Age | Commit message (Collapse) | Author |
|
When cache_info_passthrough is requested, QEMU passes the host values
of the cache information CPUID leaves down to the guest. However,
it blindly assumes that the CPUID leaf exists on the host, and this
cannot be guaranteed: for example, KVM has recently started to
synthesize AMD leaves up to 0x80000021 in order to provide accurate
CPU bug information to guests.
Querying a nonexistent host leaf fills the output arguments of
host_cpuid with data that (albeit deterministic) is nonsensical
as cache information, namely the data in the highest Intel CPUID
leaf. If said highest leaf is not ECX-dependent, this can even
cause an infinite loop when kvm_arch_init_vcpu prepares the input
to KVM_SET_CPUID2. The infinite loop is only terminated by an
abort() when the array gets full.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* MAINTAINERS/.mailmap: update email for Leif Lindholm
* hw/arm: add version information to sbsa-ref machine DT
* Enable new features for -cpu max:
FEAT_Debugv8p2, FEAT_Debugv8p4, FEAT_RAS (minimal version only),
FEAT_IESB, FEAT_CSV2, FEAT_CSV2_2, FEAT_CSV3, FEAT_DGH
* Emulate Cortex-A76
* Emulate Neoverse-N1
* Fix the virt board default NUMA topology
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJ5AbsZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3vyFEACZZ6tRVJYB6YpIzI7rho9x
# hVQIMTc4D5lmVetJnbLdLazifIy60oIOtSKV3Y3oj5DLMcsf6NITrPaFPWNRX3Nm
# mcbTCT5FGj8i7b1CkpEylLwvRQbIaoz2GnJPckdYelxxAq1uJNog3fmoG8nVtJ1F
# HfXVCVkZGQyiyr6Y2/zn3vpdp9n6/4RymN8ugizkcgIRII87DKV+DNDalw613JG4
# 5xxBOGkYzo5DZM8TgL8Ylmb5Jy9XY0EN1xpkyHFOg6gi0B3UZTxHq5SvK6NFoZLJ
# ogyhmMh6IjEfhUIDCtWG9VCoPyWpOXAFoh7D7akFVB4g2SIvBvcuGzFxCAsh5q3K
# s+9CgNX1SZpJQkT1jLjQlNzoUhh8lNc7QvhPWVrbAj3scc+1xVnS5MJsokEV21Cx
# /bp3mFwCL+Q4gjsMKx1nKSvxLv8xlxRtIilmlfj+wvpkenIfIwHYjbvItJTlAy1L
# +arx8fqImNQorxO6oMjOuAlSbNnDKup5qvwGghyu/qz/YEnGQVzN6gI324Km081L
# 1u31H/B3C2rj3qMsYMp5yOqgprXi1D5c6wfYIpLD/C4UfHgIlRiprawZPDM7fAhX
# vxhUhhj3e9OgkbC9yqd6SUR2Uk3YaQlp319LyoZa3VKSvjBTciFsMXXnIV1UitYp
# BGtz8+FypPVkYH7zQB9c7Q==
# =ey1m
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 May 2022 04:57:47 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220509' of https://git.linaro.org/people/pmaydell/qemu-arm: (32 commits)
hw/acpi/aml-build: Use existing CPU topology to build PPTT table
hw/arm/virt: Fix CPU's default NUMA node ID
qtest/numa-test: Correct CPU and NUMA association in aarch64_numa_cpu()
hw/arm/virt: Consider SMP configuration in CPU topology
qtest/numa-test: Specify CPU topology in aarch64_numa_cpu()
qapi/machine.json: Add cluster-id
hw/arm: add versioning to sbsa-ref machine DT
target/arm: Define neoverse-n1
target/arm: Define cortex-a76
target/arm: Enable FEAT_DGH for -cpu max
target/arm: Enable FEAT_CSV3 for -cpu max
target/arm: Enable FEAT_CSV2_2 for -cpu max
target/arm: Enable FEAT_CSV2 for -cpu max
target/arm: Enable FEAT_IESB for -cpu max
target/arm: Enable FEAT_RAS for -cpu max
target/arm: Implement ESB instruction
target/arm: Implement virtual SError exceptions
target/arm: Enable SCR and HCR bits for RAS
target/arm: Add minimal RAS registers
target/arm: Enable FEAT_Debugv8p4 for -cpu max
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Enable the n1 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Enable the a76 for virt and sbsa board use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This extension concerns not merging memory access, which TCG does
not implement. Thus we can trivially enable this feature.
