aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2019-06-03i386: Enable IA32_MISC_ENABLE MWAIT bit when exposing mwait/monitorWanpeng Li
The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR IA32_MISC_ENABLE MWAIT bit and as userspace has control of them both, it is userspace's job to configure both bits to match on the initial setup. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1557813999-9175-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-01target/mips: Improve performance of certain MSA instructionsMateja Marjanovic
Eliminate loops for better performance. Following MSA instructions from "UNOP" group are affected: - NLZC.<B|H|W|D> - NLOC.<B|H|W|D> - PCNT.<B|H|W|D> Following MSA instructions from "BINOP" group are affected: - ADD_A.<B|H|W|D> - ADDS_A.<B|H|W|D> - ADDS_S.<B|H|W|D> - ADDS_U.<B|H|W|D> - ADDV.<B|H|W|D> - ASUB_S.<B|H|W|D> - ASUB_U.<B|H|W|D> - AVE_S.<B|H|W|D> - AVE_U.<B|H|W|D> - AVER_S.<B|H|W|D> - AVER_U.<B|H|W|D> - BCLR.<B|H|W|D> - BNEG.<B|H|W|D> - BSET.<B|H|W|D> - CEQ.<B|H|W|D> - CLE_S.<B|H|W|D> - CLE_U.<B|H|W|D> - CLT_S.<B|H|W|D> - CLT_U.<B|H|W|D> - DIV_S.<B|H|W|D> - DIV_U.<B|H|W|D> - DOTP_S.<B|H|W|D> - DOTP_U.<B|H|W|D> - HADD_S.<B|H|W|D> - HADD_U.<B|H|W|D> - HSUB_S.<B|H|W|D> - HSUB_U.<B|H|W|D> - MAX_A.<B|H|W|D> - MAX_S.<B|H|W|D> - MAX_U.<B|H|W|D> - MIN_A.<B|H|W|D> - MIN_S.<B|H|W|D> - MIN_U.<B|H|W|D> - MOD_S.<B|H|W|D> - MOD_U.<B|H|W|D> - MUL_Q.<B|H|W|D> - MULR_Q.<B|H|W|D> - MULV.<B|H|W|D> - SLL.<B|H|W|D> - SRA.<B|H|W|D> - SRAR.<B|H|W|D> - SRL.<B|H|W|D> - SRLR.<B|H|W|D> - SUBS_S.<B|H|W|D> - SUBS_U.<B|H|W|D> - SUBSUS_U.<B|H|W|D> - SUBSUU_S.<B|H|W|D> - SUBV.<B|H|W|D> Following MSA instructions from "TEROP" group are affected: - BINSL.<B|H|W|D> - BINSR.<B|H|W|D> - DPADD_S.<B|H|W|D> - DPADD_U.<B|H|W|D> - DPSUB_S.<B|H|W|D> - DPSUB_U.<B|H|W|D> - MADD_Q.<B|H|W|D> - MADDR_Q.<B|H|W|D> - MADDV.<B|H|W|D> - MSUB_Q.<B|H|W|D> - MSUBR_Q.<B|H|W|D> - MSUBV.<B|H|W|D> Additionally, following MSA instructionas are also affected: - ILVL.<B|H|W|D> - ILVR.<B|H|W|D> - ILVEV.<B|H|W|D> - ILVOD.<B|H|W|D> - PCKEV.<B|H|W|D> - PCKOD.<B|H|W|D> Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1551718283-4487-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01target/mips: Clean up lmi_helper.cAleksandar Markovic
Remove several minor checkpatch warnings and errors. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01target/mips: Clean up dsp_helper.cAleksandar Markovic
Remove several minor checkpatch warnings and errors. Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>
2019-06-01target/mips: Add emulation of MMI instruction PCPYUDMateja Marjanovic
Add emulation of MMI instruction PCPYUD. The emulation is implemented using TCG front end operations directly to achieve better performance. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01target/mips: Add emulation of MMI instruction PCPYLDMateja Marjanovic
Add emulation of MMI instruction PCPYLD. The emulation is implemented using TCG front end operations directly to achieve better performance. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-06-01target/mips: Add emulation of MMI instruction PCPYHMateja Marjanovic
Add emulation of MMI instruction PCPYH. The emulation is implemented using TCG front end operations directly to achieve better performance. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-29spapr/xive: add KVM supportCédric Le Goater
This introduces a set of helpers when KVM is in use, which create the KVM XIVE device, initialize the interrupt sources at a KVM level and connect the interrupt presenters to the vCPU. They also handle the initialization of the TIMA and the source ESB memory regions of the controller. These have a different type under KVM. They are 'ram device' memory mappings, similarly to VFIO, exposed to the guest and the associated VMAs on the host are populated dynamically with the appropriate pages using a fault handler. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190513084245.25755-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Use vector variable shifts for VSL, VSR, VSRARichard Henderson
The gvec expanders take care of masking the shift amount against the element width. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190518191430.21686-2-richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix xvabs[sd]p, xvnabs[sd]p, xvneg[sd]p, xvcpsgn[sd]pAnton Blanchard
We were using set_cpu_vsr*() when we should have used get_cpu_vsr*(). Fixes: 8b3b2d75c7c0 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190509104912.6b754dff@kryten> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Optimise VSX_LOAD_SCALAR_DS and VSX_VECTOR_LOAD_STOREAnton Blanchard
