aboutsummaryrefslogtreecommitdiff
path: root/tests/docker
AgeCommit message (Collapse)Author
2023-09-08tests/: spelling fixesMichael Tokarev
with some rewording in tests/qemu-iotests/298 tests/qtest/fuzz/generic_fuzz.c tests/unit/test-throttle.c as suggested by Eric. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com>
2023-08-30tests/docker: cleanup non-verbose outputAlex Bennée
Even with --quiet docker will spam the sha256 to the console. Avoid this by redirecting stdout. While we are at it fix the name we echo which was broken during 0b1a649047 (tests/docker: use direct RUNC call to build containers). Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230829161528.2707696-3-alex.bennee@linaro.org>
2023-08-30gitlab: enable ccache for many build jobsDaniel P. Berrangé
The `ccache` tool can be very effective at reducing compilation times when re-running pipelines with only minor changes each time. For example a fresh 'build-system-fedora' job will typically take 20 minutes on the gitlab.com shared runners. With ccache this is reduced to as little as 6 minutes. Normally meson would auto-detect existance of ccache in $PATH and use it automatically, but the way we wrap meson from configure breaks this, as we're passing in an config file with explicitly set compiler paths. Thus we need to add $CCACHE_WRAPPERSPATH to the front of $PATH. For unknown reasons if doing this in msys though, gcc becomes unable to invoke 'cc1' when run from meson. For msys we thus set CC='ccache gcc' before invoking 'configure' instead. A second problem with msys is that cache misses are incredibly expensive, so enabling ccache massively slows down the build when the cache isn't well populated. This is suspected to be a result of the cost of spawning processes under the msys architecture. To deal with this we set CCACHE_DEPEND=1 which enables ccache's 'depend_only' strategy. This avoids extra spawning of the pre-processor during cache misses, with the downside that is it less likely ccache will find a cache hit after semantically benign compiler flag changes. This is the lesser of two evils, as otherwise we can't use ccache at all under msys and remain inside the job time limit. If people are finding ccache to hurt their pipelines, it can be disabled by setting the 'CCACHE_DISABLE=1' env variable against their gitlab fork CI settings. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230804111054.281802-2-berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230829161528.2707696-2-alex.bennee@linaro.org>
2023-08-28tests/docker: add python3-tomli dependency to containersPaolo Bonzini
Instead of having CI pick tomli from the vendored wheel at configure time, place it in the containers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-28lcitool: bump libvirt-ci submodule and regeneratePaolo Bonzini
This brings in a newer version of the pipewire mapping, so rename it. Python 3.9 and 3.10 do not seem to work in OpenSUSE LEAP 15.5 (weird, because 3.9 persisted from 15.3 to 15.4) so bump the Python runtime version to 3.11. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-28dockerfiles: bump tricore cross compiler container to Debian 11Paolo Bonzini
With the release of version 12 on June 10, 2023, Debian 10 is not supported anymore. Modify the cross compiler container to build on a newer version. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-07-17tests/lcitool: add pipewireMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230506163735.3481387-3-marcandre.lureau@redhat.com>
2023-07-03tests/docker: convert riscv64-cross to lcitoolAlex Bennée
We still need to base this on Debian Sid until riscv64 is promoted to a release architecture (or another distro provides a full cross compile target). We use the new qemu-minimal project description to avoid bringing in all the extra dependencies because every extra package is another chance for sid to fail. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-16-alex.bennee@linaro.org>
2023-07-03tests/lcitool: add an explicit gcc-native packageAlex Bennée
We need a native compiler to build the hexagon codegen tools. In our current images we already have a gcc as a side effect of a broken dependency between gcovr and lcov but this will be fixed when we move to bookworm. See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=987818 for details. Update the packages while we are at it. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-14-alex.bennee@linaro.org>
2023-07-03tests/lcitool: Bump fedora container versionsErik Skultety
Fedora 37 -> 38 Signed-off-by: Erik Skultety <eskultet@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <c9b00e573a7a80fc6ce5c68595382f5c916a9195.1685528076.git.eskultet@redhat.com> [AJB: Dropped alpine (in prev commit), reflow commit msg] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-13-alex.bennee@linaro.org>
2023-07-03tests/lcitool: update to latest versionAlex Bennée
