| Age | Commit message (Collapse) | Author |
|---|
|
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
|
|
We want to get rid of check-block.sh in the long run, so let's move
the checks for the bash version and sanitizers from check-block.sh
into the meson.build file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-4-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
|
|
Instead of failing the iotests if GNU sed is not available (or skipping
them completely in the check-block.sh script), it would be better to
simply skip the bash-based tests that rely on GNU sed, so that the other
tests could still be run. Thus we now explicitely use "gsed" (either as
direct program or as a wrapper around "sed" if it's the GNU version)
in the spots that rely on the GNU sed behavior. Statements that use the
"-r" parameter of sed have been switched to use "-E" instead, since this
switch is supported by all sed versions on our supported build hosts
(most also support "-r", but macOS' sed only supports "-E"). With all
these changes in place, we then can also remove the sed checks from the
check-block.sh script, so that "make check-block" can now be run on
systems without GNU sed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220216125454.465041-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
These do not depend on --with-default-features, so they become
booleans in meson too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This improves performance of running iotests during "make -jN check".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
BusyBox' sed reports itself as "This is not GNU sed version 4.0"
when being run with the --version parameter. However, the iotests
really need GNU sed, they do not work with the BusyBox version.
So let's make sure that we really have GNU sed and refuse to run
the tests with BusyBox' sed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210119134749.401311-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
cfi-icall is a form of Control-Flow Integrity for indirect function
calls implemented by llvm. It is enabled with a -fsanitize flag.
iotests are currently disabled when -fsanitize options is used, with the
exception of SafeStack.
This patch implements a generic filtering mechanism to allow iotests
with a set of known-to-be-safe -fsanitize option. Then marks SafeStack
and the new options used for cfi-icall safe for iotests
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-4-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
macOS is shipped with a very old version of the bash (3.2), which
is currently not suitable for running the iotests anymore (e.g.
it is missing support for "readarray" which is used in the file
tests/qemu-iotests/common.filter). Add a check to skip the iotests
in this case - if someone still wants to run the iotests on macOS,
they can install a newer version from homebrew, for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200918153514.330705-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The test_stream_parallel test still occasionally fails in the CI.
Thus let's disable it during "make check" for now so that it does
not cause trouble during merge tests. We can enable it again once
the problem has been resolved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200907113824.134788-1-thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
SafeStack is a stack protection technique implemented in llvm. It is
enabled with a -fsanitize flag.
iotests are currently disabled when any -fsanitize option is used,
because such options tend to produce additional warnings and false
positives.
While common -fsanitize options are used to verify the code and not
added in production, SafeStack's main use is in production environments
to protect against stack smashing.
Since SafeStack does not print any warning or false positive, enable
iotests when SafeStack is the only -fsanitize option used.
This is likely going to be a production binary and we want to make sure
it works correctly.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-5-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The sanitizers (especially the address sanitizer from Clang) are
sometimes printing out warnings or false positives - this spoils
the output of the iotests, causing some of the tests to fail.
Thus let's skip the automatic iotests during "make check" when the
user configured QEMU with --enable-sanitizers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823084203.29734-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This would make code better and allow to test specific format.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since check-block.sh, the "check" script has learnt to find the source
path. On the other hand, it expects common.env to be in the build tree
(both changes made in commit 76c7560, "configure: Enable out-of-tree
iotests", 2014-05-24). So, it is wrong to invoke "check" from the source
path like check-block.sh does. Fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450867341-11100-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Runs the full qemu-iotests suite for various image formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