A few small optimisations: In VSX_LOAD_SCALAR_DS() we can don't need to read the VSR via get_cpu_vsrh(). Split VSX_VECTOR_LOAD_STORE() into two functions. Loads only need to write the VSRs (set_cpu_vsr*()) and stores only need to read the VSRs (get_cpu_vsr*()) Thanks to Mark Cave-Ayland for the suggestions. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190509103545.4a7fa71a@kryten> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix xxspltibAnton Blanchard
xxspltib raises a VMX or a VSX exception depending on the register set it is operating on. We had a check, but it was backwards. Fixes: f113283525a4 ("target-ppc: add xxspltib instruction") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190509061713.69490488@kryten> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix vsum2swsAnton Blanchard
A recent cleanup changed the pre zeroing of the result from 64 bit to 32 bit operations: - result.u64[i] = 0; + result.VsrW(i) = 0; This corrupts the result. Fixes: 60594fea298d ("target/ppc: remove various HOST_WORDS_BIGENDIAN hacks in int_helper.c") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190507004811.29968-9-anton@ozlabs.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix vslv and vsrvAnton Blanchard
vslv and vsrv are broken on little endian, we append 00 to the high byte not the low byte. Fix it by using the VsrB() accessor. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190507004811.29968-6-anton@ozlabs.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix xxbrq, xxbrwAnton Blanchard
Fix a typo in xxbrq and xxbrw where we put both results into the lower doubleword. Fixes: 8b3b2d75c7c0 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190507004811.29968-3-anton@ozlabs.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc: Fix xvxsigdpAnton Blanchard
Fix a typo in xvxsigdp where we put both results into the lower doubleword. Fixes: dd977e4f45cb ("target/ppc: Optimize x[sv]xsigdp using deposit_i64()") Signed-off-by: Anton Blanchard <anton@ozlabs.org> Message-Id: <20190507004811.29968-1-anton@ozlabs.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29target/ppc/kvm: Fix trace typoBoxuan Li
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk> Message-Id: <20190430172842.27369-1-liboxuan@connect.hku.hk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-28Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-next-280519-2' into staging Various testing updates - semihosting re-factor (used in system tests) - aarch64 and alpha system tests - editorconfig tweak for .S - some docker image updates - iotests clean-up (without make check inclusion) # gpg: Signature made Tue 28 May 2019 17:26:34 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits) tests/qemu-iotests: re-format output to for make check-block tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run Makefile.target: support per-target coverage reports Makefile: include per-target build directories in coverage report Makefile: fix coverage-report reference to BUILD_DIR .travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests tests/tcg/alpha: add system boot.S tests/tcg/multiarch: expand system memory test to cover more tests/tcg/minilib: support %c format char tests/tcg/multiarch: move the system memory test tests/tcg/aarch64: add system boot.S editorconfig: add settings for .s/.S files tests/tcg/multiarch: add hello world system test tests/tcg/multiarch: add support for multiarch system tests tests/docker: Test more components on the Fedora default image tests/docker: add ubuntu 18.04 MAINTAINERS: update for semihostings new home target/mips: convert UHI_plog to use common semihosting code target/mips: only build mips-semi for softmmu target/arm: correct return values for WRITE/READ in arm-semi ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-may-19-2019-v3' into staging MIPS queue for May 19th, 2019 - v3 # gpg: Signature made Sun 26 May 2019 17:07:07 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-may-19-2019-v3: BootLinuxSshTest: Test some userspace commands on Malta target/mips: realign comments to fix checkpatch warnings target/mips: add or remove space to fix checkpatch errors linux-user: fix __NR_semtimedop undeclared error mips: Decide to map PAGE_EXEC in map_address target/mips: Refactor and fix INSERT.<B|H|W|D> instructions target/mips: Refactor and fix COPY_U.<B|H|W> instructions target/mips: Refactor and fix COPY_S.<B|H|W|D> instructions target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian host target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardware target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardware Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28target/mips: convert UHI_plog to use common semihosting codeAlex Bennée
