aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)Author
2014-06-05Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into stagingPeter Maydell
* remotes/bonzini/softmmu-smap: (33 commits) target-i386: cleanup x86_cpu_get_phys_page_debug target-i386: fix protection bits in the TLB for SMEP target-i386: support long addresses for 4MB pages (PSE-36) target-i386: raise page fault for reserved bits in large pages target-i386: unify reserved bits and NX bit check target-i386: simplify pte/vaddr calculation target-i386: raise page fault for reserved physical address bits target-i386: test reserved PS bit on PML4Es target-i386: set correct error code for reserved bit access target-i386: introduce support for 1 GB pages target-i386: introduce do_check_protect label target-i386: tweak handling of PG_NX_MASK target-i386: commonize checks for PAE and non-PAE target-i386: commonize checks for 4MB and 4KB pages target-i386: commonize checks for 2MB and 4KB pages target-i386: fix coding standards in x86_cpu_handle_mmu_fault target-i386: simplify SMAP handling in MMU_KSMAP_IDX target-i386: fix kernel accesses with SMAP and CPL = 3 target-i386: move check_io helpers to seg_helper.c target-i386: rename KSMAP to KNOSMAP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: move all load/store functions to cpu_ldst.hPaolo Bonzini
Unify pieces of cpu-all.h, exec-all.h, softmmu_exec.h and tcg/tcg.h into a single new header file with all helpers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-04TCG: Fix tcg_gen_extr_i64_tl for 32bitAlexander Graf
We expose a generic helper "tcg_gen_extr_i64_tl" for 64bit targets, but the same function for 32bit targets is a misnomer and refers to an invalid function name. Fix up the definition to point to the correct internal helper names instead. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tci: Convert to new ldst opcodesRichard Henderson
Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg-i386: Fix win64 qemu storeRichard Henderson
The first non-register argument isn't placed at offset 0. Cc: qemu-stable@nongnu.org Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg/optimize: Remember garbage high bits for 32-bit opsRichard Henderson
For a 64-bit host, the high bits of a register after a 32-bit operation are undefined. Adjust the temps mask for all 32-bit ops to reflect that. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg/optimize: Move updating of gen_opc_buf into tcg_opt_gen_mov*Richard Henderson
No functional change, just reduce a bit of redundancy. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-sparc: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-s390: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-arm: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-aarch64: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-i386: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Allow the debug_frame data structure to be constantRichard Henderson
Adjust the FDE to point to the code_buffer after we've copied it to the image, rather than requiring that the backend set it prior. This allows the backend to use read-only storage for its data. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Remove sizemask and flags arguments to tcg_gen_callNRichard Henderson
Take them from the TCGHelperInfo struct instead. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Save flags and computed sizemask in TCGHelperInfoRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Register the helper info struct rather than the nameRichard Henderson
This will let us find all the info from the hash table. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Inline tcg_gen_helperNRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Use helper-gen.h in tcg-op.hRichard Henderson
No need to open-code the setup of the builtin helpers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Push tcg-runtime routines into exec/helper-*Richard Henderson
Rather than special casing them, use the standard mechanisms for tcg helper generation. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Optimize brcond2 and setcond2 ne/eqRichard Henderson
If either the high or low pair can be resolved, we can simplify to either a constant or to a 32-bit comparison. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-27Merge remote-tracking branch 'remotes/rth/tcg-mips' into stagingPeter Maydell
* remotes/rth/tcg-mips: (24 commits) tcg-mips: Enable direct chaining of TBs tcg-mips: Simplify movcond tcg-mips: Simplify brcond2 tcg-mips: Improve setcond eq/ne vs zeros tcg-mips: Simplify setcond2 tcg-mips: Simplify brcond tcg-mips: Simplify setcond tcg-mips: Commonize opcode implementations tcg-mips: Improve add2/sub2 tcg-mips: Hoist args loads tcg-mips: Fix subtract immediate range tcg-mips: Name the opcode enumeration tcg-mips: Use EXT for AND on mips32r2 tcg-mips: Use T9 for TCG_TMP1 tcg-mips: Introduce TCG_TMP0, TCG_TMP1 tcg-mips: Rearrange register allocation tcg-mips: Convert to new_ldst tcg-mips: Convert to new qemu_l/st helpers tcg-mips: Move softmmu slow path out of line tcg-mips: Split large ldst offsets ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-24tcg-mips: Enable direct chaining of TBsRichard Henderson
Now that the code_gen_buffer is constrained to not cross 256mb regions, we are assured that we can use J to reach another TB. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify movcondRichard Henderson
Use the same table to fold comparisons as with setcond. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify brcond2Richard Henderson
Emitting a single branch instead of (up to) 3, using setcond2 to generate the composite compare. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Improve setcond eq/ne vs zerosRichard Henderson
The original code results in one too many insns per zero present in the input. And since comparing 64-bit numbers vs zero is common... Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify setcond2Richard Henderson
Using tcg_unsigned_cond and tcg_high_cond. Also, move the function up in the file for future cleanups. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify brcondRichard Henderson
Use the same table to fold comparisons as with setcond. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify setcondRichard Henderson
Use a table to fold comparisons to less-than. Also, move the function up in the file for futher simplifications. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Commonize opcode implementationsRichard Henderson
Most opcodes fall in to one of a couple of patterns. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Improve add2/sub2Richard Henderson
Reduce insn count from 5 to either 3 or 4. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Hoist args loadsRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Fix subtract immediate rangeRichard Henderson
Since we must use ADDUI, we would generate incorrect code for -32768. Leaving off subtract of +32768 makes things easier for a follow-on patch. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Name the opcode enumerationRichard Henderson
And use it in the opcode emission functions. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use EXT for AND on mips32r2Richard Henderson
At the same time, tidy deposit by introducing tcg_out_opc_bf. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use T9 for TCG_TMP1Richard Henderson
T0 is an argument register for the n32 and n64 abis. T9 is the call address register for the abis, and is more directly under the control of the backend. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Introduce TCG_TMP0, TCG_TMP1Richard Henderson
Use these instead of hard-coding the registers to use for temporaries. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Rearrange register allocationRichard Henderson
Use FP (also known as S8) as a normal call-saved register. Include T0 in the allocation order and call-clobbered list even though it's currently used as a TCG temporary. Put the argument registers at the end of the allocation order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Convert to new_ldstRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Convert to new qemu_l/st helpersRichard Henderson
In addition, fill delay slots calling the helpers and tail call to the store helpers. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Move softmmu slow path out of lineRichard Henderson
At the same time, tidy up the call helpers, avoiding a memory reference. Split out several subroutines. Use TCGMemOp constants. Make endianness selectable at runtime. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Split large ldst offsetsRichard Henderson
Use this to reduce goto_tb by one insn. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Fill the exit_tb delay slotRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use J and JAL opcodesRichard Henderson
For userland builds calls will normally be in range, and for the exit_tb opcode the branch to the epilogue. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-22tci: Fix tcg_out_callRichard Henderson
Broken since dddbb2e1e3f8137d7e3f1faf9758c66cca0c94ea. Do all the rest of the things that tcg_out_op did before and after the big switch statement. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15tcg-s390: Implement direct chaining of TBsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15tcg-s390: Improve setcondRichard Henderson
There are a variety of common cases for which we can use carry tricks to avoid a conditional branch. On very new hardware, use LOAD ON CONDITION instead of a conditional branch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15tcg-s390: Allow immediate operands to add2 and sub2Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-15tcg-s390: Implement tcg_register_jitRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 11:00:14 +0000