aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2023-06-21target/tricore: Introduce DISAS_TARGET_EXITBastian Koppelmann
this replaces all calls to tcg_gen_exit_tb() and moves them to tricore_tb_stop(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix RR_JLI clobbering reg A[11]Bastian Koppelmann
if A[r1] == A[11], then we would overwrite the destination address of the jump with the return address. Reported-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-2-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix helper_ret() not correctly restoring PSWBastian Koppelmann
We are always taking the TRICORE_FEATURE_13 branch as every CPU has TRICORE_FEATURE_13. For CPUs with ISA > 1.3 we have to take the else branch. We fix this by inverting the condition. We check for TRICORE_FEATURE_131, which every CPU except TRICORE_FEATURE_13 CPUs have. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1700 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-5-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add CHECK_REG_PAIR() for insn accessing 64 bit regsBastian Koppelmann
some insns were not checking if an even index was used to access a 64 bit register. In the worst case that could lead to a buffer overflow as reported in https://gitlab.com/qemu-project/qemu/-/issues/1698. Reported-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-4-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Correctly fix saving PSW.CDE to CSA on callBastian Koppelmann
we don't want to save PSW.CDC to the CSA, but PSW.CDE must be saved. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1699 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix out-of-bounds index in imask instructionSiqi Chen
When translating "imask" instruction of Tricore architecture, QEMU did not check whether the register index was out of bounds, resulting in a global-buffer-overflow. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1698 Reported-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612065633.149152-1-coc.cyqh@gmail.com> Message-Id: <20230612113245.56667-2-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add DISABLE insn variantBastian Koppelmann
this variant saves the 'IE' bit to a 'd' register. The 'IE' bitfield changed from ISA version 1.6.1, so we add icr_ie_offset to DisasContext as with the other DISABLE insn. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-9-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Implement SYCSCALL insnBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1452 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-8-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add shuffle insnBastian Koppelmann
this is based on code by volumit (https://github.com/volumit/qemu/). Reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 and https://gitlab.com/qemu-project/qemu/-/issues/1452. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-7-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add crc32.b insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-6-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add crc32l.w insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-5-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add LHA insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-4-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add popcnt.w insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Introduce ISA 1.6.2 featureBastian Koppelmann
we also introduce the tc37x CPU that implements that ISA version. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-2-kbastian@mail.uni-paderborn.de>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20meson: Replace CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLYPhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, use the clearer 'CONFIG_SYSTEM_ONLY' key to check for system emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-9-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/ppc: Check for USER_ONLY definition instead of SOFTMMU onePhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, replace the system emulation check by !user emulation one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230613133347.82210-5-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/m68k: Check for USER_ONLY definition instead of SOFTMMU onePhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, replace the system emulation check by !user emulation one. Invert some if() ladders for clarity. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-4-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/tricore: Remove pointless CONFIG_SOFTMMU guardPhilippe Mathieu-Daudé
We don't build any user emulation target for Tricore, only the system emulation. No need to check for it as it is always defined. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230613133347.82210-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/i386: Simplify i386_tr_init_disas_context()Philippe Mathieu-Daudé
Since cpu_mmu_index() is well-defined for user-only, we can remove the surrounding #ifdef'ry entirely. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-2-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-19target/arm: Convert load/store tags insns to decodetreePeter Maydell
Convert the instructions in the load/store memory tags instruction group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-21-peter.maydell@linaro.org
2023-06-19target/arm: Convert load/store single structure to decodetreePeter Maydell
Convert the ASIMD load/store single structure insns to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230602155223.2040685-20-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-19target/arm: Convert load/store (multiple structures) to decodetreePeter Maydell
Convert the instructions in the ASIMD load/store multiple structures instruction classes to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-19-peter.maydell@linaro.org
2023-06-19target/arm: Convert LDAPR/STLR (imm) to decodetreePeter Maydell
Convert the instructions in the LDAPR/STLR (unscaled immediate) group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-18-peter.maydell@linaro.org
2023-06-19target/arm: Convert load (pointer auth) insns to decodetreePeter Maydell
Convert the instructions in the load/store register (pointer authentication) group ot decodetree: LDRAA, LDRAB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-17-peter.maydell@linaro.org
2023-06-19target/arm: Convert atomic memory ops to decodetreePeter Maydell
