| Age | Commit message (Collapse) | Author |
|---|
|
Make sure to not modify the branch target. This ensure that the
branch target is not corrupted during partial retranslation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The usages of this define are pure TCG and there is no architecture
specific variation of the value. Localise it to the TCG engine to
remove another architecture agnostic piece from cpu-defs.h.
This follows on from a28177820a868eafda8fab007561cc19f41941f4 where
temp_buf was moved out of the CPU_COMMON obsoleting the need for
the super early definition.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <498e8e5325c1a1aff79e5bcfc28cb760ef6b214e.1433052532.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The tcg_constant_folding folding ends up doing all the optimizations
(which is a good thing to avoid looping on all ops multiple time), so
make it clear and just rename it tcg_optimize.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-6-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Most of the calls to tcg_opt_gen_mov are preceeded by a test to check if
the source temp is a constant. Fold that into the tcg_opt_gen_mov
function.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433495958-9508-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Each call to tcg_opt_gen_mov is preceeded by a test to check if the
source and destination temps are copies. Fold that into the
tcg_opt_gen_mov function.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-4-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We can get the opcode using the TCGOp pointer. It needs to be
dereferenced, but it's anyway done a few lines below to write
the new value.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-3-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We can get the opcode using the TCGOp pointer. It needs to be
dereferenced, but it's anyway done a few lines below to write
the new value.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447607-31184-2-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
When the same temp is used twice or more as an input argument to a TCG
instruction, the dead computation code doesn't recognize the second use
as a dead temp. This is because the temp is marked as live in the same
loop where dead inputs are checked.
The fix is to split the loop in two parts. This avoid emitting a move
and using a register for the movcond instruction when used as "move if
true" on x86-64. This might bring more improvements on RISC TCG targets
which don't have outputs aliased to inputs.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447228-29425-3-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
For TCG ops with two outputs registers (add2, sub2, div2, div2u), when
the same input temp is used for the two inputs aliased to the two
outputs, and when these inputs are both dead, the register allocation
code wrongly assigned the same register to the same output.
This happens for example with sub2 t1, t2, t3, t3, t4, t5, when t3 is
not used anymore after the TCG op. In that case the same register is
used for t1, t2 and t3.
The fix is to look for already allocated aliased input when allocating
a dead aliased input and check that the register is not already
used.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1433447228-29425-2-git-send-email-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The addition of MO_AMASK means that places that used inverted masks
need to be changed to use positive masks, and places that failed to
mask the intended bits need updating.
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This will be used to size the TLB when more than 8 MMU modes are
used by the target. Limitations come from the limited size of
the immediate fields (which sometimes, as in the case of Aarch64,
extend to instructions that shift the immediate).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
tcg-target.h does not use any QEMU-specific symbols, save for tci's usage
of CPUArchState. Pull that up to tcg/tcg.h.
This will make it possible to include tcg-target.h in cpu-defs.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
These modifiers control, on a per-memory-op basis, whether
unaligned memory accesses are allowed. The default setting
reflects the target's definition of ALIGNED_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
At the tcg opcode level, not at the tcg-op.h generator level.
This requires minor changes through all of the tcg backends,
but none of the cpu translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This brings down the size of the struct from 56 to 32 bytes on 64-bit,
and to 20 bytes on 32-bit. This leads to memory savings:
Before:
$ find . -name 'tcg.o' | xargs size
text data bss dec hex filename
41131 29800 88 71019 1156b ./aarch64-softmmu/tcg/tcg.o
37969 29416 96 67481 10799 ./x86_64-linux-user/tcg/tcg.o
39354 28816 96 68266 10aaa ./arm-linux-user/tcg/tcg.o
40802 29096 88 69986 11162 ./arm-softmmu/tcg/tcg.o
39417 29672 88 69177 10e39 ./x86_64-softmmu/tcg/tcg.o
After:
$ find . -name 'tcg.o' | xargs size
text data bss dec hex filename
40883 29800 88 70771 11473 ./aarch64-softmmu/tcg/tcg.o
37473 29416 96 66985 105a9 ./x86_64-linux-user/tcg/tcg.o
38858 28816 96 67770 108ba ./arm-linux-user/tcg/tcg.o
40554 29096 88 69738 1106a ./arm-softmmu/tcg/tcg.o
39169 29672 88 68929 10d41 ./x86_64-softmmu/tcg/tcg.o
Note that using an entire byte for some enums that need less than
that wastes a few bits (noticeable in 32 bits, where we use
20 bytes instead of 16) but avoids extraction code, which overall
is a win--I've tested several variations of the patch, and the appended
is the best performer for OpenSSL's bntest by a very small margin:
Before:
$ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null
[...]
Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs):
10538.479833 task-clock (msec) # 0.999 CPUs utilized ( +- 0.38% )
772 context-switches # 0.073 K/sec ( +- 2.03% )
0 cpu-migrations # 0.000 K/sec ( +-100.00% )
2,207 page-faults # 0.209 K/sec ( +- 0.08% )
10.552871687 seconds time elapsed ( +- 0.39% )
After:
$ taskset -c 0 perf stat -r 15 -- x86_64-linux-user/qemu-x86_64 img/bntest-x86_64 >/dev/null
Performance counter stats for 'x86_64-linux-user/qemu-x86_64 img/bntest-x86_64' (15 runs):
10459.968847 task-clock (msec) # 0.999 CPUs utilized ( +- 0.30% )
739 context-switches # 0.071 K/sec ( +- 1.71% )
0 cpu-migrations # 0.000 K/sec ( +- 68.14% )
2,204 page-faults # 0.211 K/sec ( +- 0.10% )
10.473900411 seconds time elapsed ( +- 0.30% )
Suggested-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
No code uses the cpu_pc_from_tb() function. Delete from tricore and
arm which each provide an unused implementation. Update the comment
in tcg.h to reflect that this is obsoleted by synchronize_from_tb.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Commit 951c6300f7 out-of-lined the 32-bit-host versions of
tcg_gen_{ld,st}_i64, but in the process it inadvertently changed
an #ifdef HOST_WORDS_BIGENDIAN to #ifdef TCG_TARGET_WORDS_BIGENDIAN.
Since the latter doesn't get defined anywhere this meant we always
took the "LE host" codepath, and stored the two halves of the value
in the wrong order on BE hosts. This typically breaks any 64-bit
guest on a 32-bit BE host completely, and will have possibly more
subtle effects even for 32-bit guests.
Switch the ifdef back to HOST_WORDS_BIGENDIAN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1428523029-13620-1-git-send-email-peter.maydell@linaro.org
|
|
As seen with ubuntu-5.10-live-powerpc.iso.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Missing from movcond, and brcondi_i32 (but not brcondi_i64).
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Pre-allocating 512 of them per TB is a waste.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This is less about improved type checking than enabling a
subsequent change to the representation of labels.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Pre-allocating 640 of them per TB is a waste.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We no longer need INDEX_op_end to terminate the list, nor do we
need 5 forms of nop, since we just remove the TCGOp instead.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Rather reserving space in the op stream for optimization,
let the optimizer add ops as necessary.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
With the linked list scheme we need not leave nops in the stream
that we need to process later.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The previous setup required ops and args to be completely sequential,
and was error prone when it came to both iteration and optimization.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Almost completely eliminates the ifdefs in this file, improving
confidence in the lesser used 32-bit builds.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Some of these functions are really quite large. We have a number of
things that ought to be circularly dependent, but we duplicated code
to break that chain for the inlines.
This saved 25% of the code size of one of the translators I examined.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Currently 'info jit' outputs half of the information to monitor and the
rest to qemu log. Dumping opcode counts to monitor as a part of 'info
jit' command doesn't sound useful. Add new monitor command 'info
opcount' that only dumps opcode counters.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Instead of using structures, which imply some amount of overhead
on certain ABIs, use pointer types.
This actually reduces the size of the binaries vs a NON-debug
build on ppc64 and x86_64, due to a reduction in the number of
sign-extension insns.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The "old" qemu_ld opcode did not specify the size of the result,
and so we had to assume full register width. With the new opcodes,
we can narrow the result.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The pre-v9 ADDX/SUBX insns were renamed ADDC/SUBC for v9.
Standardizing on the v9 name makes things less confusing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Similar to the ADDC tricks we use in setcond_i32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We failed to swap c1 and c2 correctly for NE c2 == 0.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
On T4 and newer Sparc chips we have an add-with-carry insn
that takes its input from %xcc instead of %icc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
fopen() may fail and it does not check its return vaule here,
it is better to dump op count to the normal log file.
Signed-off-by: Li Liu <john.liuli@huawei.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Add back in the support for 64-bit PPC MacOSX hosts that was
broken in the recent merge of the 32-bit and 64-bit TCG backends.
Reported-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Andreas Färber <andreas.faerber@web.de>
|
|
With rt != r0 on loads, we use rt for scratch. If we need an index
register different from base, we can't use rt, but r0 is usable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1403843160-30332-1-git-send-email-rth@twiddle.net
Tested-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The tcg_out* and tcg_patch* functions are utility routines that may or
may not be used by a particular backend; mark them with the 'unused'
attribute to suppress spurious warnings if they aren't used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
* accomodate -> accommodate
* aquiring -> acquiring
* beacuse -> because
* loosing -> losing
* prefering -> preferring
* threshhold -> threshold
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This can significantly reduce code size for generation of (some)
64-bit constants. With the side effect that we know for a fact
that exit_tb can use the register to good effect.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
