aboutsummaryrefslogtreecommitdiff
path: root/tcg/i386
AgeCommit message (Collapse)Author
2013-02-23tcg-i386: Implement multiword arithmetic opsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Add signed multiword multiplication operationsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Add 64-bit multiword arithmetic operationsRichard Henderson
Matching the 32-bit multiword arithmetic that we already have. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg-i386: Always implement 32-bit multiword opsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Make 32-bit multiword operations optional for 64-bit hostsRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-12tcg-i386: use LEA for 3-operand 64-bit additionPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29tcg-i386: Perform cmov detection at runtime for 32-bit.Richard Henderson
Existing compile-time detection is spotty at best. Convert it all to runtime detection instead. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: add guards to headersPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-03tcg: Optimize qemu_ld/st by generating slow paths at the end of a blockYeongkyoon Lee
Add optimized TCG qemu_ld/st generation which locates the code of TLB miss cases at the end of a block after generating the other IRs. Currently, this optimization supports only i386 and x86_64 hosts. Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-28tcg-i386: Use %gs prefixes for x86_64 GUEST_BASERichard Henderson
When we allocate a reserved_va for the guest, the kernel will likely choose an address well above 4G. At which point we must use a pair of movabsq+addq to form the host address. If we have OS support, set up a segment register to point to guest_base instead. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-28tcg/i386: remove ld/st third argument register constraintAurelien Jarno
On x86_64, remove the constraint on the third argument register which is not needed: - For loads the helper arguments are env, addr, mem_idx. The addr value should not be in the two first argument registers as they are used in tcg_out_tlb_load(). - For stores the helper arguments are env, addr, data, mem_idx. The addr and data values should not be in the two first argument registers as they are used in tcg_out_tlb_load(). The data value should also not be in the two first argument registers, but could be in the third argument register in which case it would be already loaded at the right location. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-28tcg/i386: remove suboptimal register shiftingAurelien Jarno
Now that CONFIG_TCG_PASS_AREG0 has been removed, it's easier to get an optimal code for the load/store functions. First swap the two registers used in tcg_out_tlb_load() so that the address end-up in the second register instead of the first one. Adjust tcg_out_qemu_ld() and tcg_out_qemu_st() to respectively call tcg_out_qemu_ld_direct() and tcg_out_qemu_st_direct() with the correct registers. Then replace the register shifting by direct load of the arguments. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-12tcg: Remove TCG_TARGET_HAS_GUEST_BASE definePeter Maydell
GUEST_BASE support is now supported by all TCG backends, and is now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE define (set by every backend) and the error if it is unset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-06tcg: Add TCG_COND_NEVER, TCG_COND_ALWAYSRichard Henderson
There are several cases that can be handled easier inside both translators and code generators if we have out-of-band values for conditions. It's easy enough to handle ALWAYS and NEVER in the natural way inside the tcg middle-end. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-06tcg: remove obsolete jmp opAurelien Jarno
The TCG jmp operation doesn't really make sense in the QEMU context, it is unused, it is not implemented by some targets, and it is wrongly implemented by some others. This patch simply removes it. Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Stefan Weil<sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg/i386: fix build with -march < i686Aurelien Jarno
The movcond_i32 op has to be protected with TCG_TARGET_HAS_movcond_i32 to fix the build with -march < i686. Thanks to Richard Henderson for the hint. Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg: Remove tcg_target_get_call_iarg_regs_countStefan Weil
The TCG targets no longer need individual implementations. Since commit 6a18ae2d2947532d5c26439548afa0481c4529f9, 'flags' is no longer used in tcg_target_get_call_iarg_regs_count. The remaining tcg_target_get_call_iarg_regs_count is trivial and only called once. Therefore the patch eliminates it completely. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/i386: Remove unused registers from tcg_target_call_iarg_regsStefan Weil
32 bit x86 hosts don't need registers for helper function arguments because they use the default stack based calling convention. Removing the registers allows simpler code for function tcg_target_get_call_iarg_regs_count. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/i386: Add shortcuts for registers used in L constraintStefan Weil
While 64 bit hosts use the first three registers which are also used as function input parameters, 32 bit hosts use TCG_REG_EAX and TCG_REG_EDX which are not used in parameter passing. After defining new register macros for the registers used in L constraint, the patch replaces most occurrences of tcg_target_call_iarg_regs[0], tcg_target_call_iarg_regs[1] and tcg_target_call_iarg_regs[2] by those new macros. tcg_target_call_iarg_regs remains unchanged when it is used for input arguments (only with 64 bit hosts) before tcg_out_calli. A comment related to those registers was fixed, too. Signed-off-by: Stefan Weil <sw@weilnetz.de> [aurel32: build fix on i386, small optimization for i386 in the prologue] Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22w64: Fix TCG helper functions with 5 argumentsStefan Weil
TCG uses 6 registers for function arguments on 64 bit Linux hosts, but only 4 registers on W64 hosts. Commit 2999a0b20074a7e4a58f56572bb1436749368f59 increased the number of arguments for some important helper functions from 4 to 5 which triggered a bug for W64 hosts: QEMU aborts when executing helper_lcall_real in the guest's BIOS because function tcg_target_get_call_iarg_regs_count always returned 6. As W64 has only 4 registers for arguments, the 5th argument must be passed on the stack using a correct stack offset. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg-i386: Implement movcondRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg: Introduce movcondRichard Henderson