Convert the insns in the atomic memory operations group to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-16-peter.maydell@linaro.org
2023-06-19target/arm: Convert LDR/STR reg+reg to decodetreePeter Maydell
Convert the LDR and STR instructions which take a register plus register offset to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-15-peter.maydell@linaro.org
2023-06-19target/arm: Convert LDR/STR with 12-bit immediate to decodetreePeter Maydell
Convert the LDR and STR instructions which use a 12-bit immediate offset to decodetree. We can reuse the existing LDR and STR trans functions for these. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-14-peter.maydell@linaro.org
2023-06-19target/arm: Convert ld/st reg+imm9 insns to decodetreePeter Maydell
Convert the load and store instructions which use a 9-bit immediate offset to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-13-peter.maydell@linaro.org
2023-06-19target/arm: Convert load/store-pair to decodetreePeter Maydell
Convert the load/store register pair insns (LDP, STP, LDNP, STNP, LDPSW, STGP) to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230602155223.2040685-12-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-19target/arm: Convert load reg (literal) group to decodetreePeter Maydell
Convert the "Load register (literal)" instruction class to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-11-peter.maydell@linaro.org
2023-06-19target/arm: Convert LDXP, STXP, CASP, CAS to decodetreePeter Maydell
Convert the load/store exclusive pair (LDXP, STXP, LDAXP, STLXP), compare-and-swap pair (CASP, CASPA, CASPAL, CASPL), and compare-and swap (CAS, CASA, CASAL, CASL) instructions to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-10-peter.maydell@linaro.org
2023-06-19target/arm: Convert load/store exclusive and ordered to decodetreePeter Maydell
Convert the instructions in the load/store exclusive (STXR, STLXR, LDXR, LDAXR) and load/store ordered (STLR, STLLR, LDAR, LDLAR) to decodetree. Note that for STLR, STLLR, LDAR, LDLAR this fixes an under-decoding in the legacy decoder where we were not checking that the RES1 bits in the Rs and Rt2 fields were set. The new function ldst_iss_sf() is equivalent to the existing disas_ldst_compute_iss_sf(), but it takes the pre-decoded 'ext' field rather than taking an undecoded two-bit opc field and extracting 'ext' from it. Once all the loads and stores have been converted to decodetree disas_ldst_compute_iss_sf() will be unused and can be deleted. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-9-peter.maydell@linaro.org
2023-06-19target/arm: Convert exception generation instructions to decodetreePeter Maydell
Convert the exception generation instructions SVC, HVC, SMC, BRK and HLT to decodetree. The old decoder decoded the halting-debug insnns DCPS1, DCPS2 and DCPS3 just in order to then make them UNDEF; as with DRPS, we don't bother to decode them, but document the patterns in a64.decode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-8-peter.maydell@linaro.org
2023-06-19target/arm: Convert MSR (reg), MRS, SYS, SYSL to decodetreePeter Maydell
Convert MSR (reg), MRS, SYS, SYSL to decodetree. For QEMU these are all essentially the same instruction (system register access). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-7-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-19target/arm: Convert MSR (immediate) to decodetreePeter Maydell
Convert the MSR (immediate) insn to decodetree. Our implementation has basically no commonality between the different destinations, so we decode the destination register in a64.decode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-6-peter.maydell@linaro.org
2023-06-19target/arm: Convert CFINV, XAFLAG and AXFLAG to decodetreePeter Maydell
Convert the CFINV, XAFLAG and AXFLAG insns to decodetree. The old decoder handles these in handle_msr_i(), but the architecture defines them as separate instructions from MSR (immediate). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-5-peter.maydell@linaro.org
2023-06-19target/arm: Convert barrier insns to decodetreePeter Maydell
Convert the insns in the "Barriers" instruction class to decodetree: CLREX, DSB, DMB, ISB and SB. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-4-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-19target/arm: Convert hint instruction space to decodetreePeter Maydell
Convert the various instructions in the hint instruction space to decodetree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-3-peter.maydell@linaro.org
2023-06-19target/arm: Consistently use finalize_memop_asimd() for ASIMD loads/storesPeter Maydell
In the recent refactoring we missed a few places which should be calling finalize_memop_asimd() for ASIMD loads and stores but instead are just calling finalize_memop(); fix these. For the disas_ldst_single_struct() and disas_ldst_multiple_struct() cases, this is not a behaviour change because there the size is never MO_128 and the two finalize functions do the same thing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-19target/arm: Pass memop to gen_mte_check1_mmuidx() in reg_imm9 decodePeter Maydell
In disas_ldst_reg_imm9() we missed one place where a call to a gen_mte_check* function should now be passed the memop we have created rather than just being passed the size. Fix this. Fixes: 0a9091424d ("target/arm: Pass memop to gen_mte_check1*") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-19target/arm: Return correct result for LDG when ATA=0Peter Maydell
The LDG instruction loads the tag from a memory address (identified by [Xn + offset]), and then merges that tag into the destination register Xt. We implemented this correctly for the case when allocation tags are enabled, but didn't get it right when ATA=0: instead of merging the tag bits into Xt, we merged them into the memory address [Xn + offset] and then set Xt to that. Merge the tag bits into the old Xt value, as they should be. Cc: qemu-stable@nongnu.org Fixes: c15294c1e36a7dd9b25 ("target/arm: Implement LDG, STG, ST2G instructions") Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19target/arm: Fix return value from LDSMIN/LDSMAX 8/16 bit atomicsPeter Maydell