Add a comment to handle_hint for the DGH instruction, but no code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This extension concerns cache speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There is no branch prediction in TCG, therefore there is no
need to actually include the context number into the predictor.
Therefore all we need to do is add the state for SCXTNUM_ELx.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This extension concerns branch speculation, which TCG does
not implement. Thus we can trivially enable this feature.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This feature is AArch64 only, and applies to physical SErrors,
which QEMU does not implement, thus the feature is a nop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Check for and defer any pending virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Virtual SError exceptions are raised by setting HCR_EL2.VSE,
and are routed to EL1 just like other virtual exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Enable writes to the TERR and TEA bits when RAS is enabled.
These bits are otherwise RES0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add only the system registers required to implement zero error
records. This means that all values for ERRSELR are out of range,
which means that it and all of the indexed error record registers
need not be implemented.
Add the EL2 registers required for injecting virtual SError.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This extension concerns changes to the External Debug interface,
with Secure and Non-secure access to the debug registers, and all
of it is outside the scope of QEMU. Indicating support for this
is mandatory with FEAT_SEL2, which we do implement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The only portion of FEAT_Debugv8p2 that is relevant to QEMU
is CONTEXTIDR_EL2, which is also conditionally implemented
with FEAT_VHE. The rest of the debug extension concerns the
External debug interface, which is outside the scope of QEMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use FIELD_DP{32,64} to manipulate id_pfr1 and id_aa64pfr0
during arm_cpu_realizefn.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Update the legacy feature names to the current names.
Provide feature names for id changes that were not marked.
Sort the field updates into increasing bitfield order.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Share the code to set AArch32 max features so that we no
longer have code drift between qemu{-system,}-{arm,aarch64}.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We set this for qemu-system-aarch64, but failed to do so
for the strictly 32-bit emulation.
Fixes: 3bec78447a9 ("target/arm: Provide ARMv8.4-PMU in '-cpu max'")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Instead of starting with cortex-a15 and adding v8 features to
a v7 cpu, begin with a v8 cpu stripped of its aarch64 features.
This fixes the long-standing to-do where we only enabled v8
features for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Previously we were defining some of these in user-only mode,
but none of them are accessible from user-only, therefore
define them only in system mode.
This will shortly be used from cpu_tcg.c also.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This register is present for either VHE or Debugv8p2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Drop zcr_no_el2_reginfo and merge the 3 registers into one array,
now that ZCR_EL2 can be squashed to RES0 and ZCR_EL3 dropped
while registering.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Drop el3_no_el2_cp_reginfo, el3_no_el2_v8_cp_reginfo, and the local
vpidr_regs definition, and rely on the squashing to ARM_CP_CONST
while registering for v8.
This is a behavior change for v7 cpus with Security Extensions and
without Virtualization Extensions, in that the virtualization cpregs
are now correctly not present. This would be a migration compatibility
break, except that we have an existing bug in which migration of 32-bit
cpus with Security Extensions enabled does not work.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
More gracefully handle cpregs when EL2 and/or EL3 are missing.
If the reg is entirely inaccessible, do not register it at all.
If the reg is for EL2, and EL3 is present but EL2 is not,
either discard, squash to res0, const, or keep unchanged.
Per rule RJFFP, mark the 4 aarch32 hypervisor access registers
with ARM_CP_EL3_NO_EL2_KEEP, and mark all of the EL2 address
translation and tlb invalidation "regs" ARM_CP_EL3_NO_EL2_UNDEF.
Mark the 2 virtualization processor id regs ARM_CP_EL3_NO_EL2_C_NZ.