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-19tcg/i386: allow constants in load/store opsAurelien Jarno
On x86, it is possible to move a constant value to memory. Add code to handle a constant argument to load/store ops. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-04-15tcg/i386: Add support for w64 ABIStefan Weil
w64 uses the registers rcx, rdx, r8 and r9 for function arguments, so it needs a different declaration of tcg_target_call_iarg_regs. rax, rcx, rdx, r8, r9, r10 and r11 may be changed by function calls. rbx, rbp, rdi, rsi, r12, r13, r14 and r15 remain unchanged by function calls. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-15tcg/i386: Use GDB JIT debugging interface only for hosts with ELFStefan Weil
Not all i386 / x86_64 hosts use ELF. Ask the compiler whether ELF is used. On w64, gdb crashes when ELF_HOST_MACHINE is defined. Cc: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-03-24tcg: Use the GDB JIT debugging interface.Richard Henderson
This allows us to generate unwind info for the dynamicly generated code in the code_gen_buffer. Only i386 is converted at this point. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18softmmu templates: optionally pass CPUState to memory access functionsBlue Swirl
Optionally, make memory access helpers take a parameter for CPUState instead of relying on global env. On most targets, perform simple moves to reorder registers. On i386, switch from regparm(3) calling convention to standard stack-based version. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18i386: Remove REGPARMBlue Swirl
Use stack based calling convention (GCC default) for interfacing with generated code instead of register based convention (regparm(3)). Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-11tcg: Improve tcg_out_label and fix its usage for w64Stefan Weil
tcg_out_label is always called with a third argument of pointer type which was casted to tcg_target_long. These casts can be avoided by changing the prototype of tcg_out_label. There was also a cast to long. For most hosts with sizeof(long) == sizeof(tcg_target_long) == sizeof(void *) this did not matter, but for w64 it was wrong. This is fixed now. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-03w64: Fix data type of parameters for flush_icache_rangeStefan Weil
flush_icache_range takes two address parameters which must be large enough to address any address of the host. For hosts with sizeof(unsigned long) == sizeof(void *), this patch changes nothing. All currently supported hosts fall into this category. For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8, so the use of tcg_target_ulong is needed for i386 and tci (the tcg targets which work with w64). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-09tcg: Remove redundant declarations of TCG_TARGET_REG_BITSStefan Weil
TCG_TARGET_REG_BITS is declared in tcg.h for all TCG targets. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-14tcg: Use TCGReg for standard tcg-target entry points.Richard Henderson
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14tcg: Standardize on TCGReg as the enum for hard registersRichard Henderson
Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-01tcg-i386: Introduce limited deposit supportJan Kiszka
x86 cannot provide an optimized generic deposit implementation. But at least for a few special cases, namely for writing bits 0..7, 8..15, and 0..15, versions using only a single instruction are feasible. Introducing such limited support improves emulating 16-bit x86 code on x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or words. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17tcg/i386: Only one call output register needed for 64 bit hostsStefan Weil
The second register is only needed for 32 bit hosts. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21tcg: Always define all of the TCGOpcode enum members.Richard Henderson
By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG/x86: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26TCG/x86: use TCG_REG_CALL_STACK instead of TCG_REG_ESPBlue Swirl
Except for specific cases where the use of %esp changes the encoding of the instruction, it's cleaner to use TCG_REG_CALL_STACK instead of TCG_REG_ESP. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Delegate setup of TCG temporaries to targetsBlue Swirl
Delegate TCG temp_buf setup to targets, so that they can use a stack frame later instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu-exec.c: avoid AREG0 useBlue Swirl
Make functions take a parameter for CPUState instead of relying on global env. Pass CPUState pointer to TCG prologue, which moves it to AREG0. Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue change. Revert the hacks to avoid AREG0 use on Sparc hosts. Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. Compile the file without HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-10tcg-i386: fix andi r, r, 0xffAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10tcg-i386: remove use of _Bool that slipped code reviewAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-10tcg-i386: Merge 64-bit generation.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: Make some tcg-target.c routines static.Richard Henderson
Both tcg_target_init and tcg_target_qemu_prologue are unused outside of tcg.c. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: Add TYPE parameter to tcg_out_mov.Richard Henderson
Mirror tcg_out_movi in having a TYPE parameter. This allows x86_64 to perform the move at the proper width, which may elide a REX prefix. Introduce a TCG_TYPE_REG enumerator to represent the "native width" of the host register, and to distinguish the usage from "pointer data" as represented by the existing TCG_TYPE_PTR. Update all targets to match. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-03tcg-i386: fix a typoAurelien Jarno
Fix a typo introduced by c28b14c694d759f39fe3ae4f8d03b567da5b93f8. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-02tcg-i386: declare tcg_out_tlb_load() inlineAurelien Jarno
Declare tcg_out_tlb_load() inline so that we don't loose optimisations with commit 8516a04467cb7954cdc32e8b79b4b7df56dccb16. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 08:41:37 +0000