aboutsummaryrefslogtreecommitdiff
path: root/tcg/ppc
AgeCommit message (Collapse)Author
2019-10-14tcg/ppc: Update vector support for v2.07 VSXRichard Henderson
These new instructions are conditional only on MSR.VSX and are thus part of the VSX instruction set, and not Altivec. This includes double-word loads and stores. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Update vector support for v2.07 AltivecRichard Henderson
These new instructions are conditional only on MSR.VEC and are thus part of the Altivec instruction set, and not VSX. This includes lots of double-word arithmetic and a few extra logical operations. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Update vector support for VSXRichard Henderson
The VSX instruction set instructions include double-word loads and stores, double-word load and splat, double-word permute, and bit select. All of which require multiple operations in the Altivec instruction set. Because the VSX registers map %vsr32 to %vr0, and we have no current intention or need to use vector registers outside %vr0-%vr19, force on the {ax,bx,cx,tx} bits within the added VSX insns so that we don't have to otherwise modify the VR[TABC] macros. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Enable Altivec detectionRichard Henderson
Now that we have implemented the required tcg operations, we can enable detection of host vector support. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> (PPC32) Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Support vector dup2Richard Henderson
This is only used for 32-bit hosts. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Support vector multiplyRichard Henderson
For Altivec, this is always an expansion. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Support vector shift by immediateRichard Henderson
For Altivec, this is done via vector shift by vector, and loading the immediate into a register. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Add support for vector saturated add/subtractRichard Henderson
Add support for vector saturated add/subtract using Altivec instructions: VADDSBS, VADDSHS, VADDSWS, VADDUBS, VADDUHS, VADDUWS, and VSUBSBS, VSUBSHS, VSUBSWS, VSUBUBS, VSUBUHS, VSUBUWS. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Add support for vector add/subtractRichard Henderson
Add support for vector add/subtract using Altivec instructions: VADDUBM, VADDUHM, VADDUWM, VSUBUBM, VSUBUHM, VSUBUWM. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Add support for vector maximum/minimumRichard Henderson
Add support for vector maximum/minimum using Altivec instructions VMAXSB, VMAXSH, VMAXSW, VMAXUB, VMAXUH, VMAXUW, and VMINSB, VMINSH, VMINSW, VMINUB, VMINUH, VMINUW. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Add support for load/store/logic/comparisonRichard Henderson
Add various bits and peaces related mostly to load and store operations. In that context, logic, compare, and splat Altivec instructions are used, and, therefore, the support for emitting them is included in this patch too. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Enable tcg backend vector compilationRichard Henderson
Introduce all of the flags required to enable tcg backend vector support, and a runtime flag to indicate the host supports Altivec instructions. For now, do not actually set have_isa_altivec to true, because we have not yet added all of the code to actually generate all of the required insns. However, we must define these flags in order to disable ifndefs that create stub versions of the functions added here. The change to tcg_out_movi works around a buglet in tcg.c wherein if we do not define tcg_out_dupi_vec we get a declared but not defined Werror, but if we only declare it we get a defined but not used Werror. We need to this change to tcg_out_movi eventually anyway, so it's no biggie. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Replace HAVE_ISEL macro with a variableRichard Henderson
Previously we've been hard-coding knowledge that Power7 has ISEL, but it was an optional instruction before that. Use the AT_HWCAP2 bit, when present, to properly determine support. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Replace HAVE_ISA_2_06Richard Henderson
This is identical to have_isa_2_06, so replace it. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Create TCGPowerISA and have_isaRichard Henderson
Introduce an enum to hold base < 2.06 < 3.00. Use macros to preserve the existing have_isa_2_06 and have_isa_3_00 predicates. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-14tcg/ppc: Introduce macros VRT(), VRA(), VRB(), VRC()Richard Henderson
Introduce macros VRT(), VRA(), VRB(), VRC() used for encoding elements of Altivec instructions. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Introduce macro VX4()Richard Henderson
Introduce macro VX4() used for encoding Altivec instructions. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-10-14tcg/ppc: Introduce Altivec registersRichard Henderson
Altivec supports 32 128-bit vector registers, whose names are by convention v0 through v31. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-09-03tcg: TCGMemOp is now accelerator independent MemOpTony Nguyen
Preparation for collapsing the two byte swaps, adjust_endianness and handle_bswap, along the I/O path. Target dependant attributes are conditionalized upon NEED_CPU_H. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move the softmmu tlb to CPUNegativeOffsetStateRichard Henderson
We have for some time had code within the tcg backends to handle large positive offsets from env. This move makes sure that need not happen. Indeed, we are able to assert at build time that simple offsets suffice for all hosts. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Create struct CPUTLBRichard Henderson
Move all softmmu tlb data into this structure. Arrange the members so that we are able to place mask+table together and at a smaller absolute offset from ENV. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Return bool success from tcg_out_movRichard Henderson
