aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)Author
2018-06-15tcg: Reduce max TB opcode countRichard Henderson
Also, assert that we don't overflow any of two different offsets into the TB. Both unwind and goto_tb both record a uint16_t for later use. This fixes an arm-softmmu test case utilizing NEON in which there is a TB generated that runs to 7800 opcodes, and compiles to 96k on an x86_64 host. This overflows the 16-bit offset in which we record the goto_tb reset offset. Because of that overflow, we install a jump destination that goes to neverland. Boom. With this reduced op count, the same TB compiles to about 48k for aarch64, ppc64le, and x86_64 hosts, and neither assertion fires. Cc: qemu-stable@nongnu.org Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: remove tb_lockEmilio G. Cota
Use mmap_lock in user-mode to protect TCG state and the page descriptors. In !user-mode, each vCPU has its own TCG state, so no locks needed. Per-page locks are used to protect the page descriptors. Per-TB locks are used in both modes to protect TB jumps. Some notes: - tb_lock is removed from notdirty_mem_write by passing a locked page_collection to tb_invalidate_phys_page_fast. - tcg_tb_lookup/remove/insert/etc have their own internal lock(s), so there is no need to further serialize access to them. - do_tb_flush is run in a safe async context, meaning no other vCPU threads are running. Therefore acquiring mmap_lock there is just to please tools such as thread sanitizer. - Not visible in the diff, but tb_invalidate_phys_page already has an assert_memory_lock. - cpu_io_recompile is !user-only, so no mmap_lock there. - Added mmap_unlock()'s before all siglongjmp's that could be called in user-mode while mmap_lock is held. + Added an assert for !have_mmap_lock() after returning from the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic. Performance numbers before/after: Host: AMD Opteron(tm) Processor 6376 ubuntu 17.04 ppc64 bootup+shutdown time 700 +-+--+----+------+------------+-----------+------------*--+-+ | + + + + + *B | | before ***B*** ** * | |tb lock removal ###D### *** | 600 +-+ *** +-+ | ** # | | *B* #D | | *** * ## | 500 +-+ *** ### +-+ | * *** ### | | *B* # ## | | ** * #D# | 400 +-+ ** ## +-+ | ** ### | | ** ## | | ** # ## | 300 +-+ * B* #D# +-+ | B *** ### | | * ** #### | | * *** ### | 200 +-+ B *B #D# +-+ | #B* * ## # | | #* ## | | + D##D# + + + + | 100 +-+--+----+------+------------+-----------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/HwmBHXe debian jessie aarch64 bootup+shutdown time 90 +-+--+-----+-----+------------+------------+------------+--+-+ | + + + + + + | | before ***B*** B | 80 +tb lock removal ###D### **D +-+ | **### | | **## | 70 +-+ ** # +-+ | ** ## | | ** # | 60 +-+ *B ## +-+ | ** ## | | *** #D | 50 +-+ *** ## +-+ | * ** ### | | **B* ### | 40 +-+ **** # ## +-+ | **** #D# | | ***B** ### | 30 +-+ B***B** #### +-+ | B * * # ### | | B ###D# | 20 +-+ D ##D## +-+ | D# | | + + + + + + | 10 +-+--+-----+-----+------------+------------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/iGpGFtv The gains are high for 4-8 CPUs. Beyond that point, however, unrelated lock contention significantly hurts scalability. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: move tb_ctx.tb_phys_invalidate_count to tcg_ctxEmilio G. Cota
Thereby making it per-TCGContext. Once we remove tb_lock, this will avoid an atomic increment every time a TB is invalidated. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: track TBs with per-region BST'sEmilio G. Cota
This paves the way for enabling scalable parallel generation of TCG code. Instead of tracking TBs with a single binary search tree (BST), use a BST for each TCG region, protecting it with a lock. This is as scalable as it gets, since each TCG thread operates on a separate region. The core of this change is the introduction of struct tcg_region_tree, which contains a pointer to a GTree and an associated lock to serialize accesses to it. We then allocate an array of tcg_region_tree's, adding the appropriate padding to avoid false sharing based on qemu_dcache_linesize. Given a tc_ptr, we first find the corresponding region_tree. This is done by special-casing the first and last regions first, since they might be of size != region.size; otherwise we just divide the offset by region.stride. I was worried about this division (several dozen cycles of latency), but profiling shows that this is not a fast path. Note that region.stride is not required to be a power of two; it is only required to be a multiple of the host's page size. Note that with this design we can also provide consistent snapshots about all region trees at once; for instance, tcg_tb_foreach acquires/releases all region_tree locks before/after iterating over them. For this reason we now drop tb_lock in dump_exec_info(). As an alternative I considered implementing a concurrent BST, but this can be tricky to get right, offers no consistent snapshots of the BST, and performance and scalability-wise I don't think it could ever beat having separate GTrees, given that our workload is insert-mostly (all concurrent BST designs I've seen focus, understandably, on making lookups fast, which comes at the expense of convoluted, non-wait-free insertions/removals). