aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)Author
2018-10-18tcg: Split CONFIG_ATOMIC128Richard Henderson
GCC7+ will no longer advertise support for 16-byte __atomic operations if only cmpxchg is supported, as for x86_64. Fortunately, x86_64 still has support for __sync_compare_and_swap_16 and we can make use of that. AArch64 does not have, nor ever has had such support, so open-code it. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: distribute tcg_time into TCG contextsEmilio G. Cota
When we implemented per-vCPU TCG contexts, we forgot to also distribute the tcg_time counter, which has remained as a global accessed without any serialization, leading to potentially missed counts. Fix it by distributing the field over the TCG contexts, embedding it into TCGProfile with a field called "cpu_exec_time", which is more descriptive than "tcg_time". Add a function to query this value directly, and for completeness, fill in the field in tcg_profile_snapshot, even though its callers do not use it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-5-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: plug holes in struct TCGProfileEmilio G. Cota
This plugs two 4-byte holes in 64-bit. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: fix use of uninitialized variable under CONFIG_PROFILEREmilio G. Cota
We forgot to initialize n in commit 15fa08f845 ("tcg: Dynamically allocate TCGOps", 2017-12-29). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20181010144853.13005-3-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-18tcg: Implement CPU_LOG_TB_NOCHAIN during expansionRichard Henderson
Rather than test NOCHAIN before linking, do not emit the goto_tb opcode at all. We already do this for goto_ptr. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-09-26tcg/i386: fix vector operations on 32-bit hostsRoman Kapl
The TCG backend uses LOWREGMASK to get the low 3 bits of register numbers. This was defined as no-op for 32-bit x86, with the assumption that we have eight registers anyway. This assumption is not true once we have xmm regs. Since LOWREGMASK was a no-op, xmm register indidices were wrong in opcodes and have overflown into other opcode fields, wreaking havoc. To trigger these problems, you can try running the "movi d8, #0x0" AArch64 instruction on 32-bit x86. "vpxor %xmm0, %xmm0, %xmm0" should be generated, but instead TCG generated "vpxor %xmm0, %xmm0, %xmm2". Fixes: 770c2fc7bb ("Add vector operations") Signed-off-by: Roman Kapl <rka@sysgo.com> Message-Id: <20180824131734.18557-1-rka@sysgo.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-06tcg/optimize: Do not skip default processing of dup_vecRichard Henderson
If we do not opimize away dup_vec, we must mark its output as changed. Fixes: 170ba88f45b Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 20180805233258.31892-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-23tcg/i386: Mark xmm registers call-clobberedRichard Henderson
When host vector registers and operations were introduced, I failed to mark the registers call clobbered as required by the ABI. Fixes: 770c2fc7bb7 Cc: qemu-stable@nongnu.org Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-19tcg/aarch64: limit mul_vec sizeAlex Bennée
In AdvSIMD we can only do 32x32 integer multiples although SVE is capable of larger 64 bit multiples. As a result we can end up generating invalid opcodes. Fix this by only reprting we can emit mul vector ops if the size is small enough. Fixes a crash on: sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin When running on AArch64 hardware. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org> [rth: Removed the tcg_debug_assert -- there are plenty of other cases that we do not diagnose within the insn encoding helpers.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-09tcg: Restrict check_size_impl to multiples of the line sizeRichard Henderson
Normally this is automatic in the size restrictions that are placed on vector sizes coming from the implementation. However, for the legitimate size tuple [oprsz=8, maxsz=32], we need to clear the final 24 bytes of the vector register. Without this check, do_dup selects TCG_TYPE_V128 and clears only 16 bytes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180705191929.30773-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15tcg: Reduce max TB opcode countRichard Henderson