This patch merely changes the interface, aborting on all failures, of which there are currently none. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg/ppc: Allow the constant pool to overflow at 32kRichard Henderson
There is no point in coding for a 2GB offset when the max TB size is already limited to 64k. If we further restrict to 32k then we can eliminate the extra ADDIS instruction. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg: Restart TB generation after out-of-line ldst overflowRichard Henderson
This is part c of relocation overflow handling. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg: Add INDEX_op_extract2_{i32,i64}Richard Henderson
This will let backends implement the double-word shift operation. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28cputlb: Remove static tlb sizingRichard Henderson
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB, remove the define and the old code. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg/ppc: enable dynamic TLB sizingRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: introduce dynamic TLB sizingEmilio G. Cota
Disabled in all TCG backends for now. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20190116170114.26802-3-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg: Add TCG_TARGET_HAS_MEMORY_BSWAPRichard Henderson
For now, defined universally as true, since we previously required backends to implement swapped memory operations. Future patches may now remove that support where it is onerous. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg/ppc: Return false on failure from patch_relocRichard Henderson
The reloc_pc{14,24}_val routines retain their asserts. Use these directly within the slow paths. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg: Return success from patch_relocRichard Henderson
This will move the assert for success from within (subroutines of) patch_reloc into the callers. It will also let new code do something different when a relocation is out of range. For the moment, all backends are trivially converted to return true. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg/ppc: Fold away "noaddr" branch routinesRichard Henderson
There is no longer a need for preserving branch offset operands, as we no longer re-translate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-15tcg: Reduce max TB opcode countRichard Henderson
Also, assert that we don't overflow any of two different offsets into the TB. Both unwind and goto_tb both record a uint16_t for later use. This fixes an arm-softmmu test case utilizing NEON in which there is a TB generated that runs to 7800 opcodes, and compiles to 96k on an x86_64 host. This overflows the 16-bit offset in which we record the goto_tb reset offset. Because of that overflow, we install a jump destination that goes to neverland. Boom. With this reduced op count, the same TB compiles to about 48k for aarch64, ppc64le, and x86_64 hosts, and neither assertion fires. Cc: qemu-stable@nongnu.org Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Allow a 32-bit offset to the constant poolRichard Henderson
We recently relaxed the limit of the number of opcodes that can appear in a TranslationBlock. In certain cases this has resulted in relocation overflow. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-16tcg/ppc: Support tlb offsets larger than 64kRichard Henderson
AArch64 with SVE has an offset of 80k to the 8th TLB. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg/ppc: Fully convert tcg_target_op_defRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_set32Richard Henderson
It's not even clear what the interface REG and VAL32 were supposed to mean. All uses had REG = 0 and VAL32 was the bitset assigned to the destination. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg: Remove tcg_regset_clearRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-17tcg/ppc: disable atomic write check on ppc32Philippe Mathieu-Daudé
This fixes building for ppc64 on ppc32 (changed in 5964fca8a12c): tcg/ppc/tcg-target.inc.c: In function 'tb_target_set_jmp_target': include/qemu/compiler.h:86:30: error: static assertion failed: \ "not expecting: sizeof(*(uint64_t *)jmp_addr) > ATOMIC_REG_SIZE" QEMU_BUILD_BUG_ON(sizeof(*ptr) > ATOMIC_REG_SIZE); \ ^ tcg/ppc/tcg-target.inc.c:1377:9: note: in expansion of macro 'atomic_set' atomic_set((uint64_t *)jmp_addr, pair); ^ Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170911204936.5020-1-f4bug@amsat.org> [rth: Added commentary requested by pmm.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg/ppc: Use constant pool for moviRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/ppc: Look for shifted constantsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg/ppc: Change TCG_REG_RA to TCG_REG_TBRichard Henderson
At this point the conversion is a wash. Loading of TB+ofs is smaller, but the actual return address from exit_tb is larger. There are a few more insns required to transition between TBs. But the expectation is that accesses to the constant pool will on the whole be smaller. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-05tcg: Add tcg target default memory orderingPranith Kumar
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Message-Id: <20170829063313.10237-3-bobby.prani@gmail.com> [rth: Dropped ia64 hunk] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-06-19util: add cacheinfoEmilio G. Cota
Add helpers to gather cache info from the host at init-time. For now, only export the host's I/D cache line sizes, which we will use to improve cache locality to avoid false sharing. Suggested-by: Richard Henderson <rth@twiddle.net> Suggested-by: Geert Martin Ijewski <gm.ijewski@web.de> Tested-by: Geert Martin Ijewski <gm.ijewski@web.de> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1496794624-4083-1-git-send-email-cota@braap.org> [rth: Move all implementations from tcg/ppc/] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg/ppc: Implement goto_ptrRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/ppc: Handle ctpop opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 06:44:05 +0000