We need this for the riscv64 and gcc-native mappings. As the older alpine release has been dropped from the mappings we also need to bump the version of alpine we use. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-12-alex.bennee@linaro.org>
2023-07-03tests/docker: add test-fuzzAlex Bennée
Running the fuzzer requires some hoop jumping and some problems only show up in containers. This basically replicates the build-oss-fuzz job from our CI so we can run in the same containers we use in CI. Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230630180423.558337-10-alex.bennee@linaro.org>
2023-05-26tests/docker: simplify HOST_ARCH definitionPaolo Bonzini
ARCH is always empty, so just define HOST_ARCH as the result of uname. Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18tests/docker: add python3-venv dependencyJohn Snow
Several debian-based tests need the python3-venv dependency as a consequence of Debian debundling the "ensurepip" module normally included with Python. As mkvenv.py stands as of this commit, Debian requires EITHER: (A) setuptools and pip, or (B) ensurepip mkvenv is a few seconds faster if you have setuptools and pip, so developers should prefer the first requirement. For the purposes of CI, the time-save is a wash; it's only a matter of who is responsible for installing pip and when; the timing is about the same. Arbitrarily, I chose adding ensurepip to the test configuration because it is normally part of the Python stdlib, and always having it allows us a more consistent cross-platform environment. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230511035435.734312-12-jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-16tests/lcitool: Add mtools and xorriso and remove genisoimage as dependenciesAni Sinha
Bios bits avocado tests need mformat (provided by the mtools package) and xorriso tools in order to run within gitlab CI containers. Add those dependencies within the Dockerfiles so that containers can be built with those tools present and bios bits avocado tests can be run there. xorriso package conflicts with genisoimage package on some distributions. Therefore, it is not possible to have both the packages at the same time in the container image uniformly for all distribution flavors. Further, on some distributions like RHEL, both xorriso and genisoimage packages provide /usr/bin/genisoimage and on some other distributions like Fedora, only genisoimage package provides the same utility. Therefore, this change removes the dependency on geninsoimage for building container images altogether keeping only xorriso package. At the same time, cdrom-test.c is updated to use and check for existence of only xorrisofs. Signed-off-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230504154611.85854-3-anisinha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-10tests/docker: bump the xtensa base to debian:11-slimAlex Bennée
Stretch is going out of support so things like security updates will fail. As the toolchain itself is binary it hopefully won't mind the underlying OS being updated. Message-Id: <20230503091244.1450613-3-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Richard Henderson <richard.henderson@linaro.org>
2023-04-20tests: lcitool: Switch to OpenSUSE Leap 15.4Peter Krempa
Since OpenSUSE Leap 15 counts as a single major release of an LTS distribution, lcitool has changed the target name to remove the minor version. Adjust the mappings and refresh script. This also updates the dockerfile to 15.4, since the 15.3 version is EOL now: https://get.opensuse.org/leap/15.3 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <a408b7f241ac59e5944db6ae2360a792305c36e0.1681735482.git.pkrempa@redhat.com> [Adjust for target name change and reword commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-04-20tests: libvirt-ci: Update to commit '2fa24dce8bc'Peter Krempa
Update to commit which has fixes needed for OpenSUSE 15.4 and re-generate output files. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <bd11b5954d3dd1e989699370af2b9e2e0c77194a.1681735482.git.pkrempa@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-04-04Use hexagon toolchain version 16.0.0Marco Liebel
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com> Reviewed-by: Brian Cain <bcain@quicinc.com> Message-Id: <20230329142108.1199509-1-quic_mliebel@quicinc.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230403134920.2132362-8-alex.bennee@linaro.org>
2023-03-22tests/docker: all add DOCKER_BUILDKIT to RUNC environmentAlex Bennée
It seems we also need to pass DOCKER_BUILDKIT as an argument to docker itself to get the full benefit of caching. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Suggested-by: Fabiano Rosas <farosas@suse.de> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>
2023-03-13tests/docker: fix a win32 error due to portabilityMarc-André Lureau
