets called in a bh, however, so in some cases this check will race with the actual completion. Fix this by polling the ide status register until BSY flag gets unset before we do our final sanity checks. According to f68ec8379e88502b4841a110c070e9b118d3151c this is in line with how a guest would determine whether or not the device is still busy. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-06ide-test: Add FLUSH CACHE test caseKevin Wolf
This checks in particular that BSY is set while the flush request is in flight. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06ide-test: Add enum value for DEVKevin Wolf
Get rid of the magic number. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-15ide-test: Fix endianness problemsKevin Wolf
The test case passes on big endian hosts now (tested on ppc64) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1368622839-7084-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-08qtest/ide-test: Test short and long PRDTsKevin Wolf
This tests the behaviour of the DMA engine when the given PRDT contains physical region descriptors for either more or less bytes than the IDE request is for. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qtest/ide-test: Add simple DMA read/write test caseKevin Wolf
This tests that single sectors can be successfully written and correctly read back. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08qtest: Add IDE test caseKevin Wolf
This adds a simple IDE test case and starts by verifying that IDENTIFY can be successfully used and return the correct serial number, version and the WCE flag is set for cache=writeback. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 05:28:06 +0000