Rather than printing directly to stdout lets use our common semihosting code. There is one minor difference in that the output currently defaults to stderr instead of stdout however this can be controlled by connecting semihosting to a chardev. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-05-28target/mips: only build mips-semi for softmmuAlex Bennée
The is_uhi gates all semihosting calls and always returns false for CONFIG_USER_ONLY builds. There is no reason to build and link mips-semi for these builds so lets fix that. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28target/arm: correct return values for WRITE/READ in arm-semiAlex Bennée
The documentation says the write should return the number of bytes not written on an error (0 means everything was written). Read provides a buffer length and the return value should be the buffer length - bytes actually read. Remove the incorrect FIXME's and return the correct values. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-28target/arm: add LOG_UNIMP messages to arm-semiAlex Bennée
Clean-up our unimplemented bits with a proper message. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28target/arm: use the common interface for WRITE0/WRITEC in arm-semiAlex Bennée
Now we have a common semihosting console interface use that for our string output. However ARM is currently unique in also supporting semihosting for linux-user so we need to replicate the API in linux-user. If other architectures gain this support we can move the file later. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28target/arm: fixup some of the commentary for arm-semiAlex Bennée
This cleans up a number of the block comments to fit the proper style. While we are at it we also reference the official specification and document what the return register value can be. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-28semihosting: move semihosting configuration into its own directoryAlex Bennée
In preparation for having some more common semihosting code let's excise the current config magic from vl.c into its own file. We shall later add more conditionals to the build configurations so we can avoid building this if we don't need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-26target/mips: realign comments to fix checkpatch warningsJules Irenge
Realign comments to fix warnings issued by checkpatc.pl tool "WARNING: Block comments use a leading /* on a separate line" within "target/mips/cpu.h" file. Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190413202818.13622-3-jbi.octave@gmail.com>
2019-05-26target/mips: add or remove space to fix checkpatch errorsJules Irenge
Add or remove space to fix errors issued by checkpatch.pl tool "ERROR: spaces required around that..." "ERROR: space required after that..." "ERROR: space required before the open parenthesis" "ERROR: space required after that..." "ERROR: space prohibited between function name and open parenthesis" "ERROR: code indent should never use tabs" "ERROR: line over 90 characters" within "target/mips/cpu.h" file. Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190413202818.13622-2-jbi.octave@gmail.com>
2019-05-26mips: Decide to map PAGE_EXEC in map_addressJakub Jermář
This commit addresses QEMU Bug #1825311: mips_cpu_handle_mmu_fault renders all accessed pages executable It allows finer-grained control over whether the accessed page should be executable by moving the decision to the underlying map_address function, which has more information for this. As a result, pages that have the XI bit set in the TLB and are accessed for read/write, don't suddenly end up being executable. Fixes: https://bugs.launchpad.net/qemu/+bug/1825311 Fixes: 2fb58b73746e ('target-mips: add RI and XI fields to TLB entry') Signed-off-by: Jakub Jermář <jakub.jermar@kernkonzept.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190517123533.868479-1-jakub.jermar@kernkonzept.com>
2019-05-26target/mips: Refactor and fix INSERT.<B|H|W|D> instructionsMateja Marjanovic
The old version of the helper for the INSERT.<B|H|W|D> MSA instructions has been replaced with four helpers that don't use switch, and change the endianness of the given index, when executed on a big endian host. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554212605-16457-6-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Refactor and fix COPY_U.<B|H|W> instructionsMateja Marjanovic
The old version of the helper for the COPY_U.<B|H|W> MSA instructions has been replaced with four helpers that don't use switch, and change the endianness of the given index, when executed on a big endian host. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554212605-16457-5-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Refactor and fix COPY_S.<B|H|W|D> instructionsMateja Marjanovic