docker.py is run during configure, and produces an error: No module named 'pwd'. Use a more portable and recommended alternative to lookup the user "login name". Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230306122751.2355515-4-marcandre.lureau@redhat.com>
2023-03-01tests/docker: add zstdtools to the imagesAlex Bennée
We need this to be able to run the tuxrun_baseline tests in CI which in turn helps us reduce overhead running other tests. We need to update libvirt-ci and refresh the generated files by running 'make lcitool-refresh' to get the new mapping. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230228190653.1602033-24-alex.bennee@linaro.org>
2023-03-01tests/docker: use direct RUNC call to run test jobsAlex Bennée
If we build them without the script we can certainly run them without it. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230228190653.1602033-22-alex.bennee@linaro.org>
2023-03-01tests/docker: use direct RUNC call to build containersAlex Bennée
We don't really need stuff from docker.py to do the build as we have everything we need with a direct call. We do rely on the dockerfiles being able to tweak the UID/name mapping as the last step. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230228190653.1602033-21-alex.bennee@linaro.org>
2023-03-01tests/docker: add USER stanzas to non-lci imagesAlex Bennée
These are flat but not generated by lcitool so we need to manually update them with the `useradd` stanza. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230228190653.1602033-20-alex.bennee@linaro.org>
2023-03-01tests/lcitool: append user setting stanza to dockerfilesAlex Bennée
For the cross-compilation use-case it is important to add the host user to the dockerfile so we can map them to the docker environment when cross-building files. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230228190653.1602033-19-alex.bennee@linaro.org>
2023-03-01tests/dockerfiles: unify debian-toolchain referencesAlex Bennée
We use the debian release number elsewhere so fix it for consistency along with the broken comment. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230228190653.1602033-15-alex.bennee@linaro.org>
2023-03-01tests/docker: Use binaries for debian-tricore-crossBastian Koppelmann
since binutils is pretty old, it fails our CI repeatedly during the compilation of tricore-binutils. We created a precompiled version using the debian docker image and download it instead of building it ourself. We also updated the package to include a newer version of binutils, gcc, and newlib. The default TriCore ISA version used by tricore-as changed from the old version, so we have to specify it now. If we don't 'test_fadd' fails with 'unknown opcode'. The new assembler also picks a new encoding in ld.h which fails the 'test_ld_h' test. We fix that by using the newest TriCore CPU for QEMU. The old assembler accepted an extra ')' in 'test_imask'. The new one does not, so lets remove it. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230209145812.46730-1-kbastian@mail.uni-paderborn.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230228190653.1602033-12-alex.bennee@linaro.org>
2023-03-01testing: update ubuntu2004 to ubuntu2204Alex Bennée
The 22.04 LTS release has been out for almost a year now so its time to update all the remaining images to the current LTS. We can also drop some hacks we need for older clang TSAN support. We will keep the ubuntu2004 container around for those who wish to test builds on the currently still supported baseline. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230228190653.1602033-9-alex.bennee@linaro.org>
2023-03-01tests: add socat dependency for testsAlex Bennée
We only use it for test-io-channel-command at the moment. Unfortunately bringing socat into CI exposed an existing bug in the test-io-channel-command unit test so we disabled it for MacOS in the previous patch. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230228190653.1602033-3-alex.bennee@linaro.org>
2023-02-27ci, docker: update CentOS and OpenSUSE Python to non-EOL versionsPaolo Bonzini
Python 3.6 is at end-of-life. Update the libvirt-ci module to a version that supports overrides for targets and package mappings; this way, QEMU can use the newer versions provided by CentOS 8 (Python 3.8) and OpenSUSE 15.3 (Python 3.9). Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-02-27lcitool: update submodulePaolo Bonzini
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-02-22python: drop pipenvJohn Snow
The pipenv tool was nice in theory, but in practice it's just too hard to update selectively, and it makes using it a pain. The qemu.qmp repo dropped pipenv support a while back and it's been functioning just fine, so I'm backporting that change here to qemu.git. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 20230210003147.1309376-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2023-02-02Merge tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu ↵Peter Maydell
