aboutsummaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2023-06-25target/ppc: Change partition-scope translate interfaceNicholas Piggin
Rather than always performing partition scope page table translation with access type of 0 (MMU_DATA_LOAD), pass through the processor access type which first initiated the translation sequence. Process- scoped page table loads are then set to MMU_DATA_LOAD access type in the xlate function. This will allow more information to be passed to the exception handler in the next patch. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-25target/ppc: Fix instruction loading endianness in alignment interruptNicholas Piggin
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap after cpu_ldl_code(). This corrects DSISR bits in alignment interrupts when running in little endian mode. Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-25target/ppc: Fix timer register accessors when !KVMCédric Le Goater
When the Timer Control and Timer Status registers are modified, avoid calling the KVM backend when not available Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-25target/ppc: gdbstub init spr gdb_id for all CPUsNicholas Piggin
Make sure each CPU gets its state set up for gdb, not just the ones before PowerPCCPUClass has had its gdb state set up. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-23target/arm: Fix sve predicate store, 8 <= VQ <= 15Richard Henderson
Brown bag time: store instead of load results in uninitialized temp. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704 Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620134659.817559-1-richard.henderson@linaro.org Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r") Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Restructure has_vfp_d32 testRichard Henderson
One cannot test for feature aa32_simd_r32 without first testing if AArch32 mode is supported at all. This leads to qemu-system-aarch64: ARM CPUs must have both VFP-D32 and Neon or neither for Apple M1 cpus. We already have a check for ARMv8-A never setting vfp-d32 true, so restructure the code so that AArch64 avoids the test entirely. Reported-by: Mads Ynddal <mads@ynddal.dk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Mads Ynddal <m.ynddal@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Mads Ynddal <m.ynddal@samsung.com> Message-id: 20230619140216.402530-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Add cpu properties for enabling FEAT_RMERichard Henderson
Add an x-rme cpu property to enable FEAT_RME. Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ, for testing various possible configurations. We're not currently completely sure whether FEAT_RME will be OK to enable purely as a CPU-level property, or if it will need board co-operation, so we're making these experimental x- properties, so that the people developing the system level software for RME can try to start using this and let us know how it goes. The command line syntax for enabling this will change in future, without backwards-compatibility. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Implement the granule protection checkRichard Henderson
Place the check at the end of get_phys_addr_with_struct, so that we check all physical results. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Implement GPC exceptionsRichard Henderson
Handle GPC Fault types in arm_deliver_fault, reporting as either a GPC exception at EL3, or falling through to insn or data aborts at various exception levels. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Add GPC syndromeRichard Henderson
The function takes the fields as filled in by the Arm ARM pseudocode for TakeGPCException. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Use get_phys_addr_with_struct for stage2Richard Henderson
This fixes a bug in which we failed to initialize the result attributes properly after the memset. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Move s1_is_el0 into S1TranslateRichard Henderson
Instead of passing this to get_phys_addr_lpae, stash it in the S1Translate structure. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Use get_phys_addr_with_struct in S1_ptw_translateRichard Henderson
Do not provide a fast-path for physical addresses, as those will need to be validated for GPC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Handle no-execute for Realm and Root regimesRichard Henderson
While Root and Realm may read and write data from other spaces, neither may execute from other pa spaces. This happens for Stage1 EL3, EL2, EL2&0, and Stage2 EL1&0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Handle Block and Page bits for security spaceRichard Henderson
With Realm security state, bit 55 of a block or page descriptor during the stage2 walk becomes the NS bit; during the stage1 walk the bit 5 NS bit is RES0. With Root security state, bit 11 of the block or page descriptor during the stage1 walk becomes the NSE bit. Rather than collecting an NS bit and applying it later, compute the output pa space from the input pa space and unconditionally assign. This means that we no longer need to adjust the output space earlier for the NSTable bit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: NSTable is RES0 for the RME EL3 regimeRichard Henderson
Test in_space instead of in_secure so that we don't switch out of Root space. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Pipe ARMSecuritySpace through ptw.cRichard Henderson
Add input and output space members to S1Translate. Set and adjust them in S1_ptw_translate, and the various points at which we drop secure state. Initialize the space in get_phys_addr; for now leave get_phys_addr_with_secure considering only secure vs non-secure spaces. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Remove __attribute__((nonnull)) from ptw.cRichard Henderson
This was added in 7e98e21c098 as part of a reorg in which one of the argument had been legally NULL, and this caught actual instances. Now that the reorg is complete, this serves little purpose. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Introduce ARMMMUIdx_Phys_{Realm,Root}Richard Henderson
With FEAT_RME, there are four physical address spaces. For now, just define the symbols, and mention them in the same spots as the other Phys indexes in ptw.c. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Adjust the order of Phys and Stage2 ARMMMUIdxRichard Henderson
It will be helpful to have ARMMMUIdx_Phys_* to be in the same relative order as ARMSecuritySpace enumerators. This requires the adjustment to the nstable check. While there, check for being in secure state rather than rely on clearing the low bit making no change to non-secure state. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Introduce ARMSecuritySpaceRichard Henderson
Introduce both the enumeration and functions to retrieve the current state, and state outside of EL3. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Add RME cpregsRichard Henderson
This includes GPCCR, GPTBR, MFAR, the TLB flush insns PAALL, PAALLOS, RPALOS, RPAOS, and the cache flush insns CIPAPA and CIGDPAPA. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: SCR_EL3.NS may be RES1Richard Henderson