Also, assert that we don't overflow any of two different offsets into the TB. Both unwind and goto_tb both record a uint16_t for later use. This fixes an arm-softmmu test case utilizing NEON in which there is a TB generated that runs to 7800 opcodes, and compiles to 96k on an x86_64 host. This overflows the 16-bit offset in which we record the goto_tb reset offset. Because of that overflow, we install a jump destination that goes to neverland. Boom. With this reduced op count, the same TB compiles to about 48k for aarch64, ppc64le, and x86_64 hosts, and neither assertion fires. Cc: qemu-stable@nongnu.org Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: remove tb_lockEmilio G. Cota
Use mmap_lock in user-mode to protect TCG state and the page descriptors. In !user-mode, each vCPU has its own TCG state, so no locks needed. Per-page locks are used to protect the page descriptors. Per-TB locks are used in both modes to protect TB jumps. Some notes: - tb_lock is removed from notdirty_mem_write by passing a locked page_collection to tb_invalidate_phys_page_fast. - tcg_tb_lookup/remove/insert/etc have their own internal lock(s), so there is no need to further serialize access to them. - do_tb_flush is run in a safe async context, meaning no other vCPU threads are running. Therefore acquiring mmap_lock there is just to please tools such as thread sanitizer. - Not visible in the diff, but tb_invalidate_phys_page already has an assert_memory_lock. - cpu_io_recompile is !user-only, so no mmap_lock there. - Added mmap_unlock()'s before all siglongjmp's that could be called in user-mode while mmap_lock is held. + Added an assert for !have_mmap_lock() after returning from the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic. Performance numbers before/after: Host: AMD Opteron(tm) Processor 6376 ubuntu 17.04 ppc64 bootup+shutdown time 700 +-+--+----+------+------------+-----------+------------*--+-+ | + + + + + *B | | before ***B*** ** * | |tb lock removal ###D### *** | 600 +-+ *** +-+ | ** # | | *B* #D | | *** * ## | 500 +-+ *** ### +-+ | * *** ### | | *B* # ## | | ** * #D# | 400 +-+ ** ## +-+ | ** ### | | ** ## | | ** # ## | 300 +-+ * B* #D# +-+ | B *** ### | | * ** #### | | * *** ### | 200 +-+ B *B #D# +-+ | #B* * ## # | | #* ## | | + D##D# + + + + | 100 +-+--+----+------+------------+-----------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/HwmBHXe debian jessie aarch64 bootup+shutdown time 90 +-+--+-----+-----+------------+------------+------------+--+-+ | + + + + + + | | before ***B*** B | 80 +tb lock removal ###D### **D +-+ | **### | | **## | 70 +-+ ** # +-+ | ** ## | | ** # | 60 +-+ *B ## +-+ | ** ## | | *** #D | 50 +-+ *** ## +-+ | * ** ### | | **B* ### | 40 +-+ **** # ## +-+ | **** #D# | | ***B** ### | 30 +-+ B***B** #### +-+ | B * * # ### | | B ###D# | 20 +-+ D ##D## +-+ | D# | | + + + + + + | 10 +-+--+-----+-----+------------+------------+------------+--+-+ 1 8 16 Guest CPUs 48 64 png: https://imgur.com/iGpGFtv The gains are high for 4-8 CPUs. Beyond that point, however, unrelated lock contention significantly hurts scalability. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: move tb_ctx.tb_phys_invalidate_count to tcg_ctxEmilio G. Cota
Thereby making it per-TCGContext. Once we remove tb_lock, this will avoid an atomic increment every time a TB is invalidated. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: track TBs with per-region BST'sEmilio G. Cota
This paves the way for enabling scalable parallel generation of TCG code. Instead of tracking TBs with a single binary search tree (BST), use a BST for each TCG region, protecting it with a lock. This is as scalable as it gets, since each TCG thread operates on a separate region. The core of this change is the introduction of struct tcg_region_tree, which contains a pointer to a GTree and an associated lock to serialize accesses to it. We then allocate an array of tcg_region_tree's, adding the appropriate padding to avoid false sharing based on qemu_dcache_linesize. Given a tc_ptr, we first find the corresponding region_tree. This is done by special-casing the first and last regions first, since they might be of size != region.size; otherwise we just divide the offset by region.stride. I was worried about this division (several dozen cycles of latency), but profiling shows that this is not a fast path. Note that region.stride is not required to be a power of two; it is only required to be a multiple of the host's page size. Note that with this design we can also provide consistent snapshots about all region trees at once; for instance, tcg_tb_foreach acquires/releases all region_tree locks before/after iterating over them. For this reason we now drop tb_lock in dump_exec_info(). As an alternative I considered implementing a concurrent BST, but this can be tricky to get right, offers no consistent snapshots of the BST, and performance and scalability-wise I don't think it could ever beat having separate GTrees, given that our workload is insert-mostly (all concurrent BST designs I've seen focus, understandably, on making lookups fast, which comes at the expense of convoluted, non-wait-free insertions/removals). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg/i386: Use byte form of xgetbv instructionJohn Arbuckle