into staging Testing, docs, semihosting and plugin updates - update playbooks for custom runners - add section timing support to gitlab - upgrade fedora images to 37 - purge perl from the build system and deps - disable unstable tests in CI - improve intro, emulation and semihosting docs - semihosting bug fix and O_BINARY default - add memory-sve test - fix some races in qht - improve plugin handling of memory helpers - optimise plugin hooks - fix some plugin deadlocks - reduce win64-cross build time by dropping some targets # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe # KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7 # y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP # LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD # 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD # gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH # tXcKAIxs/MEntPrWTKTdtdnzotJVKw== # =AtfN # -----END PGP SIGNATURE----- # gpg: Signature made Thu 02 Feb 2023 15:59:52 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu: (36 commits) gitlab: cut even more from cross-win64-system build plugins: Iterate on cb_lists in qemu_plugin_user_exit cpu-exec: assert that plugin_mem_cbs is NULL after execution tcg: exclude non-memory effecting helpers from instrumentation translator: always pair plugin_gen_insn_{start, end} calls plugins: fix optimization in plugin_gen_disable_mem_helpers plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's util/qht: use striped locks under TSAN thread: de-const qemu_spin_destroy util/qht: add missing atomic_set(hashes[i]) cpu: free cpu->tb_jmp_cache with RCU tests/tcg: add memory-sve test for aarch64 semihosting: add O_BINARY flag in host_open for NT compatibility semihosting: Write back semihosting data before completion callback docs: add an introduction to the system docs semihosting: add semihosting section to the docs docs: add a new section to outline emulation support docs: add hotlinks to about preface text MAINTAINERS: Fix the entry for tests/tcg/nios2 gitlab: wrap up test results for custom runners ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-02tests/docker: drop debian-tricore-cross's partial statusAlex Bennée
This image is perfectly capable of building QEMU, and indeed we do that on gitlab. Drop the DOCKER_PARTIAL_IMAGES setting so we can also test the gitlab build locally. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-15-alex.bennee@linaro.org>
2023-02-02tests/docker: Install flex in debian-tricore-crossPhilippe Mathieu-Daudé
When flex is not available, binutils sources default to the 'missing' script, but the current script available is not in the format expected by the 'configure' script: $ ./configure ... /usr/src/binutils/missing: Unknown `--run' option Try `/usr/src/binutils/missing --help' for more information configure: WARNING: `missing' script is too old or missing ... checking for bison... bison -y checking for flex... no checking for lex... no checking for flex... /usr/src/binutils/missing flex $ make ... updating ldgram.h gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -I. -I. -I../bfd -I./../bfd -I./../include -I./../intl -I../intl -w -DLOCALEDIR="\"/usr/local/share/locale\"" -W -Wall -Wstrict-prototypes -Wmissing-prototypes -w -c `test -f 'ldgram.c' || echo './'`ldgram.c `test -f ldlex.l || echo './'`ldlex.l /bin/sh: 1: ldlex.l: not found make[3]: *** [Makefile:662: ldlex.c] Error 127 make[3]: Leaving directory '/usr/src/binutils/ld' make[2]: *** [Makefile:799: all-recursive] Error 1 By pass the 'missing' script use by directly installing 'flex' in the container. Reported-by: Peter Maydell <peter.maydell@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230112155643.7408-1-philmd@linaro.org> Reviewed-by: Bastian-Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-14-alex.bennee@linaro.org>
2023-02-02lcitool: drop texinfo from QEMU project/dependenciesMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230110132700.833690-9-marcandre.lureau@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-13-alex.bennee@linaro.org>
2023-02-02lcitool: drop perl from QEMU project/dependenciesMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110132700.833690-8-marcandre.lureau@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-12-alex.bennee@linaro.org>
2023-02-02Update lcitool and fedora to 37Marc-André Lureau
Fedora 35 is EOL. Update to upstream lcitool, that dropped f35 and added f37. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110132700.833690-7-marcandre.lureau@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-11-alex.bennee@linaro.org>
2023-01-26tests/docker/dockerfiles: Add libfdt to the i386 and to the riscv64 containerThomas Huth