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg/i386: Use byte form of xgetbv instructionJohn Arbuckle
The assembler in most versions of Mac OS X is pretty old and does not support the xgetbv instruction. To go around this problem, the raw encoding of the instruction is used instead. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Message-Id: <20180604215102.11002-1-programmingkidx@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-20tcg: fix s/compliment/complement/ typosEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180510' into staging target-arm queue: * hw/arm/iotkit.c: fix minor memory leak * softfloat: fix wrong-exception-flags bug for multiply-add corner case * arm: isolate and clean up DTB generation * implement Arm v8.1-Atomics extension * Fix some bugs and missing instructions in the v8.2-FP16 extension # gpg: Signature made Thu 10 May 2018 18:44:34 BST # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits) target/arm: Clear SVE high bits for FMOV target/arm: Fix float16 to/from int16 target/arm: Implement vector shifted FCVT for fp16 target/arm: Implement vector shifted SCVF/UCVF for fp16 target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only target/arm: Implement CAS and CASP target/arm: Fill in disas_ldst_atomic target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode target/riscv: Use new atomic min/max expanders tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add tcg: Introduce atomic helpers for integer min/max target/xtensa: Use new min/max expanders target/arm: Use new min/max expanders tcg: Introduce helpers for integer min/max atomic.h: Work around gcc spurious "unused value" warning make sure that we aren't overwriting mc->get_hotplug_handler by accident arm/boot: split load_dtb() from arm_load_kernel() platform-bus-device: use device plug callback instead of machine_done notifier pc: simplify MachineClass::get_hotplug_handler handling softfloat: Handle default NaN mode after pickNaNMulAdd, not before ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/riscv/translate.c
2018-05-10tcg: Introduce atomic helpers for integer min/maxRichard Henderson
Given that this atomic operation will be used by both risc-v and aarch64, let's not duplicate code across the two targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-10tcg: Introduce helpers for integer min/maxRichard Henderson
These operations are re-invented by several targets so far. Several supported hosts have insns for these, so place the expanders out-of-line for a future introduction of tcg opcodes. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-09tcg: Limit the number of ops in a TBRichard Henderson
In 6001f7729e12 we partially attempt to address the branch displacement overflow caused by 15fa08f845. However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c is a testcase that contains a TB so large as to overflow anyway. The limit here of 8000 ops produces a maximum output TB size of 24112 bytes on a ppc64le host with that test case. This is still much less than the maximum forward branch distance of 32764 bytes. Cc: qemu-stable@nongnu.org Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps") Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09tcg/i386: Fix dup_vec in non-AVX2 codepathPeter Maydell
The VPUNPCKLD* instructions are all "non-destructive source", indicated by "NDS" in the encoding string in the x86 ISA manual. This means that they take two source operands, one of which is encoded in the VEX.vvvv field. We were incorrectly treating them as if they were destructive-source and passing 0 as the 'v' argument of tcg_out_vex_modrm(). This meant we were always using %xmm0 as one of the source operands, causing incorrect results if the register allocator happened to want to use something else. For instance the input AArch64 insn: DUP v26.16b, w21 which becomes TCG IR ops: dup_vec v128,e8,tmp2,x21 st_vec v128,e8,tmp2,env,$0xa40 was assembled to: 0x607c568c: c4 c1 7a 7e 86 e8 00 00 vmovq 0xe8(%r14), %xmm0 0x607c5694: 00 