The assembler in most versions of Mac OS X is pretty old and does not support the xgetbv instruction. To go around this problem, the raw encoding of the instruction is used instead. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Message-Id: <20180604215102.11002-1-programmingkidx@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-20tcg: fix s/compliment/complement/ typosEmilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180510' into staging target-arm queue: * hw/arm/iotkit.c: fix minor memory leak * softfloat: fix wrong-exception-flags bug for multiply-add corner case * arm: isolate and clean up DTB generation * implement Arm v8.1-Atomics extension * Fix some bugs and missing instructions in the v8.2-FP16 extension # gpg: Signature made Thu 10 May 2018 18:44:34 BST # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits) target/arm: Clear SVE high bits for FMOV target/arm: Fix float16 to/from int16 target/arm: Implement vector shifted FCVT for fp16 target/arm: Implement vector shifted SCVF/UCVF for fp16 target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only target/arm: Implement CAS and CASP target/arm: Fill in disas_ldst_atomic target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode target/riscv: Use new atomic min/max expanders tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add tcg: Introduce atomic helpers for integer min/max target/xtensa: Use new min/max expanders target/arm: Use new min/max expanders tcg: Introduce helpers for integer min/max atomic.h: Work around gcc spurious "unused value" warning make sure that we aren't overwriting mc->get_hotplug_handler by accident arm/boot: split load_dtb() from arm_load_kernel() platform-bus-device: use device plug callback instead of machine_done notifier pc: simplify MachineClass::get_hotplug_handler handling softfloat: Handle default NaN mode after pickNaNMulAdd, not before ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # target/riscv/translate.c
2018-05-10tcg: Introduce atomic helpers for integer min/maxRichard Henderson
Given that this atomic operation will be used by both risc-v and aarch64, let's not duplicate code across the two targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-10tcg: Introduce helpers for integer min/maxRichard Henderson
These operations are re-invented by several targets so far. Several supported hosts have insns for these, so place the expanders out-of-line for a future introduction of tcg opcodes. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180508151437.4232-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-09tcg: Limit the number of ops in a TBRichard Henderson
In 6001f7729e12 we partially attempt to address the branch displacement overflow caused by 15fa08f845. However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c is a testcase that contains a TB so large as to overflow anyway. The limit here of 8000 ops produces a maximum output TB size of 24112 bytes on a ppc64le host with that test case. This is still much less than the maximum forward branch distance of 32764 bytes. Cc: qemu-stable@nongnu.org Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps") Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09tcg/i386: Fix dup_vec in non-AVX2 codepathPeter Maydell
The VPUNPCKLD* instructions are all "non-destructive source", indicated by "NDS" in the encoding string in the x86 ISA manual. This means that they take two source operands, one of which is encoded in the VEX.vvvv field. We were incorrectly treating them as if they were destructive-source and passing 0 as the 'v' argument of tcg_out_vex_modrm(). This meant we were always using %xmm0 as one of the source operands, causing incorrect results if the register allocator happened to want to use something else. For instance the input AArch64 insn: DUP v26.16b, w21 which becomes TCG IR ops: dup_vec v128,e8,tmp2,x21 st_vec v128,e8,tmp2,env,$0xa40 was assembled to: 0x607c568c: c4 c1 7a 7e 86 e8 00 00 vmovq 0xe8(%r14), %xmm0 0x607c5694: 00 0x607c5695: c5 f9 60 c8 vpunpcklbw %xmm0, %xmm0, %xmm1 0x607c5699: c5 f9 61 c9 vpunpcklwd %xmm1, %xmm0, %xmm1 0x607c569d: c5 f9 70 c9 00 vpshufd $0, %xmm1, %xmm1 0x607c56a2: c4 c1 7a 7f 8e 40 0a 00 vmovdqu %xmm1, 0xa40(%r14) 0x607c56aa: 00 when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1". This resulted in our incorrectly setting the output vector to q26=0000320000003200:0000320000003200 when given an input of x21 == 0000000002803200 rather than the expected all-zeroes. Pass the correct source register number to tcg_out_vex_modrm() for these insns. Fixes: 770c2fc7bb70804a Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180504153431.5169-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: workaround branch instruction overflow in tcg_out_qemu_ld/stLaurent Vivier