No need to recompile the dtc submodule here again and again, we can use the pre-built binary from the distribution instead. (And this will also help in case we finally get rid of the dtc submodule in QEMU one day) Message-Id: <20230124143824.844040-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-23tests/docker: use prebuilt toolchain for debian-hexagon-crossMukilan Thiyagarajan
The current docker image for cross compiling hexagon guests is manually built since it takes >2 hours to build from source. This patch: 1. Solves the above issue by using the prebuilt clang toolchain hosted on CodeLinaro [1] and maintained by QUIC [2]. 2. The dockerfile is also switched from multi-stage to single stage build to allow the CI docker engine to reuse the layer cache. 3. Re-enables the hexagon-cross-container job to be always run in CI and makes it a non-optional dependency for the build-user-hexagon job. The changes for 1 & 2 together bring down the build time to ~3 minutes in GitLab CI when cache is reused and ~9 minutes when cache cannot be reused. [1]: https://github.com/CodeLinaro/hexagon-builder [2]: https://github.com/quic/toolchain_for_hexagon/releases/ Signed-off-by: Mukilan Thiyagarajan <quic_mthiyaga@quicinc.com> [AJB: also tweak MAINTAINERS, remove QEMU_JOB_ONLY_FORKS and comment] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20221219144354.11659-1-quic_mthiyaga@quicinc.com> Message-Id: <20221221090411.1995037-6-alex.bennee@linaro.org>
2022-11-22tests/docker: allow user to override check targetAlex Bennée
This is useful when trying to bisect a particular failing test behind a docker run. For example: make docker-test-clang@fedora \ TARGET_LIST=arm-softmmu \ TEST_COMMAND="meson test qtest-arm/qos-test" \ J=9 V=1 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221117172532.538149-4-alex.bennee@linaro.org>
2022-10-31tests/docker: Add flex/bison to `debian-hexagon-cross`Anton Johansson
debian-hexagon-cross contains two images, one to build the toolchain used for building the Hexagon tests themselves, and one image to build QEMU and run the tests. This commit adds flex/bison to the final image that builds QEMU so that it can also build idef-parser. Note: This container is not built by the CI and needs to be rebuilt and updated manually. Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20221014223642.147845-1-anjo@rev.ng> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20221027183637.2772968-8-alex.bennee@linaro.org>
2022-10-31tests/docker: Add flex/bison to `debian-all-test`Anton Johansson
Adds flex/bison to the debian-all-test-cross container which was missed in the previous CI patch. These dependencies are required by the idef-parser patchset for target/hexagon. Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20221011173229.57909-1-anjo@rev.ng> Message-Id: <20221027183637.2772968-4-alex.bennee@linaro.org>
2022-10-31tests/docker: update test-mingw to run single buildAlex Bennée
While the test-build test happily run for mingw the test-mingw case runs more of the packaging inline with what our CI does. It however fails if we don't find both compilers and expects to be run on a docker image with both. Remove that distinction and make it work more like the other build test scripts. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20221027183637.2772968-3-alex.bennee@linaro.org>
2022-10-31tests/docker: update fedora-win[32|64]-cross with lcitoolAlex Bennée
Convert another two dockerfiles to lcitool and update. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221028095659.48734-4-philmd@linaro.org>
2022-10-28tests: Add sndio to the FreeBSD CI containers / VMBrad Smith
Add sndio to the FreeBSD CI containers / VM Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <Y1f6dxjvD01DtXyG@humpty.home.comstyle.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-06configure: store container engine in config-host.makPaolo Bonzini
In preparation for removing $(DOCKER_SCRIPT) from the tests/tcg configuration files, have Make use the same container engine that had been probed at configure time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-19-alex.bennee@linaro.org>
2022-10-06tests/docker: move alpine from edge to tagged releaseAlex Bennée
Tracking alpine-edge like debian-sid is a moving target. Usually such rolling releases are marked as "allow_failure: true" in our CI. However as alpine presents a musl based distro and provides useful extra coverage lets track a release branch instead to avoid random breakages. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220929114231.583801-11-alex.bennee@linaro.org>
2022-10-06target/hexagon: manually add flex/bison/glib2 to remaining containersAnton Johansson
Adds our build-time dependencies to containers which build qemu-hexagon, but aren't covered by libvirt-ci. Signed-off-by: Anton Johansson <anjo@rev.ng> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220804115548.13024-11-anjo@rev.ng> Message-Id: <20220929114231.583801-9-alex.bennee@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-26 20:31:38 +0000