The atomic memory operations are supposed to return the old memory data value in the destination register. This value is not sign-extended, even if the operation is the signed minimum or maximum. (In the pseudocode for the instructions the returned data value is passed to ZeroExtend() to create the value in the register.) We got this wrong because we were doing a 32-to-64 zero extend on the result for 8 and 16 bit data values, rather than the correct amount of zero extension. Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data sizes rather than ext32u. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
2023-06-16Merge tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu into ↵Richard Henderson
staging pull-loongarch-20230616 # -----BEGIN PGP SIGNATURE----- # # iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZIwysgAKCRBAov/yOSY+ # 39FYA/465KtY2jDt4xG6AdwZDHckfxZQWlrfhyZvtapOkUG4AprOBV2nSS/ukyD4 # V8bg2/6cLS0GRKfDsqA3DcxSASWCAggIU4fTSj+DlYOZhNUIq14qzwqciZnO5CIH # QDczSqu2LKRdP9j6MCtzIaZq/8pPDcOlgm7Dyct/kDo/64E2sg== # =rD4j # -----END PGP SIGNATURE----- # gpg: Signature made Fri 16 Jun 2023 12:00:18 PM CEST # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu: target/loongarch: Fix CSR.DMW0-3.VSEG check hw/loongarch: Supplement cpu topology arguments hw/loongarch: Add numa support hw/intc: Set physical cpuid route for LoongArch ipi device hw/loongarch/virt: Add cpu arch_id support Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-16target/loongarch: Fix CSR.DMW0-3.VSEG checkJiajie Chen
The previous code checks whether the highest 16 bits of virtual address equal to that of CSR.DMW0-3. This is incorrect according to the spec, and is corrected to compare only the highest four bits instead. Signed-off-by: Jiajie Chen <c@jia.je> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230614065556.2397513-1-c@jia.je> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-06-16hw/intc: Set physical cpuid route for LoongArch ipi deviceTianrui Zhao
LoongArch ipi device uses physical cpuid to route to different vcpus rather logical cpuid, and the physical cpuid is the same with cpuid in acpi dsdt and srat table. Reviewed-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230613120552.2471420-3-zhaotianrui@loongson.cn>
2023-06-15target/arm: Allow users to set the number of VFP registersCédric Le Goater
Cortex A7 CPUs with an FPU implementing VFPv4 without NEON support have 16 64-bit FPU registers and not 32 registers. Let users set the number of VFP registers with a CPU property. The primary use case of this property is for the Cortex A7 of the Aspeed AST2600 SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-14Merge tag 'pull-riscv-to-apply-20230614' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging Second RISC-V PR for 8.1 * Skip Vector set tail when vta is zero * Move zc* out of the experimental properties * Mask the implicitly enabled extensions in isa_string based on priv version * Rework CPU extension validation and validate MISA changes * Fixup PMP TLB cacheing errors * Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes * Fixup PMP bypass checks * Deny access if access is partially inside a PMP entry * Correct OpenTitanState parent type/size * Fix QEMU crash when NUMA nodes exceed available CPUs * Fix pointer mask transformation for vector address * Updates and improvements for Smstateen * Support disas for Zcm* extensions * Support disas for Z*inx extensions * Remove unused decomp_rv32/64 value for vector instructions * Enable PC-relative translation * Assume M-mode FW in pflash0 only when "-bios none" * Support using pflash via -blockdev option * Add vector registers to log * Clean up reference of Vector MTYPE * Remove the check for extra Vector tail elements * Smepmp: Return error when access permission not allowed in PMP * Fixes for smsiaddrcfg and smsiaddrcfgh in AIA # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT # gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js # LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF # F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt # jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO # WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ # Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj # N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN # Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8 # zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow # Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe # uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0= # =fOTc # -----END PGP SIGNATURE----- # gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits) hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only. target/riscv: Smepmp: Return error when access permission not allowed in PMP target/riscv/vector_helper.c: Remove the check for extra tail elements target/riscv/vector_helper.c: clean up reference of MTYPE target/riscv: Fix initialized value for cur_pmmask util/log: Add vector registers to log docs/system: riscv: Add pflash usage details riscv/virt: Support using pflash via -blockdev option hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none" target/riscv: Remove pc_succ_insn from DisasContext target/riscv: Enable PC-relative translation target/riscv: Use true diff for gen_pc_plus_diff target/riscv: Change gen_set_pc_imm to gen_update_pc target/riscv: Change gen_goto_tb to work on displacements target/riscv: Introduce cur_insn_len into DisasContext target/riscv: Fix target address to update badaddr disas/riscv.c: Remove redundant parentheses disas/riscv.c: Fix lines with over 80 characters disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions disas/riscv.c: Support disas for Z*inx extensions ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13target/i386: Rename helper template headers as '.h.inc'Philippe Mathieu-Daudé
Since commit 139c1837db ("meson: rename included C source files to .c.inc"), QEMU standard procedure for included C files is to use *.c.inc. Besides, since commit 6a0057aa22 ("docs/devel: make a statement about includes") this is documented as the Coding Style: If you do use template header files they should be named with the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are being included for expansion. Therefore move the included templates in the tcg/ directory and rename as '.h.inc'. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230608133108.72655-5-philmd@linaro.org>
2023-06-13target/i386/helper: Shuffle do_cpu_init()Philippe Mathieu-Daudé
Move the #ifdef'ry inside do_cpu_init() instead of declaring an empty stub for user emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230602224628.59546-3-philmd@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 00:06:24 +0000