aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2023-06-13target/riscv: Introduce cur_insn_len into DisasContextWeiwei Li
Use cur_insn_len to store the length of the current instruction to prepare for PC-relative translation. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230526072124.298466-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Fix target address to update badaddrWeiwei Li
Compute the target address before storing it into badaddr when mis-aligned exception is triggered. Use a target_pc temp to store the target address to avoid the confusing operation that udpate target address into cpu_pc before misalign check, then update it into badaddr and restore cpu_pc to current pc if exception is triggered. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230526072124.298466-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Pass RISCVCPUConfig as target_info to disassemble_infoWeiwei Li
Pass RISCVCPUConfig as disassemble_info.target_info to support disas of conflict instructions related to specific extensions. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230523093539.203909-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Split RISCVCPUConfig declarations from cpu.h into cpu_cfg.hWeiwei Li
Split RISCVCPUConfig declarations to prepare for passing it to disas. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230523093539.203909-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: smstateen knobsMayuresh Chitale
Add knobs to allow users to enable smstateen and also export it via the ISA extension string. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230518175058.2772506-4-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Reuse tb->flags.FSMayuresh Chitale
When misa.F is 0 tb->flags.FS field is unused and can be used to save the current state of smstateen0.FCSR check which is needed by the floating point translation routines. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-Id: <20230518175058.2772506-3-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: smstateen check for fcsrMayuresh Chitale
Implement the s/h/mstateen.fcsr bit as defined in the smstateen spec and check for it when accessing the fcsr register and its fields. Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230518175058.2772506-2-mchitale@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Update cur_pmmask/base when xl changesWeiwei Li
write_mstatus() can only change current xl when in debug mode. And we need update cur_pmmask/base in this case. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230524015933.17349-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Fix pointer mask transformation for vector addressWeiwei Li
actual_address = (requested_address & ~mpmmask) | mpmbase. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230524015933.17349-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Deny access if access is partially inside the PMP entryWeiwei Li
Access will fail if access is partially inside the PMP entry. However,only setting ret = false doesn't really mean pmp violation since pmp_hart_has_privs_default() may return true at the end of pmp_hart_has_privs(). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-13-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Separate pmp_update_rule() in pmpcfg_csr_writeWeiwei Li
Use pmp_update_rule_addr() and pmp_update_rule_nums() separately to update rule nums only once for each pmpcfg_csr_write. Then remove pmp_update_rule() since it become unused. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-12-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Flush TLB only when pmpcfg/pmpaddr really changesWeiwei Li
TLB needn't be flushed when pmpcfg/pmpaddr don't changes. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230517091519.34439-11-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Flush TLB when pmpaddr is updatedWeiwei Li
TLB should be flushed not only for pmpcfg csr changes, but also for pmpaddr csr changes. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230517091519.34439-10-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Update the next rule addr in pmpaddr_csr_write()Weiwei Li
Currently only the rule addr of the same index of pmpaddr is updated when pmpaddr CSR is modified. However, the rule addr of next PMP entry may also be affected if its A field is PMP_AMATCH_TOR. So we should also update it in this case. Write to pmpaddr CSR will not affect the rule nums, So we needn't update call pmp_update_rule_nums() in pmpaddr_csr_write(). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-9-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Flush TLB when MMWP or MML bits are changedWeiwei Li
MMWP and MML bits may affect the allowed privs of PMP entries and the default privs, both of which may change the allowed privs of exsited TLB entries. So we need flush TLB when they are changed. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-8-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Remove unused paramters in pmp_hart_has_privs_default()Weiwei Li
The addr and size parameters in pmp_hart_has_privs_default() are unused. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-7-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Make RLB/MML/MMWP bits writable only when Smepmp is enabledWeiwei Li
