aboutsummaryrefslogtreecommitdiff
path: root/tcg/tcg.c
AgeCommit message (Collapse)Author
2015-03-13tcg: Use tcg_malloc to allocate TCGLabelRichard Henderson
Pre-allocating 512 of them per TB is a waste. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Remove unused opcodesRichard Henderson
We no longer need INDEX_op_end to terminate the list, nor do we need 5 forms of nop, since we just remove the TCGOp instead. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Remove opcodes instead of noping them outRichard Henderson
With the linked list scheme we need not leave nops in the stream that we need to process later. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Put opcodes in a linked listRichard Henderson
The previous setup required ops and args to be completely sequential, and was error prone when it came to both iteration and optimization. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move some opcode generation functions out of lineRichard Henderson
Some of these functions are really quite large. We have a number of things that ought to be circularly dependent, but we duplicated code to break that chain for the inlines. This saved 25% of the code size of one of the translators I examined. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-12-17tcg: add separate monitor command to dump opcode countersMax Filippov
Currently 'info jit' outputs half of the information to monitor and the rest to qemu log. Dumping opcode counts to monitor as a part of 'info jit' command doesn't sound useful. Add new monitor command 'info opcount' that only dumps opcode counters. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2014-08-24tcg: dump op count into qemu logzhanghailiang
fopen() may fail and it does not check its return vaule here, it is better to dump op count to the normal log file. Signed-off-by: Li Liu <john.liuli@huawei.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-24tcg: mark tcg_out* and tcg_patch* with attribute 'unused'Peter Maydell
The tcg_out* and tcg_patch* functions are utility routines that may or may not be used by a particular backend; mark them with the 'unused' attribute to suppress spurious warnings if they aren't used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-23tcg-ppc: Merge cache-utils into the backendRichard Henderson
As a "utility", it only supported ppc, and in a way that other tcg backends provided directly in tcg-target.h. Removing this disparity is easier now that the two ppc backends are merged. Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Allow the debug_frame data structure to be constantRichard Henderson
Adjust the FDE to point to the code_buffer after we've copied it to the image, rather than requiring that the backend set it prior. This allows the backend to use read-only storage for its data. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Remove sizemask and flags arguments to tcg_gen_callNRichard Henderson
Take them from the TCGHelperInfo struct instead. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Save flags and computed sizemask in TCGHelperInfoRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Register the helper info struct rather than the nameRichard Henderson
This will let us find all the info from the hash table. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Push tcg-runtime routines into exec/helper-*Richard Henderson
Rather than special casing them, use the standard mechanisms for tcg helper generation. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-14tcg: Fix tcg_reg_alloc_mov vs no-op truncationRichard Henderson
Commit af3cbfbe8018ccc16fb3a0048e928f66f0d05e87 hoisted some "common" loads of the temporary type, forgetting that the types could differ during truncating moves. This affects the correctness of the memory offset on big-endian hosts. Tested-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Use tcg_target_available_regs in tcg_reg_alloc_movRichard Henderson
The move opcodes are special in that their constraints must cover all available registers. So instead of checking the constraints, just use the available registers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Make call address a constant parameterRichard Henderson
Avoid allocating a tcg temporary to hold the constant address, and instead place it directly into the op_call arguments. At the same time, convert to the newly introduced tcg_out_call backend function, rather than invoking tcg_out_op for the call. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Define tcg_insn_unit for code pointersRichard Henderson
To be defined by the tcg backend based on the elemental unit of the ISA. During the transition, allow TCG_TARGET_INSN_UNIT_SIZE to be undefined, which allows us to default tcg_insn_unit to the current uint8_t. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Avoid undefined behaviour patching code at unaligned addressesPeter Maydell
To avoid C undefined behaviour when patching generated code, provide wrappers tcg_patch8/16/32/64 which use the usual memcpy trick, and use them in the i386 backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Avoid stores to unaligned addressesPeter Maydell
