aboutsummaryrefslogtreecommitdiff
path: root/tcg/i386/tcg-target.h
AgeCommit message (Collapse)Author
2021-01-07tcg: Remove TCG_TARGET_SUPPORT_MIRRORRichard Henderson
Now that all native tcg hosts support splitwx, remove the define. Replace the one use with a test for CONFIG_TCG_INTERPRETER. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg/i386: Support split-wx code generationRichard Henderson
Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Add --accel tcg,split-wx propertyRichard Henderson
Plumb the value through to alloc_code_gen_buffer. This is not supported by any os or tcg backend, so for now enabling it will result in an error. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Adjust tb_target_set_jmp_target for split-wxRichard Henderson
Pass both rx and rw addresses to tb_target_set_jmp_target. Reviewed-by: Joelle van Dyne <j@getutm.app> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg: Introduce INDEX_op_qemu_st8_i32Richard Henderson
Enable this on i386 to restrict the set of input registers for an 8-bit store, as required by the architecture. This removes the last use of scratch registers for user-only mode. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-07tcg/i386: Adjust TCG_TARGET_HAS_MEMORY_BSWAPRichard Henderson
Always true when movbe is available, otherwise leave this to generic code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-02util: Extract flush_icache_range to cacheflush.cRichard Henderson
This has been a tcg-specific function, but is also in use by hardware accelerators via physmem.c. This can cause link errors when tcg is disabled. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-08tcg: Remove TCG_TARGET_HAS_cmp_vecRichard Henderson
The cmp_vec opcode is mandatory; this symbol is unused. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-06-02tcg: Implement gvec support for rotate by scalarRichard Henderson
No host backend support yet, but the interfaces for rotls are in place. Only implement left-rotate for now, as the only known use of vector rotate by scalar is s390x, so any right-rotate would be unused and untestable. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-02tcg: Implement gvec support for rotate by vectorRichard Henderson
No host backend support yet, but the interfaces for rotlv and rotrv are in place. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v3: Drop the generic expansion from rot to shift; we can do better for each backend, and then this code becomes unused.
2020-06-02tcg: Implement gvec support for rotate by immediateRichard Henderson
No host backend support yet, but the interfaces for rotli are in place. Canonicalize immediate rotate to the left, based on a survey of architectures, but provide both left and right shift interfaces to the translators. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15tcg: Search includes from the project root source directoryPhilippe Mathieu-Daudé
We currently search both the root and the tcg/ directories for tcg files: $ git grep '#include "tcg/' | wc -l 28 $ git grep '#include "tcg[^/]' | wc -l 94 To simplify the preprocessor search path, unify by expliciting the tcg/ directory. Patch created mechanically by running: $ for x in \ tcg.h tcg-mo.h tcg-op.h tcg-opc.h \ tcg-op-gvec.h tcg-gvec-desc.h; do \ sed -i "s,#include \"$x\",#include \"tcg/$x\"," \ $(git grep -l "#include \"$x\""); \ done Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200101112303.20724-2-philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Support vector comparison select valueRichard Henderson
We already had backend support for this feature. Expand the new cmpsel opcode using vpblendb. The combination allows us to avoid an extra NOT for some comparison codes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector compare selectRichard Henderson
Perform a per-element conditional move. This combination operation is easier to implement on some host vector units than plain cmp+bitsel. Omit the usual gvec interface, as this is intended to be used by target-specific gvec expansion call-backs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector bitwise selectRichard Henderson
This operation performs d = (b & a) | (c & ~a), and is present on a majority of host vector units. Include gvec expanders. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector absolute valueRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add support for vector absolute valueRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector scalar shift opcodesRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector variable shift opcodesRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg/i386: Support INDEX_op_extract2_{i32,i64}Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24tcg: Add INDEX_op_extract2_{i32,i64}Richard Henderson
This will let backends implement the double-word shift operation. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28cputlb: Remove static tlb sizingRichard Henderson
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB, remove the define and the old code. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg/i386: enable dynamic TLB sizingEmilio G. Cota