RLB/MML/MMWP bits in mseccfg CSR are introduced by Smepmp extension. So they can only be writable and set to 1s when cfg.epmp is true. Then we also need't check on epmp in pmp_hart_has_privs_default(). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-6-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Change the return type of pmp_hart_has_privs() to boolWeiwei Li
We no longer need the pmp_index for matched PMP entry now. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-5-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Make the short cut really work in pmp_hart_has_privsWeiwei Li
Return the result directly for short cut, since We needn't do the following check on the PMP entries if there is no PMP rules. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-4-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Move pmp_get_tlb_size apart from get_physical_address_pmpWeiwei Li
pmp_get_tlb_size can be separated from get_physical_address_pmp and is only needed when ret == TRANSLATE_SUCCESS. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Update pmp_get_tlb_size()Weiwei Li
PMP entries before (including) the matched PMP entry may only cover partial of the TLB page, and this may split the page into regions with different permissions. Such as for PMP0 (0x80000008~0x8000000F, R) and PMP1 (0x80000000~ 0x80000FFF, RWX), write access to 0x80000000 will match PMP1. However we cannot cache the translation result in the TLB since this will make the write access to 0x80000008 bypass the check of PMP0. So we should check all of them instead of the matched PMP entry in pmp_get_tlb_size() and set the tlb_size to 1 in this case. Set tlb_size to TARGET_PAGE_SIZE if PMP is not support or there is no PMP rules. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517091519.34439-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: rework write_misa()Daniel Henrique Barboza
write_misa() must use as much common logic as possible. We want to open code just the bits that are exclusive to the CSR write operation and TCG internals. Our validation is done with riscv_cpu_validate_set_extensions(), but we need a small tweak first. When enabling RVG we're doing: env->misa_ext |= RVI | RVM | RVA | RVF | RVD; env->misa_ext_mask = env->misa_ext; This works fine for realize() time but this can potentially overwrite env->misa_ext_mask if we reutilize the function for write_misa(). Instead of doing misa_ext_mask = misa_ext, sum up the RVG extensions in misa_ext_mask as well. This won't change realize() time behavior (misa_ext_mask will be == misa_ext) and will ensure that write_misa() won't change misa_ext_mask by accident. After that, rewrite write_misa() to work as follows: - mask the write using misa_ext_mask to avoid enabling unsupported extensions; - suppress RVC if the next insn isn't aligned; - disable RVG if any of RVG dependencies are being disabled by the user; - assign env->misa_ext and run riscv_cpu_validate_set_extensions(). On error, rollback env->misa_ext to its original value, logging a GUEST_ERROR to inform the user about the failed write; - handle RVF and MSTATUS_FS and continue as usual. Let's keep write_misa() as experimental for now until this logic gains enough mileage. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230517135714.211809-12-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()Daniel Henrique Barboza
We have 4 config settings being done in riscv_cpu_init(): ext_ifencei, ext_icsr, mmu and pmp. This is also the constructor of the "riscv-cpu" device, which happens to be the parent device of every RISC-V cpu. The result is that these 4 configs are being set every time, and every other CPU should always account for them. CPUs such as sifive_e need to disable settings that aren't enabled simply because the parent class happens to be enabling it. Moving all configurations from the parent class to each CPU will centralize the config of each CPU into its own init(), which is clearer than having to account to whatever happens to be set in the parent device. These settings are also being set in register_cpu_props() when no 'misa_ext' is set, so for these CPUs we don't need changes. Named CPUs will receive all cfgs that the parent were setting into their init(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-11-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: validate extensions before riscv_timer_init()Daniel Henrique Barboza
There is no need to init timers if we're not even sure that our extensions are valid. Execute riscv_cpu_validate_set_extensions() before riscv_timer_init(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-10-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: add riscv_cpu_validate_misa_mxl()Daniel Henrique Barboza
Let's remove more code that is open coded in riscv_cpu_realize() and put it into a helper. Let's also add an error message instead of just asserting out if env->misa_mxl_max != env->misa_mlx. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: add priv_spec validate/disable_exts helpersDaniel Henrique Barboza
We're doing env->priv_spec validation and assignment at the start of riscv_cpu_realize(), which is fine, but then we're doing a force disable on extensions that aren't compatible with the priv version. This second step is being done too early. The disabled extensions might be re-enabled again in riscv_cpu_validate_set_extensions() by accident. A better place to put this code is at the end of riscv_cpu_validate_set_extensions() after all the validations are completed. Add a new helper, riscv_cpu_disable_priv_spec_isa_exts(), to disable the extesions after the validation is done. While we're at it, create a riscv_cpu_validate_priv_spec() helper to host all env->priv_spec related validation to unclog riscv_cpu_realize a bit. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Update check for Zca/Zcf/ZcdWeiwei Li