Avoid stores to unaligned addresses in TCG code generation, by using the usual memcpy() approach. (Using bswap.h would drag a lot of QEMU baggage into TCG, so it's simpler just to do direct memcpy() here.) Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg-sparc: Use 64-bit registers with sparcv8plusRichard Henderson
Quite a lot of effort was spent composing and decomposing 64-bit quantities in registers, when we should just create them and leave them as one 64-bit register. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Add TCGType parameter to tcg_target_const_matchRichard Henderson
Most 64-bit targets need to be able to ignore the high bits of a TCG_TYPE_I32 value. Suggested-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-02tcg: Fix typo in comment (dependancies -> dependencies)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-15TCG: Fix 32-bit host allocation typoRichard Henderson
The second half register of a 64-bit temp on a 32-bit host was allocated with the wrong base_type. The base_type of the second half register is never checked, but for consistency it should be the same as the first half. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-30TCG: Fix I64-on-32bit-host temporariesAlexander Graf
We have cache pools of temporaries that we can reuse later when they've already been allocated before. These cache pools differenciate between the target TCG variable type they contain. So we have one pool for I32 and one pool for I64 variables. On a 32bit system, we can't work with 64bit registers though. So instead we spawn two I32 temporaries for every I64 temporary we create. All caching works the same way as on a real 64-bit system though: We create a cache entry in the 64bit array for the first i32 index. However, when we free such a temporary we free it to the pool of its type (which is always i32 on 32bit systems) rather than its base_type (which is i64 or i32 depending on the variable). This means we put a temporary that is of base_type == i64 into the i32 preallocated temporary pool. Eventually, this results in failures like this on 32bit hosts: qemu-system-ppc64: tcg/tcg.c:515: tcg_temp_new_internal: Assertion `ts->base_type == type' failed. This patch makes the free routine use the base_type instead for the free case, so it's consistent with the temporary allocation. It fixes the above failure for me. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1390146811-59936-1-git-send-email-agraf@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10tcg: Use bitmaps for free temporariesRichard Henderson
We previously allocated 32-bits per temp for the next_free_temp entry. We now allocate 4 bits per temp across the 4 bitmaps. Using a linked list meant that if a translator is tweeked, resulting in temps being freed in a different order, that would have follow-on effects throughout the TB. Always allocating the lowest free temp means that follow-on effects are minimized, which can make it easier to diff output when debugging the translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-ldst.hRichard Henderson
Move TCGLabelQemuLdst and related stuff out of tcg.h. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Merge tcg_register_helper into tcg_context_initRichard Henderson
Eliminates the repeated checks for having created the s->helpers hash table. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-runtime.c helpers to all_helpersRichard Henderson
For the few targets that actually use these, we'd not report them symbolicly in the tcg opcode logs. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Put target helper data into an array.Richard Henderson
One call inside of a loop to tcg_register_helper instead of hundreds of sequential calls. Presumably more icache and branch prediction friendly; resulting binary size mostly unchanged on x86_64, as we're trading 32-bit rip-relative references in .text for full 64-bit pointers in .rodata. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Use a GHashTable for tcg_find_helperRichard Henderson
Slightly changes the interface, in that we now return name instead of a TCGHelperInfo structure, which goes away. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Fix jit debug for x32Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Use appropriate types in tcg_reg_alloc_callRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Use uintptr_t in TCGHelperInfoRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change memory offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change frame pointer offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-26tcg-i386: Add and use tcg_out64Richard Henderson
No point in splitting the write into 32-bit pieces. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-26tcg: Tidy generated code for tcg_outNRichard Henderson
Aliasing was forcing s->code_ptr to be re-read after the store. Keep the pointer in a local variable to help the compiler. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg: Move the CIE and FDE header definitions to common codeRichard Henderson
These will necessarily be the same layout for all hosts. This limits the amount of boilerplate required to implement jit debug for a host. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-10 16:52:37 +0000