| Age | Commit message (Collapse) | Author |
|---|
|
Fill in the parameters for libffi for Int128.
Adjust the interpreter to allow for 16-byte return values.
Adjust tcg_out_call to record the return value length.
Call parameters are no longer all the same size, so we
cannot reuse the same call_slots array for every function.
Compute it each time now, but only fill in slots required
for the call we're about to make.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Similar to the existing set_jmp_reset_offset. Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit. With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Unused since commit 7b7d8b2d9a ("tcg/tci: Use ffi for calls").
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
There is nothing in this environment variable that cannot
be done better with -d flags. There is nothing special
about TCI that warrants this hack.
Moreover, it does not compile -- remove it.
Reported-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The last entry of DEF_HELPERS_FLAGS_n is DEF_HELPER_FLAGS_7 and
thus the MAX_OPC_PARAM_IARGS should be 7.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20220227113127.414533-2-ziqiaokong@gmail.com>
Fixes: e6cadf49c3d ("tcg: Add support for a helper with 7 arguments")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The tcg_out_ldst helper will handle out-of-range offsets.
We haven't actually encountered any, since we haven't run
across the assert within tcg_out_op_rrs, but an out-of-range
offset would not be impossible in future.
Fixes: 65089889183 ("tcg/tci: Change encoding to uint32_t units")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since 6eea04347eb6, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The existing interpreter zero-extends, ignoring high bits.
Simply add a separate sign-extension opcode if required.
Ensure that the interpreter supports ext16s when bswap16 is enabled.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We already had the 32-bit versions for a 32-bit host; expand this
to 64-bit hosts as well. The 64-bit opcodes are new.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We already had mulu2_i32 for a 32-bit host; expand this to 64-bit
hosts as well. The muls2_i32 and the 64-bit opcodes are new.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
These were already present in tcg-target.c.inc,
but not in the interpreter.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
When this opcode is not available in the backend, tcg middle-end
will expand this as a series of 5 opcodes. So implementing this
saves bytecode space.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This operation is critical to staying within the interpretation
loop longer, which avoids the overhead of setup and teardown for
many TBs.
The check in tcg_prologue_init is disabled because TCI does
want to use NULL to indicate exit, as opposed to branching to
a real epilogue.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This removes all of the problems with unaligned accesses
to the bytecode stream.
With an 8-bit opcode at the bottom, we have 24 bits remaining,
which are generally split into 6 4-bit slots. This fits well
with the maximum length opcodes, e.g. INDEX_op_add2_i32, which
have 6 register operands.
We have, in previous patches, rearranged things such that there
are no operations with a label which have more than one other
operand. Which leaves us with a 20-bit field in which to encode
a label, giving us a maximum TB size of 512k -- easily large.
Change the INDEX_op_tci_movi_{i32,i64} opcodes to tci_mov[il].
The former puts the immediate in the upper 20 bits of the insn,
like we do for the label displacement. The later uses a label
to reference an entry in the constant pool. Thus, in the worst
case we still have a single memory reference for any constant,
but now the constants are out-of-line of the bytecode and can
be shared between different moves saving space.
Change INDEX_op_call to use a label to reference a pair of
pointers in the constant pool. This removes the only slightly
dodgy link with the layout of struct TCGHelperInfo.
The re-encode cannot be done in pieces.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The encoding planned for tci does not have enough room for
brcond2, with 4 registers and a condition as input as well
as the label. Resolve the condition into TCG_REG_TMP, and
relax brcond to one register plus a label, considering the
condition to always be reg != 0.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We're about to adjust the offset range on host memory ops,
and the format of branches. Both will require a temporary.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This requires adjusting where arguments are stored.
Place them on the stack at left-aligned positions.
Adjust the stack frame to be at entirely positive offsets.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
As the only call-clobbered regs for TCI, these should
receive the least priority.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The current setting is much too pessimistic. Indicating only
the one or two registers that are actually assigned after a
call should avoid unnecessary movement between the register
array and the stack array.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Remove the ifdef ladder and move each define into the
appropriate header file.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:
1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
const_args[TCG_MAX_OP_ARGS] aguments.
This duality causes warnings on GCC 11 and prevents build using
--enable-werror. As second version provides more information,
unify functions prototypes to this variant.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
At the same time, validate the type argument in tcg_out_mov.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