Even though Zca/Zcf/Zcd can be included by C/F/D, however, their priv version is higher than the priv version of C/F/D. So if we use check for them instead of check for C/F/D totally, it will trigger new problem when we try to disable the extensions based on the configured priv version. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Mask the implicitly enabled extensions in isa_string based on ↵Weiwei Li
priv version Using implicitly enabled extensions such as Zca/Zcf/Zcd instead of their super extensions can simplify the extension related check. However, they may have higher priv version than their super extensions. So we should mask them in the isa_string based on priv version to make them invisible to user if the specified priv version is lower than their minimal priv version. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: add PRIV_VERSION_LATESTDaniel Henrique Barboza
All these generic CPUs are using the latest priv available, at this moment PRIV_VERSION_1_12_0: - riscv_any_cpu_init() - rv32_base_cpu_init() - rv64_base_cpu_init() - rv128_base_cpu_init() Create a new PRIV_VERSION_LATEST enum and use it in those cases. I'll make it easier to update everything at once when a new priv version is available. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: remove set_priv_version()Daniel Henrique Barboza
The setter is doing nothing special. Just set env->priv_ver directly. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: remove set_vext_version()Daniel Henrique Barboza
This setter is doing nothing else but setting env->vext_ver. Assign the value directly. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/cpu.c: add riscv_cpu_validate_v()Daniel Henrique Barboza
The RVV verification will error out if fails and it's being done at the end of riscv_cpu_validate_set_extensions(), after we've already set some extensions that are dependent on RVV. Let's put it in its own function and do it earlier. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230517135714.211809-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv: Move zc* out of the experimental propertiesWeiwei Li
Zc* extensions (version 1.0) are ratified. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230510030040.20528-1-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13target/riscv/vector_helper.c: skip set tail when vta is zeroDaniel Henrique Barboza
The function is a no-op if 'vta' is zero but we're still doing a lot of stuff in this function regardless. vext_set_elems_1s() will ignore every single time (since vta is zero) and we just wasted time. Skip it altogether in this case. Aside from the code simplification there's a noticeable emulation performance gain by doing it. For a regular C binary that does a vectors operation like this: ======= #define SZ 10000000 int main () { int *a = malloc (SZ * sizeof (int)); int *b = malloc (SZ * sizeof (int)); int *c = malloc (SZ * sizeof (int)); for (int i = 0; i < SZ; i++) c[i] = a[i] + b[i]; return c[SZ - 1]; } ======= Emulating it with qemu-riscv64 and RVV takes ~0.3 sec: $ time ~/work/qemu/build/qemu-riscv64 \ -cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out real 0m0.303s user 0m0.281s sys 0m0.023s With this skip we take ~0.275 sec: $ time ~/work/qemu/build/qemu-riscv64 \ -cpu rv64,debug=false,vext_spec=v1.0,v=true,vlen=128 ./foo.out real 0m0.274s user 0m0.252s sys 0m0.019s This performance gain adds up fast when executing heavy benchmarks like SPEC. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-Id: <20230427205708.246679-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-10Merge tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu into stagingRichard Henderson
ppc patch queue for 2023-06-10: This queue includes several assorted fixes for target/ppc emulation and XIVE2. It also includes an openpic fix, an avocado fix for ppc64 binaries without slipr and a Kconfig change for MAC_NEWWORLD. # -----BEGIN PGP SIGNATURE----- # # iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0 # MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC # i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw== # =EezE # -----END PGP SIGNATURE----- # gpg: Signature made Sat 10 Jun 2023 06:29:30 AM PDT # gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164 # gpg: issuer "danielhb413@gmail.com" # gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164 * tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu: (29 commits) hw/ppc/Kconfig: MAC_NEWWORLD should always select USB_OHCI_PCI target/ppc: Implement gathering irq statistics tests/avocado/tuxrun_baselines: Fix ppc64 tests for binaries without slirp hw/ppc/openpic: Do not open-code ROUND_UP() macro target/ppc: Decrementer fix BookE semantics target/ppc: Fix decrementer time underflow and infinite timer loop target/ppc: Rework store conditional to avoid branch target/ppc: Remove larx/stcx. memory barrier semantics target/ppc: Ensure stcx size matches larx target/ppc: Fix lqarx to set cpu_reserve target/ppc: Eliminate goto in mmubooke_check_tlb() target/ppc: Change ppcemb_tlb_check() to return bool target/ppc: Simplify ppcemb_tlb_search() target/ppc: Remove some unneded line breaks target/ppc: Move ppcemb_tlb_search() to mmu_common.c target/ppc: Remove "ext" parameter of ppcemb_tlb_check() target/ppc: Remove single use function target/ppc: PMU implement PERFM interrupts target/ppc: Support directed privileged doorbell interrupt (SDOOR) target/ppc: Fix msgclrp interrupt type ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-10target/ppc: Implement gathering irq statisticsBALATON Zoltan