As the following experiments show, this series is a net perf gain, particularly for memory-heavy workloads. Experiments are run on an Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz. 1. System boot + shudown, debian aarch64: - Before (v3.1.0): Performance counter stats for './die.sh v3.1.0' (10 runs): 9019.797015 task-clock (msec) # 0.993 CPUs utilized ( +- 0.23% ) 29,910,312,379 cycles # 3.316 GHz ( +- 0.14% ) 54,699,252,014 instructions # 1.83 insn per cycle ( +- 0.08% ) 10,061,951,686 branches # 1115.541 M/sec ( +- 0.08% ) 172,966,530 branch-misses # 1.72% of all branches ( +- 0.07% ) 9.084039051 seconds time elapsed ( +- 0.23% ) - After: Performance counter stats for './die.sh tlb-dyn-v5' (10 runs): 8624.084842 task-clock (msec) # 0.993 CPUs utilized ( +- 0.23% ) 28,556,123,404 cycles # 3.311 GHz ( +- 0.13% ) 51,755,089,512 instructions # 1.81 insn per cycle ( +- 0.05% ) 9,526,513,946 branches # 1104.641 M/sec ( +- 0.05% ) 166,578,509 branch-misses # 1.75% of all branches ( +- 0.19% ) 8.680540350 seconds time elapsed ( +- 0.24% ) That is, a 4.4% perf increase. 2. System boot + shutdown, ubuntu 18.04 x86_64: - Before (v3.1.0): 56100.574751 task-clock (msec) # 1.016 CPUs utilized ( +- 4.81% ) 200,745,466,128 cycles # 3.578 GHz ( +- 5.24% ) 431,949,100,608 instructions # 2.15 insn per cycle ( +- 5.65% ) 77,502,383,330 branches # 1381.490 M/sec ( +- 6.18% ) 844,681,191 branch-misses # 1.09% of all branches ( +- 3.82% ) 55.221556378 seconds time elapsed ( +- 5.01% ) - After: 56603.419540 task-clock (msec) # 1.019 CPUs utilized ( +- 10.19% ) 202,217,930,479 cycles # 3.573 GHz ( +- 10.69% ) 439,336,291,626 instructions # 2.17 insn per cycle ( +- 14.14% ) 80,538,357,447 branches # 1422.853 M/sec ( +- 16.09% ) 776,321,622 branch-misses # 0.96% of all branches ( +- 3.77% ) 55.549661409 seconds time elapsed ( +- 10.44% ) No improvement (within noise range). Note that for this workload, increasing the time window too much can lead to perf degradation, since it flushes the TLB *very* frequently. 3. x86_64 SPEC06int: x86_64-softmmu speedup vs. v3.1.0 for SPEC06int (test set) Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake) 5.5 +------------------------------------------------------------------------+ | +-+ | 5 |-+.................+-+...............................tlb-dyn-v5.......+-| | * * | 4.5 |-+.................*.*................................................+-| | * * | 4 |-+.................*.*................................................+-| | * * | 3.5 |-+.................*.*................................................+-| | * * | 3 |-+......+-+*.......*.*................................................+-| | * * * * | 2.5 |-+......*..*.......*.*.................................+-+*...........+-| | * * * * * * | 2 |-+......*..*.......*.*.................................*..*...........+-| | * * * * * * +-+ | 1.5 |-+......*..*.......*.*.................................*..*.*+-+.*+-+.+-| | * * *+-+ * * +-+ *+-+ +-+ +-+ * * * * * * | 1 |++++-+*+*++*+*++*++*+*++*+*+++-+*+*+-++*+-++++-++++-+++*++*+*++*+*++*+++| | * * * * * * * * * * * * * * * * * * * * * * * * * * | 0.5 +------------------------------------------------------------------------+ 400.perlb401.bzip403.g429445.g456.hm462.libq464.h471.omn47483.xalancbgeomean png: https://imgur.com/YRF90f7 That is, a 1.51x average speedup over the baseline, with a max speedup of 5.17x. Here's a different look at the SPEC06int results, using KVM as the baseline: x86_64-softmmu slowdown vs. KVM for SPEC06int (test set) Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake) 25 +---------------------------------------------------------------------------+ | +-+ +-+ | | * * +-+ v3.1.0 | | * * +-+ tlb-dyn-v5 | | * * * * +-+ | 20 |-+.................*.*.............................*.+-+......*.*........+-| | * * * # # * * | | +-+ * * * # # * * | | * * * * * # # * * | 15 |-+......*.*........*.*.............................*.#.#......*.+-+......+-| | * * * * * # # * #|# | | * * * * +-+ * # # * +-+ | | * * +-+ * * ++-+ +-+ * # # * # # +-+ | | * * +-+ * * * ## *| +-+ * # # * # # +-+ | 10 |-+......*.*..*.+-+.*.*........*.##.......++-+.*.+-+*.#.#......*.#.#.*.*..+-| | * * * +-+ * * * ## +-+ *# # * # #* # # +-+ * # # * * | | * * * # # * * +-+ * ## * +-+ *# # * # #* # # * * * # # *+-+ | | * * * # # * * * +-+ * ## * # # *# # * # #* # # * * * # # * ## | 5 |-+......*.+-+*.#.#.*.*..*.#.#.*.##.*.#.#.*#.#.*.#.#*.#.#.*.*..*.#.#.*.##.+-| | * # #* # # * +-+* # # * ## * # # *# # * # #* # # * * * # # * ## | | * # #* # # * # #* # # * ## * # # *# # * # #* # # * +-+* # # * ## | | ++-+ * # #* # # * # #* # # * ## * # # *# # * # #* # # * # #* # # * ## | |+++*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+*+#+#+*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+++| 0 +---------------------------------------------------------------------------+ 400.perlbe401.bzi403.gc429445.go456.h462.libqu464.h471.omne4483.xalancbmgeomean png: https://imgur.com/YzAMNEV After this series, we bring down the average SPEC06int slowdown vs KVM from 11.47x to 7.58x. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20190116170114.26802-4-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: introduce dynamic TLB sizingEmilio G. Cota
Disabled in all TCG backends for now. Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20190116170114.26802-3-cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg/i386: Implement vector minmax arithmeticRichard Henderson
The avx instruction set does not directly provide MO_64. We can still implement 64-bit with comparison and vpblendvb. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg/i386: Implement vector saturating arithmeticRichard Henderson
Only MO_8 and MO_16 are implemented, since that's all the instruction set provides. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: Add opcodes for vector minmax arithmeticRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28tcg: Add opcodes for vector saturated arithmeticRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg: Add TCG_TARGET_HAS_MEMORY_BSWAPRichard Henderson