This will simplify cpreg registration for conditional arm features.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220506180242.216785-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Message-Id: <20220505173619.488350-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Capstone should be superior to the old libopcode disassembler,
so we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Capstone should be superior to the old libopcode disassembler, so
we can drop the old file nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220412165836.355850-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
* WHPX support for xcr0
* qga-wss fixes
* Meson conversions
* Removed -soundhw pcspk
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ2CEcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHUAgAq6BXpuqyAMMnrylvt77qwGG37keV
# lxw8aGciztUJIZFi1dAxIuw2ohsFGdfxKKt1sEIUu33OSBeb1I786f2xuLF7t7Am
# An0Jd5I/V/9ClRrz2ITiLOCBzPTU3faY8h382OdnMJCkAFjjF5PIoECZWRBtjPVq
# B4jDKuredgCt4EGDViQr0R5om+bBdHQmHcPHTNIv3UsRu2RhzIieBy4qLBUADIMU
# wJeW0jIdtfE9gwfdjtdom1tDxxKNtYttyIAQY8SpSEGLHzpqfNW0Z3UFGcswIk8g
# QCJpsddJzKivvS3a8pm/3tKkSWmqcgGNH2b3CFEZ26MkkLZIOYiVmPGNqQ==
# =7/z9
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 07 May 2022 12:48:55 AM CDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
pc: remove -soundhw pcspk
configure, meson: move vhost options to Meson
meson: use have_vhost_* variables to pick sources
meson: create have_vhost_* variables
build: move vhost-user-fs configuration to Kconfig
build: move vhost-scsi configuration to Kconfig
build: move vhost-vsock configuration to Kconfig
configure: simplify vhost-net-{user, vdpa} configuration
meson, virtio: place all virtio-pci devices under virtio_pci_ss
configure: omit options with default values from meson command line
meson: pass more options directly as -D
configure: switch directory options to automatic parsing
meson: always combine directories with prefix
meson, configure: move --interp-prefix to meson
meson, configure: move --with-pkgversion, CONFIG_STAMP to meson
meson, configure: move bdrv whitelists to meson
meson, configure: move --tls-priority to meson
configure: switch string options to automatic parsing
configure: move Windows flags detection to meson
configure, meson: move iasl detection to meson
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Support for xcr0 to be able to enable xsave/xrstor. This by itself
is not sufficient to enable xsave/xrstor. WHPX XSAVE API's also
needs to be hooked up.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <MW2PR2101MB1116F07C07A26FD7A7ED8DCFC0780@MW2PR2101MB1116.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We don't model caches, so for l*ct opcodes return tags with all bits
(including Valid) set to 0. For all other opcodes don't do anything.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Create clock input for the xtensa CPU device and initialize its
frequency to the default core frequency specified in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This is the core used in e.g. ESP8266 chips. Importing them
using import_core.sh, with the required files sourced from
https://github.com/espressif/xtensa-overlays
core-lx106.c was generated by the script; the only change is removing
the reference to core-matmap.h which doesn't seem to be available.
Signed-off-by: Simon Safar <simon@simonsafar.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20220423040835.29254-1-simon@simonsafar.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
- gen_jumpi passes target PC to the helper;
- gen_callw_slot uses callinc (1..3);
- gen_brcondi passes immediate field (less than 32 different possible
values) to the helper;
- disas_xtensa_insn passes PC to the helpers;
- translate_entry passes PC, stack register number (0..15) and stack
frame size to the helper;
- gen_check_exclusive passes PC and boolean flag to the helper;
- test_exceptions_retw passes PC to the helper;
- gen_check_atomctl passes PC to the helper;
- translate_ssai passes immediate shift amount (0..31) to the helper;
- gen_waiti passes next PC and an immediate (0..15) to the helper;
use tcg_constant_* for the constants listed above. Fold gen_waiti body
into the translate_waiti as it's the only user.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
FPU conversion opcodes pass scale (range 0..15) and rounding mode to
their helpers. Use tcg_constant_* for them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Numbered special registers are small arrays of consecutive SRs. Use
tcg_constant_* for the SR index.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
dtlb is a boolean flag, use tcg_constant_* for it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Use tcg_contant_* for exception number, exception cause, debug cause
code and exception PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Replace tcg_const_* for numeric literals with tcg_constant_*.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
pc and w are allocated with tcg_const_i32 but not freed in
gen_window_check. Use tcg_constant_i32 for them both.
Fixes: 2db59a76c421 ("target-xtensa: record available window in TB flags")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Today we have the issue where MSR_* values are the 'inverted order'
bit numbers from what the ISA specifies. e.g. MSR_LE is bit 63 but
is defined as 0 in QEMU.
Add a macro to be used to convert from QEMU order to ISA order.
This solution requires less changes than to use the already defined
PPC_BIT macro, which would turn MSR_* in masks instead of the numbers
itself.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-23-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|
|
Add FIELDs macros for msr bits that had an unused msr_* before.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-22-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|
|
msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|
|
msr_hv macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-20-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|
|
msr_ts macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-19-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|