0x607c5695: c5 f9 60 c8 vpunpcklbw %xmm0, %xmm0, %xmm1 0x607c5699: c5 f9 61 c9 vpunpcklwd %xmm1, %xmm0, %xmm1 0x607c569d: c5 f9 70 c9 00 vpshufd $0, %xmm1, %xmm1 0x607c56a2: c4 c1 7a 7f 8e 40 0a 00 vmovdqu %xmm1, 0xa40(%r14) 0x607c56aa: 00 when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1". This resulted in our incorrectly setting the output vector to q26=0000320000003200:0000320000003200 when given an input of x21 == 0000000002803200 rather than the expected all-zeroes. Pass the correct source register number to tcg_out_vex_modrm() for these insns. Fixes: 770c2fc7bb70804a Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: workaround branch instruction overflow in tcg_out_qemu_ld/stLaurent Vivier
ppc64 uses a BC instruction to call the tcg_out_qemu_ld/st slow path. BC instruction uses a relative address encoded on 14 bits. The slow path functions are added at the end of the generated instructions buffer, in the reverse order of the callers. So more we have slow path functions more the distance between the caller (BC) and the function increases. This patch changes the behavior to generate the functions in the same order of the callers. Cc: qemu-stable@nongnu.org Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20180429235840.16659-1-lvivier@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Improve TCGv_ptr supportRichard Henderson
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros. Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr, tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32. Use inlines instead of macros where possible. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Allow wider vectors for cmp and mulRichard Henderson
In db432672, we allow wide inputs for operations such as add. However, in 212be173 and 3774030a we didn't do the same for compare and multiply. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg/arm: Fix memory barrier encodingHenry Wertz
I found with qemu 2.11.x or newer that I would get an illegal instruction error running some Intel binaries on my ARM chromebook. On investigation, I found it was quitting on memory barriers. qemu instruction: mb $0x31 was translating as: 0x604050cc: 5bf07ff5 blpl #0x600250a8 After patch it gives: 0x604050cc: f57ff05b dmb ish In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be correct based on online docs, but due to some endian-related shenanigans it had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory barrier for ARMv6) also should be byte swapped (and this patch does so). I have not checked for correctness of aarch64's barrier instruction. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Henry Wertz <hwertz10@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Document INDEX_mul[us]h_*Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-04-16tcg/mips: Handle large offsets from target env to tlb_tablePeter Maydell
The MIPS TCG target makes the assumption that the offset from the target env pointer to the tlb_table is less than about 64K. This used to be true, but gradual addition of features to the Arm target means that it's no longer true there. This results in the build-time assertion failing: In file included from /home/pm215/qemu/include/qemu/osdep.h:36:0, from /home/pm215/qemu/tcg/tcg.c:28: /home/pm215/qemu/tcg/mips/tcg-target.inc.c: In function ‘tcg_out_tlb_load’: /home/pm215/qemu/include/qemu/compiler.h:90:36: error: static assertion failed: "not expecting: offsetof(CPUArchState, tlb_table[NB_MMU_MODES - 1][1]) > 0x7ff0 + 0x7fff" #define QEMU_BUILD_BUG_MSG(x, msg) _Static_assert(!(x), msg) ^ /home/pm215/qemu/include/qemu/compiler.h:98:30: note: in expansion of macro ‘QEMU_BUILD_BUG_MSG’ #define QEMU_BUILD_BUG_ON(x) QEMU_BUILD_BUG_MSG(x, "not expecting: " #x) ^ /home/pm215/qemu/tcg/mips/tcg-target.inc.c:1236:9: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ QEMU_BUILD_BUG_ON(offsetof(CPUArchState, ^ /home/pm215/qemu/rules.mak:66: recipe for target 'tcg/tcg.o' failed An ideal long term approach would be to rearrange the CPU state so that the tlb_table was not so far along it, but this is tricky because it would move it from the "not cleared on CPU reset" part of the struct to the "cleared on CPU reset" part. As a simple fix for the 2.12 release, make the MIPS TCG target handle an arbitrary offset by emitting more add instructions. This will mean an extra instruction in the fastpath for TCG loads and stores for the affected guests (currently just aarch64-softmmu). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20180413142336.32163-1-peter.maydell@linaro.org
2018-04-10tcg: Introduce tcg_set_insn_start_paramRichard Henderson