The old version of the helper for the COPY_S.<B|H|W|D> MSA instructions has been replaced with four helpers that don't use switch, and change the endianness of the given index, when executed on a big endian host. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554212605-16457-4-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian hostMateja Marjanovic
Fix the case when the host is a big endian machine, and change the approach toward ST.<B|H|W|D> instruction helpers. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554212605-16457-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian hostMateja Marjanovic
Fix the case when the host is a big endian machine, and change the approach toward LD.<B|H|W|D> instruction helpers. Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554212605-16457-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardwareMateja Marjanovic
MSA instructions MOD_<U|S>.<B|H|W|D> when dividing by zero, didn't return the same value when executed on a referent hardware (FPGA MIPS 64 r6, little endian) and when executed on QEMU, which is not a real bug, because the result when dividing by zero is UNPREDICTABLE [1] (page 255, 256). [1] MIPS Architecture for Programmers Volume IV-j: The MIPS64 SIMD Architecture Module, Revision 1.12 Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554207110-9113-3-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-26target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardwareMateja Marjanovic
MSA instructions DIV_<U|S>.<B|H|W|D> when dividing by zero, didn't return the same value when executed on a referent hardware (FPGA MIPS 64 r6, little endian) and when executed on QEMU, which is not a real bug, because the result when dividing by zero is UNPREDICTABLE [1] (page 141, 142). [1] MIPS Architecture for Programmers Volume IV-j: The MIPS64 SIMD Architecture Module, Revision 1.12 Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1554207110-9113-2-git-send-email-mateja.marjanovic@rt-rk.com>
2019-05-24target/riscv: Only flush TLB if SATP.ASID changesJonathan Behrens
There is an analogous change for ARM here: https://patchwork.kernel.org/patch/10649857 Signed-off-by: Jonathan Behrens <jonathan@fintelia.io> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: More accurate handling of `sip` CSRJonathan Behrens
According to the spec, "All bits besides SSIP, USIP, and UEIP in the sip register are read-only." Further, if an interrupt is not delegated to mode x, then "the corresponding bits in xip [...] should appear to be hardwired to zero. This patch implements both of those requirements. Signed-off-by: Jonathan Behrens <jonathan@fintelia.io> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add checks for several RVC reserved operandsRichard Henderson
C.ADDI16SP, C.LWSP, C.JR, C.ADDIW, C.LDSP all have reserved operands that were not diagnosed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add the HGATP register masksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add the HSTATUS register masksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviwed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add Hypervisor CSR macrosAlistair Francis
Add the 1.10.1 Hypervisor CSRs and remove the 1.9.1 spec versions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Allow setting mstatus virtulisation bitsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Revieweb-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add the MPV and MTL mstatus bitsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Improve the scause logicAlistair Francis
No functional change, just making the code easier to read. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Trigger interrupt on MIP update asynchronouslyAlistair Francis
The requirement of holding the iothread_mutex is burdersome when swapping the background and foreground registers in the Hypervisor extension. To avoid the requrirement let's set the interrupt asynchronously. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Mark privilege level 2 as reservedAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Add a base 32 and 64 bit CPUAlistair Francis
At the same time deprecate the ISA string CPUs. It is dobtful anyone specifies the CPUs, but we are keeping them for the Spike machine (which is about to be depreated) so we may as well just mark them as deprecated. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Create settable CPU propertiesAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24target/riscv: Remove spaces from register namesRichard Henderson
These extra spaces make the "-d op" dump look weird. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-20 19:42:40 +0000