Count exceptions which can be queried with info irq monitor command. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230606220200.7EBCC74635C@zero.eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Rework store conditional to avoid branchNicholas Piggin
Rework store conditional to avoid a branch in the success case. Change some of the variable names and layout while here so gen_conditional_store more closely matches gen_stqcx_. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230605025445.161932-4-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Remove larx/stcx. memory barrier semanticsNicholas Piggin
larx and stcx. are not defined to order any memory operations. Remove the barriers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230605025445.161932-3-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Ensure stcx size matches larxNicholas Piggin
Differently-sized larx/stcx. pairs can succeed if the starting address matches. Add a check to require the size of stcx. exactly match the larx that established the reservation. Use the term "reserve_length" for this state, which matches the terminology used in the ISA. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230605025445.161932-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Fix lqarx to set cpu_reserveNicholas Piggin
lqarx does not set cpu_reserve, which causes stqcx. to never succeed. Cc: qemu-stable@nongnu.org Fixes: 94bf2658676 ("target/ppc: Use atomic load for LQ and LQARX") Fixes: 57b38ffd0c6 ("target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230605025445.161932-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Eliminate goto in mmubooke_check_tlb()BALATON Zoltan
Move out checking PID registers into a separate function which makes mmubooke_check_tlb() simpler and avoids using goto. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <bd84d5f38af0ba2983ccd5c07635db49267c828f.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Change ppcemb_tlb_check() to return boolBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <bacd1bcbe99c07930c29a9815915da9ac75f6920.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Simplify ppcemb_tlb_search()BALATON Zoltan
No nead to store return value and break from loop when we can return directly. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <d470118c3adcbd41b1a91779f6bb7cbdb2b0d346.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Remove some unneded line breaksBALATON Zoltan
Make lines shorter and fix indentation in some functions prototypes. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <70952ba2d82141db1cf5cfcf4b227402be575874.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Move ppcemb_tlb_search() to mmu_common.cBALATON Zoltan
This function is the only reason why ppcemb_tlb_check() is not static to mmu_common.c but it also better fits in mmu_common.c so move it there. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <b64fd712a773558dea9b84945c57785546c0ae2e.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Remove "ext" parameter of ppcemb_tlb_check()BALATON Zoltan
This is only used by one caller so simplify function by removing this parameter and move the operation to the single place where it's used. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <b21f11ae20e8a8c2e8b5d943f2bff12b5356005a.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Remove single use functionBALATON Zoltan
The get_physical_address() function is a trivial wrapper of get_physical_address_wtlb() that is only used once. Remove it and call get_physical_address_wtlb() directly instead. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <302697d63d26caebefaeee1e45352145ebd0318a.1685448535.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: PMU implement PERFM interruptsNicholas Piggin
The PMU raises a performance monitor exception (causing an interrupt when MSR[EE]=1) when MMCR0[PMAO] is set, and lowers it when clear. Wire this up and implement the interrupt delivery for books. Linux perf record can now collect PMI-driven samples. fire_PMC_interrupt is renamed to perfm_alert, which matches a bit closer to the new terminology used in the ISA and distinguishes the alert condition (e.g., counter overflow) from the PERFM (or EBB) interrupts. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20230530134313.387252-2-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Support directed privileged doorbell interrupt (SDOOR)Nicholas Piggin
BookS msgsndp instruction to self or DPDES register can cause SDOOR interrupts which crash QEMU with exception not implemented. Linux does not use msgsndp in SMT1, and KVM only uses DPDES to cause doorbells when emulating a SMT guest (which is not the default), so this has gone unnoticed. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230530130526.372701-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10target/ppc: Fix msgclrp interrupt typeNicholas Piggin
msgclrp matches msgsndp and should clear PPC_INTERRUPT_DOORBELL. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230530130714.373215-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 05:41:24 +0000