The parameters for tcg_gen_insn_start are target_ulong, which may be split into two TCGArg parameters for storage in the opcode on 32-bit hosts. Fixes the ARM target and its direct use of tcg_set_insn_param, which would set the wrong argument in the 64-on-32 case. Cc: qemu-stable@nongnu.org Reported-by: alarson@ddci.com Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180410003558.2470-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-28tcg: Mark muluh_i64 and mulsh_i64 as 64-bit opsRichard Henderson
Failure to do so results in the tcg optimizer sign-extending any constant fold from 32-bits. This turns out to be visible in the RISC-V testsuite using a host that emits these opcodes (e.g. any non-x86_64). Reported-by: Michael Clark <mjc@sifive.com> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg: Add choose_vector_sizeRichard Henderson
This unifies 5 copies of checks for supported vector size, and in the process fixes a missing check in tcg_gen_gvec_2s. This lead to an assertion failure for 64-bit vector multiply, which is not available in the AVX instruction set. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg/i386: Support INDEX_op_dup2_vec for -m32Richard Henderson
Unknown why -m32 was passing with gcc but not clang; it should have failed for both. This would be used for tcg_gen_dup_i64_vec, and visible with the right TB and an aarch64 guest. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg: Improve tcg_gen_muli_i32/i64Richard Henderson
Convert multiplication by power of two to left shift. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/aarch64: Add vector operationsRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/i386: Add vector operationsRichard Henderson
The x86 vector instruction set is extremely irregular. With newer editions, Intel has filled in some of the blanks. However, we don't get many 64-bit operations until SSE4.2, introduced in 2009. The subsequent edition was for AVX1, introduced in 2011, which added three-operand addressing, and adjusts how all instructions should be encoded. Given the relatively narrow 2 year window between possible to support and desirable to support, and to vastly simplify code maintainence, I am only planning to support AVX1 and later cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/optimize: Handle vector opcodes during optimizeRichard Henderson
Trivial move and constant propagation. Some identity and constant function folding, but nothing that requires knowledge of the size of the vector element. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector helpers with a scalar operandRichard Henderson
Use dup to convert a non-constant scalar to a third vector. Add addition, multiplication, and logical operations with an immediate. Add addition, subtraction, multiplication, and logical operations with a non-constant scalar. Allow for the front-end to build operations in which the scalar operand comes first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic helpers for saturating arithmeticRichard Henderson
No vector ops as yet. SSE only has direct support for 8- and 16-bit saturation; handling 32- and 64-bit saturation is much more expensive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for multiplicationRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for comparisonsRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for constant shiftsRichard Henderson
Opcodes are added for scalar and vector shifts, but considering the varied semantics of these do not expose them to the front ends. Do go ahead and provide them in case they are needed for backend expansion. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector expandersRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Standardize integral arguments to expandersRichard Henderson
Some functions use intN_t arguments, some use uintN_t, some just used "unsigned". To aid putting function pointers in tables, we need consistency. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add types and basic operations for host vectorsRichard Henderson
Nothing uses or enables them yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Allow multiple word entries into the constant poolRichard Henderson
This will be required for storing vector constants. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Allow a 32-bit offset to the constant poolRichard Henderson
We recently relaxed the limit of the number of opcodes that can appear in a TranslationBlock. In certain cases this has resulted in relocation overflow. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Support tlb offsets larger than 64kRichard Henderson
