aboutsummaryrefslogtreecommitdiff
path: root/tcg/mips
AgeCommit message (Collapse)Author
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-01tcg/mips: fix add2Aurelien Jarno
The add2 code in the tcg_out_addsub2 function doesn't take into account the case where rl == al == bl. In that case we can't compute the carry after the addition. As it corresponds to a multiplication by 2, the carry bit is the bit 31. While this is a corner case, this prevents x86-64 guests to boot on a MIPS host. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/mips: Mask TCGMemOp appropriately for indexingAurelien Jarno
Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition, but two cases were forgotten in the TCG MIPS backend. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-08-01tcg/mips: fix TLB loading for BE host with 32-bit guestsAurelien Jarno
For 32-bit guest, we load a 32-bit address from the TLB, so there is no need to compensate for the low or high part. This fixes 32-bit guests on big-endian hosts. Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-09tcg/mips: Fix build error from merged memop+mmu_idx parameterJames Hogan
Commit 3972ef6f830d ("tcg: Push merged memop+mmu_idx parameter to softmmu routines") caused the following build errors when building TCG for MIPS: In file included from tcg/tcg.c:258:0: tcg/mips/tcg-target.c In function ‘tcg_out_qemu_ld_slow_path’: tcg/mips/tcg-target.c:1015:22: error: ‘lb’ undeclared (first use in this function) tcg/mips/tcg-target.c In function ‘tcg_out_qemu_st_slow_path’: tcg/mips/tcg-target.c:1058:22: error: ‘lb’ undeclared (first use in this function) It looks like lb was meant to refer to the TCGLabelQemuLdst *l parameter, so fix both references to lb to refer to just l. Fixes: 3972ef6f830d ("tcg: Push merged memop+mmu_idx parameter to softmmu routines") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1436433435-24898-2-git-send-email-james.hogan@imgtec.com Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-09tcg: Mask TCGMemOp appropriately for indexingRichard Henderson
The addition of MO_AMASK means that places that used inverted masks need to be changed to use positive masks, and places that failed to mask the intended bits need updating. Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-11-02tcg/mips: fix store softmmu slow pathAurelien Jarno
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a regression at the same time by always calling tcg_out_tlb_load with is_load=1. This makes impossible to run any significant code under qemu-system-mips*. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-24Fix new typos (found by codespell)Stefan Weil
* accomodate -> accommodate * aquiring -> acquiring * beacuse -> because * loosing -> losing * prefering -> preferring * threshhold -> threshold Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Enable direct chaining of TBsRichard Henderson
Now that the code_gen_buffer is constrained to not cross 256mb regions, we are assured that we can use J to reach another TB. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify movcondRichard Henderson
Use the same table to fold comparisons as with setcond. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify brcond2Richard Henderson
Emitting a single branch instead of (up to) 3, using setcond2 to generate the composite compare. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Improve setcond eq/ne vs zerosRichard Henderson
The original code results in one too many insns per zero present in the input. And since comparing 64-bit numbers vs zero is common... Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify setcond2Richard Henderson
Using tcg_unsigned_cond and tcg_high_cond. Also, move the function up in the file for future cleanups. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify brcondRichard Henderson
Use the same table to fold comparisons as with setcond. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Simplify setcondRichard Henderson
Use a table to fold comparisons to less-than. Also, move the function up in the file for futher simplifications. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Commonize opcode implementationsRichard Henderson
Most opcodes fall in to one of a couple of patterns. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Improve add2/sub2Richard Henderson
Reduce insn count from 5 to either 3 or 4. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Hoist args loadsRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Fix subtract immediate rangeRichard Henderson
Since we must use ADDUI, we would generate incorrect code for -32768. Leaving off subtract of +32768 makes things easier for a follow-on patch. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Name the opcode enumerationRichard Henderson
And use it in the opcode emission functions. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use EXT for AND on mips32r2Richard Henderson
At the same time, tidy deposit by introducing tcg_out_opc_bf. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use T9 for TCG_TMP1Richard Henderson
T0 is an argument register for the n32 and n64 abis. T9 is the call address register for the abis, and is more directly under the control of the backend. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Introduce TCG_TMP0, TCG_TMP1Richard Henderson
Use these instead of hard-coding the registers to use for temporaries. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Rearrange register allocationRichard Henderson
Use FP (also known as S8) as a normal call-saved register. Include T0 in the allocation order and call-clobbered list even though it's currently used as a TCG temporary. Put the argument registers at the end of the allocation order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Convert to new_ldstRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Convert to new qemu_l/st helpersRichard Henderson
In addition, fill delay slots calling the helpers and tail call to the store helpers. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Move softmmu slow path out of lineRichard Henderson
At the same time, tidy up the call helpers, avoiding a memory reference. Split out several subroutines. Use TCGMemOp constants. Make endianness selectable at runtime. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Split large ldst offsetsRichard Henderson
Use this to reduce goto_tb by one insn. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Fill the exit_tb delay slotRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use J and JAL opcodesRichard Henderson
For userland builds calls will normally be in range, and for the exit_tb opcode the branch to the epilogue. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Remove unreachable code in tcg_out_op and op_defsRichard Henderson
The INDEX_op_call case has just been obsoleted; the mov and movi cases have not been reachable for years. Attempt to document this both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT. Because of the TCG_OPF_NOT_PRESENT change, this must be done for all targets in a single commit. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-mips: Split out tcg_out_callRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-mips: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson
And use tcg pointer differencing functions as appropriate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Relax requirement for mulu2_i32 on 32-bit hostsRichard Henderson
Instead require either mulu2_i32 or muluh_i32. The code in tcg-op.h already supports looking for both. Previous incomplete conversion? Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Add TCGType parameter to tcg_target_const_matchRichard Henderson
Most 64-bit targets need to be able to ignore the high bits of a TCG_TYPE_I32 value. Suggested-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-null.hRichard Henderson
This is a no-op backend data implementation, for those targets that are not currently using the load/store optimization path. This is prepatory to always requiring these functions in all backends. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-03Merge branch 'tcg-next' of git://github.com/rth7680/qemuAurelien Jarno
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits) tcg-i386: Make use of zero-extended memory helper routines tcg: Introduce zero and sign-extended versions of load helpers exec: Split softmmu_defs.h target: Include softmmu_exec.h where forgotten exec: Rename USUFFIX to LSUFFIX tcg-i386: Don't perform GETPC adjustment in TCG code exec: Reorganize the GETRA/GETPC macros configure: Allow x32 as a host tcg-i386: Adjust tcg_out_tlb_load for x32 tcg-i386: Use intptr_t appropriately tcg: Fix jit debug for x32 tcg: Use appropriate types in tcg_reg_alloc_call tcg: Change tcg_out_ld/st offset to intptr_t tcg: Change tcg_gen_exit_tb argument to uintptr_t tcg: Use uintptr_t in TCGHelperInfo tcg: Change relocation offsets to intptr_t tcg: Change memory offsets to intptr_t tcg: Change frame pointer offsets to intptr_t tcg: Define TCG_ptr properly tcg: Define TCG_TYPE_PTR properly ...
2013-09-03tcg/mips: only enable ext8s/ext16s ops on MIPS32R2Aurelien Jarno
On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: inline bswap16/bswap32 opsAurelien Jarno
Use an inline version for the bswap16 and bswap32 ops to avoid testing for MIPS32R2 instructions availability, as these ops are only available in that case. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: detect available host instructions at runtimeAurelien Jarno
Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 18:05:33 +0000