aboutsummaryrefslogtreecommitdiff
path: root/tcg/mips/tcg-target.h
AgeCommit message (Collapse)Author
2015-10-19tcg/mips: Support r6 multiply/divide encodingsJames Hogan
MIPSr6 adds several new integer multiply, divide, and modulo instructions, and removes several pre-r6 encodings, along with the HI/LO registers which were the implicit operands of some of those instructions. Update TCG to use the new instructions when built for r6. The new instructions actually map much more directly to the TCG ops, as they only provide a single 32-bit half of the result and in a normal general purpose register instead of HI or LO. The mulu2_i32 and muls2_i32 operations are no longer appropriate for r6, so they are removed from the TCG opcode table. This is because they would need to emit two separate host instructions anyway (for the high and low half of the result), which TCG can arrange automatically for us in the absense of mulu2_i32/muls2_i32 by splitting it into mul_i32 and mul*h_i32 TCG ops. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-6-git-send-email-james.hogan@imgtec.com>
2015-10-19tcg/mips: Add use_mips32r6_instructions definitionJames Hogan
Add definition use_mips32r6_instructions to the MIPS TCG backend which is constant 1 when built for MIPS release 6. This will be used to decide between pre-R6 and R6 instruction encodings. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1443788657-14537-4-git-send-email-james.hogan@imgtec.com>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Use EXT for AND on mips32r2Richard Henderson
At the same time, tidy deposit by introducing tcg_out_opc_bf. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Rearrange register allocationRichard Henderson
Use FP (also known as S8) as a normal call-saved register. Include T0 in the allocation order and call-clobbered list even though it's currently used as a TCG temporary. Put the argument registers at the end of the allocation order. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24tcg-mips: Convert to new_ldstRichard Henderson
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-mips: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson
And use tcg pointer differencing functions as appropriate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Relax requirement for mulu2_i32 on 32-bit hostsRichard Henderson
Instead require either mulu2_i32 or muluh_i32. The code in tcg-op.h already supports looking for both. Previous incomplete conversion? Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-03Merge branch 'tcg-next' of git://github.com/rth7680/qemuAurelien Jarno
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits) tcg-i386: Make use of zero-extended memory helper routines tcg: Introduce zero and sign-extended versions of load helpers exec: Split softmmu_defs.h target: Include softmmu_exec.h where forgotten exec: Rename USUFFIX to LSUFFIX tcg-i386: Don't perform GETPC adjustment in TCG code exec: Reorganize the GETRA/GETPC macros configure: Allow x32 as a host tcg-i386: Adjust tcg_out_tlb_load for x32 tcg-i386: Use intptr_t appropriately tcg: Fix jit debug for x32 tcg: Use appropriate types in tcg_reg_alloc_call tcg: Change tcg_out_ld/st offset to intptr_t tcg: Change tcg_gen_exit_tb argument to uintptr_t tcg: Use uintptr_t in TCGHelperInfo tcg: Change relocation offsets to intptr_t tcg: Change memory offsets to intptr_t tcg: Change frame pointer offsets to intptr_t tcg: Define TCG_ptr properly tcg: Define TCG_TYPE_PTR properly ...
2013-09-03tcg/mips: only enable ext8s/ext16s ops on MIPS32R2Aurelien Jarno
On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: detect available host instructions at runtimeAurelien Jarno
Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-mips: Implement mulsh, muluhRichard Henderson
With the optimization in tcg_liveness_analysis, we can avoid the MFLO when it is unused. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg: Split rem requirement from div requirementRichard Henderson
There are several hosts with only a "div" insn. Remainder is computed manually from the quotient and inputs. We can do this generically. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-01tcg/mips: Implement muls2_i32Aurelien Jarno
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23tcg: Add signed multiword multiplication operationsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19janitor: add guards to headersPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-12tcg: Remove TCG_TARGET_HAS_GUEST_BASE definePeter Maydell
GUEST_BASE support is now supported by all TCG backends, and is now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE define (set by every backend) and the error if it is unset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-09-26tcg/mips: fix MIPS32(R2) detectionAurelien Jarno
Fix the MIPS32(R2) cpu detection so that it also works with -march=octeon. Thanks to Andrew Pinski for the hint. Cc: Andrew Pinski <apinski@cavium.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement movcond op on MIPS32R2Aurelien Jarno
movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement deposit op on MIPS32R2Aurelien Jarno
deposit operations can be optimized on MIPS32 Release 2 using the INS instruction. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement rotl/rotr ops on MIPS32R2Aurelien Jarno
rotr operations can be optimized on MIPS32 Release 2 using the ROTR and ROTRV instructions. Also implemented rotl operations by subtracting the shift from 32. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: optimize bswap{16,16s,32} on MIPS32R2Aurelien Jarno
bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg: Introduce movcondRichard Henderson
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-03-03w64: Change data type of parameters for flush_icache_rangeStefan Weil
The TCG targets i386 and tci needed a change of the function prototype for w64. This change is currently not needed for the other TCG targets, but it can be applied to avoid code differences. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-11-14tcg: Standardize on TCGReg as the enum for hard registersRichard Henderson
Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-01tcg: Don't declare TCG_TARGET_REG_BITS in tcg-target.hStefan Weil
It is now declared for all tcg targets in tcg.h, so the tcg target specific declarations are redundant. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21tcg: Always define all of the TCGOpcode enum members.Richard Henderson
By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-03Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD.Brad
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-14tcp/mips: Change TCG_AREG0 (fp -> s0)Stefan Weil
Register fp (frame pointer) is a bad choice for compilations without optimisation, because the compiler makes heavy use of this register (so the resulting code crashes). Register s0 had been used for TCG_AREG1 in earlier releases, but was no longer used and is now free for TCG_AREG0. The resulting code works for compilations without optimisation (tested with qemu mips in qemu mips on x86 host). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05tcg/mips: use seb/seh instructions on MIPS32R2Aurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27tcg-mips: add guest base supportAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27tcg-mips: implement norAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of NOR.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of NAND.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Allow target-specific implementation of EQV.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26remove remaining occurrences AREG[1-9] and TCG_AREG[1-9]Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-20tcg: Add comments for all optional instructions not implemented.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-01tcg: initial mips supportAurelien Jarno
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 15:55:35 +0000