AArch64 with SVE has an offset of 80k to the 8th TLB. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/arm: Support tlb offsets larger than 64kRichard Henderson
AArch64 with SVE has an offset of 80k to the 8th TLB. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/arm: Fix double-word comparisonsRichard Henderson
The code sequence we were generating was only good for unsigned comparisons. For signed comparisions, use the sequence from gcc. Fixes booting of ppc64 firmware, with a patch changing the code sequence for ppc comparisons. Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Allow 6 arguments to TCG helpersRichard Henderson
We already handle this in the backends, and the lifetime datum for the TCGOp is already large enough. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Add tcg_signed_condRichard Henderson
Complimenting the existing tcg_unsigned_cond. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Generalize TCGOp parametersRichard Henderson
We had two fields specific to INDEX_op_call. Rename these and add some macros so that the fields may be reused for other opcodes. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Dynamically allocate TCGOpsRichard Henderson
With no fixed array allocation, we can't overflow a buffer. This will be important as optimizations related to host vectors may expand the number of ops used. Use QTAILQ to link the ops together. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-12-29tcg: Remove TCGV_UNUSED* and TCGV_IS_UNUSED*Richard Henderson
These are now trivial sets and tests against NULL. Unwrap. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-03tcg/s390x: Use constant pool for prologueRichard Henderson
Rather than have separate code only used for guest_base, rely on a recent change to handle constant pool entries. Cc: qemu-s390x@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-11-03tcg: Allow constant pool entries in the prologueRichard Henderson
Both ARMv6 and AArch64 currently may drop complex guest_base values into the constant pool. But generic code wasn't expecting that, and the pool is not emitted. Correct that. Tested-by: Emilio G. Cota <cota@braap.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: Initialize cpu_env genericallyRichard Henderson
This is identical for each target. So, move the initialization to common code. Move the variable itself out of tcg_ctx and name it cpu_env to minimize changes within targets. This also means we can remove tcg_global_reg_new_{ptr,i32,i64}, since there are no longer global-register temps created by targets. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-10-24tcg: enable multiple TCG contexts in softmmuEmilio G. Cota
This enables parallel TCG code generation. However, we do not take advantage of it yet since tb_lock is still held during tb_gen_code. In user-mode we use a single TCG context; see the documentation added to tcg_region_init for the rationale. Note that targets do not need any conversion: targets initialize a TCGContext (e.g. defining TCG globals), and after this initialization has finished, the context is cloned by the vCPU threads, each of them keeping a separate copy. TCG threads claim one entry in tcg_ctxs[] by atomically increasing n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's of that variable and tcg_ctxs; they are there just to play nice with analysis tools such as thread sanitizer. Note that we do not allocate an array of contexts (we allocate an array of pointers instead) because when tcg_context_init is called, we do not know yet how many contexts we'll use since the bool behind qemu_tcg_mttcg_enabled() isn't set yet. Previous patches folded some TCG globals into TCGContext. The non-const globals remaining are only set at init time, i.e. before the TCG threads are spawned. Here is a list of these set-at-init-time globals under tcg/: Only written by tcg_context_init: - indirect_reg_alloc_order - tcg_op_defs Only written by tcg_target_init (called from tcg_context_init): - tcg_target_available_regs - tcg_target_call_clobber_regs - arm: arm_arch, use_idiv_instructions - i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt, have_movbe, have_popcnt - mips: use_movnz_instructions, use_mips32_instructions, use_mips32r2_instructions, got_sigill (tcg_target_detect_isa) - ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr - s390: tb_ret_addr, s390_facilities - sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines), use_vis3_instructions Only written by tcg_prologue_init: - 'struct jit_code_entry one_entry' - aarch64: tb_ret_addr - arm: tb_ret_addr - i386: tb_ret_addr, guest_base_flags - ia64: tb_ret_addr - mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 16:48:26 +0000