With RME, SEL2 must also be present to support secure state. The NS bit is RES1 if SEL2 is not present. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Update SCR and HCR for RMERichard Henderson
Define the missing SCR and HCR bits, allow SCR_NSE and {SCR,HCR}_GPF to be set, and invalidate TLBs when NSE changes. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23target/arm: Add isar_feature_aa64_rmeRichard Henderson
Add the missing field for ID_AA64PFR0, and the predicate. Disable it if EL3 is forced off by the board or command-line. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230620124418.805717-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-21target/tricore: Fix ICR.IE offset in RESTORE insnBastian Koppelmann
from ISA v1.6.1 onwards the bit position of ICR.IE changed. ctx->icr_ie_offset contains the correct value for the ISA version used by the vCPU. We also need to exit this tb here, as we might have enabled interrupts. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-9-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Honour privilege changes on PSW writeBastian Koppelmann
the CPU can change the privilege level by writing the corresponding bits in PSW. If this happens all instructions after this 'mtcr' in the TB are translated with the wrong privilege level. So we have to exit to the cpu_loop() and start translating again with the new privilege level. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-8-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Implement privilege level for all insnsBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-7-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Introduce priv tb flagBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-6-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Indirect jump insns use tcg_gen_lookup_and_goto_ptr()Bastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-5-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: ENABLE exit to main-loopBastian Koppelmann
so we can recognize exceptions after re-enabling interrupts. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-4-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Introduce DISAS_TARGET_EXITBastian Koppelmann
this replaces all calls to tcg_gen_exit_tb() and moves them to tricore_tb_stop(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix RR_JLI clobbering reg A[11]Bastian Koppelmann
if A[r1] == A[11], then we would overwrite the destination address of the jump with the return address. Reported-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230621142302.1648383-2-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix helper_ret() not correctly restoring PSWBastian Koppelmann
We are always taking the TRICORE_FEATURE_13 branch as every CPU has TRICORE_FEATURE_13. For CPUs with ISA > 1.3 we have to take the else branch. We fix this by inverting the condition. We check for TRICORE_FEATURE_131, which every CPU except TRICORE_FEATURE_13 CPUs have. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1700 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-5-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add CHECK_REG_PAIR() for insn accessing 64 bit regsBastian Koppelmann
some insns were not checking if an even index was used to access a 64 bit register. In the worst case that could lead to a buffer overflow as reported in https://gitlab.com/qemu-project/qemu/-/issues/1698. Reported-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-4-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Correctly fix saving PSW.CDE to CSA on callBastian Koppelmann
we don't want to save PSW.CDC to the CSA, but PSW.CDE must be saved. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1699 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612113245.56667-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Fix out-of-bounds index in imask instructionSiqi Chen
When translating "imask" instruction of Tricore architecture, QEMU did not check whether the register index was out of bounds, resulting in a global-buffer-overflow. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1698 Reported-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Siqi Chen <coc.cyqh@gmail.com> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230612065633.149152-1-coc.cyqh@gmail.com> Message-Id: <20230612113245.56667-2-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add DISABLE insn variantBastian Koppelmann
this variant saves the 'IE' bit to a 'd' register. The 'IE' bitfield changed from ISA version 1.6.1, so we add icr_ie_offset to DisasContext as with the other DISABLE insn. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-9-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Implement SYCSCALL insnBastian Koppelmann
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1452 Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-8-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add shuffle insnBastian Koppelmann
this is based on code by volumit (https://github.com/volumit/qemu/). Reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 and https://gitlab.com/qemu-project/qemu/-/issues/1452. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-7-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add crc32.b insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-6-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add crc32l.w insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-5-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add LHA insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-4-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Add popcnt.w insnBastian Koppelmann
reported in https://gitlab.com/qemu-project/qemu/-/issues/1667 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-3-kbastian@mail.uni-paderborn.de>
2023-06-21target/tricore: Introduce ISA 1.6.2 featureBastian Koppelmann
we also introduce the tc37x CPU that implements that ISA version. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230614100039.1337971-2-kbastian@mail.uni-paderborn.de>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20meson: Replace CONFIG_SOFTMMU -> CONFIG_SYSTEM_ONLYPhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, use the clearer 'CONFIG_SYSTEM_ONLY' key to check for system emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-9-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/ppc: Check for USER_ONLY definition instead of SOFTMMU onePhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, replace the system emulation check by !user emulation one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230613133347.82210-5-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/m68k: Check for USER_ONLY definition instead of SOFTMMU onePhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, replace the system emulation check by !user emulation one. Invert some if() ladders for clarity. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-4-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20target/tricore: Remove pointless CONFIG_SOFTMMU guardPhilippe Mathieu-Daudé
We don't build any user emulation target for Tricore, only the system emulation. No need to check for it as it is always defined. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20230613133347.82210-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 04:35:23 +0000