ppc64 uses a BC instruction to call the tcg_out_qemu_ld/st slow path. BC instruction uses a relative address encoded on 14 bits. The slow path functions are added at the end of the generated instructions buffer, in the reverse order of the callers. So more we have slow path functions more the distance between the caller (BC) and the function increases. This patch changes the behavior to generate the functions in the same order of the callers. Cc: qemu-stable@nongnu.org Fixes: 15fa08f845 ("tcg: Dynamically allocate TCGOps") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20180429235840.16659-1-lvivier@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Improve TCGv_ptr supportRichard Henderson
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros. Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr, tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32. Use inlines instead of macros where possible. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Allow wider vectors for cmp and mulRichard Henderson
In db432672, we allow wide inputs for operations such as add. However, in 212be173 and 3774030a we didn't do the same for compare and multiply. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg/arm: Fix memory barrier encodingHenry Wertz
I found with qemu 2.11.x or newer that I would get an illegal instruction error running some Intel binaries on my ARM chromebook. On investigation, I found it was quitting on memory barriers. qemu instruction: mb $0x31 was translating as: 0x604050cc: 5bf07ff5 blpl #0x600250a8 After patch it gives: 0x604050cc: f57ff05b dmb ish In short, I found INSN_DMB_ISH (memory barrier for ARMv7) appeared to be correct based on online docs, but due to some endian-related shenanigans it had to be byte-swapped to suit qemu; it appears INSN_DMB_MCR (memory barrier for ARMv6) also should be byte swapped (and this patch does so). I have not checked for correctness of aarch64's barrier instruction. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Henry Wertz <hwertz10@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-01tcg: Document INDEX_mul[us]h_*Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-04-16tcg/mips: Handle large offsets from target env to tlb_tablePeter Maydell
The MIPS TCG target makes the assumption that the offset from the target env pointer to the tlb_table is less than about 64K. This used to be true, but gradual addition of features to the Arm target means that it's no longer true there. This results in the build-time assertion failing: In file included from /home/pm215/qemu/include/qemu/osdep.h:36:0, from /home/pm215/qemu/tcg/tcg.c:28: /home/pm215/qemu/tcg/mips/tcg-target.inc.c: In function ‘tcg_out_tlb_load’: /home/pm215/qemu/include/qemu/compiler.h:90:36: error: static assertion failed: "not expecting: offsetof(CPUArchState, tlb_table[NB_MMU_MODES - 1][1]) > 0x7ff0 + 0x7fff" #define QEMU_BUILD_BUG_MSG(x, msg) _Static_assert(!(x), msg) ^ /home/pm215/qemu/include/qemu/compiler.h:98:30: note: in expansion of macro ‘QEMU_BUILD_BUG_MSG’ #define QEMU_BUILD_BUG_ON(x) QEMU_BUILD_BUG_MSG(x, "not expecting: " #x) ^ /home/pm215/qemu/tcg/mips/tcg-target.inc.c:1236:9: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ QEMU_BUILD_BUG_ON(offsetof(CPUArchState, ^ /home/pm215/qemu/rules.mak:66: recipe for target 'tcg/tcg.o' failed An ideal long term approach would be to rearrange the CPU state so that the tlb_table was not so far along it, but this is tricky because it would move it from the "not cleared on CPU reset" part of the struct to the "cleared on CPU reset" part. As a simple fix for the 2.12 release, make the MIPS TCG target handle an arbitrary offset by emitting more add instructions. This will mean an extra instruction in the fastpath for TCG loads and stores for the affected guests (currently just aarch64-softmmu). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20180413142336.32163-1-peter.maydell@linaro.org
2018-04-10tcg: Introduce tcg_set_insn_start_paramRichard Henderson
The parameters for tcg_gen_insn_start are target_ulong, which may be split into two TCGArg parameters for storage in the opcode on 32-bit hosts. Fixes the ARM target and its direct use of tcg_set_insn_param, which would set the wrong argument in the 64-on-32 case. Cc: qemu-stable@nongnu.org Reported-by: alarson@ddci.com Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180410003558.2470-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-28tcg: Mark muluh_i64 and mulsh_i64 as 64-bit opsRichard Henderson