For now, defined universally as true, since we previously required backends to implement swapped memory operations. Future patches may now remove that support where it is onerous. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guestsRichard Henderson
This preserves the invariant that all TCG_TYPE_I32 values are zero-extended in the 64-bit host register. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg/i386: Move TCG_REG_CALL_STACK from define to enumRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17tcg/i386: Always use %ebp for TCG_AREG0Richard Henderson
For x86_64, this can remove a REX prefix resulting in smaller code when manipulating globals of type i32, as we move them between backing store via cpu_env, aka TCG_AREG0. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-08tcg/i386: Add vector operationsRichard Henderson
The x86 vector instruction set is extremely irregular. With newer editions, Intel has filled in some of the blanks. However, we don't get many 64-bit operations until SSE4.2, introduced in 2009. The subsequent edition was for AVX1, introduced in 2011, which added three-operand addressing, and adjusts how all instructions should be encoded. Given the relatively narrow 2 year window between possible to support and desirable to support, and to vastly simplify code maintainence, I am only planning to support AVX1 and later cpus. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-07tcg/i386: Store out-of-range call targets in constant poolRichard Henderson
Already it saves 2 bytes per call, but also the constant pool entry may well be shared across multiple calls. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Rearrange ldst label trackingRichard Henderson
Dispense with TCGBackendData, as it has never been used for more than holding a single pointer. Use a define in the cpu/tcg-target.h to signal requirement for TCGLabelQemuLdst, so that we can drop the no-op tcg-be-null.h stubs. Rename tcg-be-ldst.h to tcg-ldst.inc.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-09-07tcg: Move USE_DIRECT_JUMP discriminator to tcg/cpu/tcg-target.hRichard Henderson
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional function tb_target_set_jmp_target. While we're touching all backends, add a parameter for tb->tc_ptr; we're going to need it shortly for some backends. Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c. This opens the possibility for TCG_TARGET_HAS_direct_jump to be a runtime decision -- based on host cpu capabilities, the size of code_gen_buffer, or a future debugging switch. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg/i386: implement goto_ptrEmilio G. Cota
Suggested-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-6-git-send-email-cota@braap.org> [rth: Reuse goto_ptr epilogue for exit_tb 0.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05tcg: Introduce goto_ptr opcode and tcg_gen_lookup_and_goto_ptrEmilio G. Cota
Instead of exporting goto_ptr directly to TCG frontends, export tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer returned by the lookup_tb_ptr() helper. This is the only use case we have for goto_ptr and lookup_tb_ptr, so having this function is very convenient. Furthermore, it trivially allows us to avoid calling the lookup helper if goto_ptr is not implemented by the backend. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org> Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org> [rth: Squashed 4 related commits.] Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-24tcg: enable MTTCG by default for ARM on x86 hostsAlex Bennée
This enables the multi-threaded system emulation by default for ARMv7 and ARMv8 guests using the x86_64 TCG backend. This is because on the guest side: - The ARM translate.c/translate-64.c have been converted to - use MTTCG safe atomic primitives - emit the appropriate barrier ops - The ARM machine has been updated to - hold the BQL when modifying shared cross-vCPU state - defer powerctl changes to async safe work All the host backends support the barrier and atomic primitives but need to provide same-or-better support for normal load/store operations. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-01-10tcg/i386: Handle ctpop opcodeRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add opcode for ctpopRichard Henderson
The number of actual invocations of ctpop itself does not warrent an opcode, but it is very helpful for POWER7 to use in generating an expansion for ctz. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/i386: Handle ctz and clz opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add clz and ctz opcodesRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg/i386: Implement field extraction opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10tcg: Add field extraction primitivesRichard Henderson
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of fixed position bitfields, much like we already have for deposit. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: rename trunc_shr_i32 into trunc_shr_i64_i32Aurelien Jarno
The op is sometimes named trunc_shr_i32 and sometimes trunc_shr_i64_i32, and the name in the README doesn't match the name offered to the frontends. Always use the long name to make it clear it is a size changing op. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 08:13:42 +0000