aboutsummaryrefslogtreecommitdiff
path: root/tests/bios-tables-test.c
AgeCommit message (Collapse)Author
2017-01-10tests: pc: add memory hotplug acpi tables testsIgor Mammedov
This also adds SRAT and DSDT blobs for memory hotplug variant Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-10-14tests/boot-sector: Use mkstemp() to create a unique file nameThomas Huth
The pxe-test is run for three different targets now (x86_64, i386 and ppc64), and the bios-tables-test is run for two targets (x86_64 and i386). But each of the tests is using an invariant name for the disk image with the boot sector code - so if the tests are running in parallel, there is a race condition that they destroy the disk image of a parallel test program. Let's use mkstemp() to create unique temporary files here instead - and since mkstemp() is returning an integer file descriptor instead of a FILE pointer, we also switch the fwrite() and fclose() to write() and close() instead. Reported-by: Sascha Silbe <x-qemu@se-silbe.de> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-10tests: acpi: extend cphp testcase with numa checkIgor Mammedov
so it would be possible to verify _PXM generation in DSDT and SRAT tables. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-10tests/acpi: speedup acpi testsMarcel Apfelbaum
Use kvm acceleration if available. Disable kernel-irqchip and use qemu64 cpu for both kvm and tcg cases. Using kvm acceleration saves about a second and disabling kernel-irqchip has no visible performance impact. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04tests: acpi: add CPU hotplug testcaseIgor Mammedov
Test with: -smp 2,cores=3,sockets=2,maxcpus=6 to capture sparse APIC ID values that default AMD CPU has in above configuration. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24bios: Add tests for the IPMI ACPI and SMBIOS entriesCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07tests: Remove unnecessary glib.h includesPeter Maydell
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07tests: acpi: report names of expected files in verbose modeIgor Mammedov
print expected file name if it doesn't exists if verbose mode is enabled*. It helps to avoid running bios-tables-test under debugger to figure out missing file name. *) verbose mode is enabled if "V" env. variable is set Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-04-07tests/bios-tables-test: fix assertMarcel Apfelbaum
Newer iasl does not add the aml file name to the Definition Block. See acpica tools commit 1ecbb3d5: "Emit the AMLFilename as a zero-length string. Allows the compiler to create the name later -- making it easier to rename the parent ASL (DSL) file." That causes an assert in acpi tests: tests/bios-tables-test.c:455:normalize_asl: assertion failed: (block_name) Fix it by striping the start of the definition block line until the first comma. The block name is always the first parameter and the grammar does not allow comma in between, so it is safe. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, virtio, pci, pxe Fixes all over the place. New tests for pxe. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 18 Feb 2016 15:46:39 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: tests/vhost-user-bridge: add scattering of incoming packets vhost-user interrupt management fixes rules: filter out irrelevant files change type of pci_bridge_initfn() to void dec: convert to realize() tests: add pxe e1000 and virtio-pci tests msix: fix msix_vector_masked virtio: optimize virtio_access_is_big_endian() for little-endian targets vhost: simplify vhost_needs_vring_endian() vhost: move virtio 1.0 check to cross-endian helper virtio: move cross-endian helper to vhost vhost-net: revert support of cross-endian vnet headers virtio-net: use the backend cross-endian capabilities Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-16tests: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com>
2016-02-16tests: add pxe e1000 and virtio-pci testsVictor Kaplansky
The test is based on bios-tables-test.c. It creates a file with the boot sector image and loads it into a guest using PXE and TFTP functionality. Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Victor Kaplansky <victork@redhat.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08tests: acpi: print ASL diff in verbose modeIgor Mammedov
print ASL difference if there is any when executing 'make V=1 check'. Use 'DIFF' environment variable to determine which diff utility to use and if it's not set notify user by printing warning that DIFF is not set if run in verbose mode and there is difference in ASL. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-07smbios: add smbios 3.0 supportWei Huang
This patch adds support for SMBIOS 3.0 entry point. When caller invokes smbios_set_defaults(), it can specify entry point as 2.1 or 3.0. Then smbios_get_tables() will return the entry point table in right format. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1440615870-9518-2-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13smbios: move smbios code into a common folderWei Huang
To share smbios among different architectures, this patch moves SMBIOS code (smbios.c and smbios.h) from x86 specific folders into new hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in x86 default config files. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10bios-tables-test: handle false-positive smbios signature matchesGabriel L. Somlo
It has been reported that sometimes the .rodata section of SeaBIOS, containing the constant string against which the SMBIOS signature ends up being compared, also falls within the guest f-segment. In that case, the test obviously fails, unless we continue searching for the *real* SMBIOS entry point. Rather than stopping at the first match for the SMBIOS signature ("_SM_") in the f-segment (0xF0000-0xFFFFF), continue scanning until either a valid entry point table is found, or the f-segment has been exhausted. Reported-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-27hw/i386: Move ACPI header definitions in an arch-independent locationShannon Zhao
The ACPI related header file acpi-defs.h, includes definitions that apply on other architectures as well. Move it in `include/hw/acpi/` to sanely include it from other architectures. Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com> Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01tests: bios-tables-test: add support for testing bridgesIgor Mammedov
Adds alternative ACPI table blob selection for testing non default QEMU configurations. If blob file for test variant is not present, fallback to default blob. With this change implement testing with a coldplugged bridge. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-27bios-tables-test: split piix4 and q35 testsPaolo Bonzini
This makes it clear which one is failing. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2014-12-10qtests: Specify image format explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-03qtest/bios-tables: Correct Q35 command lineJohn Snow
If the Q35 board types are to begin recognizing and decoding syntactic sugar for drive/device declarations, then workarounds found within the qtests suite need to be adjusted to prevent any test failures after the fix. bios-tables-test improperly uses this cli: -drive file=etc,id=hd -device ide-hd,drive=hd Which will create a drive and device due to the lack of specifying if=none. Then, it will attempt to create a second device and fail. This patch corrects this test to always use the full, non-sugared -device/-drive syntax for both PC and Q35. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1412187569-23452-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-24tests/bios-tables-test: check the value returned by fopen()zhanghailiang
The function fopen() may fail, so check its return value. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Liu <john.liuli@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-29bios-tables-test: fix ASL normalization false positivePaolo Bonzini
My version of IASL (from RHEL7) puts two newlines between the head comment and the DefinitionBlock property. Kill all newlines after the comment, so that normalize_asl works properly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-05-27tests: add smbios testingGabriel L. Somlo
Add tests to find and verify the smbios entry point structure, and to walk and perform checks on the actual smbios tables. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-27tests: rename acpi-test to bios-tables-testGabriel L. Somlo
The test harness for acpi (generating a boot disk, starting qemu, waiting for the BIOS to finish booting before examining guest memory, etc.) is perfectly suited for testing other bios tables beside acpi, such as e.g., smbios. This patch renames acpi-test to bios-tables-test to reflect that, and in preparation for adding smbios tests. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 20:12:04 +0000