Failure to do so results in the tcg optimizer sign-extending any constant fold from 32-bits. This turns out to be visible in the RISC-V testsuite using a host that emits these opcodes (e.g. any non-x86_64). Reported-by: Michael Clark <mjc@sifive.com> Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg: Add choose_vector_sizeRichard Henderson
This unifies 5 copies of checks for supported vector size, and in the process fixes a missing check in tcg_gen_gvec_2s. This lead to an assertion failure for 64-bit vector multiply, which is not available in the AVX instruction set. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg/i386: Support INDEX_op_dup2_vec for -m32Richard Henderson
Unknown why -m32 was passing with gcc but not clang; it should have failed for both. This would be used for tcg_gen_dup_i64_vec, and visible with the right TB and an aarch64 guest. Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-16tcg: Improve tcg_gen_muli_i32/i64Richard Henderson
Convert multiplication by power of two to left shift. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/aarch64: Add vector operationsRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/i386: Add vector operationsRichard Henderson
The x86 vector instruction set is extremely irregular. With newer editions, Intel has filled in some of the blanks. However, we don't get many 64-bit operations until SSE4.2, introduced in 2009. The subsequent edition was for AVX1, introduced in 2011, which added three-operand addressing, and adjusts how all instructions should be encoded. Given the relatively narrow 2 year window between possible to support and desirable to support, and to vastly simplify code maintainence, I am only planning to support AVX1 and later cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/optimize: Handle vector opcodes during optimizeRichard Henderson
Trivial move and constant propagation. Some identity and constant function folding, but nothing that requires knowledge of the size of the vector element. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector helpers with a scalar operandRichard Henderson
Use dup to convert a non-constant scalar to a third vector. Add addition, multiplication, and logical operations with an immediate. Add addition, subtraction, multiplication, and logical operations with a non-constant scalar. Allow for the front-end to build operations in which the scalar operand comes first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic helpers for saturating arithmeticRichard Henderson
No vector ops as yet. SSE only has direct support for 8- and 16-bit saturation; handling 32- and 64-bit saturation is much more expensive. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for multiplicationRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for comparisonsRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector ops for constant shiftsRichard Henderson
Opcodes are added for scalar and vector shifts, but considering the varied semantics of these do not expose them to the front ends. Do go ahead and provide them in case they are needed for backend expansion. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add generic vector expandersRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Standardize integral arguments to expandersRichard Henderson
Some functions use intN_t arguments, some use uintN_t, some just used "unsigned". To aid putting function pointers in tables, we need consistency. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Add types and basic operations for host vectorsRichard Henderson
Nothing uses or enables them yet. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg: Allow multiple word entries into the constant poolRichard Henderson
This will be required for storing vector constants. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Allow a 32-bit offset to the constant poolRichard Henderson
We recently relaxed the limit of the number of opcodes that can appear in a TranslationBlock. In certain cases this has resulted in relocation overflow. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Support tlb offsets larger than 64kRichard Henderson
AArch64 with SVE has an offset of 80k to the 8th TLB. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/arm: Support tlb offsets larger than 64kRichard Henderson
AArch64 with SVE has an offset of 80k to the 8th TLB. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 06:17:27 +0000